# Profoundd archive — Epstein Files # Bates number: EFTA01225768 # Title: SOFTWARE HOUSE From Tyco Security Products # Dataset: 9 # Pages: 84 # Images: 84 detected # Tags: epstein, doj, dataset-9, image-described # Source PDF: https://profoundd.com/epstein-docs/EFTA01225768/download # Doc viewer: https://profoundd.com/epstein-docs/EFTA01225768 # # Text below is what Profoundd has extracted from the source PDF. # 'ocr-enriched' tag means OCR was applied to scan-only pages. # Image descriptions are AI-generated factual captions (llava:13b). #---------------------------------------------------------------------- === SUMMARY === SOFTWARE HOUSE From Tyco Security Products C•CURE 9000 Version 2.50 UM-119 RU Getting Started Guide REVISION R0 EFTA01225768 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law === EXTRACTED TEXT === SOFTWARE HOUSE From Tyco Security Products C•CURE 9000 Version 2.50 UM-119 RU Getting Started Guide REVISION R0 EFTA01225768 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. MI trademarks not owned by Tyco Security Products are the property of their respective owners, and are used with permission or allowed under applicable laws. Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your regional sales manager. Software version 250 Document Number: UM-138 Revision: RO Release Date: December 2015 This manual is proprietary information of Software House. Unauthorized reproduction of any portion of this manual is prohibited. The material in this manual is for information purposes only. It is subject to change without notice. Software House assumes no responsibility for incorrect information this manual may contain. O 2015 Tyco Security Products. MI rights reserved. EFTA01225769 Table of Contents Preface 5 How to Use this Manual 6 Finding More Information 7 Conventions 8 Software House Customer Support Center 9 Chapter 1 - Introduction 11 Overview 12 Typical Implementation Process 13 Installing the System 15 Configuring C •CURE 9000 16 Object-oriented Management 17 Event Management 17 Navigating in C•CURE 9000 18 Auto Hide 18 Search Button 18 Configure Button Menu 18 Selecting Objects in a Function Pane 19 Selecting Objects from a Hardware Tree 20 Selecting Options & Tools 21 Finding Objects in the Administration Station 22 Filtering Search Results 23 Recall Query 24 Open Files and Closing Tabs 24 Managing the Function Buttons 25 Hiding the Navigation Pane 27 Chapter 2 - User Interfaces 29 Managing Security Objects 30 Partitions 31 Search 31 Context Menus 32 Status Screens 33 Templates for Security Objects 33 Editors 34 C•CURE 9000 Getting Started Guide 3 EFTA01225770 Dynamic Views 34 Administration Station 36 Accessing the Administration Station 37 Logging In and Logging Out 37 Administration Station Tasks 38 Using Panes 39 Area and Zones Pane 39 Card Formats and Keys Pane 40 Options & Tools Pane 41 Data Views Pane 42 Hardware Pane 43 Personnel Pane 47 Configuration Pane 49 Video Pane 51 General Purpose Interface 52 Basic Object Tasks 54 Creating an Object 54 Creating an Object Template 54 Creating an Object from a Template 55 Editing an Object 56 Using the Actions Button 56 Viewing a List of an Object Type 57 Using the Object List Context Menu 58 Deleting an Object 60 Sorting and Filtering the List of Objects 60 Exporting an Object 61 Showing Associations for an Object 62 Monitoring an Object from the Administration or Monitoring Station 65 Object Selection Dialog Box 67 Monitoring Station 71 Accessing the Monitoring Station 71 Monitoring and Maintaining C •CURE 9000 73 Monitoring Station Viewers 73 External Applications 74 Manual Actions 74 Client Configuration 75 Index 77 4 C•CURE 9000 Getting Started Guide EFTA01225771 Preface The C•CURE 9000 Getting Started Guide is for new and experienced security system users. The manual describes how to start using C•CURE 9000, shows how to locate common functions, and lists typical tasks that you can perform. It also lists the various support resources available from Software House. In this preface How to Use this Manual 6 Finding More Information 7 Conventions 8 Software House Customer Support Center 9 C•CURE 9000 Getting Started Guide Preface 5 EFTA01225772 How to Use this Manual How to Use this Manual This manual includes the following sections. Turn to the appropriate section in this manual for the information you need. Chapter 1: Introduction This chapter provides an overview of the C•CURE 9000 application, its various components, and overview of new features, and a typical implementation process. Chapter 2: User Interfaces This chapter describes the various management and monitoring interfaces available to you, including the Administration Station, the Monitoring Station, and the Client configuration interfaces. 