3D-Printed Fixed-Wing Mapping Drone (Instructables / Hackster)

Robots — Open-Source 3D-Printable Designs

2026-07-14

📷 View Wayback snapshot (2026-07-14) ↗ Live URL (may be dead)

Document text

3D-Printed Fixed-Wing Mapping Drone (Instructables / Hackster)
Open-source 3D-printable surveying drone. Source / full build outline: https://www.hackster.io/news/this-fixed-wing-uav-drone-is-almost-entirely-3d-printed-and-you-can-build-it-yourself-aa0e38ed99b5

Almost-entirely 3D-printed fixed-wing UAV for aerial mapping/imaging; full write-up + STLs on Instructables.
MATERIALS/BOM: airframe printed in lightweight LW-PLA, motor mount in PETG, carbon rods stiffening the wings. Electronics: Matek F405-WING V2 flight controller; RadioMaster RP3 receiver; Hobbywing Skywalker 40A ESC; SUNNYSKY X2216 motor; MG90S control-surface servos. See the Instructables write-up (linked) for the full print + assembly steps.