Document text
2-580-555-21(1)
SONY.
FM/AM
CD Clock Radio
Operating Instructions
Owner’s Record
The model number and the serial number are located on the bottom.
Record the serial number in the space provided below. Refer to them whenever you call upon
your Sony dealer regarding this product.
Model No. ICF-CD837
Serial No.
For customers who purchased this product in the USA
Please register this product on line at
http://www.sony.com/productregistration.
Proper registration will enable us to send you periodic mailings about new products,
services, and other important announcements. Registering your product will also allow
us to contact you in the unlikely event that the product needs adjustment or modification.
Thank you.
DREAM MACHINE
Dream Machine is a trademark of Sony Corporation.
Printed on 100% recycled paper using
ICF- CD83 7 VOC (Volatile Organic Compound)-free
vegetable oil based ink.
© 2004 Sony Corporation Printed in China
http://www.sony.net/
PRIN
KRR
SRR
en
we
KS
i
Be
KNX y ~
ORE ROI hS
BEE ene sae
SRO ROR ROR SS ROR
ERE
SONY,
XS
Ss
ies
x
R
Tape Cassette Player/Recorder/CD Player/Mini Disc
DAT/Radio/Head Phone/Speaker/MIC/Personals
LIMITED WARRANTY —
Sony Electronics Inc. (“Sony”) warrants this Product (including any accessories) against defects in material or
workmanship as follows:
wore
Soe
Sen
ox
ee
x
X
BS
E
Se
ie
k
A
BX
cee
Seance
aM
ene,
Sone
x
ai
i
ZIRIS
re
BEERS
ene
BRK
i
axe
ee
veoh
sates
Se
<
ee
1, LABOR: For a period of one (1) year from the date of purchase, if this Product is determined to be defective,
Sony will repair or replace the Product, at its option, at no charge, or pay the labor charges to any Sony autho-
rized service facility. After the Warranty Period, you must pay for all labor charges.
X
By 2. PARTS: In addition, Sony will supply, at no charge, new or rebuilt replacements in exchange for defective
X parts for a period of one (1) year. After the warranty period, you must pay for all parts costs.
E
BE
XS 3. ACCESSORIES: Parts and labor for all accessories are for one (1) year.
Z
LZ
ie To obtain warranty service, you must take the Product, or deliver the Product freight prepaid, in either its original
BRE packaging or packaging affording an equal degree of protection, to any authorized Sony service facility. K
SOx
er
This warranty does not cover customer instruction, installation, set up adjustments or signal reception prob- ZK
lems.
ke
This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negli- BS
gence, commercial use, or modification of, or to any part of the Product, including the antenna. This warranty K
does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or KR
attempted repair by anyone other than a facility authorized by Sony to service the Product. This warranty does Bz
not cover Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses or batteries). This warranty BR
is valid only in the United States. IE
SK
KS
R Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Z
BRE Warranty period must be presented to obtain warranty service. ie
Shs Sos
ae This warranty is invalid if the factory applied serial number has been altered or removed from the Product. Z
a BNC
SS us
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE ie
CONSUMER. SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR Zy
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIB- RE
ITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU- Se
LAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. ae
Ske
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations ae
on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. In addition, ys
if you enter into a service contract with the Sony Partnership within 90 days of the date of sale, the limitation on Be
oy
BR
R
how long an implied warranty lasts does not apply to you. This warranty gives you specific legal rights, and you
may have other rights which vary from state to state.
BR
“as
si
Se
=
3
A
BRR
SEK
ROY
For your convenience, Sony Electronics Inc. has established telephone numbers for frequently asked questions:
X
x
K
Say
BE
To locate the servicer or dealer nearest you, or for service assistance or resolution of a service problem, or for
product information or operation, call:
X
K
ORS
BERK
Bees
Si
ners
Roos
re
eos
BX
20
>
3
RCs
Sony Customer Information Services Center
1-800-222-7669
or visit the Sony Web Site:
www.sony.com
sae
S
3
ORR
me
X
L
lees
Bee
Ses
ees
For an accessory or part not available from your authorized dealer, call:
Sess
S
X
x
e
X%
s
ee
BRC EC
3
y
SE
S
1-800-488-SONY (7669)
a
ros
ies
ees
eee
R
BR
ee
LON
Oe
eure
RRS
A
LUZ
Re
a
eS
NY
Ss
D 455714502
To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user
AN to the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user
AN to the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the appliance.