6 Preface C•CURE 9000 Getting Started Guide EFTA01225773 Finding More Information Finding More Information You can access C•CURE 900(1 manuals and online Help for more information about C•CURE 9000. Manuals C•CURE 9000 software manuals are available in Adobe PDF format on the C•CURE 9000 DVD. You can access the manuals if you copy the appropriate PDF files from the C•CURE 9000 Installation DVD English \ Manuals folder. The available C•CURE 9000 and Software House manuals are listed in the C•CURE 9000 Installation and Upgrade Guide, and appear as hyperlinks in the online.pdf file on the C•CURE 9000 DVD English \ Manuals folder. These manuals are also available from the Software House Member Center website Online Help You can access C•CURE 9000 Help by pressing Fl or clicking Help from the menu bar in the Administration/Monitoring Station applications. C•CURE 9000 Getting Started Guide Preface 7 EFTA01225774 Conventions Conventions Ibis manual uses the following text formats and symbols. Convention Meaning Bold T his font indicates screen elements, and also ind tales w hen you should take a direct action in a procedure. Bold font describes one of the folowing items: • A oommand or character to type, or • A button or option on the screen to press, or • A key on the keyboard to press • A screen element or name blue cob( text Indicates a hyperlink toa URL, Ora cross-reference toa figure, table, or section n thls guide. Regular Rafe font Indicates a new term. Indicates a variable. The following items are used to indicate important information. NOTE TIP 0 S Indicates a note. Notes call attention to any item of information that may be of special importance. Indicates an alternate method of performing a task. Indicates a caution. A caution contains information essential to avoid damage to the system. A caution can pertain to hardware or software. Indicates a warning. A warning contains information that advises users that failure to avoid a specific action could result in physical harm to the user or to the hardware. Indicates a danger. A danger contains information that users must know to avoid death or serious injury. 8 Preface C•CURE 9000 Getting Started Guide EFTA01225775 Software House Customer Support Center Software House Customer Support Center Telephone Technical Support During the period of the Agreement, the following guidelines apply: • Software House accepts service calls only from employees of the Systems integrator of Record for the installation associated with the support inquiry. Before Calling Ensure that you: • Are the Dealer of record for this account. • Are certified by Software House for this product. • Have a valid license and current Software Support Agreement (SSA) for the system. • Have your system serial number available. • Have your certification number available. Hours Normal Support Hours Monday through F riday. 8:00 to 8:00 , EST. Except holidays. Emergency Support Hours 24 hours/day, seven days a week, 365 daystyear. Requires Enhanced SSA"7 x2r Standby Telephone Support (emergency) provided to Certified Technicians. For another customers. billable on time and materials basis. Minimum charges apply- See MSRP. Phone For telephone support contact numbers for all reg ions. see C•CURE 9000 Gelling Slatted Guide Preface 9 EFTA01225776 Software House Customer Support Center 10 C•CURE 9000 Getting Started Guide EFTA01225777 Introduction This guide describes how to start using C•CURE 9000, shows how to locate common functions, and lists typical tasks that you can perform. . In this guide: Overview 12 Typical Implementation Process 13 Navigating in C•CURE 9000 18 C•CURE 9000 Getting Started Guide Chapter 1 11 EFTA01225778 Overview Overview C•CURE 9000 is a flexible, object-oriented security and event management system that features a variety of customizable interfaces for maintaining the system, and for monitoring the sites that you want to secure. For additional flexibility, C•CURE 9000 provides an option to display these management and monitoring interfaces in the native languages of the people using the system. C•CURE 9000 