Document text
sein; DASH. MOTORIZE DousLe-DIN
DYD/MP3/CD FM-RECEIVER
TH 72 WIDESCREEN TOUCH SCREEN DIGITAL TFT MONITOR
WITH FULL iPod® ConTROL
"WITH DUAL (FRONT AND REAR)USB AND SD
MEMORY CARD PORT AND SIDE PANEL AUX INPUT.
M è |
CE fo13
iPod is a trademark of Apple, Inc.,
registered in the U.S. and other countries.
e 3451 Lunar Court • Oxnard, CA 93030
800.999.1236
User’s Manual
BLUETOOTH™ENABLED
IN-DASH MOTORIZED DOUBLE-DIN
DVD/MP3/CD AM/FM RECEIVER
WITH 7” WIDESCREEN
TOUCH SCREEN DIGITAL TFT MONITOR
WITH FULL iPod® CONTROL
WITH DUAL (FRONT AND REAR) USB
AND SD MEMORY CARD PORT
AND SIDE PANEL AUX INPUT
RDS COMPATIBLE MODEL
i
Dar. . =a
1
y \
ER
| BV9S567BI MULTIMEDIA PLAYER WITH 7-INCH WIDESCREEN TFT MONITOR
Je] tok ea (CS) BLUETOOTH Fie a)
f aux Í E d (mute ( peas ) BOSS ( vyo
30>»
AUDIO SYSTEMS
Boss Audio Systems is not affiliated with Apple, Inc.
INSTRUCTIONS
CONTENTS
Panel Infroduction ne eeik enni noae a 02
Basie Funtlons Aeee aa 03
Remote Contra Fandom Tanna enr aaen S 05
Turmthe Unt OnOff esnean ee 07
Enter nto the Main [tert ee 07
Pilay SD card/ USB memory device serosoa Ra 07
Radio Fünction Operaljoreerecssceasuariselkaata tiisna 08
Disc Function Operai opes sree ee eee 09
PaE eot Bc. E E EE EE 09
DVD/VCD Dise Playback =4eeere eee eee 09
CD Disc cdl \\/0:( 6) eam n 09
MPSIWIMA Format Dise: Playback eccecsee eee eee 09
Touch Menù sl laie leg intenna EE 09
Access setup interface n-ne nnn nennnannnannnannnannnamnennnnnmnnumnnnmnnumnnnnnnnnnmnnnnnmmunmunnmunnmnnnnn 11
General SettİN Gene nesnnnnanininnnanninimnannmnnnannmnnannnmnannnmnnnnnmnanmnmnmnannnsmnannnsmnnnnsmmanmnumnnninn 11
Tine sen e e 11
LANGUAGE Setup ---nemnnntnminninnmininnmunmnnmnmnnmnmnnmunmnnmnnnnmunnnnmunmnnmnmmmmunmmmunmunmunnsin 11
Video Gap i aaa eaa 11
Podo se (te 12
Sirsa aCe | ht 12
ivellieatecillecils (tit aaa E RE E AASA AES 12
Bluetooth Funcion © perationeccsnat anes iube neeae area 14
iPod function operation Re ee ee E E ee ne eee ee ee ee ee ee ee 15
External input Operations 15
Oher Fanc on Opera ONS ee 15
Rear view Rla@ (8 ce eee R 15
eM ce Ci ee 16
Hive) (8-06) ¢ 16
S E (> ee 17
ACCESSOLY -esesnsnnsnnannsnnnmnnneninnmnninanmnanmanmnmnnnninnmanmanmnunmnnennnsnnmnanmanmunmnnnnnsnmmmanmanmanmnnn 18
DVD Parental control (unctionie ene cee eo eeenS 18
Warning: To ensure safety while driving and to comply with laws, drivers should not
watch video or operate the video device while driving.
Ol
INSTRUCTIONS
ACCESSORY
Wire 1PC
USB Cable 1PC
Remote controller 1PC
Warranty card 2PCS
DVD Parental control function
DVD Parental control function
* DVD Parental control function: The default set
for DVD is #8 adult, which means all grades of
DVD can be read without entering password. To
change the default grade,you need to follow the
below procedure: Press SETUP button on the
remote, display will show the system set up menu
and the submenu,select password and enter
0000, you will be able to choose the DVD
grade as default.
