Document text
LJ
>
>
<
L
pr
U
User's Guide
MUONO: 7X FM
MUVO:
7X FM
User's Guide
MuVo TX FM
Information in this document is subject to change without notice and does not represent a commitment on the part of Creative
Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd. The software
described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of
the license agreement. It is against the law to copy the software on any other medium except as specifically allowed in the license
agreement. The licensee may make one copy of the software for backup purposes.
The Software License Agreement is found in a separate folder on the installation CD.
Copyright O 2004 Creative Technology Ltd. All rights reserved.
Version 1.1
June 2004
MuVo and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other
countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation. All rights reserved.
Intel and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
CDDB is a trademark of CDDB, Inc.
All other products are trademarks or registered trademarks of their respective owners.
CREATIVE
Contents
Contents
Safety and Handling Instructions
Caring For Your Player .....rrrranrrrrnrrnnnnvrrrnnnnvrnrnnnnnennrannnnrnnnnnnnnennnnnn vi
Introduction
Before You Begin
PLN viii
Software Included ............ccccccsessceceeseeeeeeseeeeeeeeeeeeeecessueeetaneeeeeanes viii
Creative Media Detector .............cccccccccceceeseeeeeseeseeeeseeeees viii
Creative MediaSource ......»rrrnrrnnnrnnnnnnnnrrnnnnnnsrnnnnnnnnennnnener ix
Creative MediaSource Player ..............cccsseceeeeeeees ix
Creative MediaSource Organizer ...........:c:cceseeeees ix
Adobe Acrobat Reader .............cccccsseceecseeeeseeseeeseeesessaneeeees X
Minimum System Requirements ......»rrrrrannnnorrrnnnnnorrrnnnrrnnnnnsnernnnnn X
Document Ge eg EEE xi
VENN AIO Lae xii
Onine FACCISEFAUOM vesener xii
1 A Tour of Your Player
Your Player at a Glance .....»rrnnnrnnnnnnrnnnnnrnnrnnnrnnnnnnennnnnnnnnnnnennnnnne 1-1
Using ine SOE 4 vore 1-3
Scroll Select ce 1-3
Selecting menu OPTIONS ......rrrrrnnnnrvrrrnnnnvvrnnnnnrvnnnnnnnsnnnnnn 1-3
2 Getting Started
Inserting the Battery Løe reesnidn 2-1
Power Source and Level Indicators .......»rrrrrrrnnnrrrrvrnrnnnn 2-2
Installing Drivers and Software ......»rrrnnnnrnnrnnnnrrrrnnnnnrrnrnnnnrennnnnnre 2-3
Connecting the USB Flash Drive to your Computer ................. 2-4
3 Transferring Tracks or Files
Downloading from the internet ........rrnnnrnnnnnennnnrrnnrnennnnrnnnnennnnenn 3-2
Creative MediaSource ......»rrrrnnrrnnnnnnvrnvnrnnnnnnrnnnrrnnsnnnennnrnnnnnnsenen 3-3
Transferring Tracks or Files .......rrrrrnnrrrrnnnrrvrnnnrrennnnrrennnn 3-3
Editing audio track information .......eerrrnnvnvrrrnnrnvvnrrnnnneen 3-4
Ripping Audio CD Tracks ...........ccccsseeeeeeeeeseeeeeeeeeeseaeeees 3-5
4 Using Your Player
Turning On/Off your Player ...........ccccceccceseeseeeeeseeeeeeeeeseeeeeesaeees 4-2
Disconnecting your Player .....r.rrrnrnnnnnnnnrnnnnnennnnrnrnnnennnnrennnnennnsenn 4-3
NIE PK ee 4-4
Playing IMUSIC TACKS: varmet sdedendiin 4-5
PA WOO SS: Jarre 4-6
Repeating å 10 se Gunton comes 4-7
Sin are 4-9
Playing a track once ......arerrnrrernnrrrrnrrnvnnrennnernnnnsrsnnnennnn 4-10
NOTE aana eceenrseasee eens ee 4-11
Listening to FM Radio ..........ccccccccecseececceeeeeeeeeeeeeeeeeeesseeeeesaaeees 4-11
elle sd Recording REE EE aa Ea 4-17
Making a VOICE recording .-.».»rrranrrrnnnrnvnnrernnnrnrnnrennnnnnnnn 4-17
Recording FM Radio .....rrrannrnrnnnrvvrnnnrnvnnnnnnnnnnennnnnnennnnne 4-18
Playing Recordings .......rrrrnrnnnnnnrnnnnnnnnnnnnnnnennnnsennnsennrnnennnsnnnnnee 4-19
iii
EO Se TINGS oa R E 4-21
Appendixes
Enhancing Your MUSIC .............ccccceececeeeeeeeeeeseeeeeseeeesees 4-21
KIDDING: OIG ONS ger ene E E 4-23
Deleting Tracks .......rrrrnnrennnnennnnnennnnnnnnnnennnennnnnnennnsnnnnnsrnnnsennnne 4-23
VEE PT hr 4-24
Rotating the LCD screen ......rrnrnennrnnnernnnnnenrnnnrnnnnnnrennnn 4-25
Locking and unlocking your Player ......rrrranrrvrnnnrvvrnnrrernnrrrennnnr 4-27
Formatting Your Player .......rrrrrrernnnnvnnnrrnrnnrnnnnnennanennrnnennnennnnnne 4-28
A Technical Specifications
VA EE EE aes epaueaveaanteesgernins A-1
ET aeee e R E A-1
Gana aeriene E A-1
Battery type uenige kenksiki gas degnenkdnkdknee A-1
Battery Life (playback time) .......»rrrrnnrrennnnnernnnnre A-1
Playback Formats .......rrrrnnnnnnrrnnnnnernnnnnennnnnrnnnnnre A-1
Recording FOMALS: Aaermnkesnumiønenanenvn A-1
Signal to Noise Ratio ......rrrrnnnrorrnnnrrrnnrnnnnernnrnnnre A-1
Channel Separation .......rrrrnnrrrrrrnnnrrrvrrnnnrvrnnnnnnre A-2
Frequency Response ............cccccsseecseeeeseseeseeeeens A-2
Harmonic Distortion .....».rrrarennnnennnnnvannnvanennnnnnnne A-2
Operating System/Firmware ........rrrrrnrnnnnerrnrnnnre A-2
Headphone Out ......rrrrronnrnernrnnnnronnrnnnnsvnnnnsnsnnnnne A-2
KG BD 0) f= EEE A-2
Data Connector ......»rrrrrranrrvrrrnnnrrorrrnnnrrvnrnnrnsvnnnnn A-2
Firmware Support .....rrrranrnernrnnnnnennrnnnnnnnnnnnnnnnnnnn A-2
B Onscreen Diagram and Icon Guide
lförmation Diagrams ENE B-1
POYDA CR ICONS erer E E B-2
Play Mode ICONS Len B-3
Error Diagrams wiicetanseuinsiecixcantnsernannceaiontidinavunsectauanusabhdmaxaiagents B-4
C FAQs and Troubleshooting
UD te C-1
E EEE C-2
VE red C-3
Safety and Handling Instructions
7X FM
Caring For While your player is quite robust, observing these handling procedures wil!
