Document text
AM/FM/NOAA WEATHER BAND RADIO
USER MANUAL
MR-750
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE
DEAR JENSEN® CUSTOMER
Selecting fine audio equipment such as the unit you've just purchased is
only the start of your musical enjoyment. Now it's time to consider how you
can maximize the fun and excitement your equipment offers. This
manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without
affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to
higher volumes of sound. So what sounds "normal" can actually be loud
and harmful to your hearing.Guard against this by setting your equipment
at a safe level BEFORE your hearing adapts.
To establish a safe level:
e Start your volume control at a low setting.
e Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion
Once you have established a comfortable sound level:
è Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or
loss in the future. After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable
until it is too late, this manufacturer and the Electronic Industries
Association's Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise.
Customer's Record:
The serial number of this product is found on its bottom cover. You should
note the serial number of this unit in the space provided as a permanent
record of your purchase to aid in identification in the event of theft of loss.
Model Number: MR-750 Serial Number:
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety
and operating instructions carefully before installation and use, and keep
these instructions handy for future reference. Take special note of all
warnings listed in these instructions and on the unit.
1. Read these instructions —All the safety and operating instructions
should be read before the appliance is operated.
2. Keep these instructions — The safety and operating instructions should
be kept for future reference.
3. Heed all warnings — All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions — All operation and use instructions should be
followed
5. Do not use this apparatus near water — The appliance should not be
used near water; for example, near a bath tub, washbowl, kitchen sink,
laundry tub, ina wet basement, or near a swimming pool.
6. Clean only with dry cloth — The appliance should be clean6d only as
recommended by the manufacturer.
7.Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
. Only use attachments / accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
10. This appliance shall not be exposed to dripping or splashing water and
that no object filled with liquids such as vases shall be placed on the
apparatus.
11. Power Sources — The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on
the appliance. Do not overload wall outlet.
12. Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
13. Do not attempt to dismantle, open or repair this product yourself. If a
fault occurs, seek advice from your local qualified service technician or
contact the distributor via the telephone number at the back of this
instruction manual.
14. Caution marking and nameplate are located on bottom of product.
2
œ
COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
e Reorient or relocate the receiving antenna.
e Increase the separation between the equipment and receiver.
e Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
e Consult the dealer or an experienced radio/TV technician for help
CAUTION:Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
SPECIAL NOTE
To prevent any scratching or damage to your furniture, we strongly
recommend that you purchase small self-adhesive felt pads, available at
hardware stores and home improvement centers everywhere, and apply
these pads to the bottom of the unit before you place the product on any
fine wooden furniture.
LOCATION OF CONTROLS
000 ©
z
i
C
Gd)
00000 @
. Flashlight ON/OFF button
. Clock/Radio Tune Up A button
. LCD Display
. Volume Up (+) button
. Solar Panel
. LED Flashlight
. Power On/Standby (l) button
. Clock/Radio Tune Down® button
9. Volume Down (-) Button
10. Radio Mode selection/Clock Set button
11. Weather Alert Indicator
12. Speaker
oo NOO FWNM =
DO © OB
13. Telescopic Antenna
14. Metal Hook
15. Battery Compartment
16. Rubber Dust Cover
17. Mini USB DC Input Port (located under the Rubber Dust Cover)
18. Charging Indicator (located under the Rubber Dust Cover)
19. USB Charging Port (located under the Rubber Dust Cover)
20. Headphone Jack (located under the Rubber Dust Cover)
21. Power Source Selector (located under the Rubber Dust Cover)
22. Reset button (located under the Rubber Dust Cover)
23. Crank Handle
POWER SOURCE
This radio is designed to operate on multiple power sources.
MPORTANT: If you pull the insulation tab out to activate the internal
rechargeable battery and the display does not turn on or the display comes
on, but the radio and flashlight do not work, you will need to reset the unit
using the following procedures.