18
INSTRUCTIONS
SPECITICATIONS
PONOT SU ate ee ee DC 12V
F OWE! (ANG er =e ea eee eee eae 10.8-16.0V DC
Max operate CUI err eee reer reer emer ere er ere rer Tr 15A
COUNT Sy SUSI eae ee Negative ground
Amp Rating- - - - ---------------------------------------- 85 WattsX4 Channels
FM tuner
European frequency range- ------------------------------- 87.5-108MHz
USA Trequency range 2 =o seas Sesser s sess ae ssae Sear Ss= 87.5-107.9MHz
Signal / Noise a ae a eee et 55dB
Stereo separation ~~~ >> 30dB
Seale SaUn VOR es = ao eee eee See aaa eee eas 20-30dBuv
DISONON ¢2 1 > aaa alas ach aah aath aaa E 1.5%
AM tuner
European frequency range -------------------------------:' 922-1620KHz
USA frequency range - - - - - ------------------------------- 530-1710KHz
Limit noise sensitivity -----------7-7-77-7-7777777777777777777-- 32dB
DVD player
Signal / Noise ratio- - ------------------------------------- 70dB
FFEQUCIICY respons =..-45644--ceeeeeseseoesesesesesaese 20Hz-20KHz
This unit is with switchable frequency.
You can switch from USA frequency to Europe frequency by following the
below steps:
Step1. In main menu, press setup icon to enter the setup interface.
Step2. Press the Radio icon,and insert password 123456, then press “OK”,
the menu from which you can select the radio frequency will show.
Step3. Press “Radio region” and select the desired frequency by pressing the "up"
and "down" arrow, then press it and setting is finished.
17
INSTRUCTIONS
Panel Introduction
@rRDs (CGP)
Gwe) Cops a Coe) Coe ) CD
VOL-
te
. PWR Button
. MUTE Button
. DBAS Button
VOL- Button
. VOL+ Button
. Eject Button
. RESET Button
. USB Slot
. Remote Control Receiver
10. AUX External Input
o ON DO PR WD =
02
INSTRUCTIONS
BASIC FUNCTION
1. PWR Button
Short press this button to power on, long press this button to power off.
In normal situation, press PWR button can return to the main menu.
2. MUTE Button
Press this button to shut off the sound output, re-press this button can resume the
sound output, long press this button can turn off the TFT LCD display.
3. DBAS Button
Press this button to bass on/off.
4. VOL- Button
Press this button to reduce the volume.
5. VOL+ Button
Press this button to increase the volume.
6. Eject Button
Press this button can eject the disc.
7. RESET Button
Press this button and this unit will be restored to the initial state.
8. Dual (front and rear) USB
A Warning: You can only use either front or rear USB at a time. Never connect both
front and rear USB at the same time! This could cause malfunctions.
9. Remote control receiver
It is able of receiving infrared signals launched by the remote control matching the unit.
10. Dual (front and rear) AUX
A Warning: You can only use either front or rear AUX at a time. Never connect both
front and rear AUX at the same time!
03
INSTRUCTIONS
WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
@ Red - ACC ON (+12V)
@ Yellow — 12 V Constant
@ Black — Ground wire
@ Blue - Power Antenna / Remote Amp Turn On
@ Orange — Back-Up Camera Trigger (+)
Jayeeds jybuseay
Jayeads zy jul
a) @
=
=| S
G| e
wl Ss
g| =
=| ©
A
yndul XNY
yndul oƏpIA
Z yndyno capi,
euusjue o1ipey
Joyeads yo seay
Jeyeeds ya] Uo
indinosajoomqns
8490S AM
TROUBLE SHOOTING
CAUSE
Check fuse
Cannot power on | Some factors cause MPU
wrong operation
PROBLEM
After ignition switch
off ,setting
information all lose
Change battery or fuse
Poor performance
Weak si |
of radio station eo
Connot load disk | There is a disk inside
Disc is scratched
Put wrong side of disc into
Cannot play disc euni
Lens is dirty
Cannot switch
language/subtitle | subtitle in disc
Other factors cause MPU
MO Image wrong operation
Cannot watch
image during
driving during driving
There is only one language/
It's not allowed to watch image
@ Grey/Grey black - Right front speaker (+/-)
@ White/White black - Left front speaker (+/-)
e@ Purple/Purple black - Right rear speaker (+/-)
@ Green/Green black - Left rear speaker (+/-)
@ Pink — Parking Brake (-)
Front White/black Grey/black Front
Blue (Radio antenna control)
Blue/White(Remote control forAmplifier)
Orange (CCD)
Bnd aM
=
Red (Key switch/ACC)
Yellow (Battery +)
Black (GND)
Pink (Safety cable)
L yndyno capi,
SOLUTION
Change fuse same as the old one
Press RES button on the panel by
penpoint, then, power on
Reset information and save
Move the car to another place, then research
Remove disc before inserting another one
Change new disc
Insert in the disk with sign side up
Clean lens by lens clean disc
If disc is not with multi-language/subtitle,
it cannot switch language/subtitle
Press [RES] button on the panel by
penpoint, then, power on
Park the car in a safe place, put the car stall
in “ P ” postion, pull up the hand brake,
parking brake wire must be grounded
16
INSTRUCTIONS
IPod function operation
Connect to iPod first, touch [iPod] icon on main interface to access iPod interface, as
shown in below diagram.