Your Player prolong its life.
Do not store or
use in areas
exceeding 45°C or
113°F.
Do not expose to
heat or incinerate.
Keep away from
strong magnetic
fields.
Do not subject to
excessive force or
impact.
Keep away from
excessive
moisture.
Do not dismantle.
vi
Introduction
\/
Your player supports
WMA files protected
with Digital Rights
Management (DRM).
Congratulations on making an excellent decision in purchasing the Creative
MuVo® TX FM!
Your new multi-format portable player allows you to store songs in the
player's Music Library and also comes equipped with an USB 2.0™
connector, so you can transfer audio tracks and data quickly and easily. With
your player's built-in microphone you can record your voice, and with the FM
radio, you can listen to and record your favorite radio stations.
Your player also supports Advanced EQ features for audio enhancement.
Your portable digital audio player supports multiple audio file formats,
including MP3 and WMA. Recordings are saved in IMA ADPCM formats —
mono for voice and stereo for FM radio.
Vil
7X FM
Before You Begin
Package
Contents
Contents may vary
depending on
product model and
region of purchase.
Software
Included
Creative Media
Detector
O O OOOO
O
O
O
MuVo TX FM (consists of one USB Flash Drive and one battery module)
Armband or neckstrap
Installation CD incorporating PDF User’s Guide
Quick Start Booklet
Stereo earphones
One AAA size battery
Creative Media Detector
Creative MediaSource
Adobe Acrobat Reader
Media Detector makes it easy for you to access multimedia content from
various internal or external media. There is no need to hunt through a maze
of different software to play different types of files.
Media Detector automatically recognizes the insertion or connection of CDs,
VCDs, and external devices like Creative digital audio players. Upon
recognition, the content in the media automatically starts playing.
viii
Creative
MediaSource
Creative
MediaSource
Player
Creative
MediaSource
Organizer
7X FM
Creative MediaSource is your ultimate all-in-one digital entertainment
software, designed for playing, creating, organizing and transferring digital
music. It includes several applications like the MediaSource Player and
Organizer.
For more information and usage details on Creative MediaSource, refer to its
online Help.
Unlike other media players, Creative MediaSource Player provides exclusive
features (such as SmartFit), specially designed to manage and configure
your MuVo TX FM more efficiently. With Creative MediaSource Player, you
can play back a wide variety of digital audio and video formats such as MP3,
WMA, WAV, Audio CD, Midi, VCD and AVI on the computer. You can also
use the integrated recorder in Creative MediaSource to record audio.
Creative MediaSource Organizer is an extended view of the Creative
MediaSource Player, as it provides additional features to help you manage a
huge music library more easily. With it, you can:
O rip Audio CDs and create high quality digital audio files (up to 320 kbps
for MP3 and 160 kbps for WMA).
o configure the settings for the MuVo TX FM with Creative MediaSource
while it is connected to your computer.
O "squeeze" more audio tracks into your player with SmartFit, which
employs intelligent track management and WMA compression.
o view the contents of your computer and your MuVo TX FM using the dual-
window transfer panel, convenient for file transfer.
O locate songs in a few seconds, just by typing some keywords into the
sophisticated music search engine.
Adobe Acrobat
Reader
Minimum
System
Requirements
The software
applications on the
installation CD may
have higher
requirements for
basic functionality.
Refer to each
application's
documentation for
details.
7X FM
Adobe Acrobat Reader is a software application that enables you to view and
print Adobe Portable Document Format (PDF) files on all major computer
platforms.
o Microsoft® Windows® XP, Windows 2000, Windows Millennium Edition
(Me) or Windows 98 Second Edition (SE)
o Intel® Pentium® II 350 MHz, AMD® K6-2® 450 MHz or better processor
(Pentium III 450 MHz or higher recommended for MP3 encoding)
CD-ROM drive with digital audio extraction support
USB 1.1 port (USB 2.0 port recommended)
64 MB RAM (128 MB recommended)
30 MB free hard disk space (more needed for storing audio)
Installed mouse
SVGA graphics adapter (256 colors, 800 x 600 resolution or better)
OO UO OO
7X FM
Document We use icons to highlight useful or urgent information for you:
Conventions
© Tip. This tells you about shortcuts or hints relating to a feature.
Note. This highlights additional or important information about
a feature.
Caution! This highlights proper usage of your product. Follow
these directions to prevent the loss of data, or damage to your
product or system.
Warning! This warns you of possible hazards that may result
in bodily harm or life-threatening situations.
xi
Web
Information
\/
~ DÅ
-
4
`
The driver updates
only work with
MuVo TX FM
players. Do not
install these
updates if you own
a NOMAD MuVo or
NOMAD MuVo NX
player.
Online
Registration
7X FM
Visit www.creative.com regularly for information on:
Firmware updates
MuVo accessories
Tips and tricks
FAQs
Troubleshooting
Documentation updates
software updates or purchases
Technologies used in your player
An online glossary
OOOO U0 CO GC
Enjoy a host of benefits by registering your product during installation, or at
www.creative.com/register.
