Document text
English User Manual
ARCHOS
Think omatier
Hokey tk eK ek
128 MB MP3 Player/Recorder/FM Stereo Radio
USB 1.1 PC/Mac compatible
ARCHOS Ondio™ FM Recorder User Manual version 1.0
Please visit our web site to download the most recent manual and firmware for this product
Warranty and Limited Liability
This product is sold with a limited warranty and specific remedies are available to the original purchaser in the event the product fails to conform to the limited
warranty. Manufacturer’s liability may be further limited in accordance with its sales contract.
In general, the manufacturer shall not be responsible for product damages caused by natural disasters, fire, static discharge, misuse, abuse, neglect, improper handling
or installation, unauthorized repair, alteration or accident. In no event shall the manufacturer be liable for loss of data stored on disk media.
MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. EVEN IF INFORMED OF
THE POSSIBILITY THEREOF IN ADVANCE.
Archos licensor(s) makes no warranties, express or implied, including, without limitation, the implied warranties of merchantability and fitness for a
particular purpose, regarding the licensed materials. Archos’s licensor(s) does not warrant, guarantee or make any representations regarding the use or the
results of the use of the licensed materials in terms of its correctness, accuracy, reliability, correctness or otherwise. The entire risk as to the results and
performance of the licensed materials is assumed by you. The exclusion of implied warranties is not permitted by some jurisdictions. The above exclusion
may not apply to you.
In no event will Archos’ licensor(s), and their directors, officers, employees or agents (collectively Archos’ licensor) be liable to you for any consequential,
incidental or indirect damages (including damages for loss of business profits, business interruption, loss of business information, and the like) arising out
of the use of inability to use the licensed materials even if Archos’ licensor has been advised of the possibility of such damages. Because some jurisdiction do
not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitations may not apply to you.
Please see your sales contract for a complete statement of warranty rights, remedies and limitation of liability.
Furthermore, warranty does not apply to:
° Damages or problems resulting from misuse, abuse, accident, alteration or incorrect electrical current or voltage.
e Any product tampered-with or damaged warranty seal or serial number label.
° Any product without a warranty or serial number label.
° Batteries and any consumable items delivered with or in the equipment.
Warnings and Safety Instructions
CAUTION
To prevent risks of electric shock, this unit must only be opened by qualified service personnel.
Power off and disconnect the power supply cable before opening the unit.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Use of this product is for personal use only. Copying CDs or loading music, video, or picture files for sale or other business purposes is or may be a violation of
copyright law. Copyrighted materials, works of art, and/or presentations may require authorization to be fully or partially recorded. Please be aware of all such
applicable laws concerning the recording and use of such for your country and jurisdiction.
ECC Warning Statement
FCC Compliance
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
° Reorient or relocate the receiving antenna.
° Increase the separation between the equipment and receiver.
° Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
° Consult the dealer or an experienced radio/TV technician for help.
Note: During file transfer or in the PC mode, if the EUT or computer suddenly freezes or does not respond, it may be due to the electrostatic phenomenon. Please
follow the procedures below to recover the operation:
Unplug the USB cable from the EUT
Close the software application in the computer (or re-boot the computer if necessary)
Re-connect the USB cable to the EUT.
CAUTION: Modifications not authorized by the manufacturer may void users authority to operate this device.
FCC Part 15 - Operation is subject to the following two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received including interference that may cause undesired operation.
Copyright Notice
Copyright ARCHOS © 2003 All rights reserved.
This document may not, in whole or part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without
prior consent, in writing, from ARCHOS. All brands and products names are registered trademarks and the property of their respective owners. Specifications are
subject to change without notification. Errors and omissions accepted. Images and illustrations may not always match contents. Copyright ® ARCHOS. All rights
reserved.
Disclaimer of warranty: to the extent allowed by applicable law, representations and warranties of non-infringement of copyrights or other intellectual property
rights resulting from the use of the product under conditions other than as here above specified, are hereby excluded.