Play / Pause Fast forward play / Fast backward play Volume adjustment knob
Previous Song / next Song
Back to the main interface
External input operation
Connect the video input plug with external video input jack, and connect the audio input
plug with external audio input jack.
Touch [Input] icon on main interface to access external input interface.
Audio — You can adjust thevolume, bass, pitch for input audio.
You can adjust the speaker volume by adjusting the front and back,left and right column.
Video — You can adjust the brightness, contrast, saturation and hue for input video.
You can also choose the video standard mode.
tao as
«a
No n SIGNA >
Warning: In AUX mode, you can adjust the angle of screen by press region 1 & region 2.
Press Region 1 to slide up, press Region 2 to slide down.
Other functions
Rear view function
In any running state, the video signal can switch to reverse video state when reversing the
car, and the system shall return to its initial running state after reversing the car.
A Warning
Do not rely on CCD system completely, please make sure you use direct eyesight while
driving.Back rearview system only assists in driving. As the distance range of rearview
system is limited, completely relying on the rearview system during driving may cause
accidents.
Reverse field simulation Rearview backup image
15
INSTRUCTIONS
BASE
11. SD Slot
12. Disc Slot
13. Slot indicator light
04
INSTRUCTIONS
REMOTE CONTROL FUNCTION
| jo |= an =
Ey. POWER ON/OFF
B MUTE
E SOURCE
El EQ
H SEEK+ / SEEK-
O voL-+/voL-
SEL
E Loup
E BAND/P/N
W Loc/RDM
E stop
IB PLAY / PAUSE
E ST/PROG
W o-10+
1.POWER
5
16)
18)
19)
20]
21
22)
23)
24)
25)
26
28
8 |
9 |
10
13|
11]
12)
H
19
22|
23}
24
26|
AMS / RPT
TITLE
AUDIO
SET PLAYING TIME
SUBTITLE
PBC / MENU
UP / DOWN / L/ R ENTER
SLOW
ANGLE
SETUP
OSD
ZOOM
MENU
DSP
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. SOURCE Button
Press this button to change mode.
4. EQ Button
Press this button to choose POP, ROCK,
CLASSIC, EQ off.
5. SEEK+ (»» )/ SEEK-(«<) Button
In normal playback MP3, USB, SD songs,
Press this button to previous song or next
song.
6. VOL+ (=> )/ VOL- (<— )
Press this button to increase or decrease
volume level.
7. SEL Button
Press this button to choose sound feature.
8. LOUD Button
Press this button to startup LOUD function.
9. BAND-P/N Button
In radio mode, press this button to choose
band.
In VCD, DVD mode, press this button to
choose AUTO. PAL or NTSC system.
10. LOC/RDM Button
In radio mode, press this button to switch
between local and direction.
In VCD, CD mode,press this key to randomly
play.
11. STOP Button
Press this button to stop playing.
12. PLAY/PAUSE Button
Press this button to switch between play and
pause.
In stop mode, press this button to play.
13. ST/PROG Button
In radio mode, press this button to choose
stereo or mono station.
In audio mode, it can help STOP button to
programmed play.
05
INSTRUCTIONS
Bluetooth Function Operation
* Enter/exit
Touch [ Bluetooth ] icon in the main interface to enter the bluetooth interface.
Touch ÆJ icon to exit bluetooth interface.
* Pair/link
To use Bluetooth hand-free function, make connection first, i.e. match the host with the
Bluetooth mobile phone.