Benefits include:
o Service and Product support from Creative
o Exclusive updates on promotions and events
CREATIVE
1 Å Tour of Your Player
A Tour of Your Player
7X FM
Your Player at
a Glance
Play/Pause
button
Microphone
LCD screen
Front View
Earphone connector
Scroller
Volume Increase button
Volume Decrease button
Side View
A Tour of Your Player 1-1
Button
PLAY / PAUSE
VOLUME
INCREASE
VOLUME
DECREASE
Cq
SCROLLER
HKB) >>I
OOO
OOO ©
What It Does
turns the player on and off
activates the LCD backlight
starts, pauses or continues playback
increases the volume
decreases the volume
skips to the previous/next track
fast-forwards/rewinds a track
scrolls through menu options
selects menu options
7X FM
Usage Tips
press and hold until the player
turns on or off
when your player is locked,
press to turn LCD backlight on
press and hold to increase the
volume quickly
press and hold to decrease the
volume quickly
during playback, turn the Scroller
to go to the previous or next
track.
during playback, turn and hold
the Scroller to fast-forward or
rewind the track
turn the Scroller to scroll through
menu options and press the
Scroller to select them. This
action Is also referred to as
"Scroll Select"
A Tour of Your Player 1-2
Using the
Scroller
Scroll Select
©
To "Scroll Select",
use the Scroller to
scroll to the option
you want, and select
the option by
pressing the Scroller.
Selecting menu
options
7X FM
The Scroller is one of the most important features of your MuVo TX FM. In
this document, we will use a new term, “Scroll Select”, to indicate that you
should use the Scroller to scroll through options and then select the option by
pressing the Scroller.
HR) mI
The Scroller Use the Scroller to scroll Press the Scroller to select an
(side view) through options option
Depending on the screen you are in, you can have different menu options.
You can also choose options from a list or a confirmation box.
You can use the Scroller to make selections in menus. For example, if you
are looking at the Menu screen:
From the Menu screen to the Play Mode Options screen
1. Use the Scroller to scroll through the menu options.
2. Press the Scroller to select the menu item.
A Tour of Your Player 1-3
CREATIVE
4 Getting Sta rted
Getting Starteo
Inserting the
Battery ©
Power Source
and Level
Indicators
wi
~ DÅ
-
4
The amount of
playback time
available depends on
various factors (for
example, volume
level used). For more
information, see
"Usage" on page C-3.
7X FM
After inserting the battery, your player displays one of the following icons,
depending on the battery's status.
Icon
am
Tr
CD
What the icon means
O your player's battery is full
O your player's battery is 60% full
O your player's battery is 30% full
O your player's battery is nearly
empty
Notes
O this battery state icon
shows that the battery is
full
O change the battery at the
earliest opportunity
Getting Started 2-2
Installing
Drivers and
Software
ye
~
-
4
Windows 98 SE users
must install the drivers
to transfer tracks or
files to the player.
\/
~ Zz.
På
4
To install the software,
Windows 2000/XP
users must log in as
the computer
administrator. For
more information,
refer to your operating
system’s online Help.
TX FM
Your MuVo TX FM comes with drivers for Windows 98 SE, together with
software that helps you create audio tracks, manage your music library and
use your player. Windows XP, Windows 2000 and Windows Me users do not
need to install drivers.
1. Make sure that your player is not connected to your computer.
2. Insert the Installation CD into your CD-ROM drive.
The disc supports Windows AutoPlay mode and starts running
automatically. If not, you need to enable your CD-ROM drive's auto-
insert notification feature. For more details see "AutoPlay" on page C-1.
Click the MuVo TX FM software option to select it.
Click the OK button.
Follow the onscreen instructions to complete the installation.
If prompted, restart your computer.
[7 U a on
Getting Started 2-3
Connecting the
USB Flash
Drive to your
Computer
wi
= aon
-
L \
Your computer’s USB
port may be located on
the back panel. If your
USB Flash Drive does
not fit into the USB
port located on the
front panel, connect it
to the USB port located
on the back panel.
Vy
~ Å
-
AEN
Do not press the
buttons on your USB
Flash Drive while
connecting it to your
computer.
7X FM
You are now ready to connect your player to your computer. Your MuVo TX
FM features a USB 2.0 port for data transfers to and from your computer. Be
sure that you have installed Creative MediaSource before connecting your
player. To transfer audio or data files to your player, refer to "Transferring
Tracks or Files" on page 3-3.
USB Flash Drive
USB port
Battery module
Getting Started 2-4
CREATIVE
Transferring Tracks or Files
7X FM
Transferring Tracks or Files
Creative MediaSource is included on your installation CD (see "Installing
Drivers and Software" on page 2-3).
TF Aeae MediaSource is the best way to organize and transfer audio to and
audio tracks, your from your player. This chapter includes basic instructions on using
player must be in Music — MediaSource to rip audio CDs, transfer tracks by manual selection, edit track
mode. For more
orman arie information as well as to create and edit playlists.
Ko Ar pene. en Alternatively, you can use Windows Media Player to transfer tracks or files. If
you have tracks or files without Digital Rights Management (DRM) content
protection, you can use Windows Explorer to transfer them.
If you wish to download additional music tracks to your player, you can either
Before disconnecting download music tracks from Internet music sites (see "Downloading from the
your player from your internet" on page 3-2) or rip them from audio CDs to your computer.
computer, make sure
that you stop your Music files must, however, be encoded into the supported formats (MP3 or
player Properly frst WMA file formats), then transferred to your player with Creative
(see "Usage" on page C-
3" for more details). MediaSource Organizer.
Data files can also be transferred and stored in your player. For example, if
you want to transfer a large presentation or graphic file from one computer to
another.
Transferring Tracks or Files 3-1
Downloading
from the
internet
V7
It is illegal to encode
MP3 files for trade or
sale unless you have
the express or explicit
permission of the
copyright holder(s).
7X FM
To get MP3 files from the Internet, use a search engine to locate sites with
MP3 content. You can use your MuVo TX FM player to download audio files
from all the major Internet music download services. Follow the instructions
on the site and download the music files to your computer.
Transferring Tracks or Files 3-2
Creative
MediaSource
Transferring
Tracks or Files
After installation, you
must restart your
computer before trying
out any of the installed
applications.
7X FM
Only basic instructions on how to use Creative MediaSource with your player
are provided in this chapter— extensive instructions are found in the
MediaSource Help file.
With Creative MediaSource, you can transfer files and audio tracks to and
from your player.
Using Creative MediaSource
1. If you are not already in Creative MediaSource Organizer, click the
Player/Organizer View button.
