Document text
Introduction
Instrument Cluster
Warning and control lights
Gauges
Entertainment Systems
AM/FM stereo cassette with CD
AM/FM stereo with in-dash six CD
Rear seat controls
Rear seat entertainment system
Navigation system
Climate Controls
Manual heating and air conditioning
Automatic temperature control
Auxiliary passenger climate control
Rear window defroster
Lights
Headlamps
Turn signal control
Bulb replacement
Driver Controls
Windshield wiper/washer control
Power windows
Mirrors
Speed control
Message center
Locks and Security
Keys
Locks
Anti-theft system
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Table of Contents
4
10
10
15
18
18
33
38
43
56
92
92
96
100
101
102
102
105
107
114
114
121
122
124
135
149
149
149
150
Table of Contents
Seating and Safety Restraints
Seating
Safety restraints
Airbags
Child restraints
Tires, Wheels and Loading
Tire Information
Tire Inflation
Changing tires
Lug Nut Torque
Tire Pressure Monitoring System (TPMS)
Vehicle loading
Trailer towing
Recreational towing
Driving
Starting
Brakes
Air suspension
Transmission operation
Roadside Emergencies
Getting roadside assistance
Hazard flasher switch
Fuel pump shut-off switch
Fuses and relays
Jump starting
Wrecker towing
Customer Assistance
Reporting safety defects (U.S. only)
Cleaning
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
162
162
177
191
199
213
215
217
221
228
237
242
249
255
256
256
260
263
269
287
287
288
288
289
299
305
307
315
316
Table of Contents
Maintenance and Specifications 323
Engine compartment 325
Engine oil 326
Battery 330
Engine Coolant 332
Fuel information 338
Air filter(s) 352
Part numbers 353
Refill capacities 354
Lubricant specifications 357
Accessories 363
Index 366
All rights reserved. Reproduction by any means, electronic or mechanical
including photocopying, recording or by any information storage and retrieval
system or translation in whole or part is not permitted without written
authorization from Ford Motor Company. Ford may change the contents without
notice and without incurring obligation.
Copyright © 2005 Ford Motor Company
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Introduction
CALIFORNIA Proposition 65 Warning
WARNING: Engine exhaust, some of its constituents, and
certain vehicle components contain or emit chemicals known to
the State of California to cause cancer and birth defects or other
reproductive harm. In addition, certain fluids contained in vehicles and
certain products of component wear contain or emit chemicals known
to the State of California to cause cancer and birth defects or other
reproductive harm.
CONGRATULATIONS
Congratulations on acquiring your new Ford. Please take the time to get
well acquainted with your vehicle by reading this handbook. The more
you know and understand about your vehicle, the greater the safety and
pleasure you will derive from driving it.
For more information on Ford Motor Company and its products visit the
following website:
e In the United States: www.ford.com
e In Canada: www.ford.ca
e In Australia: www.ford.com.au
e In Mexico: www.ford.com.mx
Additional owner information is given in separate publications.
This Owner’s Guide describes every option and model variant available
and therefore some of the items covered may not apply to your
particular vehicle. Furthermore, due to printing cycles it may describe
options before they are generally available.
Remember to pass on this Owner’s Guide when reselling the vehicle. It
is an integral part of the vehicle.
Fuel pump shut-off switch: In the event of an accident the
safety switch will automatically cut off the fuel supply to the
engine. The switch can also be activated through sudden vibration (e.g.
collision when parking). To reset the switch, refer to the Fuel pump
shut-off switch in the Roadside Emergencies chapter.
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Introduction
SAFETY AND ENVIRONMENT PROTECTION
A Warning symbols in this guide
How can you reduce the risk of personal injury to yourself or others? In
this guide, answers to such questions are contained in comments
highlighted by the warning triangle symbol. These comments should be
read and observed.
A Warning symbols on your vehicle
When you see this symbol, it is
imperative that you consult the
relevant section of this guide before L i}
touching or attempting adjustment
of any kind.
Protecting the environment
We must all play our part in
protecting the environment. Correct
vehicle usage and the authorized
disposal of waste, cleaning and
lubrication materials are significant
steps towards this aim. Information in this respect is highlighted in this
guide with the tree symbol.
BREAKING-IN YOUR VEHICLE
Your vehicle does not need an extensive break-in. Try not to drive
continuously at the same speed for the first 1,000 miles (1,600 km) of
new vehicle operation. Vary your speed frequently in order to give the
moving parts a chance to break in.
Drive your new vehicle at least 500 miles (800 km) before towing a
trailer. Additionally, during the first 500 miles (800 km) that you tow a
trailer, do not drive over 70 mph (112 km/h) and do not make starts at
full throttle. This style of driving will help the engine and other parts of
your vehicle break in at the heavier loads.
Do not add friction modifier compounds or special break-in oils during
the first few thousand miles (kilometers) of operation, since these
additives may prevent piston ring seating. See Engine oil in the
Maintenance and Specifications chapter for more information on oil
usage.
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Introduction
SPECIAL NOTICES
Emission warranty
The New Vehicle Limited Warranty includes Bumper-to-Bumper
Coverage, Safety Restraint Coverage, Corrosion Coverage, and 6.0L
Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible
for Emissions Defect and Emissions Performance Warranties. For a
detailed description of what is covered and what is not covered, refer to
the Warranty Guide that is provided to you along with your Owner's
Guide.
Service Data Recording
Service data recorders in your vehicle are capable of collecting and
storing diagnostic information about your vehicle. This potentially
includes information about the performance or status of various systems
and modules in the vehicle, such as engine, throttle, steering or brake
systems. In order to properly diagnose and service your vehicle, Ford
Motor Company, Ford of Canada, and service and repair facilities may
access vehicle diagnostic information through a direct connection to your
vehicle when diagnosing or servicing your vehicle.
Event Data Recording
Other modules in your vehicle — event data recorders — are capable of
collecting and storing data during a crash or near crash event. The
recorded information may assist in the investigation of such an event.
The modules may record information about both the vehicle and the
occupants, potentially including information such as:
e how various systems in your vehicle were operating;
e whether or not the driver and passenger seatbelts were buckled;
e how far (if at all) the driver was depressing the accelerator and/or the
brake pedal;
e how fast the vehicle was traveling; and
e where the driver was positioning the steering wheel.
To access this information, special equipment must be directly connected
to the recording modules. Ford Motor Company and Ford of Canada do
not access event data recorder information without obtaining consent,
unless pursuant to court order or where required by law enforcement,
other government authorities or other third parties acting with lawful
authority. Other parties may seek to access the information
independently of Ford Motor Company and Ford of Canada.
6
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Introduction
Special instructions
For your added safety, your vehicle is fitted with sophisticated electronic
controls.
Please read the section Supplemental restraint system (SRS)
in the Seating and Safety Restraints chapter. Failure to follow
the specific warnings and instructions could result in personal injury.
Front seat mounted rear-facing child or infant seats should
NEVER be placed in front of an active passenger air bag.
Using your vehicle with a snowplow
Do not use this vehicle for snowplowing.
Your vehicle is not equipped with a snowplowing package.
Notice to owners of pickup trucks and utility type vehicles
Utility vehicles have a significantly higher rollover rate than
other types of vehicles.
Before you drive your vehicle, please read this Owner’s Guide carefully.
Your vehicle is not a passenger car. As with other vehicles of this type,
failure to operate this vehicle correctly may result in loss of vehicle
control, vehicle rollover, personal injury or death.
Be sure to read Driving off road in the Driving chapter.
MIDDLE EAST/NORTH AFRICA VEHICLE SPECIFIC INFORMATION
For your particular global region, your vehicle may be equipped with
features and options that are different from the ones that are described
in this Owner’s Guide; therefore, a supplement has been supplied that
complements this book. By referring to the pages in the provided
supplement, you can properly identify those features, recommendations
and specifications that are unique to your vehicle. Refer to this
Owner’s Guide for all other required information and warnings.
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Introduction
These are some of the symbols you may see on your vehicle.
Vehicle Symbol Glossary
Safety Alert
A
ik
T
fe
oe Tether iN
Anti-Lock Brake System
Powertrain Malfunction
Fasten Safety Belt
Air Bag-Side
Child Seat Installation
Warning
Master Lighting Switch W-
Fog Lamps-Front
Fuel Pump Reset
Windshield
Defrost/Demist
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
See Owner’s Guide
Air Bag-Front
Child Seat
Child Seat Lower
Anchor
Brake System
Brake Fluid -
Non-Petroleum Based
Speed Control
Hazard Warning Flasher
Fuse Compartment
Windshield Wash/Wipe
Rear Window
Defrost/Demist
ry
É
O @
Q
~S”
SD JO
xoen
oe ee
2) @
Introduction
Vehicle Symbol Glossary
Power Windows
Front/Rear
Child Safety Door
Lock/Unlock
Panic Alarm
Engine Coolant
Do Not Open When Hot
Avoid Smoking, Flames,
or Sparks
Explosive Gas
Power Steering Fluid
Emission System
Passenger Compartment
Air Filter
Check fuel cap
ABA
Power Window Lockout
Interior Luggage
Compartment Release
Symbol
Engine Oil
Engine Coolant
Temperature
Battery
Battery Acid
Fan Warning
Maintain Correct Fluid
Level
Engine Air Filter
Jack
Low tire warning
1e
?
sur
RS BD LTE
CY
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
WARNING LIGHTS AND CHIMES
Standard instrument cluster
Warning lights and gauges can alert you to a vehicle condition that may
become serious enough to cause expensive repairs. A warning light may
illuminate when a problem exists with one of your vehicle’s functions.
Many lights will illuminate when you start your vehicle to make sure the
bulb works. If any light remains on after starting the vehicle, have the
respective system inspected immediately.
Service engine soon: The Service
engine soon indicator light
illuminates when the ignition is first
turned to the ON position to check
the bulb. Solid illumination after the engine is started indicates the On
Board Diagnostics System (OBD-II) has detected a malfunction. Refer to
On board diagnostics (OBD-II) in the Maintenance and Specifications
chapter. If the light is blinking, engine misfire is occurring which could
10
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
damage your catalytic converter. Drive in a moderate fashion (avoid
heavy acceleration and deceleration) and have your vehicle serviced
immediately.
Under engine misfire conditions, excessive exhaust temperatures
could damage the catalytic converter, the fuel system, interior
floor coverings or other vehicle components, possibly causing a fire.
Electronic throttle control (if
equipped): [lluminates when the wa
engine has defaulted to a
‘limp-home’ operation. Report the
fault to a dealer at the earliest opportunity.
On vehicles equipped with a message center, “ENGINE FAILSAFE
MODE” or “CHECK ELECTRONIC THROTTLE CONTROL” will be
displayed, refer to Message Center in the Driver Controls chapter.
Brake system warning light: To (
confirm the brake system warning (1) ()
light is functional, it will
R E t iluminate when the BRAKE
ignition is turned to the ON position
when the engine is not running, or in a position between ON and START,
or by applying the parking brake when the ignition is turned to the ON
position. If the brake system warning light does not illuminate at this
time, seek service immediately from your dealership. Illumination after
releasing the parking brake indicates low brake fluid level and the brake
system should be inspected immediately by your servicing dealership.
Driving a vehicle with the brake system warning light on is
dangerous. A significant decrease in braking performance may
occur. It will take you longer to stop the vehicle. Have the vehicle
checked by your dealer immediately.
continues to flash, a malfunction has
Anti-lock brake system: If the
ABS light stays illuminated or (ABs)
been detected, have the system
11
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
serviced immediately. Normal braking is still functional unless the brake
warning light also is illuminated.
Air bag readiness: If this light fails @ o,
to iluminate when ignition is turned ?
to ON, continues to flash or remains IN
on, have the system serviced
immediately. A chime will also sound when a malfunction in the
supplemental restraint system has been detected.
Safety belt: Reminds you to fasten
your safety belt. A chime will also
sound to remind you to fasten your
safety belt.
Charging system: Illuminates when
the battery is not charging properly.
Check gage: Illuminates when any
of the following conditions has CHECK
occurred: GAGE
e The engine coolant temperature
is high.
e The engine oil pressure is low.
with the Tire Pressure
Monitoring System): Iluminates
when your tire pressure is low. If
the light remains on at start up or
while driving, the tire pressure should be checked. Refer to Inspecting
and Inflating Your Tires in the Tires, Wheels and Loading chapter.
When the ignition is first turned to ON, the light will illuminate for 3
seconds to ensure the bulb is working. If the light does not turn ON,
have the system inspected by your servicing dealership. For more
information on this system, refer to Understanding Your Tire Pressure
Monitoring System in the Tires, Wheels and Loading chapter.
Low tire warning (if equipped 0
O
Low fuel (if equipped):
Iluminates when the fuel level in
the fuel tank is at or near empty
(refer to Fuel gauge in this
chapter).
12
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
Iluminates when the fuel cap may
not be properly installed. Continued
driving with this light on may cause
the Service engine soon warning
light to come on. Refer to Fuel
filler cap in the Maintenance and Specifications chapter.
Low washer fluid (if equipped): ee aa
Illuminates when the windshield
washer fluid is low. <?
Speed control: Illuminates when
the speed control is activated. Turns
off when the speed control system
is deactivated.
Check fuel cap (if equipped):
wv
O/D off: [lluminates when the 0/D
overdrive function of the
transmission has been turned off, OFF
refer to the Driving chapter. If the
light flashes steadily or does not illuminate, have the transmission
serviced soon, or damage may occur.
AdvanceTrac®(if equipped):
Illuminates when the AdvanceTrac® =N
with RSC system is active. If the
light remains on, have the system ) )
serviced immediately, refer to the
Driving chapter for more
information.
Four wheel drive low (if 4x4
equipped): Illuminates when
four-wheel drive low is engaged. If LOW
the light fails to illuminate when the
ignition is turned ON, continues to flash or remains on, have the system
serviced immediately.
13
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
Four wheel drive high (if 4x4
equipped): Illuminates when
four-wheel drive is engaged. If the HIGH
light fails to iluminate when the
ignition is turned ON, continues to flash or remains on, have the system
serviced immediately.
Door ajar (if equipped): R
Iluminates when the ignition is in AAI
the ON position and any door, 2 SA
liftgate or the liftgate glass is open. =
Turn signal: Illuminates when the
left or right turn signal or the a o>
hazard lights are turned on. If the
indicators stay on or flash faster, check for a burned out bulb.
D
Key-in-ignition warning chime: Sounds when the key is left in the
ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.
High beams: Illuminates when the
high beam headlamps are turned on.
Headlamps on warning chime: Sounds when the headlamps or parking
lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.
Door ajar warning chime: Sounds when any door, liftgate or the
liftgate glass is opened (or not fully closed).
14
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
GAUGES
I D Bape
[n
ea
HIGH
PRND21
Speedometer: Indicates the
current vehicle speed.
Engine coolant temperature
gauge: Indicates engine coolant
temperature. At normal operating
temperature, the needle will be in
the normal range (between “H” and
“C”). If it enters the red section, the
engine is overheating. Stop the
vehicle as soon as safely possible,
switch off the engine and let the engine cool.
Never remove the coolant reservoir cap while the engine is
running or hot.
Odometer: Registers the total miles (kilometers) of the vehicle.
e With Mini Message Center
Nu XXX °F
15
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
e With Full Message Center
Refer to Message Center in the
Driver Controls chapter on how to NI, =
switch the display from Metric to Nu 888888 mi
English.
Trip odometer: Registers the miles (kilometers) of individual journeys.
e With Mini Message Center
Press the SELECT/RESET control
once to switch from the odometer to
the trip odometer. Press the control
again to select Trip 1 and Trip 2 features. To reset the trip, press and
hold the control again until the trip reading is 0.0 miles.
e With Full Message Center ma AAG
Press and release the message nu OOOGEG mi
center INFO button until TRIP
mode appears in the display. Press
the control again to select Trip 1
and Trip 2 features. Press the
RESET button to reset.
Tachometer: Indicates the engine
speed in revolutions per minute.
Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.
Battery voltage gauge: Indicates
the battery voltage when the
ignition is in the ON position. If the
pointer moves and stays outside the
normal operating range, have the
vehicle’s electrical system checked
as soon as possible.
16
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
Engine oil pressure gauge:
Indicates engine oil pressure. The
needle should stay in the normal
operating range (between “L” and
“H”). If the needle falls below the
normal range, stop the vehicle, turn
off the engine and check the engine
oil level. Add oil if needed. If the oil
level is correct, have your vehicle checked at your dealership or by a
qualified technician.
Fuel gauge: Indicates
approximately how much fuel is left
in the fuel tank (when the ignition
is in the ON position). The fuel
gauge may vary slightly when the
vehicle is in motion or on a grade.
Refer to Falling the tank in the
Maintenance and Specifications
chapter for more information.
The FUEL icon and arrow indicates which side of the vehicle the fuel
door is located.
17
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD (IF EQUIPPED)
(18) @) Q (2)
( al } ("m œ) TAPE eal (asses) T
= («sx >) > Œ] [ez ie sme a\G cap SF
1. EJ (Eject): Press to stop and
eject a tape.
2. EJ (Eject): Press to stop and
eject a CD.
3. BASS: Allows you to increase or
decrease the audio system’s bass
output. Press BASS then press SEL
to decrease K] or increase p the bass levels.
TREB (Treble): Allows you to
increase or decrease the audio
system’s treble output. Press TREB
then press SEL to decrease A or increase > the treble levels.
18
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
4. BAL (Balance): Allows you to
shift speaker sound between the
right and left speakers. Press BAL
then press SEL to shift sound to the left < or right > :
FADE: Allows you to shift speaker
sound between the front and rear
speakers. Press FADE then press
SEL to shift the sound to the rear <Q or the front P> .
5. COMP (Compression): In CD aan
mode, press to bring soft and loud
passages together for a more
consistent listening level. Press again to deactivate.
SHUF (Shuffle): Press to play CD
tracks in random order. Press again
to deactivate random play.
BAL E |
6. Memory preset stations: To set
a memory preset station, tune the
radio to the desired station, then
press and hold the memory preset
control until the sound returns.
7. SEL (Select): Use to adjust
bass, treble, balance and fade levels.
REW FF SIDE
1 2 3
,
:
i =
8. Side: Press to play the alternate
side of the tape.
B
Dolby: DO Dolby® noise
reduction: Reduces tape noise and
hiss; press to activate/deactivate.
The Dolby® noise reduction system is manufactured under license from
Dolby Laboratories Licensing Corporation. Dolby® and the double-D
symbol are registered trademarks of Dolby® Laboratories Licensing
Corporation.
9. REW (Rewind): Works in tape ae]
and CD modes. E
In tape mode, radio play continues
until rewind is stopped (with the TAPE control) or the beginning of the
tape is reached.
19
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
In CD mode, REW control reverses the CD within the current track.
FF (Fast Forward): Works in tape
and CD modes.
In the tape mode, tape direction
automatically reverses when the end of the tape is reached.
In CD mode, FF advances the CD within the current track.
10. MUTE: Press to mute the
playing media. Press again to return
to playing media.