Operation methods:
Set the host to be matching state, and open the Bluetooth of your mobile phone and use
the mobile phone to search device, the mobile phone shall prompt to match password with
the Bluetooth when it has searched the Bluetooth device.
Input Bluetooth password (0000) to the mobile phone and confirm. The mobile phone
shall prompt whether authorize to this device,please select [Yes]. Phone and Bluetooth
shall automatically connect within 20 seconds. Under any working mode, the host shall
convert to Bluetooth state if there is an incoming call. And the host shall restore to current
mode after hanging up.
When the Bluetooth device matches with this device, the connection status shall
display “ LINK OK ”, otherwise, it shall display “NO LINK ”.
x Dialing
You can dial on mobile phone directly or input phone number through the number buttons
on the screen, click K to delete if there is input error.
After input the phone number, click E to make a call, and click E to hang up the phone.
Click E during a call so as to switch the voice between car speaker and mobile phone.
* Call records
Click Æ to access call records interface as below PIC 2:
Received calls: Touch this button to check all the phone numbers of received calls.
Dialed numbers: Touch this button to check all the dialed phone numbers.
Missed calls: Touch this button to check all the phone numbers of missed calls.
* Bluetooth volume
Click [J to access Bluetooth volume interface as below PIC 3:
72 Received
e Dialed
& missed
PIC 2
PLAY / PAUSE
previous song
next song
PIC 3
14
INSTRUCTIONS
Calibration to re-gain touch
+ Please follow the below instructions to calibrate when there is no touch or
touch is not accurate.
Step 1 :Press the mode button in the unit to switch to DVD mode.
6 7
Step 2: Insert a DVD disc, after DVD is loaded, press the stop button
(as show in picture 1.) in the remote short, the unit will display as show in picture 2.
PRE STOP >#
wa
=e o ee? ae
8
WXYZ
Picture ( 1) Picture ( 2)
Step 3: Press “ ” in the remote as show in picture (3), the unit will display
as show in picture (4)
PBC a) SLOW | | ANGLE
oO ENTER Q SETUP
OSD © 7A a
Picture (3 ) Picture (4)
I NVAL ID KEY
-YE
oe D AO do o
Step 4 :Press “ A ” button in the remote and then quickly press “ Y ” button as show in
picture (5) and you will enter the touch calibration interface as show in picture (6).
r \
a WU
PBC
oO ENTER © SETUP
osD ZOOM | | MENU
à
Picture ( 5) Picture ( 6)
Step 5: User the touch pen to touch the center of the cross cursor, the cross cursor will move
from the center to top left corner, top right corner, right down, left down, when the
cross cursor stop at each corner, touch the center of the cursor. Then the panel will display
OK and leave the calibration interface and the unit regained touch as show in picture (7).
N J
Ņ 7
Picture ( 7 )
13
INSTRUCTIONS
14. 0-10+ Button 22. SLOW Button
Press this button to choose desired song. In audio mode, press this button to slow
section, preset stations. backward and slow forward.
+» Decimal numbers, for example the 19th
song, press 1.9 button; 23. ANGLE Button
+ Centesimal numbers, for example, the In DVD mode, press this button to change
120th song, press 1.2.0 button. play angle.
15. AMS / RPT Button 24. SETUP Button
In radio mode, press this button to browse In audio mode, press this button to choose
stored stations. different set items.
In audio mode, press this button to play
repeatedly. 25. OSD Display
Press this button to display the title chapter
16. TITLE Button and the left time.
In DVD mode, press this button to play
back to the top menu of disc. 26. ZOOM Button
In DVD/VCD mode, press this button to
17. AUDIO Button ZOOM in.
In DVD mode, press this button to switch
language of dialogue. 27. MENU Button
In VCD mode, press this button to choose Press button to back to the main menu.
left track, right track and stereo.
28. DSP
18. SET playing time Press this button to show the time.
In DVD mode, press this button, you can
define playing time. BATTERY CHANGE
When control distance of remote control
19. SUBTITLE Button becomes shorter or no function, please
In DVD mode, press this button to switch change battery. Please confirm polarity
language of subtitle. before change.
One hand press stopper, then pull out battery.
20. PBC Button i g a
In VCD mode, press this button to display
all song menus, work with number button
to choose songs.