2. Click the Show/Hide Right Panel button.
3. In the Sources window, select the source device.
If you are transferring files from PC Music Library to a portable hard disk,
select PC Music Library as your source.
4. Inthe Content window, select the tracks to transfer.
CTRL-click to select multiple tracks.
5. Inthe Right Panel window, click the Source bar and select the
destination.
6. Click the Destination Transfer button to transfer the selected tracks.
The Now Transferring dialog box appears, showing the current transfer
Status.
Using Windows Explorer
1. On your desktop, right-click the My Computer icon, and then click
Explore.
2. Drag and drop tracks/files into your player.
Transferring Tracks or Files 3-3
Editing audio
track information
TX FM
You may need to edit track information when the information is incomplete or
wrong.
To edit information about a track
1.
2.
3.
4.
D.
6.
7.
8.
If you are not already in Creative MediaSource Organizer, click the
Player/Organizer View button.
In the Content window, locate the track you want to edit, and right-click
it.
Select the Properties option. A dialog box appears.
Select the Tag Information tab.
Click any of the track properties under the Property column. The entire
row of information is highlighted.
Click on information in the Value field to edit the information.
Repeat steps 5 and 6 to change other track properties.
Click the OK button when all changes have been made.
The new track information will be stored.
To edit information about multiple tracks
1.
2.
3.
>
If you are not already in Creative MediaSource Organizer, click the
Player/Organizer View button.
In the Content window, locate the tracks you want to edit, hold down the
CTRL key and select them.
Right-click to edit the Album, Artist or Genre.
Type in the new Album, Artist or Genre.
Click the OK button.
Transferring Tracks or Files 3-4
Ripping Audio
CD Tracks
©
Rather than manually
entering track
information, retrieve
such audio CD
information from CDDB
before ripping tracks.
Change the default
ripping format and
bitrate for higher or
lower quality audio.
See Creative
MediaSource’s Help file
for details
7X FM
The first phase in making an MP3 file is extracting audio data from an audio
CD. To extract audio data, you will need a CD-ROM drive that can extract
digital audio data, and a program known as a Ripper. With Creative
MediaSource Organizer, you can rip tracks from most audio CDs. This
application uses the CD-ROM drive to read the audio tracks from the audio
CD and stores it on your hard disk or directly into your player.
The time needed for a successful audio extraction depends on:
o CD-ROM drive speed
O defects, like scratches on the audio CD
o error-checking features on the CD-ROM drive
Encoding is the second phase of making an MP3 file. Encoders are used to
convert the stored audio tracks, usually WAV files, into MP3 files. MP3
encoding is a lossy compression method where some data is lost during
compression. However, using the standard sampling rate and bitrates will
ensure that your MP3 files retain much of their audio quality. The standard
bitrate of most MP3 files is 128 Kbps, although some are set higher, at 160 or
192 Kbps. Higher bitrates will result in larger MP3 file sizes, and may result in
better audio quality. Use Creative MediaSource Organizer to extract audio
tracks and encode MP3s.
You can rip an audio CD’s tracks to your player, hard disk or PC Music
Library. You can choose to rip an entire CD, or selected tracks from the audio
CD.
Transferring Tracks or Files 3-5
7X FM
To rip a CD
1.
2.
3.
4.
Insert an audio CD into your CD-ROM drive.
If you are not already in Creative MediaSource Organizer, click the
Player/Organizer View button.
In the Sources window, select [e:] Audio CD (where "e:" represents
your CD-ROM drive).
In the Task bar, click the Rip Now button.
To rip tracks from an audio CD
1.
2.
3.
Insert an audio CD into your CD-ROM drive.
If you are not already in Creative MediaSource Organizer, click the
Player/Organizer View button.
In the Sources window, select [e:] Audio CD (where e: represents your
CD-ROM drive).
In the Content window, select the tracks to rip.
Ctrl-click or Shift-click to select multiple tracks.
Drag the selected tracks to PC Music Library in the Source window.
The Transfer Queue dialog box appears, showing the current ripping
status.
Transferring Tracks or Files 3-6
CREATIVE
4 Using Your Player
7X FM
Using Your Player
Your player can function in Music, Recordings, Microphone or FM Radio
mode. In Music mode, only MP3 or WMA files are played back and in
Recordings mode, only microphone and FM radio recordings that are
recorded by the player, are played back. To switch between modes, see
"Music Playback" on page 4-4.
Your player also has Play Modes that allow you to change how your tracks
are played back. For more information, see "Play Modes" on page 4-6.
Using Your Player 4-1
7X FM
Turning On/Off Remember to unplug the USB Flash Drive from your computer and insert it
into the battery module before turning on the player.
your Player
- To turn on your player
Y Press and hold the Play/Pause button until your player turns on.
no aao a ena The CREATIVE logo appears onscreen, followed by the MuVo TX FM
message "No Music" or logo. Music tracks stored in your player are automatically played back.
"No Recording" will
appear onscreen,
depending on whether
you are in Music or Press and hold the Play/Pause button until the Power off
Beco ee message disappears.
To turn off your player
S7
Audio track filenames
are sorted in
alphanumeric order.
Using Your Player 4-2
Disconnecting
your Player
7X FM
To disconnect your player in Windows XP, Windows 2000 or
Windows Me
- Click the Safely Remove Hardware icon % on the Taskbar, click Safely
remove USB Mass Storage Device, and disconnect your player when you are
prompted to do so.
Safely remove USE Mass Storage Device - DrivelE: k
= @) 12:05 PM
To disconnect your player in Windows 98 SE
» Make sure that the icon below appears on the LCD screen for at least five
seconds before disconnecting your player.
oe
op -— Set
Using Your Player 4-3
Music
Playback
7X FM
To add audio tracks to your player, see "Transferring Tracks or Files" on
page 3-3.
If you are in Recordings mode and the Recordings Mode icon == appears
onscreen, do the following to return to Music mode.
To enable Music mode
1. Press the Scroller.
The Main Menu (Figure 4-1) appears.
2. Scroll Select the Music icon (Figure 4-2).
Figure 4-2
If you are in Music mode and the Music Mode icon + appears onscreen, do
the following to return to Recordings mode.
To enable Recordings mode
1. Press the Scroller.
The Main Menu (Figure 4-3) appears.