Note: If your vehicle is equipped with the Reverse Sensing System, the
audio volume (if set above a certain level) will be lowered to a preset
value when the Reverse Sensing tone is sounded.
RDS: (Radio Data System): Press RDS to access the clock mode and the
RDS features.
RDS must be turned ON to activate the Traffic, Find Program Type and
Show functions. To turn RDS ON, put the radio in FM mode then press
the RDS button until RDS OFF appears then press SEL control to toggle
function ON.
e Traffic: Allows you to hear traffic broadcasts. With the feature ON,
press SEEK or SCAN to find a station broadcasting a traffic report Cif
it is broadcasting RDS data). Traffic information is not available in
most U.S. markets. To activate, press RDS until TRAFFIC OFF
appears in the display then use SEL control to toggle function ON.
e FIND Program type: Allows you to search RDS-equipped stations for
a certain category of music format: Classic, Country, Info, Jazz, Oldies,
R&B, Religious, Rock, Soft, Top 40. Press RDS until FIND appears in
the display then use SEL control to scroll through the desired music
types. Press SEEK or SCAN to find program type.
e Show TYPE: Allows you to display radio station call sign or format.
To activate, press RDS until SHOW appears in the display, then use
the SEL to select NAME or TYPE.
The Federal Communications Commission (FCC) and the Canadian Radio
and Telecommunications Commission (CRTC) recommend that FM radio
broadcasters use RDS technology to transmit information. FM radio
stations are independently operated and individually elect to use RDS
technology to transmit station ID and program type as desired.
e Setting the clock: Press RDS until SELECT HOUR or SELECT MINS
is displayed. Press SEL to increase (<q ) or decrease P ). Press
RDS again to disengage the clock mode.
20
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
11. AUTOSET: Press to set first six
strong stations into AM, FM1 or |
FM2 memory buttons; press again to
return to the original preset
stations. If there are less than six strong stations available on the
frequency band, the remaining memory preset controls will all store the
last strong station available.
12. SCAN: Works in radio, tape and (scan )
CD modes. Press SCAN for a brief
sampling of radio stations, tape
selections or CD tracks. Press again to deactivate scan mode.
13. SEEK: Works in radio, tape and
CD modes. Press to access the
previous < or next > listenable
radio station, tape selection or CD track.
14. TUNE: Works in radio mode.
Press <q > to manually advance
down/up the frequency band.
15. AM/FM/CD: Press AM/FM to (awe ae
select a radio frequency. Press while s
in tape or CD mode to return to
radio mode. Press CD to enter CD mode and to play a CD already in the
system. Press AM/FM to switch between AM, FM1, or FM2 memory
preset stations. Press the CD control to toggle between CD and DVD (if
equipped).
16. Power/volume: Press to turn
TUNE
the system on/off. Turn to x “A
raise/lower the volume. O
If the volume is set above a certain
level and the ignition is turned off,
the volume will come back on at a
“nominal” listening level when the ignition switch is turned back on.
Audio power can also be turned on by pressing the AM/FM select control
or the TAPE/CD select control.
Speed sensitive volume (if equipped): Automatically changes the
volume with vehicle speed to compensate for road and wind noise. The
recommended level is 1-3. Level 0 turns the speed sensitive volume off
and level 7 is the maximum setting.
21
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
To engage the speed sensitive volume feature, press and hold the volume
control for five seconds (with the radio on). Press SEL to
increase /decrease> volume compensation levels. The selected level
will appear in the display.
17. TAPE: Press to begin tape play.
Press during fast forward or rewind
to stop fast forward or rewind
function.
18. CD door: Insert the disc with the playing side down and printed side
up.
CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ball point pens may damage CDs. Please contact your
dealer for further information.
19. Tape door: Insert the tape facing the right.
22
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
PREMIUM IN-DASH SIX CD SOUND SYSTEM (IF EQUIPPED)
TE
SHUF J = { bbe ) { < SEEK > )| | REw FF )) (cour) (G 6) IB S
BAss|]|| å =) ma È
TREB|||| w A
AUDIOPHILE SATELLITE READY AM/FM STEREO IN-DASH SIX CD
RADIO (IF EQUIPPED)
CENAA
(E) (sean) (scan) a DISC, (PS TNE) (< sex > } SEEK > CR e) (< Fab) FF
(14) (Goo) COS =
PUSH ON
O ON
Bass||| 4 J|||B;
SEL
TREB|/| w pos) a
)OOOOOM E) =a
G6)
1. Seek: Press and release
SEEK <q / for previous/next
strong station, selection or track.
23
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
2. REW (Rewind): In CD mode,
press to reverse within the current
track.
Fast forward: In CD mode, press until desired selection is reached.
TEXT: TEXT is only available when
equipped with Satellite radio. Your
Audiophile radio comes equipped
with Satellite ready capability. The kit to enable Satellite reception is
available through your Ford dealer. Detailed Satellite instructions are
included with the dealer installed kit.
Press > to view current song and <q to view current artist.
Dealer installed satellite kit only available in the continental United
States.
3. DSP (Digital Signal a i-
"P
le
Processing): Press DSP to access l
the Ambiance menu. Ambiance gives !
the feeling of “being there” to your
music, creating increased clarity as well as an open and spacious feel to
the music. Press SEL to engage/disengage. Turn the volume control to
increase/decrease the level of ambiance.
Occupancy: Press DSP again to change the occupancy mode to optimize
sound for ALL SEATS, DRIVER SEAT or REAR SEATS. Press SEL to
scroll through settings.
COMP (Compression): The compression feature operates in CD mode
and brings soft and loud CD passages together for a more consistent
listening level. Press the COMP control until COMP ON is displayed.
4. Mute: Press to MUTE playing ©
media; press again return to playing Ft
media
Note: If your vehicle is equipped with the Reverse Sensing System, the
audio volume (if set above a certain level) will be lowered to a preset
value when the Reverse Sensing tone is sounded.
5. Eject: Press to eject a CD. Press æ
and hold to eject all loaded discs. =
6. Bass: Press BASS; then press
SEL vy / A to decrease/increase
the bass output.
tla) |
24
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Boe oat,
SEL vy / A to decrease/increase
Treble: Press TREB; then press [| <
£
the treble output. i
Balance and Fade controls to adjust
levels and set the clock.
8. Balance: Press BAL; then press A es
SEL W / A to shift sound to the + !
right/left speakers. s
Fade: Press FADE; then press =) jos
SEL W / A to shift sound to the m + ES !
rear/front speakers. a
9. Menu: Press MENU and SEL to im 45
access clock mode, RDS on/off, (=u) + | =|
Traffic announcement mode, Ll e-
Program type mode, and Shuffle
mode.
7. Select: Use with Bass, Treble,
The Federal Communications Commission (FCC) and the Canadian Radio
and Telecommunications Commission (CRTC) recommend that FM radio
broadcasters use RDS technology to transmit information. FM radio
stations are independently operated and individually elect to use RDS
technology to transmit station ID and program type as desired.
Traffic: Allows you to hear traffic broadcasts. With the feature ON, press
SEEK or SCAN to find a station broadcasting a traffic report (if it is
broadcasting RDS data).Traffic information is not available in most
U.S. markets.
FIND Program type: Allows you to search RDS-equipped stations for a
certain category of music format: Classic, Country, Info, Jazz, Oldies,
R&B, Religious, Rock, Soft, Top 40.
Show TYPE: Displays the station’s call letters and format.
Shuffle: If equipped with an Audiophile system, press to play tracks in a
random order when in CD mode. Press MENU until SHUF appears in the
display. Use SEL to select SHUF DISC, SHUF TRAC or SHUF OFF.
Compression: Brings soft and loud CD passages together for a more
consistent listening level when in CD model. Press MENU until
compression status is displayed. Press the SEL control to enable the
25
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
compression feature when COMP OFF is displayed. Press the SEL
control again to disable the feature when COMP ON is displayed.
Setting the clock: Press MENU until SELECT HOUR or SELECT MINS
is displayed. Use SEL to manually increase A ) or decrease (Vv ) the
hours/minutes. Press MENU again to disengage clock mode.
10. Memory presets: To set a
station: Select frequency band OOOOOR
AM/FM; tune to a station, press and
hold a preset button until sound
returns.
11. SAT Gif equipped): Your
Audiophile radio comes equipped
with Satellite Ready capability. The
kit to enable the Satellite reception is available through your Ford dealer.
Detailed satellite instructions are included with the dealer installed kit.
If equipped with Satellite Radio, press to select from SAT1/SAT2/SATS.
Dealer installed satellite kit only available in the continental United
States.
CD: Press to select CD mode. Press aT
the CD control to toggle between Gils)
CD and DVD (if equipped).
12. AM/FM: Press to select AM/FM
frequency band.
Autoset: Allows you to set the
strongest local radio stations without losing your original manually set
preset stations for AM/FM1/FM2 . Press and momentarily hold AM/FM.
AUTOSET will flash on the display. When the six strongest stations are
filled, the station stored in preset 1 will begin playing. If there are less
than six strong stations, the system will store the last one in the
remaining presets. Press again to disengage.
13. Power/volume: Press to turn
ON/OFF; turn to increase or
decrease volume levels.
`
LY
=
NX
PUSH ON
Speed sensitive volume: Radio
volume changes automatically and
slightly with vehicle speed to
compensate for road and wind noise. Recommended level is 1-3. Level 0
turns the feature off and level 7 is the maximum setting.
26
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Press and hold the volume control for five seconds. Then press SEL to
increase A ) or decrease (Vv ) the volume setting. The level will
appear in the display.
14. Load: Press to load a CD. Press
and hold to load up to six discs.
15. CD AUX: Press to access CD or
AUX mode.
CD units are designed to play
commercially pressed 4.75 in (12 cm) audio compact discs only.
Due to technical incompatibility, certain recordable and
re-recordable compact discs may not function correctly when
used in Ford CD players. Irregular shaped CDs, CDs with a
scratch protection film attached, and CDs with homemade paper
(adhesive) labels should not be inserted into the CD player. The
label may peel and cause the CD to become jammed. It is
recommended that homemade CDs be identified with permanent
felt tip marker rather than adhesive labels. Ballpoint pens may
damage CDs. Please contact your dealer for further information.
SHUF (Shuffle): If equipped with
a Premium system, press to play
tracks in random order. Press again
to deactivate random play.
16. Sean: Press SCAN to hear a
brief sampling of radio stations, SAT
channels or CD tracks. Press again
to stop.
17. Disc/Tune: Press or » to
manually tune down/up the radio
frequency band, or to listen to the
previous/next track on the CD.
CAT: CAT is only available when equipped with Satellite Radio. Your
Audiophile radio comes equipped with Satellite ready capability. The kit
to enable Satellite reception is available through your Ford dealer.
Detailed Satellite instructions are included with the dealer installed kit.
Press to scroll through a list of categories, (i.e., Pop, Rock, Country, Hip
Hop, R&B, Dance, Jazz/Standards, Classical, Variety, News, Sports and
Entertainment).
Dealer installed satellite kit only available in the continental United
States.
27
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
For information regarding SIRIUS Satellite Radio, please call toll-free
888-539-SIRIUS (888-539-7474) or visit the SIRIUS website at
www.siriusradio.com
PREMIUM SATELLITE COMPATIBLE AM/FM
STEREO/CASSETTE/SINGLE CD/MP3 RADIO (IF EQUIPPED)
(16) 18) (19)
_—__|__
Sc
m_a) E SIFE Dimore] (4) BASS TREB |
1. EJ (Eject): Press to stop and S
eject a tape.
< SEEK > wen) (ox SCAN < TEXTISEL > BAL FADE A { 4 )
2. EJ (Eject): Press to stop and ED)
eject a CD.
3. BASS: Allows you to increase or
decrease the audio system’s bass
output. Press BASS then press
TEXT/SEL to decrease E| or
increase P the bass levels.
TREB (Treble): Allows you to
increase or decrease the audio
system’s treble output. Press TREB
then press TEXT/SEL to
decrease A or increase > the treble levels.
28
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
4. BAL (Balance): Allows you to
shift speaker sound between the
right and left speakers. Press BAL
then press TEXT/SEL to shift sound
to the left <Q or right > .
FADE: Allows you to shift speaker
sound between the front and rear
speakers. Press FADE then press
TEXT/SEL to shift the sound to the
rear <Q or the front > :
5. SHUF (Shuffle): Press to play
CD/MP3 tracks in random order.
Press again to deactivate random
play.
RPT (Repeat): Press to repeat the
current CD/MP3 track.
H
af
6. Memory preset stations: To set a memory preset station, tune the
radio to the desired station, then press and hold the memory preset
control until the sound returns.
7. TEXT/SEL: Select: Use to adjust
bass, treble, balance and fade levels.
TEXT: TEXT is available when equipped with Satellite radio. Your radio
comes equipped with Satellite ready capability. The kit to enable Satellite
reception is available through your dealer. Detailed Satellite instructions
are included with the dealer installed kit. TEXT is also available with ID3
tags on MP3 files. Dealer installed satellite kit only available in the
continental United States.
8. Folder: Press to reverse (<q ) or
advance A ) MP3 folders.
9. REW (Rewind): Works in tape
and CD modes.
In tape mode, radio play continues
until rewind is stopped (by pressing REW again) or the beginning of the
tape is reached.
In CD mode, REW control reverses the CD within the current track.
29
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
FF (Fast Forward): Works in tape =
and CD modes.
In the tape mode, tape direction
automatically reverses when the end of the tape is reached. Fast forward
is stopped by pressing FF again.
In CD mode, FF advances the CD within the current track.
10. AUX: Press to toggle between
the current playing media and DVD
(if equipped).
SCAN: Press for a brief sampling of
radio stations, tape selections or CD
tracks. Press again to deactivate
scan mode.
11. Phone/MUTE: Press to mute
the playing media. Press again to
return to the playing media.
12. MENU: Press to access the [=]
following options:
e AUTOSET: Press MENU until AUTOSET is displayed. Press
TEXT/SEL to turn this function on or off. AUTOSET allows you to set
the strongest local radio stations without losing your original manually
set preset stations for AM/FM1/FM2. If there are less than six strong
stations available on the frequency band, the remaining memory
preset controls will all store the last strong station available.
Setting the clock: Press MENU until SELECT HOUR or SELECT
MINS is displayed. Press SEL to increase (<q ) or decrease P ).
e Speed sensitive volume (if equipped): Radio volume changes
automatically and slightly with vehicle speed to compensate for road
and wind noise. Recommended level is 1-3. Level 0 turns the feature
off and level 7 is the maximum setting. To engage the speed sensitive
volume feature, press MENU until speed VOL X appears in the display.
Press TEXT/SEL to increase (<q ) decrease P ) volume
compensation levels. The selected level will appear in the display.
e Compression: In CD/MP3 modes, select to bring loud and soft
passages together for a more consistent listening level.
30
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e Folder/Track mode: In MP3 mode, press MENU until MODE appears
in the display. Use SEL to toggle between FOLDER (only tracks within
the selected folder are accessible) or TRACK (all tracks on the disc
are accessible).
13. TUNE/CAT: In radio mode,
press to manually advance up/down a
the frequency band. In satellite
radio mode, press CAT for a listing of available music categories.
CAT: CAT is only available when equipped with Satellite Radio. Your
radio comes equipped with Satellite ready capability. The kit to enable
Satellite reception is available through your dealer. Detailed Satellite
instructions are included with the dealer installed kit. Dealer installed
satellite kit only available in the continental United States.
For information regarding SIRIUS Satellite Radio, please call toll-free
888-539-SIRIUS (888-539-7474) or visit the SIRIUS website at
www.siriusradio.com
14. SEEK: Works in radio, tape and
CD modes. Press to access the
previous (<q ) or next P )
listenable radio station, tape selection or CD track.
15. BAND: Press to toggle between
AM/FM1/FM2 frequency bands.
Press while in tape or CD mode to
return to radio mode.
CD: Press CD to enter CD mode
and to play a CD already in the
system.
16. Power/volume: Press to turn =s
the system on/off. Turn to K `A
raise/lower the volume. O
If the volume is set above a certain
level and the ignition is turned off,
the volume will come back on at a
“nominal” listening level when the ignition switch is turned back on.
Audio power can also be turned on by pressing BAND or the TAPE or
CD controls.
31
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
17. TAPE: Press to begin tape play.
Press to switch tape side (1 to 2) or
(2 to 1).
18. CD slot: Insert the disc with the playing side down and printed side
up.
CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ballpoint pens may damage CDs. Please contact your
dealer for further information.
19. Tape door: Insert the tape facing the right.
The Dolby® noise reduction system is manufactured under license from
Dolby Laboratories Licensing Corporation. Dolby® and the double-D
symbol are registered trademarks of Dolby® Laboratories Licensing
Corporation.
32
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
AUDIOPHILE/PREMIUM SATELLITE COMPATIBLE AM/FM STEREO
IN-DASH SIX CD/MP3 RADIO (IF EQUIPPED)
24)
AE COCE Ger) A E]
(20) Gen) GAH ©
=
E
BAND|||| sat a (2) F (3 E) E) EF.) PESAT (5) E) menu]
5 6b © OOOOH a
1. SEEK: Press and release
SEEK <q / Pe for previous/next
strong station, selection or track.
2. TEXT: The filename (Fi), song
title (So), artist text (Ar) or album
text (AL) may be viewed while
playing an MP3 selection. When MP3 selection text is shown on the
message display its corresponding text indicator (Fi, So, Ar, or AL) is
shown in the elapsed time display. Press TEXT to scroll through the text
fields. The display will scroll all of the text in the current field before
changing to the next field. (TEXT must be pressed within 3 seconds of
the previous button press to proceed to the next/last text display.)
TEXT is available when equipped with Satellite radio or with ID3 tags on
MP3 files. Your Audiophile radio comes equipped with Satellite ready
capability. The kit to enable Satelite reception is available through your
dealer. Detailed Satellite instructions are included with the dealer
installed kit. Dealer installed satellite kit only available in the
continental United States.
33
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
3. AUX: Press to toggle between the
current playing media and DVD (if
equipped).
4. MUTE: Press to MUTE playing
media; press again to return to
playing media
5. EJ: Press to eject a CD. Press EJ Œ
and a memory preset to eject a
specific disc. Press and hold to eject
all loaded discs.
6. Bass: Press BASS; then press [=]
SEL vy / A to decrease/increase
the bass output.
Treble: Press TREB; then press a |<
SEL W / & to decrease/increase = t
the treble output.
E
F
Aat
| g
m
fy
7. Select: Use with Bass, Treble,
Balance and Fade controls to adjust
levels, set the clock and other menu
functions.
8. Balance: Press BAL; then press ean <
SEL W / A to shift sound to the j g
left/right speakers.
Fade: Press FADE; then press Ej
|+ i
mol |
2
m
m
<
SEL v / Å to shift sound to the j
rear/front speakers.
9. Menu: Press and hold MENU to J4
access RDS on/off, Traffic ~] + i
announcement mode, Program type Ta-
mode and use SEL to toggle
functions ON/OFF.
The Federal Communications Commission (FCC) and the Canadian Radio
and Telecommunications Commission (CRTC) recommend that FM radio
broadcasters use RDS technology to transmit information. FM radio
stations are independently operated and individually elect to use RDS
technology to transmit station ID and program type as desired.