* The graphical symbols are on the bottom of the
enclosure.
INFORMATION
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—lIncrease the separation between the equipment
and receiver.
—cConnect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—cConsult the dealer or an experienced radio/ TV
technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
CAUTION
The use of optical instruments with this product
will increase eye hazard.
Features
¢ Built-in CD player with CD-R/RW playback
function
e Easy to see large green LED display with variable
brightness control function
e Wake to any track of a CD, Radio or Buzzer (dual
alarm)
e Easy nap timer -one push operation
e Extendable snooze time from 10 to 60 minutes
e Various CD play modes with Shuffle/Repeat
function
Precautions
e Operate the unit on the power source specified in
the “Specifications.”
e The nameplate indicating operating voltage, etc. is
located on the bottom of the unit.
¢ To disconnect the power cord (mains lead), pull it
out by the plug, not the cord.
e Do not leave the unit in a location near a heat source
such as a radiator or airduct, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration, or shock.
e Allow adequate air circulation to prevent internal
heat build-up. Do not place the unit on a surface (a
rug, a blanket, etc.) or near materials (a curtain)
which might block the ventilation holes.
¢ Should any solid object or liquid fall into the unit,
unplug the unit and have it checked by a qualified
personnel before operating it any further.
e To clean the casing, use a soft cloth dampened with
a mild detergent solution.
If you have any questions or problems
concerning your unit, please consult your
nearest Sony dealer.
Troubleshooting
Should any problem persist after you have made the
following checks, consult your nearest Sony dealer.
The clock does not show the correct time.
e Has an electrical power outage lasting more than
one minute occurred?
The CD, radio or buzzer alarm does not sound
at the preset alarm time.
e Is the ALARM indicator light on?
The radio alarm is activated but no sound
comes on at the preset alarm time.
e Is the TUNING dial set to a receivable radio station?
e Has VOLUME been adjusted ?
The CD player does not operate.
e Did you close the CD lid?
e Did you place the disc correctly?
The disc should be placed with the labeled
side up.
¢ Dusty or defective disc — Clean the disc with an
optional cleaning cloth. Wipe the disc from the
center out.
e Take out the CD and leave the CD compartment
open for about an hour to remove moisture
condensation.
Sporadic loss of sound in CD operation.
¢ Dusty or defective disc — Clean or replace the disc.
e Volume too high — Reduce the volume.
e Strong vibration.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 8-ohm loads, both channels driven from
100-10 000Hz; rated 1.0W per channelminimum RMS
power, with no more than 10% total harmonic
distortion in AC operation.
CD player section
System: Compact disc digital audio system
Laser diode properties:
Material: GaAlAs
Wavelength: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 yW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7mm aperture.)
Frequency response: 20-20 000 Hz $; dB
Wow and flutter: Below measurable limit
Radio section
Frequency range:
FM: 87.5-108 MHz
AM: 530-1 710 kHz
General
Time display:
12-hour system
Speaker:
66 mm (2 */sinches) dia., 8 Q
Power outputs:
1W + 1 W (at 10% harmonic distortion)
Power requirements:
120 V AC, 60 Hz
Dimensions:
Approx. 246 x 96 x 210 mm (w/h/d)
(Approx. 9 3/4 x 3 7/s x 8 °/s inches) incl.
projecting parts and controls
Mass:
Approx. 1 750 g (3 lb 86 oz)
Design and specifications are subject to change
without notice.
Lead-free solder is used for soldering.
Halogenated flame retardants are not
used in printed wiring boards.
IMPORTANT SAFEGUARDS
For your protection, please read these safety instructions completely before operating the appliance,
and keep this manual for future reference.
Carefully observe all warnings, precautions and instructions on the appliance and in the operating
instructions, and adhere to them.