1. Press the RESET button on the back and the MR-750 should return to
normal operation. Please see “Resetting the Unit” under CARE AND
MAINTENANCE section of this manual.
2. If low battery icon ©} appears on the display, fully recharge the internal
rechargeable battery or use fresh “AAA” batteries.
5
A) FOUR WAYS TO POWER THE UNIT
1) “DYNAMO” POWER OPERATION
1.A3.7V DC rechargeable lithium battery is included with MR-750. When
first time using the unit, open the battery compartment and insert the
rechargeable battery according to the polarity shows inside the compartment.
2. Close the Battery Door.
3. Set the Power Source Selector to the “Li-ion Battery” position
4. Lift the Crank Handle outward until it is fully extended. Rotate the
Crank clockwise as shown below. The CHARGING Indicator will light.
Hand Crank
. Continue turning the Crank to generate electricity to charge the battery.
More power is generated the longer you turn the crank handle, and the
Radio listening time will be extended (Radio reception only).
Note: It may require up to 5 - 6 minutes of cranking if the battery is completely
drained and the LCD clock display and LED light do not work. You may need to
press the reset button if lithium battery is charged up by cranking but radio or
LED light does not work.
6. Press the Power On/Standby (!) button to turn on the unit for operation.
Lithium Battery Safety Instructions
UN Do not burn or bury batteries. Do not puncture or crush. Do not
disassemble. Recycle Lithium batteries. Do not dispose of in the
trash.
If the electrolyte in the cells should get on your skin, thoroughly wash with
soap and water. If in the eyes, rinse thoroughly with cool water.
Immediately seek medical attention.
Use only chargers rated for Lithium cells. Be sure the charger's voltage and
current settings are correct for the battery pack being charged.
Charge batteries on a fireproof surface away from flammable items or liquids.
Batteries should NEVER be left unattended while charging. Only adults
should charge the batteries.
Follow the manufacturer's instructions for charging the product and do not
charge longer than recommended. Unplug the charger when the battery is
charged.
a
6
Recycle Rechargeable Batteries
Recycle your old rechargeable batteries at one of the
many collection sites in the U.S. and Canada. To find the
site nearest you, visit www.call2recycle.org or call
toll-free 1-877-2-RECYCLE.
2) Dry cell Battery Operation
1. Open the Battery Door on the back of the radio.
2. Following the polarity diagrams shown in the battery compartment,
insert 3 'AAA' (UM-4) batteries (Not included) and close the battery
door.
Note: For optimum performance, alkaline-type batteries are recommended.
. Open the Rubber Dust Cover located on the back of the unit and set the
Power Source Selector to “AAA Battery” position.
4. When "AAA" batteries are installed, the power of the build-in
rechargeable battery pack will be cut off after setting the Power Source
Selector to “AAA Battery” position |g] .
wo
Note: When switching the power source from internal lithium battery to the
“AAA"batteries, please make sure the unit is OFF and in standby mode. You
may encounter problems in operation and will need to reset the unit if you
switch the power source while the MR-750 is operating.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong
polarity may damage the unit.
WARNING:
e Be sure that the batteries are installed correctly. Wrong polarity may
damage the unit.
Do not mix old and new batteries.
è Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
Only batteries of the same or equivalent type as recommend are to be
used.
e If the unit is not to be used for an extended period of time, remove the
battery. Any old or leaking battery can cause damage to the unit and
may void the warranty.
e Do not dispose of batteries in fire, batteries may explode or leak.
Do not try to recharge batteries not intended to be recharged; they can
overheat, rupture and leak(Follow battery manufacturer's directions).
SOLAR POWER
1. Set the Power Source Selector to "Li-ion Battery” position [È] .
7
2. Put the unit in direct sunlight, making sure the solar panel of the unit is
facing towards the sun. If the sunlight is strong enough, the charging
Indicator will light indicating the unit is charging. More power is
generated the longer you leave the unit in direct sunlight, and the
Radio listening time will be extended (Radio reception only).