21. UP, DOWN, LEFT, RIGHT, ENTER Put battery into controller.
Button
When playing MP3. USB, SD returns to
song menu, up. down selections can be
up / "(4)" button or down / "(7)" key to
select up and down, select and press Ao
key to confirm.
The selected tracks can be played. Press
the left or right arrow keys to "~" or se
key, can be on the next page function
operation.
£
Insert battery holder into controller.
06
INSTRUCTIONS
Turn on/off Host
When the ignition switch is put in ACC or ON position,Press[ (4 ] button on the front panel
to turn on the unit.After the host starts, hold [¢') button for 3 seconds , the host will turn off.
Access main interface
In the other mode, click on the interface to return the icon will switch to the main interface.
Touch the function icons so as to access the
corresponding function operations.
USB/SD Card function operation
When there is a USB device/SD card connected,
the unit can conduct the playback of audio/video/
image files in the USB device/SD card.
Insert/eject USB storage device
1. Connect a USB recorded with media information to the unit by a USB connecting cable.
2. When there is a need to eject the USB device, exit the USB device playback screen
first, and then take out the device.
Insert/eject SD card
1. Insert a SD card recorded with media information into the SD card slot in the unit
correctly until it is locked.
2. When pulling out the SD card, exit SD card playing state first, then press the SD card
and it shall pop up after unlocking.
Enter/exit
Insert a USB storage device or SD card to automatically play data contained in it. If the
unit has connected with a USB device or SD card, touch[ USB Jicon in the main interface
to enter into the external storage playback interface; Touch[ SD Jicon to enter into the SD
card playback interface. During playback, touch the top center area of the screen to pop
up the touch menu, operate touch menu to perform various playback controls.
Play
After SD card/USB removable device being read out, the operation methods are similar
to disk operation methods.
O7
INSTRUCTIONS
Audio setting
Click EJ icon on setup interface to access audio setting interface, as shown in
right(PIC 1) diagram:
You can turn on or turn off the existing functions on audio setting interface.
AUDIO
Steering wheel setting
|. Click Æ icon on setup interface so as to access steering wheel setting interface.
Il.Connect anode and cathode of direction control wire of the car with anode and cathode
of direction control wire of this device, and press the buttons on steering wheel one by
one and record the corresponding sequence and functions, then click [Allocation].
Ill. Click the button of steering wheel needs to be allotted so as to select the
corresponding setting function, such as volume +.
Ill. Buttons on steering wheel shall display the corresponding functions, such as volume +.
e To modify function settings, repeat procedures 3~4. Click [Enter] to save the settings.
e To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat
procedures 3~4 for resetting.
Touch calibration
If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”.
Click icon on setup interface, input password [888888] to confirm to access touch
calibration interface, as shown in below diagram:
Touching methods
Use touch pen to click the center of “+” icon, and move along with center of “+” icon so
as to calibrate the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall
be affected.
12
INSTRUCTIONS
Access setup interface
Click [Setting] icon on main interface to access setup interface.
General setting
Click Ea icon on setup interface to access general setting interface, as shown in below
PIC 1 diagram:
In general setting interface, you can select to turn on or turn off the existing functions.
You can set wallpaper and opening picture you like and check version number of DV/DC,
click icon to browse up/down.
Wallpaper selection
Click seem icon on wallpaper bar.
select wallpaper.
sm , t direction icon shall pop up, click it to
Time setting
Click J icon on setup interface to access time setting interface, as shown in below
PIC 2diagram:
Click æ icon on time bar mR] time setting interface shall display, as shown in
below PIC 3 diagram:
Click? icon beside hour and minute to separately set hour and minute.
P i
o ŒM oo ol olw o m
BOSS Time 42°31, AM
ON
NOT .AVAIL
NOT AVAIL
PIC Pi 2
Language Setup
During use, you can select your familiar language to display menu by language setup.
Click Ej icon on setup interface to access language setting interface, as shown in right
(PIC 4) diagram:
Click the corresponding s==amzas icon on the language bar desired to be set so as to switch
the language type, when there are more than 3 languages, $ direction icon shall pop up,
click it to select your familiar language.
Video setting
Click E icon on setup interface to access video setting interface, as shown in right
(PIC 5) diagram:
At video setting interface, you can adjust brightness, contrast, saturation and hue of the video.