INSTALLATION
Water and Moisture
Do not use powerline operated appliances near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
Heat
Do not place the appliance near or over a radiator or heat register, or where it is exposed to direct
sunlight.
Ventilation
The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable
operation of the appliance, and to protect it from overheating, these slots and openings must never be
blocked or covered.
-Never cover the slots and openings with a cloth or other materials.
-Never block the slots and openings by placing the appliance on a bed, sofa, rug or other similar
surface.
-Never place the appliance in a confined space, such as a bookcase, or built-in cabinet, unless proper
ventilation is provided.
Accessories
Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall,
causing serious injury to a child or an adult, and serious damage to the appliance. Use only a cart,
stand, tripod, bracket, or table recommended by Sony.
-An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
Wall or Ceiling Mounting
If your appliance can be mounted to a wall or ceiling, mount it only as recommended by Sony.
USE
Power Source
This appliance should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of electrical power supplied to your home, consult your dealer or local
power company. For those appliances designed to operate from battery power, or other sources, refer
to the operating instructions.
Grounding or Polarization
This appliance is equipped with a polarized AC power cord plug (a plug having one blade wider than
the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow
the instructions below:
-For the appliance with a polarized AC power cord plug:
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized
plug by forcing it in.
-For the appliance with a three-wire grounding type AC plug:
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat
the safety purpose of the grounding plug.
Overloading
Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since
this can result in fire or electric shock.
When not in use
Unplug the power cord of the appliance from the outlet when left unused for a long period of time.
To disconnect the cord, pull it out by grasping the plug. Never pull the plug out by the cord.
Power-Cord Protection
Route the power cord so that it is not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to the plugs, receptacles, and the point where the cord exits
from the appliance.
Lightning
For added protection for this appliance during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the appliance due to lightning and powerline surges.
Object and Liquid Entry
Never push objects of any kind into the appliance through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the appliance.
Cleaning
Unplug the appliance from the wall outlet before cleaning or polishing it. Do not use liquid cleaners
or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the appliance.
Clean the appliance only as recommended by Sony.
Attachments
Do not use attachments not recommended by Sony, as they may cause hazards.
ANTENNAS
Outdoor Antenna Grounding
If an outdoor antenna or cable system is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN
TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM
IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges. Section 810 of the National Electrical Code provides information with respect
to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
Antenna Grounding According to the National
Electrical Code
Antenna Lead-in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
Z (NEC Section 810-20)
Ground Clamps
Electric Service
Equipment
NEC-NATIONAL
ELECTRICAL CODE
SERVICE
Damage Requiring Service
Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
-When the power cord or plug is damage or frayed.
-If liquid has been spilled or objects have fallen into the appliance.
-If the appliance has been exposed to rain or water.
-The appliance does not appear to operate normally or exhibits a marked change in performance.
-This indicates a need for service.
-If the appliance does not operate normally when following the operating instructions, adjust only
those controls that are specified in the operating instructions. Improper adjustment of other controls
may result in damage and will often require extensive work
by a qualified technician to restore the appliance to normal operation.
-If the appliance has been subject to excessive shock by being dropped, or the cabinet has been
damaged.
Servicing
Do not attempt to service the appliance yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts
specified by Sony that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the appliance, ask the service technician to perform
routine safety checks (as specified by Sony) to determine that the appliance is in safe operating
condition.
<———
==— Power Service Grounding Electrode System
(NEC Art 250 Part H)
ooo
AC power cord
FM wire antenna
VOLUME
EL BAND
AM FM
TUNING
There is a tactile dot
beside volume to show
the direction to turn up
the volume.
CD/RADIO
indicator
NAP indicator
TRACK
CD PLAY MODE BRIGHTNESS
HUFFLE REPEAT HIGH Low
[normar
si
SHUFFLE REPEAT + mm,
Changing the
Brightness of the
Clock display
Turn BRIGHTNESS to adjust the brightness of the
clock display.
Setting the Clock
1 Plug in the unit.
The display will flash “AM 12:00”.
2 Press CLOCK SET/TRACK for a few
seconds.
You will hear a beep and the hour will start to
flash in the display.