Note: If the battery is completely drained (LCD clock display and LED
light do not work), it may require very long exposure to direct sunlight
in order to charge the battery using the solar panel. You should use one
of the other power modes available if you need to use the radio
immediately.
4) USB Power
The unit has a mini USB jack on the back of the unit under the Rubber
Dust Cover.
1. Use the mini USB plug side of a5V DC, 500mA output AC adaptor
(not included), and connect it to the USB port on the back of the unit.
2. Set the Power Source Selector to "Li-ion Battery" position [iJand plug
the AC adaptor into an 120V AC, 60Hz household outlet.
Note: The USB power adaptor (not included) described above is the same
type commonly used with smartphones. A USB to mini USB cord
(not included) is also required for charging the unit via the mini USB jack
located on the back of the unit.
LOW BATTERY INDICATOR
When using battery power to operate this unit and the battery power
becomes weak, the low battery icon Ca will appear & flashing on LCD
display. You are recommended to charge the rechargeable battery or
replace the exhausted dry cell batteries immediately.
CLOCK SETTING
When the unit is in standby mode:
Setting 12/24 Hour format
1. Press and hold the MODE button for 2 seconds to enter clock setting
mode, 12 hour format (12 Hr) flashing.
2. Tap the TUNE4/¥ button to select 12 hour (12Hr) or 24 hour (24Hr)
format, then press MODE button to confirm. Hour digits flashing to
prompt for input.
Setting Clock
3. Tap the TUNE 4/¥W button repeatedly to set the hour value. Press and
hold the buttons to speed up the forward or reverse scanning of the digits.
Note: Make sure the hour is set so that the AM or PM indicators are
displayed correctly.
4. Press the MODE button after the hour is set, Minute digits flashing to
prompt for input.
5. Tap the TUNE a/w button repeatedly to set the minute value. Press and
hold the buttons to speed up the forward or reverse scanning of the digits.
6. Press the MODE button again to finish clock setting.
Note: If the unit was reset or if you are charging a completely dead
battery, you need to set the clock again.
LISTENING TO THE RADIO
1. Press the Ù) button to turn on the unit, LCD backlight turns on.
2. Tap the MODE button to select AM/FM/Weather band in below
sequence. The radio indicator displays.
FM — AM — WB — WBAlert
to
3. To manually tune to a desired station, repeatedly tap the TUNE a/v
button.
4. To automatically search for stations with strong signals, press and hold
the TUNE a/v button until the frequency digits on display begins to
scan then release the button. The tuner will stop on the first strong
signal it finds.
5. Press VOLUME +/ - button to obtain the desired sound level.
6. Press the Ù) button on main unit to turn unit into standby mode after
listenning. The LCD backlight will automatically turns off after 20
seconds approximate.
Notes:
e Manual tune to select weaker stations that might be skipped during
automatic tuning.
e If the automatic tuning does not stop on the exact frequency of the
station, for example, it stops on 88.9 MHz instead of 88.8 MHz, use the
manual tuning method to "fine tune" to the exact frequency of the
desired station.
è In power on mode, the LCD backlight will automatically turn off for power
saving if no buttons are pressed within a 20 seconds period of time.
HINTS FOR BEST RECEPTION:
e The AM antenna is located inside the cabinet of the unit. If AM reception
is weak, change the position of unit until the internal antenna picks up
the strongest signal.
e To insure maximum FM tuner reception, the Telescopic Antenna should
be fully extended and rotated to obtain the best possible station reception.
9
LISTENING TO A WEATHER CHANNEL
1) Weather Band
1. Press the Ù button to turn on the unit.
2. Tap the MODE button to select weather band until "WB" icon appears
steadily on display.