provides extensive information management capability using Microsoft SQL Server and Microsoft .NET Framework V45. Its distributed client-server architecture is capable of supporting a large array of clients, controllers, and input devices, including various card readers and cameras. C•CURE 9000 lets you shape your security and event management system to meet your specific requirements, and provides you with the power to quickly respond to evolving security challenges. ■ Object-oriented Management on Page 17 ■ Event Management on Page 17 ■ Typical Implementation Process on Page 13 12 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225779 Typical Implementation Process Typical Implementation Process Each C•CURE 9000 installation is unique. You should carefully plan how you want to design and implement your security and event management system. Relationships and dependencies between the various elements of the security system managed in C•CURE 9000 often require specific sequences for configuration, import, export, and monitoring. As part of your planning for implementing C•CURE 9000 at your site, consider the general steps listed in Table 1 on Page 13. These are typical tasks. You and your Software House integrator should adapt the details and sequence of your implementation to suit your specific requirements. . Table 1: Typical C•CURE 9000 Implementation Steps Task Description 1 Installing the System on Page 15 C•CURE 9000 provides an automated installation program and installation wizard. 2 License activation The License Interface is used to activate, validate, and manage your C•CURE 9000 software license. For information. see the Licensing chapter of the C•CURE 9000 Installation and Upgrade Guide or the C•CURE 9000 online help. 3 Configure Controllers Configuring security objects are hardware systems that coordinate communication between the C•CURE 9000 server and the system security hardware. You should configure your controllers before you define the security objects that are connected to them. See Hardware Pane on Page 43 for more information on Hardware configuration. 4 Partitions on Page 31 Partitioning allows you to sub-divide your C•CURE 9000 system into separate compartments so that you can manage specified hardware and security objects separately, and assign Operator Privileges to view/edit these objects, while providing limited or no access to objects outside the Partition. 5 Configure readers A Reader is a hardware device that accepts access requests. To make an access request, a person swipes an access card at the reader or types a Personal Identification Number (PIN) at a reader keypad. The card reader scans the information encoded on the card and sends the card data (or any entered PIN numbers) to the controller, which grants or denies access. You can create a Reader for each type of controller in C•CURE 9000 and use the Reader Editor in the C•CURE 9000 Hardware Pane to configure the Reader. 6 Configure card formats Card Formats are used to specify how access cards are interpreted by card readers in C•CURE 9000. You can assign one or more card formats to a reader to specify the types of cards the reader can accept for access requests. The type of card formats you can assign depend on the capabilities of the reader. You configure Card Formats using the Card Format Editor. I Configure doors Doors are security objects in C•CURE 9000 that represent a securable entry or exit, as well as the hardware used to establish access control for that entry or exit. A Door could be configured to include a switch, a lock, a bond sensor, an entrance or exit reader, or a request to exit device. Also, a Door can be configured to control access using timers and schedules, trigger actions based on the state of the Door (open or closed), and support different access methods, such as, reader and keypad. C•CURE 9000 Getting Started Guide Chapter 1 13 EFTA01225780 Typical Implementation Process Typical C•CURE 9000 Implementation Steps (continued) Task Description 8 Configure elevators Access to floors is managed through Elevator control. You configure an elevator or elevator group through the use of buttons that represent fbors with inputs and outputs. You can add elevators to clearances that are used to control which card holders can access the elevators and floors and at what times. The Elevator Editor in C•CURE 9000 lets you create Elevator objects so that you can access floors. You specify the floors. inputs. and outputs associated with the elevator. You can configure an Elevator to work with an a pC. STAR. or ISC controller. 