34
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Traffic (if equipped): Allows you to hear traffic broadcasts. With the
feature ON, press SEEK or SCAN to find a station broadcasting a traffic
report (if it is broadcasting RDS data).Traffic information is not
available in most U.S. markets.
FIND Program type (if equipped): Allows you to search
RDS-equipped stations for a certain category of music format: Classic,
Country, Info, Jazz, Oldies, R&B, Religious, Rock, Soft, Top 40.
Show TYPE (if equipped): Displays the station’s call letters and
format.
Compression: Brings soft and loud CD passages together for a more
consistent listening level when in CD mode. Press MENU until
compression status is displayed. Press the SEL control to enable the
compression feature when COMPRESS OFF is displayed. Press the SEL
control again to disable the feature when COMPRESS ON is displayed.
Occupancy mode (if equipped): Press SEL to select ALL, DRIVER or
REAR SEAT occupancy mode.
Folder/Track Mode: In MP3 mode, press MENU until MODE appears in
the display. Use SEL to toggle between FOLDER (only tracks within
selected folder are accessible) or TRACK (all tracks on the disc are
accessible).
Autoset: Allows you to set the strongest local radio stations without
losing your original manually set preset stations for AM/FM1/FM2 . Press
MENU until AUTOSET appears in the display. Press SEL to toggle
ON/OFF. When the six strongest stations are filled, the station stored in
preset 1 will begin playing. If there are less than six strong stations, the
system will store the last one in the remaining presets. Press again to
disengage.
Speed sensitive volume: Radio volume changes automatically and
slightly with vehicle speed to compensate for road and wind noise.
Recommended level is 1-3. Level 0 turns the feature off and level 7 is
the maximum setting.
Press MENU until SPEED VOL X appears in the display. Then press SEL
to increase (A ) or decrease (Vv ) the volume setting. The level will
appear in the display.
Setting the clock: Press MENU until SELECT HOUR or SELECT
MINUTE is displayed. Use SEL to manually increase A ) or decrease
À ) the hours/minutes. Press MENU again to disengage clock mode.
35
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
10. REPEAT: Press to repeat the CE)
current CD/MP3 track. ==
11. SHUFFLE: Press play the
CD/MP3 tracks on the current disc
in random order.
12. FOLDER p : Press to access
the next MP3 directory.
o o
13. FOLDER : Press to access
the previous MP3 directory
14. FF(Fast forward): In CD mode,
press until desired selection is
e
reached.
15. REW(Rewind): In CD mode,
press until desired selection is
reached.
16. SAT (if equipped): Your radio Sie
comes equipped with Satellite Ready
capability. The kit to enable the
Satellite reception is available through your dealer. Detailed satellite
instructions are included with the dealer installed kit. Dealer installed
satellite kit only available in the continental United States.
17. BAND: Press to toggle between
AM/FM1/FM2 frequency band.
18. Memory presets: To set a (Gp) MAON Ea
station: Select frequency band
AM/FM; tune to a station, press and
hold a preset button until sound returns.
19. Power/volume: Press to turn =
ON/OFF; turn to increase or K_a
decrease volume levels. O
36
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
20. Load: Press to load a CD. Press
and hold to load up to six discs.
21. CD: Press to enter CD mode.
CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ballpoint pens may damage CDs. Please contact your
dealer for further information.
22. Scan: Press SCAN to hear a
brief sampling of radio stations or
CD/MP3 tracks. Press again to stop.
23. Disc/Tune: Press <q or > to
manually tune down/up the radio frequency band, or to listen to the
previous/next CD.
CAT: CAT is only available when equipped with Satellite Radio. Your
Audiophile radio comes equipped with Satellite ready capability. The kit
to enable Satellite reception is available through your dealer. Detailed
Satellite instructions are included with the dealer installed kit. Dealer
installed satellite kit only available in the continental United States.
For information regarding SIRIUS Satellite Radio, please call toll-free
888-539-SIRIUS (888-539-7474) or visit the SIRIUS website at
www.siriusradio.com
37
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
REAR SEAT RADIO CONTROLS (IF EQUIPPED)
If your vehicle is equipped with a
front row console, then it is also - VOLUME + MODE
equipped with rear seat radio C C3
controls.
~q SEEK > MEMORY
Cacad
LJOK6 %©6
If your vehicle is equipped with the
Vehicle Navigation Radio, then it =
may also be equipped with rear seat
radio controls. [=r]
Ono
This feature allows front and middle seat passengers to listen to different
media sources (radio, cassette, CD or DVD) simultaneously. (However,
the front and middle-seat passengers cannot listen to two different radio
stations at the same time.)
When the rear seat controls are activated, rear seat passengers can use
the controls to change the playing media for all passengers (Single Play
mode). In this mode, all speakers will play audio from the same media
source for all passengers to hear. To activate the rear seat radio controls:
e Press the memory preset controls =
3 and 5 at the same time. A IWIOvI : ICD
headphone icon A will illuminate
in the radio display, indicating the rear seat radio controls are active.
e Press memory preset controls 3 and 5 a second time to deactivate the
rear seat controls. The headphone icon A will turn off in the radio
display.
If there is a discrepancy between the rear seat controls and the front
audio controls (such as both trying to listen to the same playing media),
the front audio system will receive the desired selection.
38
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
To activate Dual Play mode (rear
seat passengers listen to a different - VOLUME + MODE
playing media than the front seat C C3
passengers):
e Press the speaker/headphone
control. Cl) C)
Press the MODE control to
-> Oo ^0
change audio sources (for
headphone mode only)
Use the SEEK, VOLUME and
MEMORY/MEM controls to make adjustments to the playing media.
Dual Play mode may also be
activated by pressing memory OJ (ED) (ED) (ED) C) C
presets 2 and 4 simultaneously on
the front audio controls.
<q SEEK > MEMORY
The rear speakers mute and rear seat passengers have audio (for their
selected media) available through their headphones.
To adjust the volume
The volume control allows the rear seat passengers to adjust the volume
level of the audio system.
Press the + control to increase
volume.
E A
- VOLUME + MODE
D
<q SEEK B® MEMORY
C J)
DUOLRMO)
Press the - control to decrease
volume.
From the rear seat controls, volume control can be set no higher than
the current radio setting unless the speakers are turned off.
39
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Turning the rear speakers on and off
Press the headphone/speaker
control to turn the rear speakers on - VOLUME + MODE
(Single Play mode) or off (Dual Play C C3
mode).
~a SEEK > MEMORY
eee i es,
— POMS H0
Using headphones/Dual Play mode
Plug a 3.5 mm headphone (not included) into the A jack. Press the
speaker on/off control to operate the headphones. DUAL PLAY
illuminates in the radio display and the fade control is disabled, signaling
that Dual Play has been activated.
The rear speakers will cut out once the speaker on/off control is pressed.
The front speaker will remain playing for the front passengers. Press the
control again to deactivate the headphones. SINGLE PLAY illuminates in
the radio display and the fade control is enabled, signaling that Dual Play
mode has been deactivated.
To enable Dual Play, the rear seat controls must be active
and A illuminated in the radio display.
Mode select
Push the MODE control to toggle
between AM, FM1, FM2, tape Cf - VOLUME + MODE
equipped), CD, CD changer (if Ee
equipped) or DVD (if equipped). If -E =<
in Dual Play mode, SHARED <a SEEK B® MEMORY
illuminates in the radio display when C.J C3
the front and rear modes are set to
40
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Memory preset control
Push the MEMORY/MEM control
successively to allow rear seat - VOLUME + MODE
passengers to scroll through the 6 C C3
memory presets in AM, FM1 or
FM2. <q SEEK mB MEMORY
Push the MEMORY/MEM control in C.D) a-
CD mode (if equipped) to advance
to the next disc. g aKO OO
Seek function
e In radio mode, press <Q to find
the next listenable station down - VOLUME + MODE
the frequency band. CD) C4
e In radio mode, press B> to find “<4 SEEK B MEMORY
the next listenable station up the
frequency band. ~ Co)
e In tape mode (if equipped), use Di o
the SEEK function to access the O 1© ©
next a or previous <q
selection.
e In CD mode (if equipped), use the SEEK function to access the
next > or previous <q selection.
Parental control
Press the memory preset controls 3
and 5 simultaneously on the front (ED) o) o) o) (C) Ce)
audio controls to disable the rear
seat controls. They will remain disabled until the front seat passengers
“enable” them again by simultaneously pressing the 3 and 5 preset
controls. The settings of the front seat controls will always override
those of the rear seat controls.
41
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
RADIO FREQUENCIES
AM and FM frequencies are established by the Federal Communications
Commission (FCC) and the Canadian Radio and Telecommunications
Commission (CRTC). Those frequencies are:
AM - 530, 540-1700, 1710 kHz
FM- 87.7, 87.9-107.7, 107.9 MHz
RADIO RECEPTION FACTORS
There are three factors that can affect radio reception:
e Distance/strength: The further you travel from an FM station, the
weaker the signal and the weaker the reception.
Terrain: Hills, mountains, tall buildings, power lines, electric fences,
traffic lights and thunderstorms can interfere with your reception.
Station overload: When you pass a broadcast tower, a stronger signal
may overtake a weaker one and play while the weak station frequency
is displayed.
CASSETTE/PLAYER CARE
Do:
e Use only cassettes that are 90 minutes long or less.
e Tighten very loose tapes by inserting a finger or pencil into the hole
and turning the hub.
e Remove loose labels before inserting tapes.
e Allow tapes which have been subjected to extreme heat, humidity or
cold to reach a moderate temperature before playing.
e Clean the cassette player head with a cassette cleaning cartridge after
10-12 hours of play to maintain good sound/operation.
Dont:
e Expose tapes to direct sunlight, extreme humidity, heat or cold.
e Leave tapes in the cassette player for a long time when not being
played.
CD/CD PLAYER CARE
Do:
e Handle discs by their edges only. Never touch the playing surface.
e Inspect discs before playing. Clean only with an approved CD cleaner
and wipe from the center out.
42
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Don't:
e Expose discs to direct sunlight or heat sources for extended periods
of time.
e Insert more than one disc into each slot of the CD changer magazine.
e Clean using a circular motion.
CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ballpoint pens may damage CDs. Please contact your
dealer for further information.
AUDIO SYSTEM WARRANTY AND SERVICE
Refer to the Warranty Guide for audio system warranty information. If
service is necessary, see your dealer or qualified technician.
Whenever a warning is received, the radio volume will be lowered
to a volume that will allow the tones to be heard. The radio
volume will return to the previous level after the warning goes
away.
REAR SEAT ENTERTAINMENT DVD SYSTEM (IF EQUIPPED)
Your vehicle may be equipped with a Rear Seat Entertainment DVD
System which allows you to watch DVDs, DVDR/RW, play music CDs,
CDR/RW, MP3s and to plug in and play video game systems. Please
review this material to become familiar with the system features and
safety information.
43
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
DVD player controls
1. MAIN control
NEXT — Press to access the next track on the CD, the next chapter
on the DVD, or to go up in cursor mode.
e PREV — Press to access the previous track on the CD, the previous
chapter on the DVD, or to go down in cursor mode.
e REV — Press to reverse in CD and DVD play modes or to move the
cursor left in the menu active mode.
e FWD —Press to advance in CD and DVD play modes or to move the
cursor right in the menu active mode.
2. PLAY/PAUSE control
Press to playback or pause the DVD.
3. DIM control
Adjust to increase (+) or decrease (-) the amount of brightness on the
screen.
4. ENTER control
Press to select the function pointed to within the active menu. May also
be used by some user interactive discs during movie play.
5. MENU control
Press to bring up the disc menu.
6. AUX control
Press to switch DVD player from play mode to auxiliary mode.
44
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
7. Auxiliary jacks
Insert lines for standard video game players.
8. STOP/EJECT control
Press once to stop DVD play. Press again to eject the DVD.
9. DISPLAY (DISP) control
Press to enable on screen display of player menu and user display
adjustments.
DVD control features
Menu control
Press the MENU control to enter
into MENU mode. This allows you to
move and choose within the DVD
generated menu structure. Once in
MENU mode:
e Press the NEXT control to move
the cursor one position upward
e Press the PREV control to move
the cursor one position downward
e Press the REV control to move
the cursor left one position
45
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e Press the FWD control to move
the cursor right one position
Next/Previous control
The NEXT (up) and PREV (down)
controls allow you to access the
next or previous track on a CD or
chapter on a DVD. When pressed,
the playing audio will mute
momentarily while the next chapter
is accessed. Press and hold to advance or reverse multiple tracks or
chapters.
REV/FWD control
Press the REV/FWD control during
playback mode to reverse or
advance at a normal speed. Press
the REV/FWD control again to
disengage the reverse/advance
action and return to normal
playback mode
Enter control
The ENTER control allows you to [_enrer |
select items when in MENU mode.
Press the ENTER control to select
the desired highlighted item.
CD play mode
Press NEXT during CD play to
advance to the next track. If you
press NEXT during the last track,
the system will wrap around to the
first track and begin play.
Slow play mode
To enter slow play mode, press the [>/I |
PLAY/PAUSE control. Once the
system is in pause mode, press the
46
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
FWD or REV control for slow motion playback. Three different speeds
are available depending on how long the control is held. Press the
control once for slow motion playback. Press the control again to
disengage slow motion playback. Press the PLAY/PAUSE control to
return to normal playback mode.
User menu mode
To adjust the display setting, press
DISP once and the current display [_ os )
setting will appear on the screen
along with the current media status. Pressing DISP again will toggle the
display setting through the next available display settings. (Available
screen selections are 4x3, ZOOM, and 16x9.) The setting will disappear
after approximately three seconds, but the title bar and audio setting will
remain on the screen until DISP is pressed again.
The DVD player will read the disc type and configure the display
accordingly. Some movies have a wide screen movie format to fit a
normal 4x3 screen. In this case, the movie will have black bars on the
top and bottom or left and right of the image on the screen. When
shown on the screen, it may appear as a small screen within the wide
screen. It may be desirable to view this type of movie in ZOOM mode. To
enter ZOOM mode, press DISP once for the current display setting and
press DISP again within three seconds to change the display setting to
the desired display setting.
47
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Do
REV(<<) &) ©) GF
mee E:
1. REWIND control
Press to reverse the direction of the DVD movie.
2. FAST FORWARD control
Press to advance the direction of the DVD movie.
3. PLAY/STOP control
Press to play or stop the DVD movie.
4. SEEK control
Press to reverse or advance the chapter of the DVD or the track of the
CD.
5. DISPLAY (DISP) control
Press to enable on screen display of player menu and user display
adjustments. Once the display is on, use SEEK to choose the desired
screen setting.
6. ENTER (ENT) MEMORY control
In DVD playback mode, press the control to select a designated item in
menu mode.
Remote control
In stop mode, press the control to select the next radio memory preset.
7. MNU/MODE control
In DVD playback mode, press to access the disc menu.
48
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
CD.
8. VOLUME control
Press to increase (+) or decrease (-) volume level.
In stop mode, press to change to a different playing media (e.g. AM, FM,
sa)
Battery replacement
Batteries are supplied with the
remote control unit. Since all L
batteries have a limited shelf life,
replace them when the unit fails to
control the DVD player. There is a
LED indicator light on the remote
control that will illuminate when any
control is pressed.
Slide the battery cover off as shown on the remote control to access the
batteries.
The remote control unit uses two AAA batteries.
Parental control
To enable or disable your Rear Seat
Entertainment DVD System, CO C) O C) C o
simultaneously press the memory
preset controls 3 and 5 on the radio face.
For further information about the Rear Seat Controls, refer to Rear Seat
Controls section in this chapter.
Wireless headphones
Your system is equipped with 2 sets
of wireless headphones. (Two AAA
batteries are needed to operate the
headphones.) Batteries are included.
49
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
To install the batteries, lightly press
down on the top of the left earpiece
and slide the cover off.
When replacing the batteries, use
two new batteries (alkaline
recommended) and install them
with the correct (+) and (-)
orientation.
Note: Additional 1.9-2.3mhz infrared wireless headphones may be
purchased by contacting your local dealer or retailer.
Wireless headphone operation
To operate the headphones:
e Press the ON/OFF button on the
left-hand earpiece. The LED light
on the right-hand earpiece will
illuminate. Press again to turn off.
Adjust the headphones to
comfortably fit your head.
Adjust the volume control to a
comfortable listening level.
Note: The volume level of the wireless headphones can only be
controlled by the thumbwheel. Neither the remote control nor the rear
seat controls will affect the volume output of the wireless headphones.
When not using the headphones,
shut them off to preserve battery
power. The headphones will
automatically turn off after five
minutes if they have not received an
infrared audio signal from the
overhead pod.
Ensure that the line of sight
between the headphone and
infrared transmitter Gnounted on
the DVD housing) is not obstructed.
50
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Liquid Crystal Display (LCD) flip-down screen
The screen rotates down to view and into the housing to store when not
in use. Be sure the screen is latched into the housing when being stored.
555
0 105 EA
\a EBs] =)
Ə
1. 7.0” (diagonal) active matrix liquid crystal display (LCD) screen.
2. Screen housing.
3. Dimmer switch. Press +/- to increase/decrease the brightness of the
screen.
Playback and format
e The DVD player of your Rear Seat Entertainment DVD System can
only be used in the “playback” mode. (The DVD player does not offer
a record feature.)
e The system plays standard CDs or DVDs.
e The DVD player is capable of playback of DVDs, DVDR/RW, CDs,
CDR/RW and MP3s.
Rear Seat Entertainment DVD System protection circuits
High temperature sensor circuit
e Excessively high temperatures may cause damage to the DVD player.
51
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e When the temperature of the DVD player becomes too hot, the high
temperature sensor circuit stops machine operation. DVD/CD HOT will
illuminate in the radio display.
The DVD player will remain inactive until it cools to a normal
operating temperature. Length of time to cool will vary depending on
conditions.
General operating tips
e When the engine is not running, use the system sparingly. Otherwise,
it will run the battery down.
e When the ignition is turned to OFF, the Rear Seat Entertainment DVD
System is also turned OFF. When the ignition is turned ON, the
system will begin playback from the last selected media source when
the play control is pressed.
To disable the DVD player, simultaneously press the 3 and 5 memory
presets on the radio face. To enable the DVD player again, press the 3
and 5 presets simultaneously.
The DVD player is only capable of reading the bottom side of a disc.
When inserting a single sided disc, the label should be up. For a
multi-sided disc, the desired play side should be down when the disc
is inserted into the player.
The DVD player is capable of playback of DVDs, DVDR/RW, CDs,
CDR/RW and MP3s.
e DVDs are formatted by regions. This DVD system can only play region
1 DVDs (DVDs manufactured for U.S. and Canada).
This unit is designed to play commercially pressed 4.75 in (12
cm) audio compact discs and DVDs only. Due to technical
incompatibility, certain recordable and re-recordable compact
discs may not function correctly when used in Ford DVD/CD
players. Irregular shaped discs, discs with a scratch protection
film attached, and discs with homemade paper (adhesive) labels
should not be inserted into the player. The label may peel and
cause the disc to become jammed. It is recommended that
homemade discs be identified with permanent felt tip marker
rather than adhesive labels. Ballpoint pens may damage discs.