3. Tap the TUNE 4/¥ button to select your local weather broadcasting.
4. Press the VOLUME +/- button to obtain the desired sound level.
5. To turn the radio off, press the () button.
Weather Band Channel Frequency Table
CHANNEL FREQUENCY(MHz)
CH1 162.400
CH2 162.425
CH3 162.450
CH4 162.475
CH5 162.500
CH6 162.525
CH7 162.550
Note: With regard to the NOAA Weather Band: You need to identify which
band receives your local weather band report. When you change locations
either to another city or state, you may need to choose a different band to
get the local report in that location.
HINTS FOR BEST RECEPTION:
To insure maximum weather band reception, the Telescopic Antenna
should be fully extended and rotated to obtain the best possible station
reception.
2) RECEIVING AN EMERGENCY WEATHER ALERT
The Weather Alert function allows you to set the weather radio to a standby
mode that will turn the radio on automatically if there is a severe weather
emergency in your area. To receive emergency weather alert warnings,
turn the unit on, tune to the strongest local NOAA weather channel, adjust
the volume to a level that you will hear when an alert is received. The radio
remains silent until an “alert” broadcast occurs.
1. Tap the MODE button to select weather band until “WB” appears on
display steadily.
2. Tap the TUNE 4/¥ button to select your local weather station.
3. Tap the MODE button again to enter weather alert standby mode, WB
icon will be flashing. Unit will go on automatically when there is an alert
from the National Weather Service.
10
4. Tap the MODE button to turn off the NOAAAlert by switch it to other
mode. It is recommended to use the AC adaptor to power the radio when
you turn on the NOAA Alert.
Note:
1.) The radio will continue to drain the battery if it's left in Weather Standby
Mode, so it is highly recommended that you use a USB power adaptor
(not included) to prevent the battery from completely draining and turning
the radio off while in use. See the "USB POWER" section above for more
information on the USB charger.
2.) NOAA Weather band is a service broadcast of the U.S.Government
and available in all 50 states, Puerto Rico and the U.S. Virgin Islands.
3.) The NOAA Weather Service broadcasts a test alert every Wednesday
between 11 am and Noon. To receive the broadcasts, the radio must
be within the range of the local broadcast site, 10 - 40 miles,
depending on terrain and obstructions.
To learn more:
Click on http://www.nws.noaa.gov/nwr/ for NOAA (National Oceanic &
Atmospheric Administration) and http://www.ec.gc.ca/ for Environment
Canada.
CHARGING THE INTERNAL BATTERY
DYNAMO CHARGING
1. Correctly install the rechargeable Lithium battery included
2. Set the Power Source Selector to "Li-ion Battery" position
ith the radio.
3. When you turn the hand crank, the built-in dynamo will start to generate
electricity. The unit will charge the Lithium battery automatically as long
as you turn the hand crank.
4. While charging, the RED Charging LED on the back of the unit will be on.
The brightness of LED lights shows the charging intensity of the battery
power.
NOTE: While the intensity of the battery power is limited, when the low
battery indicator on LCD display turns On, the rechargeable Lithium battery
are low, you can turn the hand crank to generate electricity for emergency.
COMPUTER USB CHARGING
1. Correctly install the rechargeable Lithium battery included with the radio.
2. Set the Power Source Selector to "Li-ion Battery" position
3. Open the Rubber Dust Cover and use a standard USB to mini i USB cable
(not included), plug one end with USB into the computer USB port. Plug
the other end with mini USB into mini USB jack of the unit. It will start to
charge the Lithium battery automatically when your computer is ON.
11
4. While charging, the red Charging LED on back of the unit will be on. It will
turn to green when the battery is fully charged.
Note:
1.) Before the first use, we recommend you charge the Lithium battery for
5-6 hours. Please do not charge the battery longer than recommendation
as it will shorten the battery life.
2.) The radio should not be used while charging with your computer.
SOLAR CHARGING
The solar panel is located on the top of the unit. Reposition the unit towards
the sun for optimal charging if necessary.
1. Set the Power Source Selector to "Li-ion Battery" position [gz] .
2. Put the unit in direct sunlight and the unit will begin charging the internal
rechargeable battery automatically.