3 Press TIME SET +or - until the correct
hour appears in the display.
Press CLOCK SET/TRACK once.
Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK SET/
TRACK to start the counting of the seconds, and
you will hear two short beeps.
uk
e To set the current time rapidly, hold down
TIME SET + or -.
e In step 5, when you press CLOCK SET/TRACK
after the minute setting to activate the clock, the
seconds start counting from zero.
Playing a CD
An 8 cm (3-inch) CD can be played without an
adaptor.
1 Push 4PUSH OPEN/CLOSE to open
the CD compartment lid and place a disc.
2 Close the CD compartment lid.
Push.
Labeled surface up
Close the lid.
3 Press CD PI.
The CD/RADIO indicator lights up and
“TRACK 01” appears in the display to indicate
that track 1 of the CD is playing.
After you press CD Pll, it takes about 10
seconds before the music starts.
The indication in the display returns to the
current time after about 4 seconds.
4 Turn VOLUME to adjust the volume.
To Press
Pause CD Pll
Resume play after pause CD Pll again
Locate the beginning of kea ~
the current track (AMS*)
Locate the next track PP
(AMS)
Go back at high speed Hold down kee **
Hold down P1**
Hea repeatedly**
Go forward at high speed
Locate the previous track
(AMS)
Locate the succeeding PPI repeatedly**
track (AMS)
Stop play OFF E
* AMS = Automatic Music Sensor
**These operations are possible during both play and
pause.
° During CD playback, every time you press CLOCK
SET/TRACK, the current time and the track
number appear in the display alternately.
About CD-Rs/CD-RWs
This unit is compatible with CD-Rs/CD-RWs but
playback capability may vary depending on the
quality of the disc,the recording device and
application software.
Music discs encoded with
copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright
protection technologies are marketed by some record
companies. Please be aware that among those discs,
there are some that do not conform to the CD standard
and may not be playable by this product.
To handle compact discs
Correct
Handle the disc by its edge.
Incorrect
Do not touch the surface.
Do not stick paper or tape nor
write anything on the
surface.
Notes
e Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do
so may damage the unit. Do not use such discs.
If you press CD II when there is no disc in the CD
compartment, “00” flashes for about 5 seconds on
the display and the unit turns off automatically.
Various Modes of CD
Playback
You can play tracks repeatedly or in random order.
Slide CD PLAY MODE.
As you slide CD PLAY MODE, the play mode
changes as follows:
Legend on CD
PLAY MODE Play mode
“NORMAL” (normal play)
All the tracks are played once.
“REPEAT” (all repeat)
All the tracks are played repeatedly.
“SHUFFLE” (shuffle play)
All the tracks are played once in random order.
“SHUFFLE REPEAT” (shuffle repeat)
All the tracks are played repeatedly in random order.
Playing the Radio
1 Press RADIO*ON to turn on the radio.
The “CD/RADIO” indication will light up.
2 Adjust VOLUME.
3 Select the BAND.
4 Tune in a station using the TUNING dial.
e To turn off the radio, press OFF li - ALARM
RESET.
Improving the
reception
FM:
Extend the FM wire antenna to improve
reception.
AM: Rotate the unit horizontally for optimum
reception. A ferrite bar antenna is built into the
unit.
Do not operate the unit over a steel desk or metal
surface, as this may lead to interference of receptoin.
Setting the Alarm
This clock radio is equipped with 3 alarm modes—
CD, radio and buzzer. Before setting the alarm, make
sure to set the clock (see “Setting the Clock”). This
unit is also equipped with a dual alarm function. You
can set the alarm for two different times ALARM
SET A and ALARM SET B.
To Set the Alarm Time
1 If you will select the CD alarm or radio
alarm, adjust the volume. Also, if you will
select the radio alarm, tune in to the desired
station.
2 Set the ALARM MODE selector to CD,
RADIO or BUZZER. The ALARM A
or ALARM B indicator lights up.
3 Press ALARM SET A or ALARM SET
B for a few seconds. The ALARM A or
ALARM B indicator flashes, depending
on which one you set.
After one beep, the hour will start to flash in the
display.