Please contact your dealer for further information.
Inserting a CD/DVD
Partially insert the CD/DVD into the slot and the system will fully pull in
the disc. Inserting the disc too far could cause the disc to jam in the
system.
52
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Inserting a CD/DVD into the DVD player automatically turns the power
ON and playback should begin.
The counter is automatically reset to 0:00:00.
Removing a CD/DVD
1. Press the STOP/EJECT control to stop playback.
2. Press the STOP/EJECT control again to eject the CD/DVD.
If the CD/DVD is not removed within the allotted time, the system will
pull the CD/DVD back into the system for safety purposes. If the
CD/DVD will not eject from the system, press and hold the EJECT
control for approximately 2 seconds. The disc should eject whether the
vehicle ignition is ON or OFF.
Playing a video game/auxiliary device
1. Connect the video line from your video game device to the YELLOW
auxiliary input jack.
2. Connect the left and right audio lines to the WHITE and RED auxiliary
input jacks respectively.
3. Press the MODE control until DVD/CD AUX (no disc in player) or
DVD/CD play (disc in player) illuminates in the radio display. If a disc is
in the system, playback should begin. To enable the aux inputs, press the
STOP control or press the AUX control on the DVD player.
On-screen indicators
[2 Cot En OFF KD TEDAC =3
5 ©
Each time a control is pressed, the operational status of the DVD player
is shown on the screen. The following are some possible indicators:
53
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
1. CD track
2. DVD chapter
3. SYSTEM COUNTER — displays current viewing time of desired media.
(HOURS:MINUTES:SECONDS)
4. DVD/ CD STATUS (PLAY/FF/REW/PAUSE)
5. AUDIO OUTPUT (not changeable)
6. Subtitles (specific language type - English, Spanish or French,
dependent on disc capability and ON/OFF selection.)
7. Camera angle (of picture) - Adjustable with cursor controls and
ENTER control.
Safety information
Read all of the safety and operating instructions before operating the
system and retain for future reference.
Do not attempt to service, repair or modify the Rear Seat Entertainment
DVD System. See your Ford or Lincoln Mercury dealer.
Do not insert foreign objects into the DVD compartment.
The front glass on the liquid crystal display (LCD) flip-down
screen may break when hit with a hard surface. If the glass
breaks, do not touch the liquid crystalline material. In case of contact
with skin, wash immediately with soap and water.
Do not expose the liquid crystal display (LCD) flip-down screen
to direct sunlight or intensive ultraviolet rays for extensive
periods of time. Ultraviolet rays deteriorate the liquid crystal.
Be sure to review user manuals for video games and video game
equipment when used as auxiliary inputs for your Rear Seat
Entertainment DVD System.
Do not operate video games or video equipment if the power cords
and/or cables are broken, split or damaged. Carefully place cords and/or
cables where they will not be stepped on or interfere with the operation
of seats and/or compartments.
Disconnect video games and video equipment power cords and/or cables
when not in use.
Avoid touching auxiliary input jacks with your fingers. Do not blow on
them or allow them to get wet or dirty.
Do not clean any part of the DVD player with benzene, paint thinner or
any other solvent.
54
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Whenever a warning is received, the radio volume will be lowered
to a volume that will allow the tones to be heard. The radio
volume will return to the previous level after the warning goes
away.
Federal Communication Commission (FCC) Compliance
Changes or modifications not approved by Ford Motor Company could
void user’s authority to operate the equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference with radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to consult the dealer or an
experienced radio/TV technician for help.
Care and service of the DVD player
Environmental extremes
DVD players that are subjected to harsh environmental conditions may
be damaged or perform at less than maximum capability. To avoid these
outcomes, whenever possible avoid exposing your DVD player to:
e extremely hot or cold temperatures.
direct sunlight.
high humidity.
a dusty environment.
locations where strong magnetic fields are generated.
Temperature extremes
When the vehicle is parked under direct sunlight or in an extremely cold
place for a long period of time, wait until the cabin temperature of the
vehicle is at normal temperature before operating the system.
Humidity and moisture condensation
Moisture in the air will condense in the DVD player under extremely
humid conditions or when moving from a cold place to a warm one. If
55
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
moisture condensation occurs, do not insert a CD or DVD into the
player. If one is already in the player, remove it. Turn the DVD player ON
to dry the moisture before inserting a DVD. This could take an hour or
more.
Cleaning the liquid crystal display (LCD) flip-down screen
Clean the display screen by applying a small amount of water or any
ammonia-based household glass cleaner directly to a soft cloth. Rub the
screen gently until the dust, dirt or fingerprints are removed. Do not
spray the screen directly with water or glass cleaning solvents. Overspray
from these fluids could drip down into the internal electronics of the
screen and cause damage. Do not apply excessive pressure while
cleaning the screen.
Foreign substances
Exercise care to prevent dirt and foreign objects from entering the DVD
player compartment. If liquid is accidentally spilled onto the system,
immediately turn the system OFF and consult a qualified service
technician.
Cleaning CDs and DVDs
Inspect all discs for contamination before playing. If necessary, clean
discs only with an approved CD cleaner and wipe from the center out to
the edge. Do not use circular motion.
Cleaning the DVD player exterior
Clean the exterior of the DVD player with a damp cloth. Do not use CD
cleaning kits or CDs intended to clean the interior of your DVD player.
Use of these products may damage your system.
VEHICLE NAVIGATION RADIO (VNR IF EQUIPPED)
Your vehicle may be equipped with a Vehicle Navigation Radio (VNR)
which allows you to listen to the radio, play CDs and also navigate the
vehicle using navigation CDs.
Your Vehicle Navigation Radio is equipped with many different features
and controls. The labeled controls on the front face of the system (which
are called out below) are known as hard keys. The five blank controls
located under the MENU control are called soft keys. These controls are
labeled on the screen and can change functionality depending on which
screen is activated in the display. The hard keys will be explained further
below and the soft keys will be described as needed.
56
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Safety information
Please read and follow all stated safety precautions. Failure to do
so may increase your risk of collision and personal injury.
Ford Motor Company shall not be liable for any damages of any
type arising from failure to follow these guidelines.
Do not attempt to service, repair or modify the system. See your Ford or
Lincoln Mercury dealer.
The driver must not attempt to operate any detailed operation of
the navigation system while the vehicle is in motion. Give full
attention to driving and to the road. Pull off the road and park in a
safe place before performing detailed operations.
A safety screen will be displayed PLEASE DRIVE SAFELY
each time the navigation system is | PLEASE DRIVE SAFELY |
turned on as a reminder. Ensure 4 Language / Langue
that you are familiar with the
system’s features and functionality,
including the following:
This unit gives guidance only.
Some map data may be incorrect.
Safe and lawful vehicle use is
the driver's responsibility.
e Do not turn the ignition key or start the engine while the software is
updating.
e Do not apply pressure to the display screen.
e The navigation system is not a substitute for your personal judgement.
e Route suggestions should not supersede local traffic regulations or
safe driving practices.
e Do not follow route suggestions if they direct you to perform an
unsafe or illegal maneuver, would place you in an unsafe situation, or
would route you into an area that you consider unsafe.
e Drivers should not rely on screen displays while their vehicle is in
motion. Let the voice guide you. If viewing is necessary, pull off the
road to a safe location.
e Do not use the navigation system to locate emergency services.
57
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e For road safety reasons, the driver should program the system only
when the vehicle is stationary. Certain functions will therefore not
operate while the vehicle is in motion.
e The navigation CD does not reflect road detours, closures or
construction, road characteristics such as rough road surface, slope or
grade, weight or height restrictions, traffic congestion, weather or
similar conditions.
e To use the system as effectively and safely as possible, obtain
up-to-date navigation CD’s whenever they become available.
e Set the volume level so that you can hear directions clearly.
e Do not disassemble or modify the system as this may lead to damage
and void your warranty. If a problem occurs, stop using the system
immediately and contact your Ford or Lincoln Mercury dealer.
System overview
1. HOME: When the home location
is empty, pressing and holding this
key will store the vehicle’s current
58
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
location as home. Pressing the home key after the home location has
been set will calculate a route to that set home location.
2. Eject: Press this control to eject
an audio CD or a navigation CD. [ a | ——
3. Navigation (NAV): Press the
NAV control to access the navigation | nav je -—
system menu.
4. Cursor control: Use this control
when viewing a menu in the
navigation system. Press the control
up or down, left or right to highlight
an item in the display. Press the
center of the control to make your
selection.
5. BACK: Use this control in the
navigation system. Press to return
to the previous screen or you can
press MENU to return to the main
navigation menu.
6. MAP: The MAP control works in
all modes. Press to show current | map je To
location.
7. Memory presets: The memory
presets store favorite AM/FM [| [3s 4] [ae]
stations and allow you to access
various discs when in CD DJ mode.
Press and hold a preset control until
PRESET SAVED appears in the display.
8. SEEK: Use this control to find the next listenable radio station or
advancing tracks in CD mode.
9. Headphone/speaker: Press the
control to enable Rear Seat Control -_— >| 0/4 |
(RSC) mode. The
headphone/speaker or headphone
icon will appear in the display. Press the control again to disable RSC
control mode (the icon will appear with a red slash through it).
59
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
When in RSC mode, Dual Play mode can be enabled and disabled by the
RSC, or by pressing Preset 2 and 4 simultaneously on the Navigation
radio system. The system is in Dual Play mode if both the Headphone
and Speaker icons are present, and in just RSC mode if only the
Headphone icon is present.
10. AM/FM: Press to listen to the
AM or FM frequency band (AM, - >| awm |
FM1, FM2). Pressing AM/FM in
Navigation mode will return you to
the audio screen.
11. On/volume: Press the ON
control to turn on the VNR system. ON
Press again to turn the system off. +O)
Turn the control to adjust the audio -
volume levels. To adjust the voice PUSH
output levels from the navigation ON
system, adjust the volume levels
only during voice output.
12. Phone (if equipped): If the
phone button is pressed, the display - > e |
will read NO PHONE. This button is
non-functional (the radio will not
mute). Cellular connectivity is not currently available for this radio.
13. CD: Press to enter CD mode or
to begin play of a CD that is already _— > co |
loaded in the system. Press the CD
control again to toggle CD, CD DJ
and DVD Cif equipped).
NOTE: Navigation CD’s are not operational in the CD DJ.
NOTE: To use the navigation system and listen to an audio CD, the
navigation CD must be loaded into the VNR and the audio CD must be
loaded into the CD DJ.
60
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
14. MENU: The MENU control
works in both the audio and
navigation mode. Press to access aaa
various menus in both modes.
15. HERE: The HERE control works
in the navigation mode. Press the
control to identify the current = >[ en |
location of the vehicle.
Quick start — how to get going
To play a radio station:
1. Ensure that the ignition and the Vehicle Navigation Radio (VNR)
system are ON.
2. Press the AM/FM control to select
the desired frequency band. -_-— >| awm |
3. Press the SEEK control to locate
To play a CD in the VNR:
1. Ensure that the ignition and the
VNR system are ON. — — >L c=]
2. Insert a CD into the single slot of
the VNR and the CD will automatically begin play. If a CD is already
loaded into the system, press the CD control.
To play a CD in the CD DJ:
1. Ensure that the ignition and the
VNR system are ON. — >| = |
2. Insert CD(s) into the CD DJ
magazine. Insert magazine into CD DJ. If the CD DJ magazine is already
loaded, press the CD control to toggle through CD, CD DJ and DVD (if
equipped).
61
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
3. Press the memory presets to
choose the desired disc in the CD (ees E a
DJ.
Note: Navigation CD’s are not operational in the CD DJ.
To use the Navigation system:
1. Ensure that the ignition and the VNR system are ON, and a map data
disc is inserted into the VNR CD slot.
Note: To use the navigation system and listen to an audio CD, the
navigation CD must be loaded into the VNR and the audio CD must be
loaded into the CD DJ.
2. Press the NAV control to enter
into Navigation mode. | nav je ==
3. To enter a destination, ensure
that the vehicle is in the PARK position.
4. To navigate to home from the
current location, press HOME. If a
home location has not previously
been stored, pressing and holding
HOME will store the home location.
Audio features
Your Vehicle Navigation Radio has many features including a full range of
audio functions.
Audio screen display
When in audio mode, there are various indicators which will appear on
the display.
1. Station name
2. Station frequency
3. Stereo indicator
4. Preset selected
5. Band selected
If the navigation system is activated during radio or CD playback (CD
DJ), audio output continues but route guidance screens will appear in
the display.
62
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Volume/power control
Press the control to turn the
audio/navigation system on or off.
Turn the control to raise or lower volume. The levels will be displayed on
the screen.
To adjust the navigation voice output level, adjust the volume control
only when the navigation system is speaking. Otherwise, it will adjust the
radio levels.
Automatic volume control (AVC)
With this feature, radio volume changes automatically with vehicle speed
to compensate for road and wind noise. To engage the AVC feature:
1. Press the MENU control.
2. Select AUDIO OPTIONS.
3. Select AVC, TRAFFIC, DSP.
4. Select AVC.
4@More ... AVC, Traffic, DSP
63
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
5. Use the cursor control to increase
or decrease the levels. The higher
the level selected, the greater the
compensation. The levels will be
shown in the display. Decrease all
the way to the left to turn AVC off.
AM/FM select
The AM/FM control works in radio,
CD and navigation modes. == >| awen |
AM/FM select in radio mode
This control allows you to select AM or FM frequency bands. Press the
control to switch between AM, FM1 or FM2 memory preset stations.
AM/FM select in CD mode
Press to stop CD play and begin radio play.
Radio reception factors:
e Distance/strength. The further an FM signal travels, the weaker it is.
The listenable range of the average FM station is approximately 40 km
(24 miles). This range can be affected by “signal modulation.” Signal
modulation is a process radio stations use to increase their
strength/volume relative to other stations.
Terrain. Hills, mountains and tall buildings between your vehicle’s
antenna and the radio station signal can cause FM reception problems.
Static can be caused on AM stations by power lines, electric fences,
traffic lights and thunderstorms. Moving away from an interfering
structure (out of its “shadow”) returns your reception to normal.
e Station overload. Weak signals are sometimes captured by stronger
signals when you pass a broadcast tower. A stronger signal may
temporarily overtake a weaker signal and play while the weak station
frequency is displayed.
AM/FM select in navigation mode
Press once when in navigation mode to return to the audio screen (while
the navigation function continues to work in the background). Press
again to enter AM/FM mode where you are able to make frequency band
adjustments.
64
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
CD select
To begin CD play (if a CD is already
loaded), press the CD control. The
first track of the disc will begin
playing. After that, CD play will
begin where it stopped last. Press the CD control again to toggle
between CD, CD DJ, DVD/Video (or DVD/Aux Mode), if equipped with
DVD Rear seat entertainment system.
If a navigation CD is in the head unit and you press CD, the system will
automatically search for an audio CD in the CD DJ and begin play if it is
present.
Adjusting the levels
1. Press the MENU control.
2. Select the AUDIO OPTIONS soft
key.
3. Select BASS, TREB, BAL or
FADE.
The bass adjust allows you to
increase or decrease the audio
system’s bass output. —}——_
The treble adjust control allows you
to raise or lower the audio system’s
treble output.
Speaker sound can be adjusted between the front and rear speakers
using the fade feature.
The balance feature allows sound distribution to be adjusted between the
right and left speakers.
65
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
4. Use the cursor control to increase
or lower the bass and treble levels
or to adjust the sound between the
front and rear or between the left
and right speakers.
DSP (Digital Signal Processing)
The Digital Signal Processing (DSP) feature allows you to change the
signal mode to suit your listening tastes.
Press the soft key to turn the feature on or off.
This feature can be accessed by selecting the menu option “More...
AVC, Traffic, DSP..” within the “Audio Options” menu.
You can then select from the DSP Effects
following signal modes:
e NEWS — ’voice-only” type of
sound with a limited audio band
JAZZ CLUB — jazz club with
clearly reflected sounds
Off - No DSP Effect
Jazz Club
e HALL — rectangular concert hall
capacity of about 2,000
e CHURCH — church with a high vault
e STADIUM — outdoor stadium with a capacity of about 30,000
This system has three “occupancy modes” of listening:
e Driver — Optimizes audio playback for the drivers seat position.
e All — Optimizes audio playback to be similar for ALL seating
positions.
e Rear — Optimizes the audio playback for rear seat passengers.
66
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Rewind/fast forward
Press the PP and 4 controls
to fast forward or rewind a CD
track.
Seek function
The SEEK control works in all
modes.
Seek in radio mode
e Press < to find the next listenable station down the frequency band.
e Press > to find the next listenable station up the frequency band.
Seek in CD or CD DJ mode
e Press A] to seek to the previous track of the current disc. If a
selection has been playing for three seconds or more and you
press < , the CD changer will replay that selection from the
beginning.
e Press > to seek forward to the next track of the current disc. After
the last track has been completed, the first track of the current disc
will automatically replay.
Seek in navigation mode
e Press A or > to access the next audio station if in radio mode, and
next track if in CD mode.
Radio station memory preset
The radio is equipped with six station memory preset controls. These
controls can be used to select up to six preset AM stations and twelve
FM stations (six in FM1 and six in FM2).
The presets will also allow you to access CDs which are loaded in the CD
DJ. When in CD mode, simply press the preset number which
corresponds to the desired disc.
67
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Setting memory preset stations
1. Select the frequency band with the AM/FM select control.
2. Select a station. Refer to Tune adjust or Seek function for more
information on selecting a station.
3. Press and hold a memory preset
control until PRESET SAVED
appears on the display.
Autoset memory preset
Autoset allows you to set strong radio stations without losing your
original manually set preset stations. This feature is helpful on trips
when you travel between cities with different radio stations.
Starting autoset memory preset
1. Select a frequency band using the AM/FM select controls.
2. Press the AUTO control. 12:34
3. When the first six strong stations 4 SCAN WRIF
are filled, the station stored in a TUNE }
memory preset control 1 will start
playing.
If there are less than six strong
stations available on the frequency
band, the remaining memory preset
controls will all store the last strong station available.
Any preset stored via the presets directly (pressing and holding) in this
mode are temporary.
A message will indicate whenever a temporary preset is stored or
recalled. This mode is active while the AUTO soft key is highlighted.
To deactivate autoset and return to your audio system’s manually set
memory stations, press the AUTO control again.
68
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Tune adjust
The tune feature works in radio
mode.
e Select the TUNE soft key.
e Press SEEK to go up > or
down <Q the frequency band
manually.
Stereo indicator
Whenever a stereo signal is received in radio mode, the stereo indicator
(ST) will appear in the display.
Scan function
Press the soft key next to SCAN for
a brief sampling of all listenable
stations on the selected frequency.
Press again to disable scan and
remain on the current station.
Program type (PTY) selections
Some FM stations transmit program Select Program Type
type codes which can be used to
locate different stations transmitting
programs of a certain type.
Press the soft key next to TYPE to
access a list of available program
types.