3. While charging, the Charging indicator on the back of the unit will be on.
Solar Panel
NOTE: The unit can only be charged using outdoor sunlight. Indoor incandescent
lights and lamps are not strong enough to charge the rechargeable battery properly.
CHARGING YOUR SMART PHONE OR PORTABLE DEVICE
This unit features a USB port for charging your portable device
(iPod, iPhone, Android phone, etc.)when used with the USB charging cord
that came with your device.
1. Fully charge the built-in rechargeable lithium battery prior to attaching the device
to be charged.
2. Open the Rubber Dust Cover and set the Power Source Selector to the “Li-ion
Battery” position
Note: You can also charge your portable device with the Power Source Selector in
the “AAA Battery” position [s| . This charging method uses the 3 "AAA" batteries
installed in the MR-750. The 3 "AAA" batteries may discharge rather quickly, so it
should only be used in emergency situations and when the internal Li-ion Battery is
dead.
3. Plug one end of the USB cable (not included) into the USB port located on the back
of the MR-750. Plug the other end of the cord into the device you wish to charge.
12
4. Observe the battery charge indicator on your device and the charging will start
immediately.
5. It is recommended that you fully charge the internal Li-ion battery prior to
attempting to charge a mobile device with the USB port. The USB port is only
capable of delivering the amount of power that is left in the internal Li-ion battery.
6. Unplug the cable when your device is charged or when the internal Li-ion battery
of the MR-750 is drained.
CAUTION:
Before charging, please refer to the user manual of the device you wish to
charge to make sure the charging current required does not exceed 1Amp
(1,000 mA) of charging current. Overloading the charge circuit may damage
the MR-750 and void the warranty.
Note:
1.) Some smart phones and portable devices use proprietary USB
connections and circuitry, so they may not charge when plugged into
the USB port. Please refer to your device user manual before you
attempt to charge them.
2.) Itis normal for the MR-750 to be warm while the USB port is in use and
charging your smart phone or portable device.
3.) The unit will switch to standby mode automatically and the Power
On/Standby will not function during charging.
4.) After you remove the external device you attached to MR-750 for
charging, wait for 10 — 15 seconds before powering on the unit .
5.) In some cases, the internal battery may not fully charge your portable
device. It's recommended that if you start to get intermittent charge
indications, unplug the device and fully recharge the internal battery
of the MR-750 before attempting to charge your portable device again.
See the "Charging the Internal Battery" section above for for more
information.
CHARGING/NOAA ALERT LED INDICATOR
Back LED
Battery Charging via USB
e LED lights Red during charging.
e LED lights Green when fully charged.
Battery Charging via Crank
e LED lights Red during charging.
Battery Charging via Solar
e LED lights Red during charging (Must be outdoors and under
strong/direct sunlight)
Front LED
NOAA Alert mode
e LED flashes when a weather alert signal is detected
13
USING THE FLASHLIGHT
An LED flashlight is built into the side of the unit. To use the flashlight, press
the Flashlight button on the top to turn it on. When the flashlight is on, press
the button again to turn it off.
NOTE: When the flashlight is used for extended periods of time and causes
the battery to drain, the flashlight may no longer work even though the display
still shows the time.
USE EARBUDS (NOT INCLUDED)
Inserting the plug of your earbuds into the earbuds jack will enable you to
listen in private. When using earbuds, the speakers will be disconnected.
Read this Important Information before Using Your Earbuds
1.) Avoid extended play at very high volume as it may impair your hearing.
2.) If you experience ringing in your ears, reduce the volume or shut off the unit.
3.) Keep the volume at a reasonable level even if your headset is an open-air
type designed to allow you to hear outside sounds. Please note that
excessively high volume may still block outside sounds.