9 Configure schedules In C•CURE 9000. schedulescan be used throughout the system. Schedules are used to enhance oantrolof a variety of system activities, including system backups, event activation, personnel access, and holidays. A Schedule is used to specify Start and End times for any object to which it is attached. For example, separate Schedules can be attached to a Door to determine when: • The Door should be unlocked • A Reader can be used to access the door • A Reader plus a Keypad code can be used to access the door. 10 Configure personnel records Personnel represent the people who access your site as cardholders and as Operators of the C•CURE 9000 software. You use Personnel records to configure their access privileges. Operator privileges, and design and print their access badges. You define Personnel using the Personnel Editor. 11 Set clearances A clearance defines the locations and times that an access card is valid. In C•CURE 9000, you create clearance objects to define access to specific doors and elevators, on specified schedules, and then assign these clearances to individualcardholders, or groupsof cardholders. 12 Configure events A C•CURE 9000 event is used to define the way C•CURE 9000 responds to state changes that occur to objects in the system. You can use events to perform actions when a state change occurs. You can create events that perform simple functions, like unlocking a door, or a complex functions. like arming. disarming, and monitoring an area. You can link an event directly to a single action or you can link it to multiple events and actions. You define Events using the Events Editor. 13 Set operator privileges You must determine who can access C•CURE 9000. and what operations each individual is albwed to perform. To access C•CURE 9000. a person must have a Windows user account on the C•CURE 9000 server and must be configured as a C•CURE 9000 operator. You can define the Privileges that you assign to Operators using the Privilege Editor. This editor lets you specify the objects, programs, reports, Personnel, and actions that Operators can view and use. For example, you can set up some Operators to manage Personnel only, while others are allowed to monitor access admissions and rejections onty. You define Operators using the Operator Editor in the C•CURE 9000 Configuration Pane.. A privilege is a collection of rights to use access control objects such as readers, doors, inputs, outputs, and schedules. 14 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225781 Typical Implementation Process Typical C•CURE 9000 Implementation Steps (continued) Task Description 14 Configure Badges You can create Badges for Personnel using C•CURE ID. C•CURE ID provides a What You See Is What You Get (WYSIWYG) badge designer that provides complete control over oolor, graphics, text, and backgrounds on both sidesof the badge • Setup your badge printers and configure the badging features you want to use by running Badging Setup from the Options & Tools pane. See Badging Setup fin C•CURE ID help for more information. • Design your Badge Layouts (the way your badges will appear, including portraits. images. signatures, bar codes, magnetic stripes, and biometrics) using the C•CURE ID Badge Designer from the Personnel Pane. • Assign the Badge Layouts to your Personnel, capture portraits, signatures. or fingerprints. and print badges using the Personnel Editor in the Personnel pane. 15 Configure video Video provides comprehensive integration between digital video recorders and C•CURE 9000. You can configure Video Servers, Cameras, Tours, and Views, aswell as CCTV Cameras. Switches. and Protocols. You can also configure Actions in Events for Video and CCTV. You define video objects and actions using the Video Editor. 16 Configure maps You can load and configure a map to unite accesscontrolwith floor plansor other building layout types that represent your facility. C•CURE 9000 allows you to load a CAD drawing and add C•CURE 9000 objects to monitor the state and location of the object. 