Use the cursor control to select the
desired program type. The system will search for and begin playing that
program type if available. During a seek or scan and for 10 seconds after
a station is found, pressing the seek up/down or scan will initiate another
search. If the desired type cannot be found, "Not Found’ appears in the
display and the audio system returns to the original station.
Traffic information
The Traffic information soft key can be accessed under menu option
“MORE, AVC, TRAFFIC, DSP...” within the “AUDIO OPTIONS” menu.
69
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Select the TRAF soft key to select traffic information broadcast from
certain stations which will automatically interrupt radio or CD playback
at a preset volume level. The default Traffic volume can be adjusted with
the slider bar using the cursor input. Moving the position to the left most
position will turn this feature off.
The display TRAF will appear in Orange if the feature is enabled, but
there is no broadcast traffic program available.
Traffic information is not available in most U.S. markets.
Compression
The compression feature will boost 12:34
quieter music and lower louder Track 1
music to minimize the need for
volume adjustments.
When in CD or CD DJ mode, press
COMP to engage or disengage the Compression On
compression feature. A
Shuffle
When in CD or CD DJ mode, press 12:34
SHUF to engage and disengage the Track 1
shuffle feature. All tracks on the
current disc will be played in
random order.
Shuffle On
DVD functionality (if equipped)
Your vehicle may be equipped with a DVD Rear Seat Entertainment
system. Your Vehicle Navigation Radio (VNR) System allows you to have
control over the DVD player as well.
The VNR system will display DVD Video/DVD
status messages in the radio display.
The soft keys are PLAY/PAUSE,
EJECT and STOP/AUX.
70
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Press the CD control until DVD
appears in the display. eS > [co |
A (EJECT) — Press to stop DVD and eject the DVD disc.
p (PLAY) / II (PAUSE) — Press to play/pause the DVD. If in play
mode, the DVD will pause when pressed. If in pause mode, the DVD will
play when pressed.
o] (STOP) / AUX — If a DVD movie is playing, press to stop. If a movie
is not playing, press to activate AUX mode.
CD DJ
Your vehicle is equipped with a CD DJ (CD changer). It is located in the
center console.
Radio power must be turned on to play the CDs in the CD DJ. The
magazine may be stored in the glove box when not being used.
The CD magazine may be inserted or ejected with the radio power off.
ONLY use the magazine supplied with the CD DJ, other types will
damage the unit.
Keep the CD DJ door closed. Coins and foreign objects will damage the
CD player and void your audio system warranty.
The CD magazine does not have to be full (all 6 disks) for the CD DJ to
function.
CD units are designed to play commercially pressed 12 cm (4.75
in) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ballpoint pens may damage CDs. Please contact your
dealer for further information.
71
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
To access the CD DJ:
Slide the door to access the CD DJ
magazine.
Press & to eject the magazine.
1. Pull the lever to remove a CD
tray from the magazine.
2. Insert one disc into each CD tray
of the magazine (up to 6 discs).
Ensure that the label side is facing
up.
If you pull too hard on the disc
holder, the disc holder may come
completely out of the magazine. If
this happens, reinsert the disc
holder back into the magazine.
72
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
3. Insert each CD tray, with the disc
loaded, all the way into the CD
magazine.
4. Insert the CD magazine into the
CD DJ.
5. Slide the door to the left to close.
Use only compact discs containing COMPACT
this mark.
DIGITAL AUDIO
The magazine does not need to be full for the CD DJ to operate.
Radio power must be turned on to play the CDs in the CD DJ. The
magazine may be stored in the glove compartment when not being used.
The CD magazine may be inserted or ejected with the radio power off.
73
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Ensure that the disc holder is
evenly inserted and at the same (a)
level as the magazine (A). The unit
will not operate if the disc holder is
not inserted at the same level (B).
CD DJ information screen
The CD DJ screen will display 12:34
various information such as: r Track 1
e Track selected
e Elapsed time
e Selected disc
e Volume level
e On-screen selections
CD DJ playback
With a navigation CD inserted into
the audio unit, press CD for CD DJ
playback. Without a navigation CD
inserted into the audio unit, press
CD until CD DJ appears in the display.
If playback is selected and the CD DJ is empty or the magazine is
missing or incorrectly inserted, NO DISC (S) will appear in the display.
If the selected CD is missing, NO DISC is displayed and the unit selects
the next available disc. The audio unit remembers which discs are
available, so it will not select a disc that it knows is missing. Instead, NO
DISC appears in the display and the current disc remains selected.
If the selected CD is damaged or upside down, CHECK DISCS and the
disc number are displayed. The unit then selects the next available disc.
During normal operations, CDs and tracks are played sequentially in
ascending order. Playback continues at track one if the end of a disc is
reached and with CD DJ playback, disc one will follow disc six.
74
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Rewind/fast forward feature
When in CD DJ mode, press and
hold the PP or <q control to
search forward or in reverse on the
current disc.
Scan feature
When in CD DJ mode, press SCAN
for a brief sampling of all tracks on
the current CD. Press again to
disengage the feature and listen to
the selected song.
Shuffle mode
When in CD DJ mode, press SHUF
to engage and disengage the shuffle
feature. The tracks will be played in
random order. The unit will play all
the tracks on the selected disc and
then move onto the other discs and
play the tracks in random order.
Compression
Entertainment Systems
12:34
Track 1
12:34
Track 1
Shuffle On
The compression feature will boost quieter music and lower louder music
to minimize the need for volume adjustments.
When in CD DJ mode, press COMP
to engage or disengage the
compression feature.
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
12:34
Track 1
75
Entertainment Systems
Rear seat controls (RSC)
Your vehicle is equipped with rear seat controls, which allow the rear
seat passengers to operate and listen to a different playing media than
the front seat passengers. To engage the rear seat controls from the VNR
system:
e Press the headphone/speaker icon
on the VNR system. The
headphone icon illuminates in the
display indicating the system has
enabled Rear Seat Control mode. A subsequent press of this button
will disable rear seat control (headphone/speaker icon on display will
appear with a red slash through it).
When RSC is active, pressing presets 2 and 4 simultaneously on the radio
will enable Dual Play mode (or the RSC can enable Dual Play mode by
pressing the A / q button). The front speakers play the selected media
and the rear speakers mute. In this mode, the rear passengers may
adjust the volume and other levels using the rear seat control.
Additionally in Dual Play mode, the front and rear seat passengers can
listen to the same playing media. However, rear seat passengers listen to
the media over their headphones (thereby being able to adjust the
volume) and the front seat passengers listen via the front seat speakers.
Press the headphone/speaker control again to disengage the rear seat
controls (and Dual Play mode). The system returns to Single Play mode.
Front and rear speakers will play the selected media.
For further information on the rear seat controls, refer to Rear Seat
Controls section found earlier in this chapter.
Navigation features
The route guidance navigation system in your audio unit will not function
unless a navigation CD is inserted.
Ensure that you follow highway code restrictions and do not take
any risks. For example, if you are unable to make a U-turn,
continue on your journey. The navigation system will recalculate
your route to get you back to an appropriate road to your
destination.
For road safety reasons, information should only be entered
when the vehicle is stationary.
76
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Please drive safely
This screen may appear on your
VNR display. Press the soft key next | moesoe CRE Saree
to the display to select the desired 4 Language / Langue
language. Press the control next to
ACCEPT to confirm your selection.
This unit gives guidance only.
Some map data may be incorrect.
Safe and lawful vehicle use is
the driver's responsibility.
Navigation screen display
When in navigation mode, there will
be various indicators on the screen
to help you in operating your
system.
1. Direction to destination
2. Distance to final destination
3. Estimated time to destination
4. Current directional heading and
GPS signal strength (color)
5. Vehicle icon (current vehicle position)
6. ZOOM
7. PAN
8. DETOUR
9. VOICE
Principles of GPS (Global Positioning System) operation
Your Vehicle Navigation System directs you based on information derived
from satellites, road maps stored on the CD, sensors in your vehicle and
the desired destination. The system compiles all necessary information to
guide you to your selected destination. Space satellites determine the
vehicle’s current location and transmit position and time signals to your
car.
If the vehicle has been parked for a long period of time, the navigation
function may be temporarily unresponsive. The navigation system will
operate reliably again once GPS reception is available in a few minutes.
77
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Limited GPS reception
System performance may be adversely affected if GPS reception is
interrupted or interference occurs over a distance of several miles. The
following are possible causes for GPS reception being interrupted. If the
vehicle is:
e in multi-story parking garages
e in tunnels and under bridges
e in between high buildings
e by forests or tree-lined avenues
e in heavy rain showers and thunderstorms
e in valleys and in mountainous regions
The GPS signal strength may vary. The directional heading indicator at
the bottom of the screen might change color to indicate this signal
strength. The colors are as follows:
e Green — A clear GPS signal is being received.
e Yellow — The GPS signal is partially blocked.
e Red — The GPS signal is unavailable and may be temporarily blocked.
To enter navigation mode
Press NAV to access the navigation
system menu. | nav je —
Use the cursor control, or the
corresponding soft key to confirm
your selection.
If you select the wrong item, press
the BACK control to return to the
previous screen. Or, press NAV to
return to the main Destination
Entry menu and start again.
78
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Map display information
When using the navigation system,
the map display screen will appear
to guide you to your location. On
the screen, you are able to make the
following choices:
e VOICE — Press to repeat the last
voice prompt.
e DETOUR — Press to select a
detour from your current navigation route.
e PAN — Press to move the current view of the map.
e ZOOM — Press to adjust the area covered on the map display. The
map zoom levels are: 2, 1⁄2, 1, 4, and 16 miles.
Selecting a destination
Press NAV to access the destination
entry menu. | nav je =
From this menu, you may select Destination Entry
from the following options:
e Address/Intersection — Use to
select a destination based on a
known street address or
intersection. Not available
when the vehicle is moving.
e Point of Interest — Use to select
a destination that is a point of interest location (i.e., airport,
restaurant, hospital). Not available when the vehicle is moving.
e Previous Destination — Use to select a destination from the last 50
destinations entered.
e Address Book — Use to select a destination from previously stored
entries.
79
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Address/Intersection
Use the soft keys to select Destination Entry
Address/Intersection from the
Destination Entry menu. The next
two options available are:
e Town/City Name - Select this
option if you know the town or
city name.
<4 Address/Intersection
P Address Book
e Street Name — Select if you
know the street address but are uncertain of the city.
The next two options are:
e Address range — Select the numerical address of the destination.
e Intersection — Select the intersection closest to the destination.
Points of Interest (POI)
This destination option enables you Destination Entry
to specify a particular place, such as
an airport or gas station. Use the
soft keys to select Points of Interest. a,
In the next menu, you will have the
following options:
e By Category — Lists POIs by Select POI
categories, such as airports, gas
stations, etc. Use the cursor
control to select and confirm pe
<4 Point of Interest
e By Name - A keyboard display
enables you to spell out the first
four letters of the desired POI. A
slight time delay will occur if large numbers of letter options are
available.
e By Category & Name - Lists categories, then allows you to spell out
the first four letters of your destination.
After making these selections, three further options are displayed:
e Show All — Lists entries in alphabetical order.
e Sort by Distance — Lists the closest POI entries to the vehicle’s
current location.
80
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e Within a Town/City — Lists entries for a specific city in alphabetical
order.
Certain categories may not be available in some areas and POIs may not
all be listed. Up to date information also depends upon using the latest
navigation CD available.
Previous destination
The last 50 destinations entered into Destination Entry
the navigation system are
automatically stored in the system’s
memory.
Use the soft key to select Previous
Destination. The address of each
stored destination will appear.
4 Previous Destination
4 Address Book
The previous origin information is
also stored in this location. This stores the location where the vehicle
last started off from and is updated each time the vehicle completes a
journey.
Deleting a previous destination
e Use the cursor control to select Destination Entry
the destination to be deleted.
e Press DELETE. ; ;
A confirmation screen will appear
before the deletion is complete. 4 Previous Destination
4
Address Book
Entering a destination using the keyboard of lists
After selecting the desired choice Set Vehicle Position Using...
from the Destination Entry menu, ‘Addresa/intersettion
there are two main ways to enter -
your destination in the VNR system:
Keyboard — the keyboard display
enables you to spell out a town, city,
street or point of interest.
e Use the cursor control to
highlight the desired character(s).
e Push in the control to confirm the selection. A highlight bar will
automatically begin searching the current files for the listing.
81
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e To move back to previously selected characters, press DELETE.
List — Your VNR system shows a list of town/cities, streets or points of
interest and a highlight bar indicates the line selected. You may choose
any of these for a destination.
e Press LIST to enter list mode.
e Use the cursor control to scroll through the selections.
e Press in the cursor control to confirm the selection.
Selecting Route Criteria
Once you have selected a Select Route Criteria
destination, select from the
following route criteria:
4 Shortest Time Route
oid Toll Roads
Freeways
id Use Freeways
1. Shortest time route — Creates a driving route which minimizes
driving time taking into consideration things such as speed limits,
number of turns, etc.
2. Shortest distance — Creates a driving route the shortest distance
from the current location.
3. Avoid toll roads — Creates a driving route which avoids toll roads
where possible.
4. Avoid freeways — Creates a driving route which avoids major
freeways where possible.
5. Use freeways — Creates a route which uses freeways where possible.
Route calculation
Once the route criteria is selected, the navigation system automatically
calculates a route to the selected destination. The route appears on the
display screen and a voice prompt provides instructions.
82
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
This screen will appear for a few
seconds while the navigation system Calculating a Route to:
is calculating your route.
Please Wait ...
Please proceed
Once the route is calculated, ‘Please Please Proceed
Proceed’ is displayed with a map on
the display. Also included in the
display:
the planned route is shown in
pink
parts of the planned route
containing incomplete map data
are highlighted in “cautionary” yellow
major roadways are shown in blue
other streets are shown in white
your vehicle location is shown as a pink/yellow triangle
the arrow at the foot of the screen points to your destination
You are able to choose from three viewing options in this display:
PLAN — Press this soft key to scroll through your entire route. This
option is only available prior to beginning the journey.
PAN — Press this soft key, then use the cursor control to pan up,
down, left or right on the map. This option is only available when the
vehicle is not in motion.
ZOOM — Press this soft key multiple times (or use the cursor input)
to select the desired zoom level on the map. The zoom level is shown
at the bottom of the screen.
83
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Guide display
Once your vehicle is moving along Turn on to E
the highlighted route, the Guide TELEGRAPH RD
display screen will automatically
appear. This screen shows your next
turn as voice prompts direct you on
the route. When the planned route Ahead 1.0 Miles
contains incomplete map data, the AM NE 0:08 102mi %
guide display maneuvers are
identified in “cautionary” yellow. The screens and voice prompts are
continually updated to correspond with your vehicle location. To
disengage the voice prompts, refer to Navigation preferences in the
System Options Chapter.
The voice volume level may be adjusted by turning the volume control
during a voice prompt only.
On the Guide display screen, there are two display functions which are
available if needed:
e VOICE — Press to repeat the current voice prompt.
e DETOUR — Press to select a detour. For more information on
detours, refer to Detours, interruptions and route changes in this
chapter.
e CANCEL — Press to cancel the guide display.
While in the Guide display screen, the cursor input can be used to
preview future/up coming maneuvers. This can be done by pressing
down on the cursor input to go to the ‘next’ maneuver instruction, and
pressing up to go to the ’previous’ maneuver. Pressing the NAV control at
any time will set you back to the current maneuver/turn instruction.
True view
As you approach an intersection, the mon to 12:34
Guide display screen will TELEGRAPH RD
automatically change to a close-up
view (True view) of the junction.
The close-up view will automatically
return to the Guide display screen
once a turn has been completed.
When the planned route contains incomplete map data, the close-up view
maneuvers are identified in “cautionary” yellow.
84
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Arrival
When you approach your You have arrived at
destination, the destination indicator
will appear on the map display
screen as a circular icon. When you
arrive, the name and address of
your destination will be displayed.
Navigation screen display
The address book feature allows you Destination Entry
to store up to 50 alphabetical
destinations. To store an address:
1. Once in navigation mode, select
’ Address book’.
2. Confirm the selection. PAE
Stored addresses will appear in the
display. If no entries exist, an empty address book screen is shown.
Use the cursor control to select the desired entry.
Adding, deleting or editing the address book
Note: These features are not available when the vehicle is in motion.
1. Ensure that you are in navigation Kados Book
mode.
2. Select Address book.
3. Confirm selection.
4. Press the DELETE soft key to
delete the current entry.
5. Press the ADD soft key to add an
additional entry.
85
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
6. Press the EDIT soft key to edit Edit Address Book
the current entry. ABCDEFGHIJQLM
NOPQRSTUVWXYZ
e Use the cursor control to select a ET VETErT
letter. AAKAECEEEEII*®
e Push the control to add a letter AIRPARK ON
to the name. If you make a
mistake, you can press the
DELETE soft key.
Press the DONE soft key to save your entry under the name you
spelled.
Storing the current car position in the address book
If you are at a location you would Destination Entry
like to store in the address book,
such as a new restaurant:
e Select ADDRESS BOOK from the
Destination Entry menu.
Press the ADD soft key. 4 Address Book
Press the CURRENT LOCATION
soft key.
e Assign a name to the entry as described in Adding, deleting or
editing the address book above.
Press the DONE soft key to save your entry under the name you
chose.
Current location
To access your current location,
press this control when in
navigation mode. Your current
location and the name/distance to
the next/last intersection are displayed.
Press NAV to return to a guidance display. Press MAP to return to a map
display.
86
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
Detours, route interruptions and changes
If need be, your navigation system Select Detour Criteria
can easily and quickly find the most
efficient detour around road
construction, unexpected traffic or
undesirable roads.
<4 Avoid Current Road
pecific Road
Detour options
You may engage the detour option Select Detour Criteria
when in the Guide display, True
view or Map display screens.
4 Avoid Current Road
Press the control next to DETOUR
to activate.
Use the soft keys to select and enter
your new route criteria. Press the
key to confirm selection. The
following options are available:
e AVOID CURRENT ROAD — Updates your route to avoid the road
which you are on currently.
e AVOID NEXT ROAD — Updates your route to avoid the next road
planned on your journey.
e DETOUR (X) MILES — Provides a detour from the current route for
the noted distance. Use the cursor control to indicate the distance
which needs to be avoided. The range available is based on the length
of your original route.
e AVOID SPECIFIC ROAD — Avoids a specific road on your planned
route.
Route interruptions
In the course of your destination, you may decide to temporarily leave
your planned route for gas, food, etc. If you turn off the ignition, the
option to continue the route guidance will be displayed when the ignition
is turned on again. Use the cursor control to select from one of the
following options:
87
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e Resume route - The navigation Resume Route to:
system displays the Select Route
Criteria screen. Refer to
THE AMERICAN ROAD
: Sie , DEARBORN, MI
Selecting Route Criteria earlier
in this chapter.
e Cancel route - Press to return to ag
the main menu. Seer OS
If the ignition is not turned off,
simply continue along your highlighted route.
Route changes or cancellations
To cancel or change your current Do you want to cancel?
route:
e Press BACK, then select ’Cancel
Guidance’ or
e Press the CANCEL soft key.