2. Scroll Select the Recordings icon (Figure 4-4).
Recording:
Figure 4-4
Using Your Player 4-4
| | 7X FM
Playing music Follow these steps to play music tracks.
tracks 1. Press the Play/Pause button for a few seconds.
The MuVo TX FM logo appears onscreen, and music tracks stored in
your player are automatically played back.
Play Mode
Icon
Elapsed time — —— Battery Level
Indicator
Play Status Icon
EQ Setting Icon
Music Mode Icon found of mus j c —— Track Title
To pause a track
Press the Play/Pause button |
To stop a track
Press the Play/Pause button to pause the track, and then turn the
scroller towards the right. The Stop icon = appears onscreen.
Using Your Player 4-5
Play Modes
Only one Play Mode
can be enabled ata
time.
7X FM
Your player has Play Modes that allow you to change how your tracks are
played back.
The following Play Modes are available:
A-B
Repeat Track
Repeat All
Repeat Folder
Track Once
Shuffle Repeat
Shuffle Once
Shuffle Folder
Normal
operere COO 0
Play Modes are disabled by setting the “Normal” mode as described in
"Normal mode" on page 4-11.
Using Your Player 4-6
Repeating music
\/
Repeat Folder Mode
is only available in
Music mode.
7X FM
You can choose to repeat a track, folder, all tracks or a portion of a track.
1. Press the Scroller.
The Main Menu (Figure 4-5) appears.
2. Scroll Select the Play Mode icon. A list appears
(Figure 4-6).
3. Depending on which mode you want, follow the
corresponding step: Figure 4-6
To repeat a track in the Playing List
Scroll Select the Repeat Track icon +31.
The Repeat Track icon +31 appears onscreen and the track is repeated
continuously until you stop it or skip to another track.
To repeat a folder
Scroll Select the Repeat Folder icon *25.
The Repeat Folder icon *35 appears onscreen and tracks in the
current folder are repeated continuously until you stop them or skip to
another folder.
To repeat all tracks
Scroll Select the Repeat All icon *- .
The Repeat All icon * appears onscreen and all tracks are repeated
continuously until you stop playback.
Using Your Player 4-7
A portion of a track
can only be repeated
once; marking a new
portion will
automatically
remove any markers
in the track.
7X FM
To repeat a portion of a track
1.
2.
Scroll Select the A-B icon Hes. The fe icon appears, prompting you to
select a start point for the portion of music to repeat.
Press the Scroller to mark the begining of the portion you wish to repeat.
The Ag icon appears, prompting you to select an end point for the
repeat function.
Press the Scroller again, to mark the end point of the portion of music to
repeat. The marked portion of music is played back repeatedly.
To resume normal playback, enable “Normal” mode as described in
"Normal mode" on page 4-11.
Using Your Player 4-8
Shuffling music
7X FM
The Shuffle Play Mode can be used to shuffle all tracks (or tracks in a folder)
once, or to repeatedly shuffle all tracks.
1. Press the Scroller.
The Main Menu (Figure 4-7) appears.
2. Scroll Select the Play Mode icon. A list appears
(Figure 4-8).
Figure 4-8
Depending on which mode you want, follow the corresponding step:
To shuffle all tracks once
Scroll Select the Shuffle Once icon.
The Shuffle Once icon +71 appears onscreen and a track is selected in
random sequence and played back. Playback stops once all the tracks in
your player are played back once.
To shuffle a folder once
Scroll Select the Shuffle Folder icon.
The Shuffle Folder icon pg appears onscreen and all tracks in the
folder are selected at random and played back. Playback stops once all
the tracks in the folder are played back once.
Using Your Player 4-9
Playing a track
once
2. Scroll Select the Play Mode icon. A list appears.
3. Scroll Select the Track Once icon (Figure 4-10).
7X FM
To Shuffle Repeat all tracks continuously
Scroll Select the Shuffle Repeat icon.
The Shuffle Repeat icon œp appears onscreen. Tracks are in random
sequence and played back continuously until you stop playback.
When the Track Once Play Mode is enabled, playback stops once the
current track ends.
1. Press the Scroller.
The Main Menu (Figure 4-9) appears.
Track Once
The Track Once icon *4 appears onscreen.
Playback stops once the track ends. Figure 4-10
Using Your Player 4-10
Normal mode
Listening to FM
Radio
\/
If there are no saved
preset channels in your
player, the "No preset
found" message will
appear on the screen.
7X FM
Once the "Normal" mode is enabled, each track is played back, from the first
track to the last.
1. Press the Scroller.
The Main Menu (Figure 4-11) appears.
Figure 4-11
2. Scroll Select the Play Mode icon. A list appears.
TE
3. Scroll Select the Normal icon (Figure 4-12). All ae" Si eee
tracks play back normally. Normal
Figure 4-12
With MuVo TX FM, you can listen to your favorite radio station. Your player
can automatically scan for stations available in your region, and store the
stations as presets for you. In FM Radio mode, your player will display the
current radio channel and its preset number.
FM radio channel
FM tuning status
eo så 104,44 stereo E
Ga Preset |
Preset number
Figure 4-13
To change the FM region
Perform these steps first wnen scanning for stations for the first time.
Using Your Player 4-11
3.
4.
Press the Scroller.
The Main Menu (Figure 4-14) appears.
Scroll Select the Settings icon (Figure 4-15).
A list appears.
Scroll Select the FM Region icon (Figure 4-
16). A list appears.
Scroll Select the region that you are in.
To perform an autoscan and autosave
1.
Press the Scroller.
The Main Menu similar to Figure 4-17
appears.
scroll Select the FM Radio icon (Figure 4-18).
A radio frequency appears on the LCD screen
(Figure 4-19).
Press the Scroller.
Figure 4-14
er
Settings
Figure 4-15
Fr Radio
Figure 4-18
FM 104.44 stereo E
ga Preset |
Figure 4-19
Using Your Player 4-12
4. Scroll Select the Autoscan icon (Figure 4-20).
The player scans and stores channels it
detects. At the end of the autoscan, it plays
the first channel.
To select a channel
1. Press the Scroller.
The Main Menu similar to Figure 4-21
appears.
2. Scroll Select the FM Radio icon (Figure 4-22).
Å radio frequency appears on the LCD screen
(Figure 4-23).