p
Table of Contents
Technical Specifications 5 icc sceccossoesvessaccacesvess sosccsessandescdesnssesoosesesannssevesssssessecstevessonedc
Product Introduction .......sesesesssooesesssoccecssooccssssooecscssoosessooccecssooceessscocessssececssosossessssseesss D
2.1 Buttonsand: Control EERE EET E TE EE EE OE ET 5
2:27 Startins Up the ONda a e a a a A A AiR a aai 6
FM Radio Modë sssssesssicssrsesossosssssssoosessssessssssosrsosossesssssssotsesissas soss covesosdososissssi essi 7
3.1 How to:Adjust:the: Volimes esiisa N A E N E E E EONS 7
3.2 How. to Select:ainew Station serere e E a vhs E E E E n T
3.3 How-to Greate a Station Preset. ieina e ETE R EE E NE e 7
3.4 How to:Deletea: Station Preset’ OEE E O EET EE 7
3.5 How to'Reniame.a-Station: Pe eA e a r cashes shde a a a ra ee e asies 8
3.6 Howto Gosto-a Station Preset anonse A TE EAA E AE Oo AE E EAN ASE R E 8
3.7 How to Increase the signal quality: isnod a cise E AASA a APE OEA E TAEA 8
3.8 How to set the Ondio to HOLD
Browser Mode (file system) COOCOO OOCOOCOOCOOCOOOOOOOCOOCOOCOC OOOO OOOO OOOO OOOO OOOO OOOO OOOO OOOO O OOOO OOOO OOOO O00000 000000000000 9
4.1 How to Navigate the file Structure 00... cesses cseesesecsseeecseesecaeesececsaesecseesecsensecsesaeeecsaesesuesecsesaeeecsaeeesnenaecaeeae es 9
42. How-to Recognize file ty pesic4 r a eotseat aes feck on detadates a a e dish uted add eho alee ib wee PS & 9
4.3 How to Display file information 0.0.0... cee cece cssesececeseeecseesecaeesececsaeeecsavsecsessecseaeeecsaesecnevseceeaeeecsaesesnesaeeaeaees 9
44: . Howto Deleté-afileor foldern meenen A ian elena aeald nud wus amudal ute audan ound 9
4.5 Howto Createa new folderi onirin n A T AA A ease 10
4.6 How- tousethe Text- Input Modes e E E A a E E A A E AERAR 10
4.7 How-to Read Textiles irese e E E E A E ates Sa dea es 10
Playing MP3 Music filêS.sssiisesissssisossisssssissscisssstoossciuiusisocctssavissessiscestsoasiiesosesstsssesssss ll
5.1 How to-Play-an. MP3 Tile cineenrr aan r E SE REE A r NR AE tau EN A idee NENS 11
9.2. Howo Paya Plays E Ms FUE os hd a old ees Bd A A oe had UE bs hee Ad ed Oe lad Be 11
5.3 Howto Create a Play iSite a A AA a A a a E EEA ENAA AENEA IENE eerste 12
5.4 How to Adjust the Sound Settings .........eseseseseeesessssesesesesesneresessssesesesesescsesesetrencseresssresesrseserescserstnereresseneeeresss es 13
Recórder Mde x. csc. 2cccsssssscssacessccssunsssnsesnevcsseonscesacksntieataneven otessulesseusecuonstasuusvensesscdssteteon LG
6.1 How-to Record from the: Radio areri oenn E eden beet oan hee cae aetna dan E eas Darran 14
6:2! How-to-Record 'Y OUrV O1CCs..cc.scee. csspsscsccsesees etbcehenn odagises n ence a elgeh oe e cetgebsentbvane 15
Instant Record sxsneivcien atten Set lacs WPS ee aliens ie eae ata ile slates Jue ea
Traditional Recording Method.
6.3 How to Record from your Hi-Fi unit 2.0... ee ceeescceseeecseeeecseeseceeeseeecseesecseesecsessececsaseecsevsecseusecaessenseseeeaseeenaes 16
6.4 | How to Change the Recording Bit Rate and Sampling Resolution... cei eceesecseeseseceseeeceeeecneeseeeeeseeecnaeees 17
6.5 How to make Incremental Recordings
6.6 | How to use the Retro-Record Feature
Settings and MultiMediaCard (MMC) Expansion .............ssccssssscssssssscssssccsssssccesees 1D
7.1 How to Adjust:the Setting ri n a a AIA A inva E AER AETA ATE ANANT 19
7.2 How to Expand the capacity of the Ondio with a MultiMediaCard ........s.sseseseseesssseesesessesestsesesrererrernrerernnsrseses 19
Connecting the ONDIO to a PC or Ma uu... .ccccssccccssssssccccsssssssccscssssssccsssssessccssssees 20
8.1 Connecting: Ondio:toia PC isn de ediyvcden e cut eerie dae ite ah eee eae eh de tte a E 20
8:2V - Disconnecting the: Ondio from aiPC vase sc cs aad eats cee ce cec lakes races omaha de bane dectuvas cate a a ar Esas a Enea rani nt 21
8.3 Usesthe Ondio file:formats). itt ce ht Mas Met te Relea e Vek Uae Behe ae RECURS iS beta ile 21
8.4 Connecting the Ondio to your Macintosh .0...... cee ceeeccseesecseeseeeccsesseeecsaesecsensecsesaesecsaeeecsevsecuanaecessaeeaeseesaeeeenees 21
MusicMatch™ Software .......essessoessossocesocesocessossoessoeesoeesoeesosesoseooseooesoocesoessessssssossssssss 2.2
Technical Support ......sssessscescscessscoceccooessoceccocesssccscoseccsocsscseoscocscssessoosssssesssssossssessssssssse 29
Appendix A - Settings Table...........eescoesooesocesosesossscsesosssossoosssoseooseoossooesosesosesosssosesessss 24
Appendix B - Recording Bit Rate Table...........eoessoccssocesoocsssocesoosssssosesoossssosesoossssossee LO
Appendix C - Screen & Button Descriptions ........eessosssesssesssossocesocesocesscsssessseessosesose 20
1 Technical Specifications
Capacity”
128 MB Flash memory (2 hours of MP3 music at 128 kbps, 3 hours of radio recording at
96 kbps, 4.3 hours of voice recording at 64 kbps or 128 MB of data).