4 Cancel Guidance
void Major Roads
Navigation Menu
You are able to make various
adjustments in navigation mode. To ‘@uAudie Options
view the options, press the control
next to “Option Menu” to select
from the following options:
Navigation options
Once in the navigation preference
menu, you may select from the
following options:
e VOICE — Select to turn the voice
output on or off and to adjust the
volume level.
e MAP — Choose between
“Heading up” to put your
direction of travel toward the top of the screen, or “North up” to
ensure that North is always at the top of the screen.
Navigation Options
<< VOICE o .
88
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e UNITS — Press to select from miles or kilometers. When kilometers
are selected, it will affect the map and the fuel economy screen.
Display options
Use this feature to change the Display Options
display setting. This feature can be
accessed by selecting “Display
Options” within the Main Menu.
Use the cursor control to select one
of the following options:
e MODE — auto (automatic), day
or night display settings.
e BRIGHTNESS— provides manual adjustment for screen brightness.
e Turn Display Off— Turns the display off. Press any button to turn the
display back on again.
System options
e Language Selection: Use the System Options
cursor control to select and enter
the desired voice and text
language.
<4 Language Selection
o
Maa aai
4 Clock Setting
e Clock Setting: Your vehicle is equipped with a clock in the VNR
system. To set the clock:
1. Access the CLOCK screen. System Options
4 Clock Setting
89
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
2. Press the ADJUST control to
select the hours or minutes to set.
3. Use the cursor control to increase
or decrease the hours or minutes.
4. Press DONE to set the time.
5. Select the SET soft key to
synchronize/set the minutes and
seconds to GPS time. The hours will remain at the user set value.
You may choose to set the clock to a 12 or 24 hour display.
General information
Federal Communication Commission (FCC) Compliance
Changes or modifications not approved by Ford or Lincoln Mercury could
void user’s authority to operate the equipment. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to consult the dealer or an
experienced radio/TV technician for help.
Cleaning the display
Do not spray cleaning fluid directly onto the unit. Instead, spray onto a
soft cloth and gently wipe the unit. Only recommended products should
be used.
Do not clean any part of the system with benzene, paint thinner or any
other solvent.
Do not spill liquids of any kind onto the unit.
The navigation system utilizes a database stored in a special format on a
CD. It is recommended always to use the latest update of this map CD.
e The navigation system will only work with CDs specifically intended
for your navigation system.
90
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
e Always store the map CDs in their protective cases when not in use.
Map coverage
The following map data CDs are available for the navigation system:
e CDI: California/Nevada/Hawaii
e CD2: Northwest/Southwest
e CD3: North Central
e CD4: South Central
e CD5: Midwest
e CD6: Ohio Valley
e CD7: New England
e CD8: Mid Atlantic
e CD9: Southeast
e CD10: Canada
CDs contain map data for all of the continental United States and parts
of Canada. In some less populated areas, even though a map is displayed,
map data may be incomplete (does not contain one-way street
information, turn restrictions, speed limits, etc.) In these cases, the
system will alert the driver and route guidance directions on the display
are highlighted in “cautionary” yellow.
Ordering additional map CDs
If you wish to order additional maps, or report possible problems with
your current map CD, please call NAVTEQ at 1-(888) NAV-MAPS,
(1-888-628-6277) toll-free or write
NAVTEQ
P.O. Box 543442
Chicago, IL 60654-0442
Website — www.navteq.com
Latest map CDs
The traffic network is constantly changing due to new roads, traffic
restrictions, etc. Therefore, it is not always possible to exactly match the
digital CD map with the current roadways. To help with accuracy, always
use the latest version of the map CD for navigation.
91
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
MANUAL HEATING AND AIR CONDITIONING SYSTEM
(IF EQUIPPED)
1. Temperature selection:
Controls the temperature of the
airflow in the vehicle.
2. Air flow selections: Controls
the direction of the airflow in the
vehicle. See the following for a brief
description on each control.
MAX A/C: Uses recirculated air
through the instrument panel registers to cool the vehicle. This mode is
more noisy than A/C, but is more economical and efficient and may help
prevent undesirable odors from entering the vehicle.
7s : Distributes outside air through the instrument panel vents.
<A: Distributes outside air through the instrument panel vents and
floor ducts.
O (OFF): Outside air is shut out and the fan will not operate.
<A: Distributes outside air through the floor vents.
GA: Distributes outside air through the windshield defroster vents and
floor vents.
QW : Distributes outside air through the windshield defroster vents.
3. A/C: Used to manually enable or disable the operation of the air
conditioning in all modes except Floor & Defrost, Defrost and MAX A/C.
4. Gy : Clears ice and fog from the rear windshield.
5. Fan speed adjustment: Controls the volume of air circulated in the
vehicle.
Since the air conditioner removes moisture from the air, it is considered
normal operation if water drips on the ground under the air conditioner
drain.
The A/C compressor will only function if the outside temperature is
above approximately 2°C (35°F).
OPERATING TIPS
e To reduce fog build up on the windshield during humid weather, place
the air flow selector in the QQ position.
92
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
To reduce humidity build up inside the vehicle: do not drive with the
air flow selector in the O (OFF) or (in cold weather) MAX A/C
position.
e Under normal weather conditions, do not leave the air flow selector in
MAX A/C or O (OFF) when the vehicle is parked. This allows the
vehicle to “breathe” using the outside air inlet vents.
e Do not put objects under the front seats that will interfere with the
airflow to the back seats.
e Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
To aid in side window defogging/demisting in cold weather:
1. Select .
2. Select A/C.
3. Adjust the temperature control to maintain comfort.
4. Set the fan speed to the highest setting.
5. Direct the outer instrument panel vents towards the side windows.
To increase airflow to the outer instrument panel vents, close the vents
located in the middle of the instrument panel.
Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.
93
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEM
(IF EQUIPPED)
AUTO H INV” BNO AZ ww)
ad TT
1. A/C control: Uses outside air to
cool the vehicle. Press to turn on/off
in all modes except G7 or Y.
2. Recirculation control: Used to
manually enable or disable the
operation of recirculated air in all
modes except Q (defrost). Cools the vehicle more quickly by
recirculating the cabin air instead of using outside air and helps prevent
unpleasant outside odors or fumes from entering the vehicle. In
automatic operation, the recirculated air operates automatically as
necessary to achieve the selected temperature.
3. Passenger side temperature
control: Controls the temperature
on the passenger side of the vehicle
when in dual zone mode. To enter
dual zone, press the passenger temperature control or DUAL. The
passenger temperature will appear in the display.
4. Rear defrost control: Removes
ice and fog from the rear window.
Press to turn on/off.
94
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
5. DUAL (Single/dual electric Ca)
temperature control): Allows the
driver to have full control of the
cabin temperature settings (single zone) or allows the passenger to have
control of their individual temperature settings (dual zone control). Press
to enable dual zone mode, press again to return to single zone.
6. (47 : Distributes outside air through the windshield defroster vents.
7. Y : Distributes outside air through the windshield defroster vents
and floor vents.
8. «A : Distributes outside air through the floor vents.
9. <# : Distributes outside air through the instrument panel vents and
the floor vents.
10. -# : Distributes outside air through the instrument panel vents.
11. OFF: Outside air is shut out and
the fan will not operate.
12. AUTO: Press AUTO and then
select the desired temperature. The
system will automatically determine
fan speed, airflow location and outside or recirculated air to heat or cool
the vehicle to achieve the selected temperature.
13. Driver’s side temperature
control: Controls the temperature
for both driver and passenger.
Controls only the driver’s side of the
vehicle if operating in DUAL mode.
14. Fan Speed: Used to manually
enable or disable the fan speed.
15. EXT: Displays the outside air Pi
temperature. It will remain
displayed until the EXT control is
pressed again. The external temperature will be most accurate when the
vehicle has been moving for a period of time.
95
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
16. Temperature conversion: pi
Press to toggle between Fahrenheit
and Celsius temperature on the
DATC display only. The set point temperatures in Celsius will be
displayed in half-degree increments.
Manual override controls: Allows
you to manually determine where
airflow is directed. To return to fully
automatic control, press AUTO.
DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEM
WITH HEATED AND COOLED SEATS (IF EQUIPPED)
p
Jie, l
ooo°o œ ==) jam) ei
( acy] a auto || oFF || 7 Gy ae] w)
1. A/C control: Press to
engage/disengage the air
conditioning in all modes except
defrost and floor/defrost. Uses outside air to cool the vehicle.
2. Recirculation control: Press to
engage/disengage. Used to manually
enable or disable recirculated air
operation. When activated, recirculates air in the cabin thereby reducing
the amount of time to cool down the interior of the vehicle. May also
help reduce undesired odors from reaching the interior of the vehicle.
96
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
Will work in all modes except defrost. In automatic operation, the
recirculated air operates automatically as necessary to achieve the
selected temperature.
3. Passenger side temperature
control: Press to engage the dual
zone feature of the DATC system.
Allows the passenger to choose and
control a different temperature than the driver, if desired.
4. Passenger heated seat: Press to turn on the passenger side
heated seat. Press once for full heat (three lights above passenger
heated seat control will be illuminated). Press a second time to select
medium heat (two lights). Press a third time to select low heat (one
light). Press a fourth time to disengage the feature (all lights will be off).
Note: The passenger heated seat will turn off automatically after 15
minutes of use.
5. RGY (Rear defroster): Press to defrost the rear window. Refer to the
Rear window defroster section in this chapter for more information.
6. Cf Passenger cooled seat: Press to turn on the passenger side
cooled seat. Press once for full cool (three lights above passenger cooled
seat control will be illuminated). Press a second time to select medium
cool (two lights). Press a third time to select low cool (one light). Press
a fourth time to disengage the feature (all lights will be off). Note: The
passenger cooled seat will turn off automatically after 30 minutes of use.
7. GW (Defrost): Distributes outside air through the windshield
defroster ducts and the demister outlets. Can be used to clear ice or fog
from the windshield. The system will automatically provide outside air to
reduce window fogging.
8. J Airflow direction control: Press to toggle through the air
distribution modes listed below. The selected mode will iluminate in the
display.
<4 — Distributes air through the windshield defroster ducts, demister
outlets and the front and rear seat floor ducts. The system will
automatically provide outside air to reduce window fogging.
<A: Distributes air through the floor and rear seat floor ducts. The
system will automatically provide outside air to reduce window fogging.
«7: Distributes air through the instrument panel registers and the front
and rear seat floor ducts.
7s : Distributes air through the instrument panel registers.
97
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
9. OFF: Outside air is shut out and
the fan will not operate.
10. Manual override controls: Allows you to manually select where
airflow is directed. To return to full automatic control, press AUTO.
11. Auto: Press to engage automatic [avro |
temperature control. Use the
temperature control to select the
desired temperature setting. The system will automatically determine fan
speed, airflow location, A/C on or off, and outside or recirculated air to
heat or cool the vehicle, allowing it to reach the desired temperature.
Press and hold AUTO for about two seconds to toggle between single
zone and dual zone temperature control.
12. c Driver heated seat: Press to turn on the driver side heated
seat. Press once for full heat (three lights above driver heated seat
control will be illuminated). Press a second time to select medium heat
(two lights). Press a third time to select low heat (one light). Press a
fourth time to disengage the feature (all lights will be off). Note: The
driver heated seat will turn off automatically after 15 minutes of use.
13. c Driver cooled seat: Press to turn on the driver side cooled seat.
Press once for full cool (three lights above driver cooled seat control will
be illuminated). Press a second time to select medium cool (two lights).
Press a third time to select low cool (one light). Press a fourth time to
disengage the feature (all lights will be off). Note: The driver cooled
seat will turn off automatically after 30 minutes of use.
14. Driver’s side temperature
control: Controls the temperature E
on the driver side of the vehicle in
dual zone and controls the
temperature of both the driver and passenger sides in single zone.
15. Fan Speed: Press to manually
increase/decrease fan speed. In p
manual mode, the display will
show $@ with a bar graph to
indicate fan speed. Fan speed can be manually adjusted in AUTO mode.
To allow the system to automatically control fan speed, press AUTO.
98
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
16. EXT control: Press to display Py
the outside air temperature. Press
again to return to interior
temperature. Note: Exterior readings are most accurate when the
vehicle has been moving for a period of time.
17. Temperature conversion: Py
Press to toggle between Fahrenheit
and Celsius temperature on the
DATC display only. The set point temperatures in Celsius will be
displayed in half-degree increments.
OPERATING TIPS
e To reduce fog build up on the windshield during humid weather, place
the air flow selector in the G7 position.
To reduce humidity build up inside the vehicle: do not drive with the
air flow selector in the O (OFF) or (in cold weather) MAX A/C
position.
e Under normal weather conditions, do not leave the air flow selector in
MAX A/C or O (OFF) when the vehicle is parked. This allows the
vehicle to “breathe” using the outside air inlet vents.
e Do not put objects under the front seats that will interfere with the
airflow to the back seats.
e Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
To aid in side window defogging/demisting in cold weather:
1. Select A .
2. Select A/C.
3. Adjust the temperature control to maintain comfort.
4. Set the fan speed to the highest setting.
5. Direct the outer instrument panel vents towards the side windows.
To increase airflow to the outer instrument panel vents, close the vents
located in the middle of the instrument panel.
Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.
99
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
AUXILIARY A/C-HEATER CONTROLS (IF EQUIPPED)
Your vehicle may be equipped with auxiliary climate controls. These
allow the front or rear seat passengers to control airflow direction,
temperature and fan level of the rear compartment to quickly heat or
cool the vehicle.
Auxiliary climate controls are located in the first row overhead console
and in the floor console on the back of the front row console.
If the main climate control system is in the OFF position, the auxiliary
climate control will not operate.
The auxiliary unit can be controlled either by the front seat occupant(s)
using the front auxiliary control or by the rear seat passenger(s) using
the rear auxiliary control but not both. To control the auxiliary unit using
the rear control, the front auxiliary blower control must be in the REAR
position.
Front auxiliary controls:
1. Temperature control:
Determines airflow temperature in
the rear of the vehicle. If the main
climate control system is cooling in
MAX A/C or L&D mode, the
auxiliary temperature control will
not function as the entire vehicle
will operate at a full cool
temperature.
2. Mode selector: Press to select
air flow direction to «af (Floor) or poj (Panel).
«À Directs air to the floor of the third row seating.
74 directs air to the overhead registers of the second and third row
seating. The selected mode will illuminate on the temperature control.
3. Fan control: Determines fan speed in the auxiliary system. Turn to
REAR to give rear seat passengers control of the rear auxiliary controls.
Otherwise, the front auxiliary control will determine the settings for the
auxiliary A/C-heater. If set to O (OFF), the rear auxiliary controls will
not function.
100
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
Rear auxiliary controls (if equipped):
Once the front auxiliary control is set to REAR, the rear seat passengers
may use the rear auxiliary controls in the floor console to make the
desired adjustments.
1. Temperature control:
Determines temperature levels. If
i
the main climate control system is
!
cooling in MAX A/C or A mode,
the auxiliary controls will not
function as the entire vehicle will
operate at a full cool temperature.
2. Mode selector: Press to select (2)
between air flow to «f (Floor)
or p (Panel).
A Directs air to the floor of the third row seating.
74 directs air to the overhead registers of the second and third row
seating. The selected mode will illuminate on the temperature control.
3. Fan control: Determines fan speed levels.
REAR WINDOW DEFROSTER Gy
Used to manually enable or disable
rear window defrost in all modes.
After approximately 10 minutes of CO
rear defrost operation, the climate
control system will automatically
disable the rear defrost operation. If
desired, the rear defrost can be
manually disabled through the use
of the rear defrost button. When
operating, the rear defrost indicator will be lit. The rear window
defroster switch also activates the standard exterior mirror defrost
feature.
Do not use razor blades or other sharp objects to clean the inside
of the rear window or to remove decals from the inside of the
rear window. This may cause damage to the heated grid lines and
will not be covered by your warranty.
101
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
HEADLAMP CONTROL -O-
Rotate the headlamp control to the -
first position PÉ to turn on the W- One „40
parking lamps. Rotate to the second ZO ¥
position ZD to turn on the
headlamps.
Foglamp control (if equipped) £0
The headlamp control also operates
the foglamps. The foglamps can be
turned on when the headlamp
control is in the PE , -@- or 2D
positions and the high beams are
not turned on.
Pull headlamp control towards you
to turn foglamps on. The foglamp
indicator light £0 will illuminate.
Autolamp control -®:
The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
The autolamp system also keeps the
lights on for approximately 20
seconds or on vehicles equipped
with a message center, you can
select a delay from 0-180 seconds, after the ignition switch is turned to
OFF.
e To turn autolamps on, rotate the control counterclockwise.
e To turn autolamps off, rotate the control clockwise to OFF.
102
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
Daytime running lamps (DRL) (if equipped)
Turns the foglamps on at full intensity output. To activate:
e the ignition must be in the ON position and
e the headlamp control must be in the OFF or Parking lamps position.
Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Lamp (DRL) system
does not activate the tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.
High beams ZD
Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.
Flash to pass
Pull toward you slightly to activate
and release to deactivate.
103
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
PANEL DIMMER CONTROL
Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parklamp operation.
Move the control to the full upright
position, past detent, to turn on the
interior lamps.
Move the control to the full down
position, past detent, to prevent the interior lights from illuminating
when the doors are opened.
VERTICAL AIM ADJUSTMENT
1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters)
away.
e (1) 8 feet (2.4 meters)
e (2) Center height of lamp to
ground
e (8) 25 feet (7.6 meters)
e (4) Horizontal reference line
2. Measure the height from the
center of your headlamp (indicated
by a 3.0 mm circle on the lens) to the ground and mark an 8 foot (2.4
meter) horizontal reference line on the vertical wall or screen at this
height (a piece of masking tape works well).
3. Turn on the low beam headlamps to illuminate the wall or screen and
open the hood. Cover one of the headlamps so no light hits the wall.
4. On the wall or screen you will LIE
observe a light pattern with a Koma SS
distinct horizontal edge towards the pea add
right. If this edge is not at the
horizontal reference line, the beam will need to be adjusted so the edge
is at the same height as the horizontal reference line.
104
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
5. Locate the vertical adjuster on
each headlamp, then use a 10 mm
socket/wrench to turn the adjuster
either counterclockwise (to adjust
down) or clockwise (to adjust up)
aligning the upper edge of the light
pattern up to the horizontal line.
6. HORIZONTAL AIM IS NOT
REQUIRED FOR THIS VEHICLE
AND IS NON-ADJUSTABLE.
7. Repeat Steps 3-5 for the other headlamp.
8. Close the hood and turn off the lamps.
TURN SIGNAL CONTROL 4 D
e Push down to activate the left
turn signal.
e Push up to activate the right turn
signal.
INTERIOR LAMPS
Front row map lamps (if equipped)
To turn on the map lamps, press the
rear edge of the lamp.
105
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
Front row map/dome lamp (if equipped)
The dome lamp lights when: 1
e any door is opened,
e the instrument panel dimmer L an EA
switch is rotated up until the | M) A\
courtesy lamps come on, and g @
e any of the remote entry controls
are pressed and the ignition is
OFF.