17 Configure journals, activity logs, and reports The ActivityJournal, often simptycalled the Journal, maintains a record of activity monitored by the system. The Audit Log provides a historyof alloonfiguration changes in the system objectswithin C•CURE 9000. Reports allow you to generate information about any C•CURE 9000 object in a custom format. You Journal in C•CURE 9000 from the Journal View. can view a of system events You can define reports for any object type in C•CURE 9000 using the Report Editor. Installing the System In many cases, C•CURE 9000 is installed and initially configured by an authorized Software House integrator. In addition to installing C•CURE 9000 on a server and one or more clients, the overall installation process can include installing and wiring various hardware devices, including readers, controllers, cameras, and other equipment. Table 2 on Page 15 lists typical installation tasks and documentation that provides relevant guidance. Table 2: Typical Installation Tasks Task Supporting Information Install panels and controllers IS TAR Pro Installation and Configuration Guide IS TAR ex Installation and Configuration Guide Install and connect readers. inputs. and outputs Readers. Inputs. and Outputs (RIO) Guide Install server and client computers Computer vendor and operating system documentation. Install C•CURE 9000 software C•CURE 9000 installation and Upgrade Guide C•CURE 9000 Getting Started Guide Chapter 1 15 EFTA01225782 Typical Implementation Process Table 2: Typical Installation Tasks (continued) Task Supporting Information Lcense C•CURE 9000 C•CURE 9000 Installation and Upgrade Guido C•CURE 9000 online help Configuring C•CURE 9000 After completing the installation and licensing process, you must configure C•CURE 9000 to reflect your security priorities and the specific structure and demands of your site and organization. In most cases, security and system administrators perform the necessary configurations. Each C•CURE 9000 installation is unique. You should carefully plan how you want to design and implement your security and event management system. Relationships and dependencies between the elements of your security system that are managed in C•CURE 9000 often require specific sequences for configuration, import, export, and monitoring. As part of your planning, consider the general steps listed in Table 3 on Page 16 for implementing C•CURE 9000 at your site. These are typical tasks. You and your Software House integrator should adapt the details and sequence of your implementation to suit your specific requirements. Table 3: TypicalC•CURE9000 Implementation Steps Task Supporting Information Configure controllers C•CURE 9000 Hardware Configuration Guide Configure card formats C•CURE 9000 Hardware Configuration Guide Configure readers. C•CURE 9000 Hardware Configuration Guide Configure Inputs and Outputs C•CURE 9000 Hardware Configuration Guide Configure events C•CURE 9000 Software Configuration Guide Configure doors C•CURE 9000 Hardware Configuration Guide Configure elevators C•CURE 9000 Hardware Configuration Guide Configure schedules C•CURE 9000 Software Configuration Guide Configure clearances C•CURE 9000 Personnel Configuration Guide Configure areas and related objects C•CURE 9000 Areas and Zones Guide Configure personnel records C•CURE 9000 Personnel Configuration Guide Configure badging and badge printing C•CURE ID User's Guide Configure Guard Tours C•CURE 9000 Guard Tours Guide 16 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225783 Typical Implementation Process Typical C•CURE 9000 Implementation Steps (continued) Task Supporting Information Set operator privileges C•CURE 9000 Software Configuration Guide Configure video C•CURE 9000 Video Guide Configure maps C•CURE 9000 Data Views Guide Configure journals, activity logs, and reports C•CURE 9000 System Maintenance Guide C•CURE 9000 Data Views Guide Object-oriented Management C•CURE 9000 manages information as objects. In C•CURE 9000, the term object refers to a collection of definable properties that is saved in a database to describe a particular element of your security and event management system. Examples of objects in C•CURE 9000 include: ■ Access control equipment at your site, such as, readers and controllers ■ Items configured in C•CURE 9000, such as, reports, or import definitions ■ Activities monitored by the system, such as, configuration changes or events ■ Persons who access your site, such as, employees, contractors, and visitors You can build a customized security and event management system that satisfies your current security and operational requirements and