If you do not see a 3. Turn the Scroller to select the preset channel
preset channel, press you want.
the Play/Pause
button. To set a preset channel
1. Press the Scroller.
The Main Menu similar to Figure 4-24
appears.
2. Scroll Select the FM Radio icon (Figure 4-25).
Å radio frequency appears on the LCD screen
(Figure 4-26).
FM Radio
Figure 4-22
FM 104. Ads E
cs Preset |
Figure 4-23
FM Radio
Figure 4-25
Using Your Player 4-13
v/
~ DÅ
-
4
Turn the Scroller
towards the right Pr
to increase the
frequency or towards
the left #4 to
decrease the
frequency.
\/
If you do not see a
preset channel, press
the Play/Pause
button.
8.
If you see a preset channel, press the Play/
Pause button to switch to Manual Scan
view. The preset channel disappears.
To scan for a channel, move the Scroller
towards the right or left, and hold for one
second.
Press the Scroller.
scroll Select the Save Preset icon (Figure 4-
27).
Turn the Scroller to select the preset number
you want. Your channel is stored and appears
at the bottom-left corner of your screen.
Repeat steps 2 to 6 to store another channel.
To delete a preset channel
1.
Press the Scroller.
The Main Menu similar to Figure 4-28
appears.
scroll Select the FM Radio icon (Figure 4-29).
A radio frequency appears on the LCD screen
(Figure 4-30).
Turn the Scroller to select the preset channel
you want.
Press the Scroller.
7X FM
im:
PM AAA een E
Ga Preset |
Figure 4-26
Figure 4-27
Fr Radio
Figure 4-29
FM 104.44 stereo å
ca Preset |
Figure 4-30
Using Your Player 4-14
5. Scroll Select the Delete Preset icon (Figure
4-31).
Delete Prete
Figure 4-31
6. Scroll Select the Delete Preset x icon (Figure —_
4-32). The preset channel is deleted and your me
MuVo TX FM plays the next available preset Delete Preset 4
channel. Figure 4-32
To switch to FM Preset view or Manual Scan
view
In FM Preset view, you can see the preset channels and scroll from one
preset channel to another. If you need to fine-tune the radio channel, switch
to Manual Scan view.
1. Press the Scroller.
The Main Menu similar to Figure 4-33
appears.
2. Scroll Select the FM Radio icon (Figure 4-34).
A radio frequency appears on the LCD screen
(Figure 4-35). FM Radio
Figure 4-34
3. Press the Scroller. im
FM da stra E
Ga Preset |
Figure 4-35
Using Your Player 4-15
4. Scroll Select the Scroller mode icon (Figure
4-36) to switch to the different views.
Alternatively, you can press the Play/Pause Scroller Mod
button to switch to the different views Figure 4-36
while playing a station.
Using Your Player 4-16
Voice
Recording
Making a voice
recording
You cannot pause
and continue a voice
recording.
7X FM
Another great MuVo TX FM feature is its ability to record voice and FM radio.
Recorded voice is encoded directly into IMA ADPCM (at 8 kHz, 4-bit, Mono)
file format and recorded FM radio is encoded directly into IMA ADPCM (at 16
KHz, 4-bit, Stereo) file format.
When recording, note that the available recording time is determined by:
O available space in your player
O battery power remaining in your player
When recording, you will see the time available for recording. You will also
see a bar showing you the elapsed recording time.
ganges meets — 000010 =
8 9:59:57 Remaining Time Available
For Recording
To make a voice recording
1. Press the Scroller.
Scroll Select the Microphone icon (Figure 4-37).
The recording bar appears onscreen. Microphone
Figure 4-37
2. Press the Play/Pause button to start the
recording.
3. Press the Play/Pause button again to end the recording. A name
is automatically assigned to your recording and it is saved in your player.
The naming convention used is: VOC [Current File Number].
Using Your Player 4-17
Recording FM
Radio
\/
~ Z
-
4
`
You cannot pause
and continue a FM
radio recording.
\/
If you do not see a
preset channel, press
the Play/Pause
button.
7X FM
When recording FM radio, you will see one bar showing you the time
available for recording, and another showing you the elapsed recording time.
Also the FM Radio icon appears in the bottom-left corner of the LCD screen.
Elapsed recordin
time
Play status icon alli]: ni: 10) (ua,
FM Radio mode PT m [19:59:50 —
Figure 4-38
To make an FM radio recording
1.
Press the Scroller.
The Main Menu similar to Figure 4-39
appears.
Scroll Select the FM Radio icon (Figure 4-40).
Å radio frequency appears on the LCD screen
(Figure 4-41).
Turn the Scroller to select the preset channel
you want.
Press the Scroller.
Battery level
indicator
Remaining time available
for recording
Fr Radio
Figure 4-40
FM 04. Ads E
æi Preset |
Figure 4-41
Using Your Player 4-18
Playing
Recordings
5. Scroll Select the FM Recording icon (Figure
4-42).
Å recording bar appears on the LCD screen Fr
and recording starts. Figure 4-42
6. Press the Play/Pause button to end the
recording. Å name is automatically assigned to your FM radio recording
and the file is saved in your player. The naming convention typically
used is: FM [Current File Number].
To play voice and FM Radio tracks that you have recorded on your player,
see "Playing Recordings" on page 4-19.
It is simple to play back the voice and FM Radio tracks you have recorded. In
Recordings mode, your player will display the elapsed time, track number
and file name of the recorded track.
Play mode
icon
Elapsed time og [—— Battery level
Em indicator
Play status icon HL: nil: 10) rr Lock
Recordings mode Chi. WAL Current playing track
name
Figure 4-43
Using Your Player 4-19
\/
A recorded voice file
name starts with
"VOC" and an FM
radio file name starts
with "FM".
To play a recording
1. Press the Scroller.
The Main Menu similar to Figure 4-44
appears.
2. Scroll Select the Recordings icon (Figure 4-
45).
3. Scroll Select a recording you want to listen to. Recordings
The track is played back automatically. Figure 4-45
To delete a recording, see "Deleting Tracks" on page 4-23.
Using Your Player 4-20
EQ Settings
Enhancing Your
Music
7X FM
Your player allows you to enhance your listening experience with EQ
settings. EQ settings available in your player include:
Normal
Rock
Pop
Classical
Jazz
Custom EQ
OOOO O 0
You can use EQ settings while audio is being played back. This process is
described in the following instructions.