The map lamps are activated by pressing the controls on either side of
the lens.
Second row map lamps (if equipped)
The second row map lamps are
located in the headliner above the
second row seats.
e Press the controls to activate the O
lamps.
Rear cargo lamp
The dome lamp lights when:
e any door is opened, and the
switch is in the middle position.
the instrument panel dimmer (O)
switch is rotated up until the
courtesy lamps come on.
any of the remote entry controls
are pressed and ignition is OFF
(and switch is in the middle
position).
With the ignition key in the ACC or ON position, the rear dome lamp can
be turned ON or OFF by sliding the control.
106
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
BULB REPLACEMENT
Headlamp Condensation
The headlamps are vented to equalize pressure. When moist air enters
the headlamp(s) through the vents, there is a possibility that
condensation can occur. This condensation is normal and will clear
within 45 minutes of headlamp operation.
Replacing exterior bulbs
Check the operation of all the bulbs frequently.
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America to ensure
lamp performance, light brightness and pattern and safe visibility. The
correct bulbs will not damage the lamp assembly or void the lamp
assembly warranty and will provide quality bulb burn time.
Number of bulbs
Headlamps (low-beam) 9006
Headlamps (high-beam) 2 9005
Front park/turn/sidemarker 2 3457 K
lamps
[Rear cargo lamp | TB
[2nd row reading lamp | 2 | 58B |
Turn/tail/brake/sidemarker 3157K or 4157K
|
Approach/mirror turn signal 2
el
Mirror approach lamps — non *See your dealer
turn signal Gf equipped)
2
107
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
Number of bulbs
High-mount brake lamp
All replacement bulbs are clear in color except where noted.
To replace all instrument panel lights - see your dealer
* To obtain replacement approach lamp assembly bulbs, see your
dealer and reference Ford part no. 2L1Z—13B374—BB for the passenger
side mirror and 2L1Z—-13B375-BB for the driver side mirror.
Replacing the interior bulbs
Check the operation of all bulbs frequently.
Map lamps
To change the map lamp bulbs:
1. Use a small screwdriver to
remove the map lamp lens.
2. To remove the old bulb, twist 1⁄4
turn and pull it out.
3. Twist in a new bulb.
4. Align and press the map lamp
lens back on and test the lamp operation.
Replacing headlamp bulbs
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
3. At the back of the headlamp,
remove the two headlamp assembly
retainer bolts.
4. Loosen the vertical bolt on the
backside of the headlamp assembly.
Do not remove it.
5. Slide headlamp assembly forward
and off of guide ribs to expose the
back of the bulb and wiring connector.
108
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
6. Pull off the bulb covers.
7. Once the bulb covers are
removed, the bulbs can be removed
by turning them counterclockwise
and then pulling the bulbs straight
out.
Handle a halogen headlamp bulb carefully and keep out of
children’s reach. Grasp the bulb only by its plastic base and do
not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.
8. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb
clockwise to install.
9. Reinstall the bulb covers.
10. Replace the headlamp assembly and tighten all three retainer bolts to
secure.
Replacing HID headlamp bulbs (if equipped)
The low beam headlamps on your vehicle use a “high intensity discharge”
source. These lamps operate at a high voltage. The bulb is NOT
replaceable. When the bulb is burned out, the lamp assembly must be
replaced by your dealer or a qualified technician.
Replacing front parking lamp/turn/sidemarker signal bulbs
1. Make sure that the headlamp control is in the OFF position.
2. Open the hood.
109
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
3. Remove the two headlamp Z ~.
assembly retainer bolts and lamp ~ >
assembly from the vehicle.
4. Loosen the vertical bolt on the
backside of the headlamp assembly.
Do not remove it.
5. Slide headlamp assembly forward
and off of guide ribs to expose the
back of the bulb and wiring connector.
6. Rotate the bulb socket
counterclockwise and remove from
the lamp assembly.
7. Carefully pull the bulb out of the
socket and push in the new bulb.
8. Install the bulb socket into the
lamp assembly and rotate clockwise.
9. Replace the lamp assembly and
install all three retainer bolts on the
lamp assembly.
Replacing tail/stop/turn/sidemarker/backup lamp bulbs
The tail/stop/turn/sidemarker/backup
lamp bulbs are located in the same
portion of the tail lamp assembly,
one just below the other. Follow the
same steps to replace either bulb: eS
1. Make sure the headlamp switch is
in the OFF position and then open
the liftgate to expose the lamp
assembly screws.
(Oaa
2. Remove the two screws from the
lamp assembly.
3. Carefully remove the lamp assembly away from the vehicle by pulling
the assembly straight out to expose the bulb socket. DO NOT TIP THE
LAMP ASSEMBLY SIDEWAYS.
4. Rotate the bulb socket counterclockwise and remove from lamp
assembly.
5. Pull bulb straight out of socket and snap in the new bulb.
110
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
6. Install the bulb socket into the lamp assembly and rotate clockwise.
7. Carefully install the tail lamp assembly on the vehicle by securing the
lamp assembly with two screws.
Replacing foglamp bulbs
Handle a halogen headlamp bulb carefully and keep out of
children’s reach. Grasp the bulb only by its plastic base and do
not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.
1. Remove the bulb socket from the
foglamp by turning pE,
counterclockwise. =l
2. Disconnect the electrical lo
connector from the foglamp bulb.
3. Connect the new foglamp bulb to the electrical connector.
4. Install the bulb socket in the foglamp turning clockwise.
High-mount brakelamp
To change the high-mount
brakelamp bulbs:
1. Remove the two screws holding
the lamp assembly in place.
111
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
2. Pull the lamp assembly straight
out.
3. Remove the wire harness.
4. Depress the four tabs that hold
the light assembly on, one at a time,
and pull the black bulb carrier away
from the lamp.
5. Pull the old bulb out and replace
with the new bulb.
6. Snap the black bulb carrier into
the lamp assembly.
7. Replace the wire harness.
8. Replace the lamp assembly.
Replacing license plate lamp bulb
The license plate bulbs are located in the license plate housing assembly
on the liftgate. To change the license plate bulbs:
1. Make sure the headlamp switch is
in the OFF position.
2. Remove the license lamp screw
from the assembly.
3. Pull the lamp down and twist the
bulb socket counterclockwise.
Remove the bulb socket from the
lamp.
4. Pull out the old bulb and push in
the new bulb.
5. Install the bulb socket in the lamp assembly by turning it clockwise.
6. Install the lamp assembly and secure it with the retaining screw.
112
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
Approach lamp/mirror turn signal bulb removal (if equipped)
To change the bulbs:
1. Make sure the headlamp switch is
in the OFF position and then fold
the mirror forward.
2. Remove the torx screw on the
bottom of the turn signal lens using
a T-10 torx driver.
3. Pull the turn signal lens down to
remove it from the mirror assembly.
4. Disconnect the bulb assembly
from the lens.
5. Remove and replace the bulb.
6. Reverse the order to reassemble lamp and lens.
Approach lamp bulb removal (if equipped)
To change the bulbs:
1. Make sure that all the doors are
closed and the interior lights have
automatically turned off or the ,
opposite mirror approach lamp has
turned off. A
2. With a small flat tipped Cy
screwdriver, insert the tip into the
approach light module slot located
on the outboard corner of the lens
to release the clip.
3. While holding the clip in the release position, pull the approach light
module down.
4. Remove the two wires from the module and replace the module with a
new one.
5. Reverse the order to reassemble the approach light module.
113
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
MULTI-FUNCTION LEVER
Windshield wiper: Rotate the end
of the control away from you to
increase the speed of the wipers;
rotate towards you to decrease the
speed of the wipers.
Speed dependent wipers: When
the wiper control is on, the speed of
the wipers will automatically adjust
with the vehicle speed. The faster your vehicle is travelling the faster the
wipers will go.
Windshield washer: Push the end
of the stalk:
e briefly: causes a single swipe of
the wipers without washer fluid.
e a quick push and hold: the wipers will swipe three times with washer
fluid.
e along push and hold: the wipers and washer fluid will be activated for
up to ten seconds.
Rear window wiper/washer controls
For rear wiper operation, rotate the
rear window wiper and washer
control to the desired position.
Select:
INT 2 — Normal speed operation of
rear wiper.
INT 1 — Intermittent operation of
rear wiper.
OFF — Rear wiper and washer off.
For rear wash cycle, rotate (and hold as desired) the rear wiper/washer
control to either position.
From either position, the control will automatically return to the INT 2
or OFF position.
114
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Changing the wiper blades
It is recommended that wiper blades are renewed before winter.
To replace the wiper blades:
1. Fold back the wiper arm and P A
position the wiper blade at right 5 7>
angles to the wiper arm. 3 qE =
2. To remove, press the retaining
clip (A) to disengage the wiper AT
blade, then pull the blade down
toward the windshield to remove it (A)
from the arm.
3. Install the new wiper blade on the
arm and press it into place until a click is heard.
Replace wiper blades at least once per year for optimum performance.
Poor wiper quality can sometimes be improved by cleaning the wiper
blades, refer to Windows and wiper blades in the Cleaning chapter.
To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.
Changing rear window wiper blade
The rear wiper arm is designed without a service position. This reduces
the risk of damage to the blade in an automatic car wash.
To replace the wiper blade:
1. Lift and hold the wiper blade off
the glass. 2,
2. Press the release tab to unlock D
wiper blade from wiper arm. = SSE
3. Pull the wiper blade toward the
base of the wiper arm and remove it
from the arm.
4. Attach the new wiper to the
wiper arm and press it into place
until a click is heard.
115
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
TILT STEERING
Push the lever down to unlock the
steering column. While the lever is
in the down position, tilt the
steering column to the desired
position.
While holding the steering wheel,
pull the lever up to its original
position to lock the steering column.
Never adjust the steering
column when the vehicle is
moving.
ILLUMINATED VISOR MIRROR
(IF EQUIPPED)
Lift the mirror cover to turn on the
visor mirror lamp.
116
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Slide on rod feature (if
equipped )
Rotate the visor towards the side
window and extend it rearward for
additional sunlight coverage.
Note: To stow the visor back into
the headliner, visor must be
retracted before moving it back
towards the windshield.
OVERHEAD CONSOLE
The appearance of your vehicle’s overhead console will vary according to
your option package.
Forward storage bin and conversation mirror (if equipped)
The storage compartment may be
used to store two pairs of sunglasses
or similar objects. Press the release vay
control to open the storage
compartment. The door will open
slightly and can be moved to full
open.
The conversation mirror on the
cover allows the driver to view the
rear seating area.
A This does not replace the
rear view mirror.
Moon roof (if equipped)
The moon roof control is located on the overhead console.
Do not let children play with the moon roof or leave children
unattended in the vehicle. They may seriously hurt themselves.
Note: The moon roof will open to the “comfort” position first before
opening all the way. The “comfort” position helps to alleviate rumbling
wind noise which may happen in the vehicle with the roof fully opened.
117
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
To open the moon roof: The moon
roof is equipped with a one-touch
open feature. Press and release
the L control. The moon roof
will open to the “comfort” position.
Press and release the control again
to fully open. To stop the one-touch
open feature press either the p~
or vy control again.
To close the moon roof: Press and
hold the v control until the glass panel stops at the “comfort” position.
Press and hold the control again until the glass stops moving. When fully
closed, the rear portion of the glass panel will appear higher than the
front portion.
To vent the moon roof: Press and hold the AÁ control. The moon
roof must be in the closed position in order to move it into the
vent position. To close, press and hold the p~ control until the glass
panel stops moving.
The moon roof has a built-in sliding shade that can be manually opened
or closed when the glass panel is shut. To close the shade, pull it toward
the front of the vehicle.
When closing the moon roof, you should verify that it is free of
obstructions and ensure that children and/or pets are not in the
proximity of the moon roof opening.
118
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Power quarter rear windows (if equipped)
e Without a moon roof
e With a moon roof
Press the A portion of the VENT control to open the power rear
quarter windows.
Press the v portion of the VENT control to close the power rear
quarter windows.
When closing the power rear quarter windows, you should verify
that it is free of obstructions and ensure that children and/or
pets are not in the proximity of the window opening.
AUXILIARY POWER POINT (12VDC)
Power outlets are designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.
119
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Do not use the power point for
operating the cigarette lighter
element (if equipped).
To prevent the fuse from being Ð
blown, do not use the power ©
point(s) over the vehicle capacity of
12 VDC/180W. vs y
To prevent the battery from being
discharged, do not use the power
point longer than necessary when
the engine is not running.
Always keep the power point caps closed when not being used.
OD
The third auxiliary power point on
the center console is accessible from O
the rear seats.
The rear auxiliary power point is located on the right rear quarter panel.
The power point is accessible from the liftgate or the third row seat.
Equipped with rear climate
control
120
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Not equipped with rear climate
control pe se DY Se
Cigar/Cigarette lighter (if equipped)
Do not plug optional electrical accessories into the cigarette lighter
socket.
Do not hold the lighter in with your hand while it is heating, this will
damage the lighter element and socket. The lighter will be released from
its heating position when it is ready to be used.
Improper use of the lighter can cause damage not covered by your
warranty.
POWER WINDOWS (IF EQUIPPED)
Do not leave children unattended in the vehicle and do not let
children play with the power windows. They may seriously injure
themselves.
When closing the power windows, you should verify they are free
of obstructions and ensure that children and/or pets are not in
the proximity of the window openings.
Press and hold the bottom part of
the rocker switch to open the
window. Press and hold the top part
of the rocker switch to close the
window.
121
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
One touch down
Allows the driver’s window to open
fully without holding the control
down. Press completely down on
the bottom part of the rocker switch
and release quickly. Press the top
part of the rocker switch to stop.
Window lock
The window lock feature allows only
the driver to operate the power
windows.
To lock out all the window controls
except for the driver’s press the left
side of the control. Press the right
side to restore the window controls.
Accessory delay
With accessory delay, the window switches, audio system and moon roof
may be used for up to ten minutes after the ignition switch is turned to
the OFF position or until any door is opened.
MIRRORS
Automatic dimming inside rear view mirror (if equipped)
Your vehicle may be equipped with
an inside rear view mirror with an
auto-dimming function. The
electrochromic day/night mirror will
change from the normal (high OQ m È
reflective) state to the non-glare
(darkened) state when bright lights (glare) reach the mirror. When the
mirror detects bright light from behind the vehicle, it will automatically
adjust (darken) to minimize glare.
The mirror will automatically return to the normal state whenever the
vehicle is placed in R (Reverse) to ensure a bright clear view when
backing up.
Do not block the sensor on the backside of the inside rear view mirror
since this may impair proper mirror performance.
122
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Power side view mirrors Ea
The ignition can be in any position to adjust the power side view mirrors.
To adjust your mirrors:
1. Rotate the control clockwise to -~
adjust the right mirror and rotate LI R
the control counterclockwise to
adjust the left mirror.
2. Move the control in the direction
you wish to tilt the mirror.
3. Return to the center position to
lock mirrors in place.
Heated outside mirrors Li} (if equipped)
Both mirrors are heated
automatically to remove ice, mist
and fog when the rear window
defrost is activated.
Do not remove ice from the
mirrors with a scraper or
attempt to readjust the mirror
glass if it is frozen in place.
These actions could cause
damage to the glass and mirrors.
Signal indicator mirrors (if equipped)
When the turn signal is activated,
the lower portion of the mirror
housing will blink.
Oy
a
123
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Powerfold mirrors (if equipped)
Rotate the 4-way adjustment switch
to the center position. Press the
switch down to auto fold in and
down again to auto fold back to
design position. Powerfold the side
mirrors in carefully when driving
through a narrow space, like an
automatic car wash.
The mirrors may be moved
inward/outward manually, however,
if a mirror is moved manually, it will
need to be reset. To reset: with the
switch in the center position, press
the switch down to fold the mirrors in and wait a short period (8
seconds). An audible "click” will be heard indicating re-synchronization.
If the click is not heard, use the switch to fold the mirrors out, then in,
until the click is heard. After that, the mirrors will operate to their
normal positions until they are again moved manually.
POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)
The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P (Park) position.
Press and hold the rocker control to
adjust accelerator and brake pedal.
e Press the bottom of the control to
adjust the pedals toward you.
e Press the top of the control to adjust the pedals away from you.
The adjustment allows for approximately 3 inches (76 mm) of maximum
travel.
Never adjust the accelerator and brake pedal with feet on the
pedals while the vehicle is moving.
SPEED CONTROL
With speed control set, you can maintain a speed of 30 mph (48 km/h)
or more without keeping your foot on the accelerator pedal. Speed
control does not work at speeds below 30 mph (48 km/h).
124
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
 Do not use the speed control in heavy traffic or on roads that
are winding, slippery or unpaved.
Setting speed control
The controls for using your speed
control are located on the steering
wheel for your convenience. J
1. Press the ON control and release ~ — (>
it.
2. Accelerate to the desired speed.
3. Press the SET + control and
release it.
4. Take your foot off the accelerator
pedal.
5. The indicator light ®) on the
instrument cluster will turn on.
Note:
e Vehicle speed may vary momentarily when driving up and down a
steep hill.
e If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
e If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
125
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Resuming a set speed
Press the RES (resume) control and
release it. This will automatically
return the vehicle to the previously
set speed. The RES control will not
work if the vehicle speed is not
faster than 30 mph (48 km/h).
Increasing speed while using speed control
There are two ways to set a higher
speed:
e Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use the SET +
control to operate the Tap-Up
function. Press and release this
control to increase the vehicle set
speed in small amounts by 1 mph
(1.6 km/h).
e Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.
Reducing speed while using speed conirol
There are two ways to reduce a set
speed:
e Press and hold the COAST/CST
control until you get to the
desired speed, then release the
control. You can also use the
COAST/CST control to operate
the Tap-Down function. Press and
release this control to decrease
the vehicle set speed in small
amounts by 1 mph (1.6 km/h).
126
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
e Depress the brake pedal until the
desired vehicle speed is reached,
press the SET + control.
Turning off speed control
There are two ways to turn off the speed control:
e Depress the brake pedal. This will not erase your vehicle’s previously
set speed.
e Press the speed control OFF
control.
Note: When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.
127
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
STEERING WHEEL CONTROLS (IF EQUIPPED)
These controls allow you to operate some radio and climate control
features.
Audio control features
Press J? to select:
e AM, FM1, FM2,
e CD, or
e DVD (if equipped).
In AM, FM1, or FM2 mode:
e Press MEM to select preset
stations within the selected radio
band.
In CD mode:
e Press MEM to select the next
selection on the CD.
In any mode:
e Press VOL + or — to adjust
volume.
128
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Climate control features
Press TMP + or - to adjust
temperature.
Press $@ + or - to adjust fan speed.
HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED)
The HomeLink® Wireless Control System, located on the driver’s visor,
provides a convenient way to replace up to three hand-held transmitters
with a single built-in device. This feature will learn the radio frequency
codes of most transmitters to operate garage doors, entry gate operators,
security systems, entry door locks, and home or office lighting.