modify the system as your requirements evolve. See Managing Security Objects on Page 30 for more information. Event Management An Event is an object that lets you link actions, messages, and time activations into one component. Events are triggered by state changes, such as temperature fluctuations, forced doors, or rejected access requests. C•CURE 9000 manages events using a cause and effect strategy. Anything that C•CURE 9000 can monitor can be used to generate an event, and the event can trigger any action. You can schedule events to occur once or to repeat at specific times. You can configure events that perform simple functions,for example, unlocking a door. You can also configure events for complex functions, for example, arming, disarming, and monitoring an entire area. You can link an event to a single action or link it to multiple events and actions. When you configure an event, you assign it an event priority. Event priorities allow you to rank the importance of a particular event relative to other events in the system. Then, if multiple events occur simultaneously, the system compares event priorities to determine the proper sequence of response. C•CURE 9000 provides eight priority ranges, each containing 25 priority settings, for a total of 200 possible event priorities. See Understanding Events in the C•CURE 9000 Software Configuration Guide for more information. C•CURE 9000 Getting Started Guide Chapter! 17 EFTA01225784 Navigating in C•CURE 9000 Navigating in C•CURE 9000 Use the Navigation pane to access objects and information available in the C•CURE 9000 Administration Station. In the Navigation pane, you can select objects currently available in the system, access various editors that allow you to quickly add hardware and configure new objects, search for current and historical information about your system and site, and change the appearance of the Navigation pane. Figure 1 on Page 18 illustrates a typical Navigation pane. Figure 1: Navigation Pane In the C•CURE 9000Ad ministration Station Navigation towbar •"-- • -Cotalguration RASO MOM Auto Hide Stath ck anode. Enalel r Na. Otani r j iskemerl Wawa roe Neaarlikees 1 Cardinals enters 03 Data Visas Ic4 vore mansane omens., 4! cavarlIpTC maims See Hiding the Navigation Pane on Page 27. Search Button See Finding Objects in the Administration Station on Page 22. Configure Button Menu See Managing the Function Buttons on Page 25. ...I_ Auto hide .0_ Search baton Search pan* 0 Ile= Cr, puvr Advanced Search button Manage the Nncton buttons ▪ Cettna job gams STN Cad Pawn ani ran CI Nu ‘...• 1‘.« SitoM OreWetal nylmrr• CO), ra Pagentl ■ OraaalOinm• Mafia 18 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225785 Navigating in CCURE 9000 Selecting Objects in a Function Pane The steps required to select an object in the Navigation pane depend on how the objects are presented. Depending on the object class you select, the Navigation pane presents information as follows: • Icons: to access Options & Tools For details, see Selecting Options & Tools on Page 21. • Function panes: to access Configuration objects, Personnel objects, and Data Views For details, see Managing the Function Buttons on Page 25. • Hardware Trees: to access Hardware and Video objects For details, see Selecting Objects from a Hardware Tree on Page 20. Figure 2 on Page 19 illustrates the various ways to access information in the Navigation pane. Figure 2: Access to Objects in the Navigation Pane Options & Tools LkuSUP gi SodsSOD Gtluaf id Lt DisItteLEgast SA" End Erepckn0scal Env. Sobs 4•IN [reaW it, UgUlap v.so (1 N.s....no. Soh /).^ Ilaip4tha.leOtetb, sy.r.p.,.. Personnel Marl C • iamb Owe Papp-Pim En One IS Saw Ed*. s— Km gpou r Imps Video • t-ets 'dohs Vd.o „1 Spa* awe • a Calareine Saies‘h.PSI La Ts. *vas a"Cin” 2, cCIVStakt.MI MCP Pfeo :era rifiN4 Penn,. lova ors. I ceeca 26'svmpann To Select an Object in a Function Pane 1. Open the Administration Station. For details, see Accessing the Administration Station on Page 37. 2. In the Navigation pane, select the function button for the class of object you want to select. Example: In Figure 2 on Page 19 the Configuration button was selected. 3. From the drop-down menu in the Navigation toolbar, select the type of object you want to select. 4. Search for the object you want to select. Do the following: • In the Selection pane, enter your search criteria. If you do not enter specific criteria, the search returns all saved objects of the selected type. C•CURE 9000 Getting Started Guide Chapter! 