1. Press the Scroller. The Main Menu (Figure 4-46)
appears.
Figure 4-46
2. Scroll Select the EQ icon (Figure 4-47). —_
<> EY] in
EG
Figure 4-47
Using Your Player 4-21
TX FM
Depending on which EQ setting you want, follow the corresponding step:
To select Normal, Rock, Pop, Classical or Jazz
Scroll Select the EQ setting you want.
The selected EQ setting icon appears onscreen.
To define your own EQ settings
1.
2.
Scroll Select the Custom EQ icon. The Custom
EQ screen (Figure 4-48) appears.
Five vertical control levers appears in the display. 1. |
Each lever represents successively higher Figure 4-48
frequencies that can be controlled. 62 Hz controls
bass frequency, 250 Hz adjusts the low mid-range frequency, 1 kHz
adjusts the mid-range frequency, 4 kHz adjusts the upper mid-range
frequency and 16 kHz adjusts the treble frequency.
Scroll Select each vertical control level. Use the Scroller to move the
control knob up or down to vary the amount of boost or reduction in the
selected frequency range.
4. Scroll Select the check mark to exit the Custom EQ window.
Using Your Player 4-22
Skipping
Folders
Your player can only
recognize up to one
sub folder level in
the root directory.
Deleting
Tracks
This action skips the playback to a selected folder.
To skip to the next folder
1. Press the Scroller.
2. Scroll Select the Skip Folder icon (Figure 4-49).
3. Scroll to the folder that you want to skip to.
4.
To resume normal playback, press the Scroller
again. Figure 4-49
This action permanently deletes tracks from your MuVo TX FM.
To delete a track
1. In Music mode, select the track that you want to delete.
2. Press the Scroller.
3. Scroll Select the Delete icon (Figure 4-50). A li =
appears. rr AIG) FT] fri
k. Delete a
Figure 4-50
4. Scroll Select the Delete icon (Figure 4-51). The
track's name appears onscreen and the track is
permanently deleted from your player.
Figure 4-51
Using Your Player 4-23
User
Preferences
wi
These features are
only available in
Music Mode and
Voice Mode.
7X FM
Your player offers many configuration options. You can:
OOO OO QQ
N =
Change the LCD orientation
Specify contrast settings
Change the LCD screen's backlight duration
Specify idle time duration before the player automatically shuts down
Select the default language
Access the information screen
Select the FM region
Press the Scroller.
scroll Select the Settings icon (Figure 4-52).
A list appears (Figure 4-53). fa) [Tt] fri
4 Settings 3
Figure 4-52
Figure 4-53
Using Your Player 4-24
Rotating the LCD
screen
7X FM
MuVo TX FM has a handy feature: you can rotate the LCD screen by 180
degress. This may be useful for left-handed users. Follow the step below to
rotate the LCD on your player.
To rotate the LCD screen 180 degrees
Using your left hand Using your right hand
Scroll Select the LCD Orientation icon aes. I/SNWW JO PUNOSS
The LCD screen rotates 180 degrees (Figure 4-54). ml OT: ODODO
Figure 4-54
Using Your Player 4-25
To set the contrast level for your player's screen
1. Scroll Select the Contrast icon. The Contrast
screen (Figure 4-55) appears.
2. Use the Scroller to increase or decrease the LCD
contrast. The lower the number, the lower the LCD Figure 4-55
contrast.
To adjust the screen backlight duration
1. Scroll Select the Backlight icon.
2. Scroll Select the backlight duration or disable it. A lower number setting
conserves battery power for longer playback time.
To specify how long the player remains inactive before it
automatically shuts down
1. Scroll Select the Idle Shutdown icon.
2. Scroll Select the duration you want the player to wait before
automatically shutting down.
To change the default language
1. Scroll Select the Language icon.
2. Scroll Select the language that you want.
To view firmware version, total storage space, remaining available
space and track count
1. Scroll Select the Information icon.
Using Your Player 4-26
Locking and
unlocking your
Player
7X FM
Locking your MuVo TX FM will disable all buttons except the scroller on the
player. This feature is useful when you do not want any buttons (for example,
Pause) pressed accidentally.
If you press a button while the player is locked, a popup window appears,
prompting you to unlock the player. This popup is only displayed for five
seconds.
To lock your player
1. Press the Scroller.
2. Scroll Select the Lock icon (Figure 4-56). The
player is locked.
To unlock your player
1. Press any button. A popup appears (Figure 4-57).
2. Scroll Select the Unlock icon. The player is
unlocked.
Figure 4-57
Using Your Player 4-27
Formatting
Your Player
Wi
DING
-
å \
À
Windows 98 SE users
must install the MuVo
TX FM drivers before
formatting the player.
For more information
on driver installation,
see "Installing
Drivers and Software"
on page 2-3".
\/
~ PA
-
4
`
Windows 2000 and
Windows XP users
must select the FAT
file system only in the
Format F:\ dialog box
before formatting the
player.
7X FM
If you need to format your player, first backup the files on your player to your
computer. When you format your player, all songs and files will be deleted.
By default, your player is already formatted.
1. Connect your player to your computer's USB port.
2. Launch Windows Explorer on your computer. Your player is recognized
as a Removable Disk in Windows Explorer.
3. Right-click the Removable Disk icon and click the Format option.
The Format fil dialog box appears (replace f:\ with the drive letter of
your player).
4. Follow the onscreen instructions to format your player.
£ Desktop
8 My Computer
Heg 34 Floppy å] |
Sharing...
Hæ (C:] Eject
= (D)
7 ® E: Paste
=) Geel) Properties
Figure 4-58
5. After the formatting is complete, make sure you stop your player before
disconnecting it from your computer. See "Usage" on page C-3 for
instructions on stopping your player.
For more information about using Windows Explorer, refer to its online Help.
Using Your Player 4-28
CREATIVE
A Technical Specifications
7X FM
Technical Specifications
Size
Weight
Capacity
Battery type
Battery Life
(playback time)
Playback Formats
Recording Formats
Signal to Noise
Ratio
Oo
O OO OOO OU
36.7 mm (L) x 74.0 mm (H) x 16.0 mm (W)
32 g (without the battery) or 43 g (with a AAA battery)
128, 256 or 512 MB built-in memory
One Alkaline AAA size battery
MP3 128 kbps, up to 15 hours of continuous playback from new AAA alkaline batteries.