4 Press TIME SET +or - until the desired
hour appears.
To set the hour rapidly, hold down TIME SET +
or =.
5 Press ALARM SET.
The minute will flash.
Repeat step 4 to set the minute and press
ALARM SET.
The wake-up track number flashes on the display.
7 IF you selected the CD alarm, press
TIME SET +or - select the desired
wake-up track number.
The wake-up track number can be set up to 99.
Its default value is “01”.
8 Press ALARM SET.
Two short beeps confirms the setting, and the
ALARM A or ALARM B indicator
lights up.
For the CD alarm, the track you specified as the
Wake-up track is played first.
(If the CD play mode is set to “SHUFFLE” or
“SHUFFLE REPEAT”, however, all the tracks are
played in random order.)
To Check the Alarm Time
Press ALARM SET A or ALARM SET B. The
display shows the alarm time.
If you press ALARM SET A or ALARM SET B
again, the indication changes to the wake-up track
number . After a few seconds, the display returns to
the current time.
¢ Alarm time in CD alarm, radio alarm and buzzer
alarm is set at PM 12:00 when you purchased the
unit.
ALARM ON
For the CD alarm, the track you specified as the
Wake-up track is played first.
(If the CD play mode is set to “SHUFFLE” or
“SHUFFLE REPEAT”, however, all the tracks are
played in random order.)
If you set the CD alarm when there is no disc in the
CD player or the CD compartment lid is open, the
buzzer alarm will sound at the set time.
For the radio alarm, the station that the tuning dial is
set to will be received.
For the buzzer alarm, the beeping of the alarm
becomes more rapid after every few seconds in three
progressive stages.
Note
When ALARM A and ALARM B are set for the same
time, only ALARM A will result.
To Doze for a Few More
Minutes
Press SNOOZE/SLEEP OFF.
The CD, radio or buzzer alarm turns off but will be
automatically activated again after about 10 minutes.
Every time you press SNOOZE/SLEEP OFF, the
snooze time changes as follows:
10 —> 20 — 30
40 — 50 — 60
The display shows the snooze time for a few seconds
and returns to show the current time. When you press
SNOOZE/SLEEP OFF after the current time
appeared, the snooze time starts from 10 minutes
again.
¢ The maximum length of the snooze time is 60
minutes.
ALARM OFF
The alarm is turned off automatically after 60
minutes.
To Stop the Alarm
Press OFF WE e ALARM RESET to turn off
the alarm.
The alarm will come on again at the same time the
next day.
To Deactivate the Alarm
Set the ALARM MODE selector to OFF.
ALARM A or ALARM B indicator go off.
Using the NAP
Timer
(Count Down Timer)
The NAP timer sounds the buzzer after a present time
duration.
Press NAP repeatedly until the desiresd
minutes is displayed.
Each press changes the display as follows:
OFF.
(current time) — 10 —> 20 —> 30
1204— 90 + 60 q#—
The NAP indicator turns on, and the NAP time is
displayed for a few seconds. NAP timer starts
counting down the NAP time.
When selected NAP time has passed, the beep sound
comes on, and the NAP indicator flashs.
To Stop NAP Timer
Press NAP or OFF E • ALARM RESET
to turn off the buzzer.
To Deactive NAP Timer
Press NAP.
The NAP indicator goes off.
Setting the Sleep
Timer
You can fall asleep to the radio or CD using the built-
in sleep timer that turns off the CD or the radio
automatically after a preset duration.
Press SLEEP during CD or radio play.
You can set the sleep timer to durations of 90, 60, 30,
or 15 minutes. Every push changes the display as
follows:
OFF (current time) > 90 —> 60
Lise 2o
The CD or the radio will play for the time you set,
then shut off.
¢ To turn off the CD or radio before the preset time,
press SNOOZE/SLEEP OFF.
To Use Both the Sleep
Timer and the Alarm
You can fall asleep to the CD or the radio and be
awakened by the CD, radio or buzzer alarm.
1 Set the alarm. (See “Setting the Alarm’)
2 Set the sleep timer. (See “Setting the Sleep
Timer”’.)