19 EFTA01225786 Navigating in C•CURE 9000 • Click the search button. You have the option to display results in a new tab. The search results appear as a dynamic view in the Display pane. 5. To display a pop-up editor to view or modify the object, in the dynamic view, double-click the entry for the object. For more information about managing and monitoring the following in C•CURE 9000, see: ■ Area and Zone objects - C• CURE 9000 Areas and Zones Guide ■ Card Format and Key objects - C• CURE 9000 Personnel Guide ■ Configuration objects - C• CURE 9000 Software Configuration Guide ■ Data Views objects - Data Views Guide ■ Personnel objects - C• CURE 9000 Personnel Guide Selecting Objects from a Hardware Tree To select objects used to manage and monitor hardware, such as card readers or controllers, and video equipment, such as cameras and video servers, select the object from a hardware tree displayed in the Navigation pane. In the tree, objects are represented by various icons. The tree illustrates the hierarchical relationships of the hardware and video equipment managed by your system. You can select objects from the tree, or use a search function to find all objects of a specific type that are present on the tree. The Search function appears as a tab for Hardware (and Video). Click the Search tab to display the Quick and Advanced buttons. Figure 3 on Page 21 illustrates a typical hardware tree. 20 Chapter! C•CURE 9000 Getting Started Guide EFTA01225787 Navigating in C•CURE 9000 Figure 3: Typical Hardware Tree in the Navigation Pane Hardware •kras «emir :IO • Nodose Too I Smith • SS.. Ns • tat ..s4 B% Powniktil • torcrAiere Pow NerAt Con. Pat' 1 • e, as clor••••••••1 • J ete I • 0 Cwt 6,34.tedge le••41 Q Cu-An paxim • moor' ▪ OTC** 1 ECOkOelx 1 CO•on•fri ( apnoea Ica ef Arra adbee radInds sire To Select an Object from a Hardware Tree 1. Open the Administration Station. For details, see Accessing the Administration Station on Page 37. 2. In the Navigation pane, select the function button for the class of object you want. Select either Hardware or Video. 3. Do one of the following: • In the hardware tree, double-click the icon representing the object you want to access. For example, you can click the icon for a specific door, elevator, or camera. When you double-click the object, a pop-up editor displays to let you view or modify the name and description of the object. When you select the object and click New, an editor displays allowing you to configure the object. • Search for the object, or multiple objects. To open the search pane, click the Search tab. By default, only the Quick search pane displays. Selecting Options & Tools The Options & Tools pane does not provide a Navigation toolbar nor does it provide the ability to search for objects. Instead, you make selections using the icons displayed vertically in the pane. C•CURE 9000 Getting Started Guide Chapter! 21 EFTA01225788 Navigating in C•CURE 9000 To Select an Object in Options & Tools 1. Open the Administration Station. For details, see Accessing the Administration Station on Page 37. 2. In the Navigation pane, select the Options & Tools button. 3. In the Options Sr Tools pane, click the icon for the type of object you want to select. For a list of objects available in this pane, see Options & Tools Pane on Page 41. A pop-up dialog box or editor displays to let you view and modify the object you selected. Figure 4 on Page 22 illustrates how C•CURE 9000 displays a selection made in Options & Tools. Figure 4: Object Selection In Optbns & Tools Option:: +I. Tool: gal al a rjas Oar SaG Er Cale Got, tab DiGlarGt away fa ,re Gti Googol. MT. Iltj Weida— Xmania ay isr 411nallmaa. aGra Gat.. tit GeileflablIbe Gollera teem • • roe 4410I V ca. 1J -an ./J (Cue ma itt af Cam Sao i21 JJ warn Oa. Ilai tl ha arch], 61411Ca. Y hall% ▪ Piso.a.12C0 M1 ..121 ad Gan 0toolia141 sl 1 1 A Saps 161 GI a Ore . Ili Finding Objects in the Administration Station There are several ways to find objects in the Administration Station. See table for a description. Table 4: Searching Function Function Description Quick Search Displays by default, except for Options and Tools, and it is on a separate tab for Hardware and Video. To perform a Quick Search, enter your search criteria according to the selection of fields provided by default and dick Search .O ' at the top of the pane. If searching Hardware or Video, click the Search tab first to open the Quick Search pane, then enter your search criteria, and dick Search Advanced Search Provides access to a list of existing queries for the current object type, To perform an Advanced Search, dick the Advanced button (if searching Hardware or Video, dick the Search tab, then click the Advanced button). 