EFTA01216493

User Guide EFTA01216493 © Copyright 2017 HP Development Company. Bluetooth Is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: August 2017 First Edition: April 2017 Document Part Number: 923856.002 Product notice This guide describes features that are common to most products. Some features may not be available on your computer. Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. Windows 10 is automatically updated, which is always enabled. ISP fees may apply and additional requirements may apply over time for updates. Go to for details. To access the latest userguides or manuals for your product, go to support, and select your country. Select Find your product, and then follow the on-screen instructions. Software terms By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. EFTA01216494 Safety warning notice A WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). iii EFTA01216495 iv Safety warning notice EFTA01216496 Processor configuration setting (select products only) car IMPORTANT: Select products are configured with an Intel° Pentium° N3Sxx/N37xx series or a Celeron° N28xx/N29xx/N30xx/N31xx series processor and a Windows° operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v EFTA01216497 vi Processor configuration setting (select products only) EFTA01216498 Table of contents 1 Starting right 1 Best practices 1 More HP resources 2 Getting to know your computer 4 Locating hardware 4 Locating software 4 Right side 5 Left side 6 Display 8 Keyboard area 9 TouchPad 9 Lights 10 Button 11 Special keys 12 Action keys 13 Bottom 14 Labels 15 3 Connecting to a network 16 Connecting to a wireless network 16 Using the wireless controls 16 Airplane mode key 16 Operating system controls 16 Connecting to a WLAN 17 Using HP Mobile Broadband (select products only) 18 Using GPS (select products only) 18 Using Bluetooth wireless devices (select products only) 18 Connecting Bluetooth devices 19 Connecting to a wired network—LAN (select products only) 19 Connecting to your mobile device (select products only) 19 4 Enjoying entertainment features 21 Using the camera 21 Using audio 21 Connecting speakers 21 vii EFTA01216499 Connecting headphones 21 Connecting headsets 22 Using sound settings 22 Using video 22 Connecting video devices by using a VGA cable (select products only) 22 Connecting video devices using an HDMI cable (select products only) 23 Setting up HDMI audio 24 Discovering and connecting to Miracast-compatible wireless displays (select products only) 25 5 Navigating the screen 26 Using TouchPad and touch screen gestures 26 Tap 26 Two-finger pinch zoom 27 Two-finger slide (TouchPad only) 27 Two-finger tap (TouchPad only) 27 Four-finger tap (TouchPad only) 28 Three-finger swipe (TouchPad only) 28 One-finger slide (touch screen only) 29 Using an optional keyboard or mouse 29 Using an on-screen keyboard (select products only) 29 6 Managing power 30 Using Sleep and Hibernation 30 Initiating and exiting Sleep 30 Initiating and exiting Hibernation (select products only) 31 Shutting down (turning off) the computer 31 Using the Power icon and Power Options 32 Running on battery power 32 Using HP Fast Charge (select products only) 32 Displaying battery charge 33 Finding battery information in HP Support Assistant (select products only) 33 Conserving battery power 33 Identifying low battery levels 33 Resolving a low battery level 34 Resolving a low battery level when external power is available 34 Resolving a low battery level when no power source is available 34 Resolving a low battery level when the computer cannot exit Hibernation 34 User-replaceable battery 34 Removing a user-replaceable battery 34 Storing a user-replaceable battery 35 Disposing of a user-replaceable battery 35 viii EFTA01216500 Running on external power 35 7 Maintaining your computer 37 Improving performance 37 Using Disk Defragmenter 37 Using Disk Cleanup 37 Using HP 3D DriveGuard (select products only) 37 Identifying HP 3D DriveGuard status 38 Updating programs and drivers 38 Cleaning your computer 38 Cleaning procedures 38 Cleaning the display 39 Cleaning the sides or cover 39 Cleaning the TouchPad, keyboard, or mouse (select products only) 39 Traveling with or shipping your computer 39 8 Securing your computer and information 41 Using passwords 41 Setting Windows passwords 41 Setting Setup Utility (BIOS) passwords 42 Using Windows Hello (select products only) 42 Using Internet security software 43 Using antivirus software 43 Using firewall software 43 Installing software updates 43 Using HP Touchpoint Manager (select products only) 44 Securing your wireless network 44 Backing up your software applications and information 44 Using an optional security cable (select products only) 44 9 Using Setup Utility (BIOS) 45 Starting Setup Utility (BIOS) 45 Updating Setup Utility (BIOS) 45 Determining the BIOS version 45 Downloading a BIOS update 46 10 Using HP PC Hardware Diagnostics (UEFI) 47 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 48 ix EFTA01216501 11 Backing up, restoring, and recovering 49 Creating recovery media and backups 49 Creating HP Recovery media (select products only) 49 Using Windows tools 50 Restore and recovery 51 Recovering using HP Recovery Manager 51 What you need to know before you get started 51 Using the HP Recovery partition (select products only) 52 Using HP Recovery media to recover 52 Changing the computer boot order 53 Removing the HP