When programming your HomeLink® Wireless Control System to
a garage door or gate, be sure that people and objects are out of
the way to prevent potential harm or damage.
Do not use the HomeLink® Wireless Control System with any garage
door opener that lacks safety stop and reverse features as required by
U.S. federal safety standards (this includes any garage door opener
model manufactured before April 1, 1982). A garage door which cannot
detect an object, signaling the door to stop and reverse, does not meet
current U.S. federal safety standards. For more information, contact
HomeLink® at: www.homelink.com or 1-800-355-3515.
129
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Retain the original transmitter for use in other vehicles as well as for
future programming procedures (i.e. new HomeLink® equipped vehicle
purchase). It is also suggested that upon the sale of the vehicle, the
programmed Homelink® buttons be erased for security purposes, refer to
Programming in this section.
Programming
Do not program HomeLink® with the vehicle parked in the garage.
Note: Your vehicle may require the ignition switch to be turned to the
ACC position for programming and/or operation of the HomeLink®. It is
also recommended that a new battery be placed in the hand-held
transmitter of the device being programmed to HomeLink® for quicker
training and accurate transmission of the radio-frequency signal.
1. Press and hold the two outside
buttons releasing only when the 1
indicator light begins to flash after
20 seconds. Do not repeat Step 1
to program additional hand-held
transmitters to the remaining two
HomeLink® buttons. This will erase /
previously programmed hand-held N
transmitter signals into HomeLink®. \ 7
2. Position the end of your
hand-held transmitter 1-3 inches (2-8 cm) away from the HomeLink®
button you wish to program (located on your visor) while keeping the
indicator light in view.
3. Simultaneously press and hold
both the HomeLink® and hand-held
transmitter button. Do not release
the buttons until Step 4 has
been completed.
Some entry gates and garage door
openers may require you to replace |
Step 3 with procedures noted in the
“Gate Operator and Canadian Programming” in this section for Canadian
residents.
4. The indicator light will flash slowly and then rapidly. Release both
buttons when the indicator light flashes rapidly. (The rapid flashing light
indicates acceptance of the hand-held transmitters’ radio frequency
signals.)
130
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
5. Press and hold the just-trained HomeLink® button and observe the
indicator light. If the light is constant, programming is complete and your
device should activate when the HomeLink® button is pressed and
released. Note: To program the remaining two HomeLink® buttons,
begin with Step 2 in the “Programming” section — do not repeat Step 1.
Note: If the indicator light blinks rapidly for two seconds and then turns
to a continuous red, proceed with Steps 6 through 8 to complete
programming of a rolling code equipped device.
6. At the garage door opener receiver (motor-head unit) in the garage,
locate the “learn” or “smart” button (usually near where the hanging
antenna wire is attached to the unit).
7. Press and release the “learn” or “smart” button. (The name and color
of the button may vary by manufacturer.)
Note: There are 30 seconds in which to initiate Step 8.
8. Return to the vehicle and firmly press, hold for two seconds and
release the HomeLink® button. Repeat the press/hold/release sequence
again, and, depending on the brand of the garage door opener (or other
rolling code equipped device), repeat this sequence a third time to
complete the programming.
HomeLink® should now activate your rolling code equipped device. To
program additional HomeLink® buttons begin with Step 2 in the
“Programming” section. For questions or comments, please contact
HomeLink at www.homelink.com or 1-800-355-3515.
Gate Operator & Canadian Programming
During programming, your
hand-held transmitter may tty
automatically stop transmitting —
not allowing enough time for
HomeLink® to accept the signal
from the hand-held transmitter.
After completing Steps 1 and 2 |
outlined in the “Programming”
section, replace Step 3 with the following:
Note: If programming a garage door opener or gate operator, it is
advised to unplug the device during the “cycling” process to prevent
overheating.
131
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Continue to press and hold the HomeLink® button (note Step 3 in the
“Programming” section) while you press and release — every two
seconds (“cycle”) your hand-held transmitter until the frequency
signal has been accepted by the HomeLink®. The indicator light will
flash slowly and then rapidly after HomeLink® accepts the radio
frequency signal.
e Proceed with Step 4 in the “Programming” section.
Operating the HomeLink® Wireless Control System
To operate, simply press and release
the appropriate HomeLink® button. 4%)
Activation will now occur for the
trained product (garage door, gate
operator, security system, entry
door lock, or home or office lighting
etc.). For convenience, the |
hand-held transmitter of the device
may also be used at any time. In the event that there are still
programming difficulties, contact HomeLink® at www.homelink.com or
1-800-355-3515.
Erasing HomeLink® buttons
To erase the three programmed
buttons (individual buttons cannot PA
be erased):
e Press and hold the two outer Q () O
HomeLink® buttons until the
indicator light begins to
flash-after 20 seconds. Release \ /
both buttons. Do not hold for \ /
longer that 30 seconds. V
HomeLink® is now in the train (or
learning) mode and can be programmed at any time beginning with Step
2 in the “Programming” section.
Reprogramming a single HomeLink® button
To program a device to HomeLink® using a HomeLink® button previously
trained, follow these steps:
1. Press and hold the desired HomeLink® button. Do NOT release the
button.
132
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
2. The indicator light will begin to flash after 20 seconds. Without
releasing the HomeLink® button, follow Step 2 in the “Programming”
section.
For questions or comments, contact HomeLink® at www.homelink.com
or 1-800-355-3515.
ELECTRONIC COMPASS/TEMPERATURE DISPLAY WITHOUT
MESSAGE CENTER (IF EQUIPPED)
Outside air temperature
In vehicles without Dual Electronic
Automatic Temperature Control TRIP 6308.2
(DATC), the outside temperature 4530F
display is contained in the J
instrument cluster and displays all
the time. In vehicles with DATC, the
temperature displays in the climate control display.
To turn the display off or change the display from English to Metric see
your dealer.
Compass
The compass reading may be affected when you drive near large
buildings, bridges, power lines and powerful broadcast antennas.
Magnetic or metallic objects placed in, on or near the vehicle may also
affect compass accuracy.
Usually, when something affects the compass readings, the compass will
correct itself after a few days of operating your vehicle in normal
conditions. If the compass still appears to be inaccurate, a manual
calibration may be necessary. Refer to Compass calibration adjustment
in this section.
Most geographic areas (zones) have a magnetic north compass point that
varies slightly from the northerly direction on maps. This variation is four
degrees between adjacent zones and will become noticeable as the
vehicle crosses multiple zones. A correct zone setting will eliminate this
error. Refer to Compass zone adjustment in this section.
133
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the ON position.
3. Start the engine.
4. Locate the reset button on the TAAA A
compass sensor mounted on the TRIE i Ht Hh Hat
base of mirror. ZONE mi
5. Press and hold for six seconds
and release. You will see that ZONE
appears in the instrument cluster
display.
6. Press and release the button until the desired zone number appears.
Note: The range of zone values are from 01 to 15 and “wraps” back to
Ol.
7. When you get to the desired ZONE number, hold the button down to
“lock in” the new value.
The cluster display will return to the “normal” mode when the button
has not been pressed for 6 seconds.
Compass calibration adjustment
Perform this adjustment in an open area free from steel structures and
high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
2. Locate the reset button on the
compass sensor mounted on the
base of mirror.
3. To enter the compass calibration
mode, press and hold the button for greater than eight seconds. The
display will then show CAL in the display window.
134
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
4. Drive the vehicle slowly (less than 3 mph [5 km/h]) in circles until
CAL indicator turns off. As many as 5 complete circles may be required.
5. The compass is now calibrated.
MESSAGE CENTER (IF EQUIPPED)
With the ignition in the ON position,
the message center, located on your
instrument cluster, displays
important vehicle information NW 558858 mi
through a constant monitor of
vehicle systems. You may select
display features on the message center for a display of status preceded
by a brief indicator chime. The system will also notify you of potential
vehicle problems with a display of system warnings followed by a long
indicator chime.
Selectable features
Reset
Press this control to select and reset
functions shown in the INFO menu
and SETUP menu.
Info menu
This control displays the following
control displays:
e Odometer/Compass
e Trip odometer/Odometer/Compass
e Distance to Empty
e Average Fuel Economy
e Trip Elapsed Drive Time
e Outside air temperature
Odometer/Trip odometer
Refer to Gauges in the Instrument Cluster chapter.
135
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Compass display
The compass reading may be affected when you drive near large
buildings, bridges, power lines and powerful broadcast antenna. Magnetic
or metallic objects placed in, on or near the vehicle may also affect
compass accuracy.
Usually, when something affects the compass readings, the compass will
correct itself after a few days of operating your vehicle in normal
conditions. If the compass still appears to be inaccurate, a manual
calibration may be necessary. Refer to Compass zone/calibration
adjustment.
Most geographic areas (zones) have a magnetic north compass point that
varies slightly from the northerly direction on maps. This variation is four
degrees between adjacent zones and will become noticeable as the
vehicle crosses multiple zones. A correct zone setting will eliminate this
error. Refer to Compass zone/calibration adjustment.
Compass zone/calibration adjustment
1. Determine your magnetic zone by
referring to the zone map.
2. Turn ignition to the ON position.
3. Start the engine.
4. From Info menu, select the
Compass/Odometer function. (Do
not select Trip, DTE, or AFE. The
top of the message center must be
blank).
5. Press and release the RESET
control until the message center SETUP ZONE XX
display changes to show the current T nin
zone setting (XX). RESET IF Doi IE
6. Press and release the SETUP
control repeatedly until the correct zone setting for your geographic
location is displayed on the message center. The range of zone values are
from 1 to 15 and “wraps” back to 1.
136
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
7. To exit the zone setting mode,
and to “lock in” your change, press RESET FOR CAL
and release the RESET control. INEO TO EXIT
Perform compass calibration in an open area free from steel structures
and high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
8. Press the RESET control to start
the compass calibration function. CIRCLE SLOWLY
9. Slowly drive the vehicle in a TO CALIBRATE
circle (less than 3 mph [5 km/h])
until the CIRCLE SLOWLY TO
CALIBRATE display changes to CALIBRATION COMPLETE. It will take
up to five circles to complete calibration.
10. The compass is now calibrated.
CALIBRATION
COMPLETE
Distance to empty (DTE)
Selecting this function from the
INFO menu estimates approximately XXX FILES TOE
how far you can drive with the fuel :
remaining in your tank under Nu OBB888.0 mi
normal driving conditions.
Remember to turn the ignition OFF
when refueling to allow this feature to correctly detect the added fuel.
The DTE function will display LOW FUEL LEVEL and sound a tone for
one second when you have approximately 50 miles (80 km) to empty. If
you RESET this warning message, this display and tone will return
within 10 minutes.
DTE is calculated using a running average fuel economy, which is based
on your recent driving history of 500 miles (800 km). This value is not
the same as the average fuel economy display. The running average fuel
economy is reinitialized to a factory default value if the battery is
disconnected.
137
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Average fuel economy (AFE)
Select this function from the INFO
menu to display your average fuel XX fPG
economy in miles/gallon or liters/100 x z
km. NU CO0b08.0 ni
If you calculate your average fuel
economy by dividing gallons of fuel used by 100 miles traveled
(kilometers traveled by liters used), your figure may be different than
displayed for the following reasons:
e Your vehicle was not perfectly level during fill-up
e Differences in the automatic shut-off points on the fuel pumps at
service stations
e Variations in top-off procedure from one fill-up to another
e Rounding of the displayed values to the nearest 0.1 gallon (liter)
1. Drive the vehicle at least 5 miles (8 km) with the speed control
system engaged to display a stabilized average.
2. Record the highway fuel economy for future reference.
It is important to press the RESET control (press and hold RESET for 2
Seconds in order to reset the function) after setting the speed control to
get accurate highway fuel economy readings.
Trip elapsed drive time
Select this function from the INFO =
menu to display a timer. TIMET XX: XX: XX
To operate the Trip Elapsed Drive nu OGGSSL.G ni
Time perform the following:
1. Press and release RESET in order
to start the timer.
2. Press and release RESET to pause the timer.
3. Press and hold RESET for 2 seconds in order to reset the timer.
Outside air temperature (if equipped)
Press and hold the INFO button for =
2 seconds to display the outside IS F
temperature. To switch from a blank N i
display to the temperature display, Nu OO0000.0 mi
hold the INFO button for 2 seconds
until the temperature is seen in the display. To switch the temperature
138
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
display to compass display, hold the INFO button again for 2 seconds
until the compass heading is seen in the display
To turn the display off or change the display from English to metric see
your dealer.
Setup menu
Press this control for the following
displays:
e System Check
e Autolock
e Easy Exit Seat
e Autolamp Delay
e Language
e Units (English/Metric)
Autolocks
This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.
1. To disable/enable the autolock
feature, select this function from the AUTO LOCKS
SETUP control for the current >ON OFF
display mode.
2. Press the RESET control to turn
the autolocks ON or OFF.
Easy exit seat (if equipped)
This feature automatically moves the drivers seat backwards for easy exit
from the vehicle.
1. To disable/enable the easy exit
seat feature, select this function FASY EXIT SEAT
from the SETUP control for the >ON OFF
current display mode.
2. Press the RESET control to turn
the easy entry exit seat ON or OFF.
Autolamp delay
This feature keeps your headlights on for up to three minutes after the
ignition is switched off.
139
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
1. To disable/enable the autolamp
delay feature, select this function
from the SETUP control for the
current display mode.
AUTOLARP DELAY
>0 i co
2. Press the RESET control to select
the new Autolamp delay values of >0, >10, >20, >30, >60, >90, >120 or
>180.
Reverse Sensing System (if equipped)
This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.
1. To disable/enable the reverse
sensing system feature, put the
vehicle in R (Reverse).
2. Press the RESET control to turn
the park assist ON or OFF.
Language
PARA ASSIST
>ON DFF
1. Select this function from the
SETUP menu for the current
language to be displayed.
ENGLISH
RESET FUR NEW
2. Pressing the RESET control (
cycles the message center through FOR ENGLISH
each of the language choices. HOLD RESET
3. Press and hold the RESET G =
control to set the language choice. SET TO
ENGLISH
Ki
Units (English/Metric)
1. Select this function from the
SETUP menu for the current units HINITS
to be displayed. =
> ENG METRIC
2. Press the RESET control to
change from English to Metric.
140
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
System check
Selecting this function from the
SETUP menu causes the message BOESS RESET
center to cycle through each of the EOR SUS CHECK
systems being monitored. For each
of the monitored systems, the
message center will indicate either an OK message or a warning message
for three seconds.
Pressing the RESET control cycles the message center through each of
the systems being monitored.
The sequence of the system check report and how it appears in the
message center is as follows:
1. DOOR STATUS
. ENGINE TEMP
. CHARGING SYSTEM
. OIL PRESSURE
. BRAKE FLUID LEVEL
. TIRE PRESSURE SYSTEM (if equipped)
. ADVANCETRAC® with RSC Gf equipped)
. AIR SUSPENSION SYSTEM
. WASHER FLUID LEVEL
10. FUEL LEVEL
11. DTE
System warnings
System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.
O ONnon Pe W PL
In the event of a multiple warning situation, the message center will
cycle the display to show all warnings by displaying each one for 4
seconds.
The message center will display the last selected feature if there are no
more warning messages. This allows you to use the full functionality of
the message center after you acknowledge the warning by pressing the
RESET control and clearing the warning message.
Warning messages that have been reset are divided into three categories:
e They cannot be cleared until the condition is corrected.
141
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
e They will reappear on the display ten minutes from the reset.
e They will not reappear until an ignition OFF-ON cycle has been
completed.
This acts as a reminder that these warning conditions still exist within
the vehicle.
Park assist ON/OFF (if Warning displays when R (reverse)
Warning returns after 10 minutes
Warning returns after the ignition key
is turned from OFF to ON.
equipped)
equipped)
Check park assist Gf equipped)
Low washer fluid level
equipped)
(if equipped)
Check fuel cap
142
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
Warning display
Will not clear until condition is
Reduced engine power corrected
control or engine fail safe mode
PARK ASSIST ON/OFF (if equipped). Displayed when the
transmission is in R (Reverse) and the Backup Aid is disabled. Refer to
Backup Aid in this section to enable.
CHECK PARK ASSIST (if equipped). Displayed when the
transmission is in R (Reverse) and the Backup Aid is disabled. Refer to
Backup Aid in this section to enable.
ADVTRAC ON (if equipped). Displayed when the AdvanceTrac® with
RSC is ON.
ADVTRAC OFF (if equipped). Displayed when the AdvanceTrac® with
RSC is OFF.
DOOR AJAR. Displayed when a door is not completely closed.
LIFTGATE OR LIFTGLASS AJAR. Displayed when the liftgate or
liftgate glass is not completely closed.
CHECK ENGINE TEMPERATURE. Displayed when the engine
coolant is overheating. Stop the vehicle as soon as safely possible, turn
off the engine and let it cool. Check the coolant and coolant level. Refer
to Engine coolant in the Maintenance and Specifications chapter. If
the warning stays on or continues to come on, contact your dealer as
soon as safely possible.
REDUCED ENGINE POWER. Displayed when the engine is
overheating. Stop the vehicle as soon as safely possible, turn off the
engine. If the warning stays on or continues to come on, contact your
dealer as soon as safely possible.
CHECK ELECTRONIC THROTTLE CONTROL or ENGINE FAIL
SAFE MODE. Displayed when the engine has defaulted to a
“limp-home” operation. If the warning stays on or continues to come on,
contact your dealer as soon as possible.
STOP ENGINE SAFELY. Displayed when the engine is overheating.
Stop the vehicle as soon as safely possible, turn off the engine. If the
warning stays on or continues to come on, contact your dealer as soon as
safely possible.
143
2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
LOW TIRE PRESSURE (if equipped ).Displayed when one or more
tires on your vehicle have low tire pressure. Refer to Inspecting and
Inflating Your Tires in the Tires, Wheels and Loading chapter.
TIRE PRESSURE MONITOR FAULT (if equipped). Displayed when
the Tire Pressure Monitoring System is malfunctioning. If the warning
stays on or continues to come on, have the system inspected by your
servicing dealership
TIRE PRESSURE SENSOR FAULT (if equipped). Displayed when a
tire pressure sensor is malfunctioning, or your spare tire is in use. For
more information on how the system operates under these conditions,
refer to Understanding Your Tire Pressure Monitoring System in the
Tires, Wheels and Loading chapter. If the warning stays on or
continues to come on, have the system inspected by your servicing
dealership
LOW FUEL LEVEL. Displayed as an early reminder of a low fuel
condition.
CHECK CHARGING SYSTEM. Displayed when the electrical system is
not maintaining proper voltage. If you are operating electrical accessories
when the engine is idling at a low speed, turn off as many of the
electrical loads as soon as possible. If the warning stays on or comes on
when the engine is operating at normal speeds, have the electrical
system checked as soon as possible.
PARK BRAKE ENGAGED. Displayed when the park brake is engaged.
If the warning stays on after the park brake is off, contact your dealer as
soon as possible.
LOW BRAKE FLUID LEVEL. Indicates the brake fluid level is low and
the brake system should be inspected immediately. Refer to Brake fluid
reservoir in
…[truncated]