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never
be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
Resetting the Unit
If the unit experiences a power surge or electric shock, it is possible that the
internal micro-controller may lock up and the unit will not respond to any
commands from the panel controls. In this event, use a straightened paper
clip, toothpick or similar objects to press the RESET button located on the
back of the unit (see the below figure). The reset operation clears the system
memory and all of your previous settings will be erased.
CAUTION: DO NOT USE A SHARP OR POINTED OBJECT TO PRESS
THE RESET BUTTON. IT MAY DAMAGE THE RESET SWITCH INSIDE
ims
THE UNIT.
RESET BUTTON
14
TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this music system please check
the following or call 1-800-777-5331 for Customer Service.
Symptom
Possible Cause
Solution
No/low sound
when power
on the radio
VOLUME control is set
to minimum.
Adjust the VOLUME control.
Station has not been
tuned properly.
FM reception is weak.
Tune the station properly.
Extend and rotate the telescopic
antenna.
AM reception is weak
Relocate the position of the unit.
Unit in Weather Alert
Mode
Select AM, FM or WB mode as
desired.
Power is not
on
The built-in
rechargeable battery is
low and the "AAA"
batteries are exhausted]
Recharge the built-in
rechargeable battery and
replace all 3 "AAA" batteries
with fresh ones.
Unit is charging your
portable device
Wait charging finish or unplug
your potable device from the
unit, wait for 10 — 15 seconds
and then turns the unit power on]
USB no
charging
The built-in
rechargeable battery
is low.
15
Fully recharge the built-in
rechargeable battery before
charging your Potable device.
SPECIFICATION
Power requirement:
DC Input: 3 X AAA (UM-4) Batteries or
Built-in DC 3.7V, 600mAH Li-ion rechargeable battery or
USB Power DC 5V, 500mA (Max.)
Frequency Range
Radio Band FM 87.5 - 108 MHz
AM 520 - 1710 KHz
WX CH1—-7
At Spectra, environmental and social responsibility
SPECTRA’ a core value of our business. We are dedicated to
S continuous implementation of responsible initiatives
a
Yew with an aim to conserve and maintain the
environment through responsible recycling.
Please visit us at http://www.spectraintl.com/green.htm for more
information on Spectra's green initiatives or to find a recycler in your area.
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be
free from defective materials or factory workmanship for a period of 90 days
from the date of original customer purchase and provided the product is utilized
within the U.S.A. This warranty is not assignable or transferable. Our obligation
under this warranty is the repair or replacement of the defective unit or any part
thereof, except batteries, when it is returned to the SPECTRA Service
Department, accompanied by proof of the date of original consumer purchase,
such as a duplicate copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA
for warranty service. If the product is repaired or replaced under warranty,
the return charges will be at SPECTRA's expense. There are no other
express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a.lt remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b.It has not been subjected to accident, misuse, abuse, improper service, usage
outside the descriptions and warnings covered within the user manual or
non-SPECTRA approved modifications.
c.Claims are made within the warranty period.
16
2. This warranty does not cover damage or equipment failure caused by electrical
wiring not in compliance with electrical codes or SPECTRA user manual
specifications, or failure to provide reasonable care and necessary maintenance
as outlined in the user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void
when products are used in a nonresidential environment or installed outside the
United States.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. TO OBTAIN SERVICE please remove all batteries
(if any) and pack the unit carefully and send it freight prepaid to SPECTRA at the
address shown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY
PERIOD shown above, please include a proof of purchase (dated cash register
receipt) so that we may establish your eligibility for warranty service and repair
of the unit without cost. Also include a note with a description explaining how the
unit is defective. A customer service representative may need to contact you
regarding the status of your repair, so please include your name, address, phone
number and email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check
for $20.00 to cover the cost of repair, handling and return postage. All out of
warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by
email at [email protected] for updated information on the unit requiring
service. In some cases the model you have may be discontinued, and
SPECTRA reserves the right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link on the website below to enter your
information.
http://www. spectraintl.com/wform.htm
0812 Printed in China
17