Recovery partition (select products only) 53 12 Specifications 54 Input power 54 Operating environment 55 13 Electrostatic Discharge 56 14 Accessibility 57 Supported assistive technologies 57 Contacting support 57 Index 58 EFTA01216502 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer, fun things to do with your computer, and where to find additional HP resources. Best practices After you set up and register the computer, we recommend the following steps to get the most out of your smart investment: • Back up your hard drive by creating recovery media. See Backing up. restoring. and recovering on page 49. • If you haven't already done so, connect to a wired or wireless network. See details in Connecting to a network on pane 16. • Become familiar with the computer hardware and software. For more information, see Getting to know your computer on page 4 and Enioving entertainment features on page 21. • Update or purchase antivirus software. See Using antivirus software on page 43. Best practices 1 EFTA01216503 More HP resources To locate resources that provide product details, how-to information, and more, use this table. Resource Contents Setup Instructions • Overview of computer setup and features HP support • Online chat with an HP technician For HP support, go to • Support telephone numbers • Replacement parts videos (select products only) • Maintenance and service guides • HP service center locations Safety 8 Comfort Guide To access this guide: • Select the Start button. select HP Help and Support, and then select HP Documentation. • Electrical and mechanical safety information • Select the Start button. select HP, and then select HP Documentation. • Go to IMPORTANT: You must be connected to the Internet to access the latest version of the user guide. • Proper workstation setup • Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Regulatory, Safety anti Environmental Notices • Important regulatory notices, including information about proper battery disposal, if needed. To access this document: • Select the Start button. select HP Help and Support, and then select HP Documentation. • Select the Start button. select HP, and then select HP Documentation. Limited Warranty To access this document: • Select the Start button. select HP Help and Support, and then select HP Documentation. A Select the Start button. select HP, and then select HP Documentation. • GO to IMPORTANT: You must be connected to the Internet to access the latest version of the user guide. • Specific warranty information about this computer 'You can find your HP Limited Warranty located with the user guides on your product and/or on the CO or DVD provided in the box. In some countries or regions, HP may provide a printed warranty in the box. For countries or regions where the warranty is not provided Si printed format, you can request a copy from For products purchased in Asia Pacific. you 2 Chapter 1 Starting right EFTA01216504 Resource Contents can write to HP at POD, PO Box 161, Kitchener Road Post Office, Singapore 912006. Include your product name. and your name. phone number. and postal address. More HP resources 3 EFTA01216505 2 Getting to know your computer Your computer features top-rated components. This chapter provides details about your components, where they're located, and how they work. Locating hardware To find out what hardware is installed on your computer: ♦ Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer. For information about system hardware components and the system BIOS version number, press fn+esc (select products only). Locating software To find out what software is installed on your computer: ♦ Select the Start button. - or - Right-click the Start button, and then select Apps and Features. 4 Chapter 2 Getting to know your computer EFTA01216506 Right side roeComponent (I) Description Power light (2) /co Drive light %MD • On: The computer is on. • Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components. • Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power. • Blinking white: The hard drive is being accessed. (3) D Memory card reader Reads optional memory cards that enable you to store, manage, share, or access information. To insert a card: 1. Hold the card label-side up, with connectors facing the computer. 2. Insert the card Into the memory card reader, and then press in on the card until it is firmly seated. To remove a card: • Pull the card out of the memory card reader. DO MB 2.0 port Comects a IlS8 device, such as a cell phone, camera, activity ••• tracker, or smartwatch, and provides data transfer. (5) Optical drive (select products only) Depending on your computer model, reads an optical disc or reads and writes to an optical disc. (6) Optical drive eject button (select products only) Releases the optical drive disc tray. (7) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Right side S EFTA01216507 Left side Component Description (1) 11 Power connector Connects an AC adapter. (2) AC adapter and battery tight • White: The AC adapter Is connected and the battery is fully charged. • Blinking white: The AC adapter is disconnected and the battery has reached a low battery level. • Amber: The AC adapter is connected and the battery is charging. • Off: The battery is not charging. (3) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (41) 101 External monitor port (select products only) Connects an external VGA monitor or projector. (5) estif ftlaiS (network) hack/status lights Connects a network cable. • White: The network is connected. • Amber: Activity is occurring on the network (6) HDMI port Connects an optional video or audio device, such as a high- Pao definition television, any compatible digital or audio component, or a high-speed High-Definition Multimedia Interface (HDMI) device. (7) USB 3.x SuperSpeed ports (2) Connect a USB device, such as a cell phone, camera, activity SSec- tracker, or smartwatch, and provide high-speed data transfer. (B) 0 Audio-out (headphone)fAudio-in (microphone) combo jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional standalone microphones. 