475,
LANGUAGE 420
OM eo ee
TO ee ek
_—Engtish )
Brightness
Contrast
Saturation
Standard Video
DVD Menu Efe lish
DVD Audo: ERrOLISh
DVD subtitTe English
PIC 4
11
INSTRUCTIONS
Radio Function Operation
* Enter/exit
Touch [ RADIO ] icon in the main interface to enter into the radio interface.
Touch ÆJ icon to return to main interface, and then touch other function icons so as to exit
radio mode.
* Band selection
Click [BND] icon so as to switch among FM1,FM2, FM3,AM1, AM2, bands.
* Search/Save radio stations
e Short press [Scan] icon to browse the stored radio stations.
«FM band can save 18 radio stations (Six stations for FM1/FM2/FM3), AM band can save
12 radio stations (Six stations for AM1/AM2).
* Scan radio
Short press 4p icon to manually fine-tune radio stations upward/downward.
Long press <> icon to automatically search and save radio stations.
x Sound setting
Click [EQ] icon can switch to different sound mode.
* Mute on/off
Click [Mute] icon to turn on/off mute function
* TFT on/off
Click [J icon to turn off TFT, and then click the screen area so as to turn on TFT.
Click 90 icon so as to slide screen angle.
RDS Function
RDS function provides series information (such as traffice information, name of station),
and can automatically switch to the station with stronger signal and carries the same
program.
F AF: Touch the button to turn on/off AF mode
HES TA: Touch the button to turn on/off TA mode
E PTY: Touch the button the screen displays program types, users can
search station according to program type
If the unit does not have RDS function, it has no AF/TA/PTY function. The
corresponding icon appears grey.
5
87.50 90.10 98.10 106.1 108.0 87.50
08
INSTRUCTIONS
Disc Function Operation
* Play/eject disc
Play disc
Insert the disc into the disc slot with the printing surface up, system will detect the disc
and automatically take it in to read and play.
Eject disc
(1) Clickr 4 1 button on the panel to eject the disc.
(2) If a disc has not been took away 15 seconds after it is ejected, system will
automatically take in the disc but not play.
A Do not insert two discs or more.
* DVD/VCD disc playback
During playback of disc, touch the middle lower area of the screen to pop up the touch
menu, operate the touch menu to perform various playback controls.(PIC 1)
* CD Disc Playback
After a CD is inserted, system shall access disc reading state immediately.
When there is a disc in the device, click [Disc] at the main interface so as to access disc
reading state.
After the disc being read out, system shall automatically play in sequence.
x MP3/JPEG/MPEG4 disk playing
When the disc contains readable files, such as MP3/JPEG/MPEG4 files, it shall be
automatically read out and played after slipping into DVD player.
During playing, touch the screen area and the touch menu shall pop up. Operate the
touch menu for various playing.
* Touch Menu Function Description
i — Play/pause
Touch the button to pause, retouch it to continue to play.
EH — Stop
Touch the button to enter into prestop status.
K3 fy — Fast forward/backward
Consecutively touch this button to select the speed of fast-forward/fast-backward.
cee — The previous/next song
Touch the button to select the previous/next song.
EE — Volume adjustment button
Touch this button and volume adjustment modulation shall pop up, touch <> button to
adjust the volume.
TT 1/5 CH 1/1
Ts = 00:09:43 <01: : am 00:09:43
| J _ k a
f =
Dm jae | om fice [oom] | om om [ae | me [tee fo] | om
09
INSTRUCTIONS
aoa —Access next menu
Touch it to access the next menu interface.
zen — Time setting
Touch this button to access time setting interface.
EE — Stereo on/off
Touch it so as to turn on/off stereo.
E — Return to root menu
Touch this icon, it shall return to root menu of disk in DVD state and access PBC
menu playing in VCD state. All chapters in the disk shall be displayed on the interface,
touch the chapter icon directly for playing.
ES — Access title menu
Press this button to return to title menu of the disk. Directly click menu bar at title
menu interface for playing.
E — Repeat play
In playing state, touch this button to start repeat play function: Chapter repeat —
Title repeat — repeat all— Off.
During VCD playing, this function only works when PBC is off.
g=y—_ Language selection
Touch this button to select language.
Es Digit keyboard
Touch this button and digit keyboard shall appear, click number buttons directly to
select tracks for playing.
Ea— Randomly play
Touch this button to instantly play each song. Press again to back to the normal play.
El— Zoom in/Zoom out image
Touch this button to zoom in /zoom out the image.
10