WMA 64 kbps, up to 11 hours of continuous playback from new AAA alkaline batteries.
The following may reduce the playback time:
e skipping, fast forward or reverse during playback
e using passive speakers or high-power headphones
e long backlight timeout setting (more than 10 secs)
e playback of .WMA files with a high bitrate and/or heavy bass
FM radio, up to 12 hours of continuous playtime from new AAA alkaline batteries.
MP3 (at 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and 48 kHz)
WMA (at 8, 11.025, 16, 22.05, 32, 44.1 and 48 kHz)
WMA with Digital Rights Management (at 16, 22.05, 24, 32 and 44.1 kHz)
Voice: IMA ADPCM (at 8 kHz, 4-bit, Mono)
FM Radio: IMA ADPCM (at 16 kHz, 4-bit, Stereo)
Up to 90 dB
Technical Specifications A-1
Channel
Separation
Frequency
Response
Harmonic
Distortion
Operating System/
Firmware
Headphone Out
LCD Display
Data Connector
Firmware Support
Oo
Up to 63 dB
20 Hz~20000 Hz
<0.05%
Upgradeable via Internet
1/8" stereo minijack, 5~7 mW
Large 96 x 32 pixel, blue EL backlit display
USB 1.1
USB 2.0
Programmable
* Firmware upgrades are available from www.creative.com
7X FM
Technical Specifications A-2
CREATIVE
Onscreen Diagram and Icon
Guide
7X FM
Onscreen Diagram and Icon Guide
Information
Diagram Action/Meaning
Diagrams
G+ = O your player is connected to your computer. To
EF ol use your player, disconnect it from your
computer.
“St | |
Fr Al re; O files are being transferred to your player.
Onscreen Diagram and Icon Guide B-1
Playback Icons
lå
DI
på
å \
À
The following icons
appear onscreen when
the associated
playback action is
used.
Icon
7X FM
Action/Meaning
Play
Pause
Stop
Forward
Reverse
Skip forward
Skip back
Onscreen Diagram and Icon Guide B-2
Play Mode
Icons
Icon
TX FM
Action/Meaning
Repeat Track
Repeat Folder
Repeat All
Shuffle Once
Shuffle Repeat
Shuffle Folder
Track Once
Repeats a selected
section of a track
Onscreen Diagram and Icon Guide B-3
Error Diagrams
Unrecoverable
error!
File syster
eOr
O
O
Likely Causes
physical defects
numerous high-
impact shocks
unexpected power
loss while saving
settings
player is unable to
perform the selected
task (for example,
deleting a file)
unsupported file
system
corrupted file system
7X FM
If an error occurs, you may see the following diagram, indicating the general
nature of the problem.
Diagram
Suggested Action
call Technical Support
download a newer
firmware version
reload firmware
call Technical Support
clear your player's
memory
call Technical Support
check that the file
system you have
selected during
formatting is FAT only
use ScanDisk to check
your player
Onscreen Diagram and Icon Guide B-4
7X FM
Diagram Likely Causes Suggested Action
ÅN O check that the file you
[AN unsupported omme O unsupported file are trying to play back is
VOC.000001.WAV
format a .WMA, .MP3 or
recorded voice file
O the player's low
No free space remaining storage
space is depleted; O delete some files
recording cannot
proceed
q 5 O battery is depleted,
player cannot start O insert a new battery
Up
Onscreen Diagram and Icon Guide B-5
Frequently Asked Questions and
Troubleshooting
7X FM
FAQs and Troubleshooting
AutoPlay
What do I do when the installation does not start automatically after the
Installation CD is inserted?
The AutoPlay feature in your Windows system may not be enabled.
To start the installation program through the My Computer
shortcut menu
1. On your Windows desktop, double-click the My Computer icon.
2. Right-click the CD-ROM drive icon, and then click AutoPlay.
3. Follow the onscreen instructions.
To enable AutoPlay through Auto Insert Notification
1. Click Start -> Settings -> Control Panel.
2. Double-click the System icon. The System Properties dialog box
appears.
Click the Device Manager tab and select your CD-ROM drive.
Click the Properties button.
Click the Settings tab, and then select Auto Insert Notification.
Click the OK button.
To start the installation program through Windows Explorer
1. in Windows Explorer, search and locate the d:\ctrun folder (replace d:\
with the drive letter of your CD-ROM drive).
2. Double-click the ctrun.exe file.
2 gi S w
FAQs and Troubleshooting C-1
General
Usage
7X FM
Where can I get official information on all MuVo products?
Visit www.creative.com for updates and downloads relating to all MuVo
products, Creative's MP3 players and accessories.
After playing a sequence of tracks, the player skips a track.
The player will only play valid formats (.MP3, .WMA or .WAV recordings).
Other types of files will be skipped.
Files/tracks are corrupted when transferred to the player.
Transfer may have been interrupted. Before disconnecting your player from
your computer, make sure that you stop your player properly first.
To stop your player in Windows XP, WIndows 2000 or Windows Me
P Click the Safely Remove Hardware icon % on the Taskbar, click Safely
remove USB Mass Storage Device, and disconnect your player when you
are prompted to do so.
Safely remove USB Mass Storage Device - DrivelE: k
W @) 12:05 PM
To stop your player in Windows 98 SE
» Make sure that the icon below appears on the LCD screen again for at least
five seconds before disconnecting your player.
sit
Fe?
FAQs and Troubleshooting C-2
Digital Rights
Management
TX FM
The player turns off immediately after it is turned on.
Do one or more of the following:
O format your player. For more information, refer to "Formatting Your Player" on
page 4-28.
O use fresh batteries if batteries used are depleted.
Can I use the MuVo TX FM for portable data storage?
Yes, you can.
I have to change the battery quite often. Is there anything I can do to
make it last longer?
Some operations consume more battery power:
O along backlight timeout setting. Å shorter timeout conserves battery power.
O a high contrast setting. Position the player so that you can read the display
without using a high contrast setting.
too much use of fast forward/reverse.
turning the player on/off too many times.
use of passive speakers or high-powered headphones.
playback of .WMA files
Can I play DRM-protected WMA files on my MuVo TX FM?
Yes.
FAQs and Troubleshooting C-3