6 Chapter 2 Getting to know your computer EFTA01216508 Component Description WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide: ♦ Select the Start button. select HP Help and Support. and then select HP Documentation. NOTE: When a device is connected to the jack, the computer speakers are disabled. Left side 7 EFTA01216509 Display g NOTE: Refer to the illustration that most closely matches your computer. Component DesalptIon (1) WLAN antemas• Send and receive wireless signals to communicate with wireless local area networks (V/LANs). (2) Camera Light (3) Camera On: One or more cameras are in use. Allows you to video chat, record video, and record still images. To use your camera, see Usina the camera on page 21. Some cameras also allow a facial recognition logon to Windows, instead of a password logos. For more information, see Using Windows Hello (select products only) on page 42. NOTE: Camera functions vary depending on the camera hardware and software installed on your product. (0) Internal microphone Records sound. •The antennas are not visible from the outside of the computer, and antenna location varies. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wkeless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide: ♦ Select the Start button, select HP Help and Support, and then select HP Documentation. 8 Chapter 2 Getting to know your computer EFTA01216510 Keyboard area TouchPad 0- 0— Jo Component Description (1) TouchPad zone Reads your finger gestures to move the pointer or activate items on the screen. NOTE: For more information, see Usino TouchPad and touch screen gestures on page 26. (2) Left TouchPad button Functions like the left button on an external mouse. (3) Right TouchPad button Functions like the right button on an external mouse. Keyboard area 9 EFTA01216511 Lights NOTE: Refer to the illustration that most closely matches your computer. 2 I I III • MN • MO MO MI IN • • • • • • • • • MI • MID ••• ill NM • MTh • MEI MIME • • • • I 1/4 2 II I • • IN • IN••=I. • IN III II • In IN MAI 'NE••••••••• M. • MI MIE•Mfl IM • Component Description 0) Caps lock light On: Caps lock Is on, which switches the key input to all capital letters. (2) 0 Mute light • Amber: Computer sound is off. • Off: Computer sound is on. 10 Chapter 2 Getting to know your computer EFTA01216512 Button g NOTE: Refer to the illustration that most closely matches your computer. IIII• n10 •Ill• MO WO IN 10••••••••••••••Ill. MASAN." ME•• li••=• SEISM -u IN•IMON•ON•EIMI IM ~wwwwwwwwwwwwwt■ =MMENNEMEN••M. w~wwww.wwwfl■ MOM •••=II Component Description arh Power button 1/4.1 • When the computer is off, press the button to turn on the computer. • When the computer is on, press the button briefly to initiate Sleep. • When the computer is in the Sleep state. press the button briefly to exit Sleep. • When the computer is in Hibernation, press the button briefly to exit Hibernation. CAUTION: Pressing and holding down the power button results in the loss of unsaved information. If the computer has stopped responding and shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. To team more about your power settings, see your power options: • Right-click the Power icon Options. and then select Power Keyboard area 11 EFTA01216513 Special keys 27 NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key (3) ail Windows key • Executes specific functions when pressed in combination with another key. Opens the Start menu. NOTE: Pressing the Windows key again will close the Start menu. (4) Action keys Execute frequently used system functions. NOTE: On select products, the IS action key turns the keyboard backlight feature off or on. (s) num lock key Alternates between the navigational and numeric functions on the integrated numeric keypad. (6) Integrated numeric keypad A separate keypad to the right of the alphabet keyboard. When num lock is pressed, the keypad can be used like an external numeric keypad. NOTE: If the keypad function is active when the computer is turned off, that function Is reinstated when the computer is turned back on. 12 Chapter 2 Getting to know your computer EFTA01216514 Action keys An action key performs the function indicated by the icon on the key. To determine which keys are on your product, see Special keys on pane 12. • To use an action key, press and hold the key. koe Description Opens the HP Support Assistant app. Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. IOI gen Switches the screen image between display devices connected to the system. For example. if a monitor is connected to the computer, repeatedly pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Turns the keyboard backlight off or on. NOTE: To conserve battery power, turn off this feature. Mutes or restores speaker sound 4-Decreases speaker volume incrementally while you hold down the key. 4+ Increases speaker volume incrementally while you hold down the key. IN Plays the previous track of an audio CD or the previous section of a OVO or a Blu-ray Disc (BD). Starts, pauses, or resumes playback of an audio CD, a ND or a BD. NI Plays the next track of an audio CO or the next section of a DVD or a BD. Turns the airplane mode and wireless feature on or off. NOTE: The airplane mode key is also referred to as the wireless button. NOTE: A wireless network must be set up before a wireless connection is possible. Keyboard area 13 EFTA01216515 Bottom • 0 Component Description (1) a Battery lock Locks the battery in the battery bay. (2) Battery bay Holds the battery. (3) a Battery release latch Releases the battery. (4) Speakers (2) Produce sound. (S) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool Internal components and prevent overheating. It is normal for the Internal fan to cycle on and off during routine operation. 14 Chapter 2 Getting to know your computer EFTA01216516 Component Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. ri IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, or on the back of the display. • Service label—Provides important information to identify your computer. When contacting support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. I. Baal )00(XXXXX IIIIMIUMNIM /00300000ZX • Produce )0000(XXX Warranty ly1y0y Model =0000( tli Serial. XX/0000(X IItrod.traxoa.KO hi)por likdd VON [1111111011 IuuuuuIIIIIIIII Component (I) Serial number 12) Product number (3) Warranty period (41) Model number (select products only) MP Long Model Name Malel XXX X XXXX X ProdlD XXXXXXXXXX SW: XXX XXXXXXX warranty 1y1y0y (I) HP product name (select products only) (2) Model name (select products only) 01 Productnumber (4) Serial number (S) Warranty period • Regulatory label(s)—Provide(s) regulatory information about the computer. • Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Labels 15 EFTA01216517 3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Your computer may be equipped with one or more of the following wireless devices: • WLAN device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. • HP Mobile Broadband Module—Gives you wireless connectivity over a wireless wide area network (WWAN), a much larger area. Mobile network operators install base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. • Bluetootho device—Creates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close together—typically within 10 meters (approximately 33 feet) of each other. Using the wireless controls You can control the wireless devices in your computer using one or more of these features: • Airplane mode key (also called wireless button or wireless key) (referred to in this chapter as airplane mode key) • Operating system controls Airplane mode key The computer may have an airplane mode key, one or more wireless devices, and one or two wireless lights. All the wireless devices on your computer are enabled at the factory. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls: 1. Type c:ontro: pane: in the taskbar search box, and then select Control Panel. 2. Select Network and Internet. and then select Network and Sharing Center. 16 Chapter 3 Connecting to a network EFTA01216518 Connecting to a WLAN g NOTE: When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service. To connect to a WLAN, follow these steps: 1. Be sure that the WLAN device is on. 2. Select the network status icon in the taskbar, and then connect to one of the available networks. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and then select Next to complete the connection. in' NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point. g NOTE: If you do not see the WLAN you want to connect to, right-click the network status icon in the taskbar, and then select Open Network and Sharing Center. Select Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. 3. Follow the on-screen instructions to complete the connection. After the connection is made, select the network status icon at the far right of the taskbar, to verify the name and status of the connection. g NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Connecting to a wireless network 17 EFTA01216519 Using HP Mobile Broadband (select products only) Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer, when used with a mobile operator's network, gives you the freedom to connect to the Internet, send e-mail. or connect to your corporate network without the need for Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service. The number may be printed on a label located on the bottom of your computer, inside the battery bay. under the service door, or on the back of the display. - or - You can find the number following these steps: 1. From the taskbar, select the network status icon. 2. Select View Connection Settings. 3. Under the Mobile broadband section. select the network status icon. Some mobile network operators require the use of a subscriber identity module (SIM) card. A SIM card contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM card that is preinstalled. If the SIM card is not preinstalled, it may be included with the HP Mobile Broadband documents provided with your computer, or the mobile network operator may provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer. Using GPS (select products only) Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location, speed, and direction information to GPS-equipped systems. To enable GPS, make sure location is enabled under the Location setting. 