22 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225789 Navigating in C•CURE 9000 Searching Function (continued) Function Description Instant Query You may use one of the following options to perform an InstantOu ery for the selected object: 1. Clidanstant Query todisplay theQuery parametersdialog box. On the Query parametersdialog box use the toolbar to create a kst of query aiteria of your choice, or use Browse in the Predefined Query field to select an existing queries of the same type. -or- 1. Click the down-arrow on Instant Query to display the drop-down list and select a subtype of Instant Query if you need a special subtype, and then edit on the Query parameters dialog box, as needed. 2. Click Run to execute the query. Instant Queries cannot be saved, but you can use the Recall Query loon V to open and modify the query content. The Dynamicview wascreated by the query, so you can review and modify the query content when you recall the query. The Instant Query is kept in memory until the dynamicview isdosed. Recap Query Once the query aileria are created, you can click Run to execute the query. The Instant Query cannot be saved, but because the DynamicView wasgenerated from the query, you can review and modify the query content by dicking the Recall Query icon ;0 . New Query Click New Query to open the Query editor and define a new Query. You can save the Query you create, and it will be avaiable in the list of saved Queries. The Options & Tools pane does not provide a search function. The Hardware and Video panes provide the Search function on a separate tab. For details about finding objects in the Options & Tools pane, see Selecting Options & Tools on Page 21. Filtering Search Results If your search returns a large number of results, you can select items that share a specific characteristic by filtering the results. The toolbar in each dynamic view allows you to enable filtering. When you enable filtering, each field in the dynamic view provides options to sort according to the values present in the field. Figure 5 on Page 23 shows a typical dynamic view toolbar with the Filter icon highlighted. Figure 5: DynamIcView Toolbar D %EIRNE). Count II To filter search results, click the Filtering icon. When you enable filtering, the dynamic view displays additional controls that allow you to specify filter criteria. Figure 6 on Page 23 illustrates how the filtering controls appear in a typical dynamic view. Figure 6: Filtering Controls in a DynamicView Ai—i x I vern • 2.30 Oct Me tie blurt) PZ Nam 400 IW Tablit Gomm lAt•0 N0.0 00010,41 Cant Toll t 0 0 C•CURE 9000 Getting Started Guide Chapter! 23 EFTA01225790 Navigating In C•CURE 9000 For details about how to enable and configure filteringsee the Dynamic Views chapter in the C• CURE 9000 Data Views Guide. Recall Query The Recall Query icon on the toolbar allows you to recall the query that was used to create the current list of objects retrieved by the view. Click the icon to recall the query, open the query parameters screen, and see the parameters and values that generated the list. On the parameters screen you may click the browse button to change to a different saved query from the database or click Modify to change the content of the query. Click Run to send the request to the server with the modified query content to retrieve a new list of objects to display in the view. Figure 7: ClIck Recall Query to Display the Query That Created the View Recall Quay con tadoll tat* U. Serve," Option, wn •• h••• fink GO..7 Ilte•MI DTI •••,,, tome Open Files and Closing Tabs On the far right corner of the dynamic view screen is a small arrow, Open Files. Click this icon to display a list of the tabs that are currently open. Select one from the list to activate that tab in the dynamic view. 24 Chapter! C•CURE 9000 Getting Started Guide EFTA01225791 Navigating in C•CURE 9000 Figure 8: Dispiaya List of Open Tabs Open Files displays a list of open tabs. - nr al be beach c oxen :oral% Ase tqts :r•toit bVia