1. Type oc:a t Ion in the taskbar search box, and then make the selection for location. 2. Follow the on-screen instructions for using location settings. Using Bluetooth wireless devices (select products only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following: • Computers (desktop, notebook) • Phones (cellular, cordless, smartphone) • Imaging devices (printer, camera) • Audio devices (headset, speakers) • Mouse • External keyboard 18 Chapter 3 Connecting to a network EFTA01216520 Connecting Bluetooth devices Before you can use a Bluetooth device, you must establish a Bluetooth connection. 1. Type t):.).e tooth in the taskbar search box, and then select Bluetooth and other devices settings. 2. Turn on Bluetooth, if it is not already turned on. 3. Select your device from the list, and then follow the on-screen instructions. ff° NOTE: If the device requires verification, a pairing code is displayed. On the device you are adding, follow the on-screen instructions to verify that the code on your device matches the pairing code. For more information, refer to the documentation provided with the device. g NOTE: If your device does not appear in the list, be sure that Bluetooth on that device is turned on. Some devices may have additional requirements; refer to the documentation provided with the device. Connecting to a wired network —LAN (select products only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office. Connecting to a LAN requires an RJ-45 (network) cable and a network jack or an optional docking device or expansion port, if there is no R.1-45 jack on the computer. To connect the network cable, follow these steps: 1. Plug the network cable into the network jack (1) on the computer. 2. Plug the other end of the network cable into a network wall jack (2) or router. g NOTE: If the network cable contains noise suppression circuitry (3), which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the computer. G_ 0 Connecting to your mobile device (select products only) HP Orbit provides a way to easily move files, pictures, videos, and other information between your mobile device and computer. g NOTE: Before setting up and using HP Orbit, make sure your computer and mobile device are connected to the same Wi-Fi network. Connecting to a wired network—LAN (select products only) 19 EFTA01216521 To set up HP Orbit: 1. Download and install the HP Orbit app from the app store for your mobile device. 2. Open the HP Orbit app on your mobile device. 3. On your computer, select the Start button, and then select HP Orbit. — Or - Open HP Orbit from the taskbar icon. 4. Follow the on-screen instructions to enter a pairing code and continue the installation. After the devices have been paired. HP Orbit will remember the connection and allow you to send files between the devices whenever they are both connected to the same Wi-Fi network. To transfer files from your mobile device to your computer: 1. Open the HP Orbit app on your mobile device. 2. Select the type of file. 3. Select the file, and then select Send. When the transfer is complete, the file appears on HP Orbit Canvas on your computer. To transfer files from your computer to your mobile device: 1. Open the HP Orbit app on your computer. 2. Drag and drop the file onto HP Orbit Canvas on your computer, and then follow the on-screen instructions. When the transfer is complete, the file appears on HP Orbit Canvas on your mobile device. For more information about using HP Orbit, refer to the HP Orbit software Help. er NOTE: Help is not available in all languages. 1. Open the HP Orbit app. 2. Select the Settings icon Cr, and then select Help. For more information about supported platforms and languages, go to 20 Chapter 3 Connecting to a network EFTA01216522 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the camera, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, TV, speakers, or headphones. Using the camera Your computer has one or more cameras that enable you to connect with others for work or play. Cameras may be front facing, rear facing, or pop up. See Getting to know your computer on page 4 for camera details. Most cameras allow you to video chat, record video, and record still images. Some also provide HD (high- definition) capability, apps for gaming, or facial recognition software like Windows Hello. See Securing your computer and information on page 41 for details about using Windows Hello. To use your camera, type camera in the taskbar search box, and then select Camera from the list of applications. Using audio You can download and listen to music, stream audio content (including radio) from the web, record audio, or mix audio and video to create multimedia. You can also play music CDs on the computer (on select models) or attach an external optical drive to play CDs. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out (headphone)/audio-in (microphone) combo jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HOMI audio on page 24. Before connecting speakers, lower the volume setting. Connecting headphones Si WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document: ♦ Select the Start button, select HP Help and Support, and then select HP Documentation. You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Using the camera 21 EFTA01216523 Connecting headsets A WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document: ♦ Select the Start button, select HP Help and Support, and then select HP Documentation. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio- out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using sound settings Use sound settings to adjust system volume, change system sounds, or manage audio devices. To view or change sound settings: ♦ Type control pane: in the taskbar search box, select Control Panel, select Hardware and Sound, and then select Sound. Your computer may include an enhanced sound system by Bang & Olufsen, B&O Play, or another provider. As a result, your computer may include advanced audio features that can be controlled through an audio control panel specific to your sound system. Use the audio control panel to view and control audio settings. ♦ Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound, and then select the audio control panel specific to your system. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. • IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your video features, refer to HP Support Assistant. Connecting video devices by using a VGA cable (select products only) g NOTE: To connect a VGA video device to your computer, you need an VGA cable, purchased separately. To see the computer screen image on an external VGA monitor or projected for a presentation, connect a monitor or projector to the computer's VGA port. 1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as shown. 22 Chapter 4 Enjoying entertainment features EFTA01216524 2. Press 14 to alternate the screen image between 4 display states: • Pt screen only: View the screen image on the computer only. • Duplicate: View the screen image simultaneously on both the computer and the external device. • Extend: View the screen image extended across both the computer and the external device. • Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. er NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select the Settings icon O, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Connecting video devices using an HDMI cable (select products only) er NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions: 1. Connect one end of the HDMI cable to the HDMI port on the computer. Using video 23 EFTA01216525 HDMI 2. Connect the other end of the cable to the high-definition TV or monitor. 3. Press 14 to alternate the computer screen image between 4 display states: • PC screen only: View the screen image on the computer only. • Duplicate: View the screen image simultaneously on both the computer and the external device. • Extend: View the screen image extended across both the computer and the external device. • Second screen only: View the screen image on the external device only. Each time you press 14, the display state changes. g NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select the Settings icon Cr, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps: 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2. On the Playback tab, select the name of the digital output device. 3. Click Set Default, and then click OK. To return the audio stream to the computer speakers: 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. 2. On the Playback tab, click Speakers. 3. Click Set Default, and then click OK. 24 Chapter 4 Enjoying entertainment features EFTA01216526 Discovering and connecting to Miracast-compatible wireless displays (select products only) To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow the steps below. To open Miracast: ♦ Type project in the taskbar search box, and then click Project to a second screen. Click Connect to a wireless display, and then follow the on-screen instructions. Using video 25 EFTA01216527 5 Navigating the screen You can navigate the computer screen in one or more of the following ways: • Use touch gestures directly on the computer screen • Use touch gestures on the TouchPad • Use an optional mouse or keyboard (purchased separately) • Use an on-screen keyboard • Use a pointing stick Using TouchPad and touch screen gestures The TouchPad helps you navigate the computer screen and control the pointer using simple touch gestures. You can also use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse. To navigate a touch screen (select products only), touch the screen directly using gestures described in this chapter. You can also customize gestures and view demonstrations of how they work. Type control panel in the taskbar search box, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. NOTE: Unless noted, gestures can be used on the TouchPad or a touch screen (select products only). Tap Use the tap/double-tap gesture to select or open an item on the screen. • Point to an item on the screen, and then tap one finger on the TouchPad zone or touch screen to select the item. Double-tap an item to open it. 26 Chapter 5 Navigating the screen EFTA01216528 Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. • Zoom out by placing two fingers apart on the TouchPad zone or touch screen and then moving your fingers together. • Zoom in by placing two fingers together on the TouchPad zone or touch screen and then moving your fingers apart. Two-finger slide (TouchPad only) Use the two-finger slide to move up, down, or sideways on a page or image. • Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. Two-finger tap (TouchPad only) Use the two-finger tap to open the menu for an object on the screen. g NOTE: The two-finger tap performs the same function as right-clicking with the mouse. • Tap two fingers on the TouchPad zone to open the options menu for the selected object. Using TouchPad and touch screen gestures 27 EFTA01216529 Four-finger tap (TouchPad only) Use the four-finger tap to open the action center. • Tap four fingers on the Touchpad to open the action center and view current settings and notifications. Three-finger swipe (TouchPad only) Use the three-finger swipe to view open windows and to switch between open windows and the desktop. • Swipe 3 fingers away from you to see all open windows. • Swipe 3 fingers toward you to show the desktop. • Swipe 3 fingers left or right to switch between open windows. 28 Chapter 5 Navigating the screen EFTA01216530 One-finger slide (touch screen only) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. • To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. • To move an object, press and hold your finger on an object, and then drag your finger to move the object. Using an optional keyboard or mouse An optional keyboard or mouse allows you to type, select items, scroll, and perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions. Using an on-screen keyboard (select products only) 1. To display an on-screen keyboard, tap the keyboard icon in the notification area, at the far right of the taskbar. 2. Begin typing. gr NOTE: Suggested words may be displayed above the on-screen keyboard. Tap a word to select it. Er NOTE: Action keys and hot keys do not display or function on the on-screen keyboard. Using an optional keyboard or mouse 29 EFTA01216531 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power and an external power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Some power management features described in this chapter may not be available on your computer. Using Sleep and Hibernation a, CAUTION: Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession. This practice is particularly important when you travel with your computer. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external media card. Windows has two power-saving states, Sleep and Hibernation. • Sleep—The Sleep state is automatically initiated after a period of inactivity. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Initiating and exiting Sleep on page 30. • Hibernation —The Hibernation state is automatically initiated if the battery reaches a critical level. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Initiating and exiting Hibernation (select products only) on page 31. Initiating and exiting Sleep You can initiate Sleep in any of the following ways: • Close the display (select products only). • Select the Start button, select the Power icon, and then select Sleep. • Press the Sleep hot key; for example, f n+f3 (select products only). You can exit Sleep in any of the following ways: • Briefly press the power button. • If the computer is closed, raise the display (select products only). • Press a key on the keyboard (select products only). • Tap the TouchPad (select products only). When the computer exits Sleep, your work returns to the screen. J NOTE: If you have set a password to be required on exiting Sleep, you must enter your Windows password before your work returns to the screen. 30 Chapter 6 Managing power EFTA01216532 Initiating and exiting Hibernation (select products only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. Right-click the Power icon n and then select Power Options. 2. In the left pane, select Choose what the power buttons do (wording may vary by product). 3. Depending on your product, you can enable Hibernation for battery power or external power in any of the following ways: • Power button—Under Power and sleep buttons and lid settings (wording may vary by product), select When I press the power button, and then select Hibernate. • Sleep button (select products only)—Under Power and sleep buttons and lid settings (wording may vary by product), select When I press the sleep button, and then select Hibernate. • Lid (select products only)—Under Power and sleep buttons and tid settings (wording may vary by product), select When I close the lid, and then select Hibernate. • Power menu—Select Change Settings that are currently unavailable, and then, under Shutdown settings, select the Hibernate check box. The Power menu can be accessed by selecting the Start button. a. Select Save changes. ♦ To initiate Hibernation, use the method that you enabled in step 3. ♦ To exit Hibernation, briefly press the power button. It NOTE: If you have set a password to be required on exiting Hibernation, you must enter your Windows password before your work returns to the screen. Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and the computer. Shut down the computer when it will be unused and disconnected from external power for an extended period. The recommended procedure is to use the Windows Shut down command. et NOTE: If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly pressing the power button. 1. Save your work and close all open programs. 2. Select the Start button, select the Power icon, and then select Shut down. Shutting down (turning off) the computer 31 EFTA01216533 If the computer is unresponsive and you are unable to use the