* Memory capacity can be enhanced by adding MultimediaCards (MMC).
Interface and transfer to computer
USB 1.1 (PC and Mac)
Supported formats
MP3 playback (30 to 320 kbps - VBR). MP3 recording (VBR up to 128 kbps), real-time
encoding (from any analog audio source). 30 second retro-capture buffer function for
radio.
Built-in FM tuner
FM band 87.5 to 108 MHz - scan function - 30 preset stations.
Display
LCD, 112x64 pixels
Audio specifications
Stereo Analog Line-In, Stereo Analog Line-Out & Earphone Jack.
Signal to noise ratio >90 dB. Max. output power: 100mW, Frequency. response 20 HZ —
20 kHz. Harmonic distortion: <0.1%. Built-in microphone.
Sound settings and play mode
Volume, bass, treble, loudness, balance and bass boost.
Normal, Single, Repeat all, shuffle, Queue, Scan
Playback autonomy
Up to 8 hours.
Software scalability
Downloadable firmware updates from Archos website www.archos.com.
Power source
Internal: 3 AAA batteries
Dimensions
81 x 47 x 25mm (3,1” x 1,8” x 0,9”)
Weight
60 g ( 2.1 02)
System Requirements:
PC: Windows 98 SE, ME, 2000, XP (USB mass-storage). 32 MB RAM (64 MB
recommended). CD-ROM drive with digital audio extraction support.
Mac: OS version 9: 9.2 and greater; OS version 10: 10.2.4 or greater.
2 Product Introduction
Dear Customer,
Thank you for purchasing the new Ondio™ FM Recorder 128MB MP3
player/recorder/FM stereo receiver. Please take the time to read through
this user manual in order to get the fullest use of this product. Our
We hope you receive years of enjoyment from your Ondio™ FM
Recorder. If you are really into MP3 music, you may also want to
check out the its big brother, the ARCHOS Jukebox FM Recorder
which does all the same things as the Ondio™ FM but with 20GB of
storage. Thanks again for purchasing our product.
engineers packed this product with many functions and capabilities. The
better you know how to use it, the more enjoyment you will get from it. Wishing you the best music listening experience,
Remember, with the Ondio™ FM Recorder, you can...
The team at ARCHOS
Listen to FM stereo radio
Listen to MP3 files
Use it as a voice recorder
Record music directly from your hi-fi or other audio source
Store MP3, text, or any data file
Record from the built-in FM Radio
Edit cut-in and cut-out points from radio recordings
Create music Playlists
Create radio station presets
Read text files
cards (64mb, 128mb, 256mb, etc.)
2.1
Buttons and Controls
Headphone / Line-out
LCD screen
&® Up
(go up, increase)
= Left
(previous, decrease)
SSI Mode/Escape
(stop, cancel, pause, return)
<<» Power on/off
Extend the capacity by adding MultiMediaCards (MMC)
Line-in jack
USB 1.1 connector
Microphone
Right =)
(play, select, next)
Slot for MultiMediaCards
Down GJ
(go down, decrease)
2.2 Starting up the Ondio
First install the three included To start the Ondio, hold the
AAA batteries. As shown in the
photo, press downward on the top CF
ON/OFF button <~> for 3
QRGHOS Ördi :
of the battery cover and pull RHOS Grdi seconds. The main menu screen
outward. The bottom will hinge Fh Radio will appear. To shut off the Ondio,
Ee
outward and then snap out. Be Settings @ I Browser press and hold the ON/OFF button
sure to install the batteries with the
hal for three seconds, and it will shut
+ positive and — negative as Recorder
M off. Be careful to hold the button.
indicated. f
Main Menu ; ease
Opening the battery cover If you accidentally double-click it
while it is running, you will enter
the Instant-Record feature.
Master Reset: If for some reason the Ondio FM Recorder freezes operation (Electrostatic phenomenon) or does not seem to shut off, you can hold
the ON/OFF button for 12 seconds which will force the Ondio FM Recorder to execute a master reset. It will NOT erase the Ondio FM Recorder
files.
3 FM Radio Mode
This section explains Typical FM Radio playing screen
How to...
3.1 Adjust the volume Battery Level Volume Level Mode Indicator
3.2 Select a new station aren ee ee
3.3 Create a station preset F hut
zA Dete astata n Personalized Radio Preset wne 102.9 H Current Radio Frequency
Indicates a recognized radio station
Tune
3.5 Rename a station preset
Indicates stereo reception — i Steren
3.6 Go to a station preset
3.7 Increase the signal quality
3.8 Set the Ondio to HOLD * The user must enter the personalized text. The default name would have been Radio 102.5.
3.1 How to Adjust the Volume
While the radio is playing, you can adjust the volume either by the thumbwheel control on the cord of the included headphones, or by pressing on
the ® to increase the volume or ©? to decrease it. The volume indicator on the top of the screen will reflect only the changes made with the
buttons.
3.2 How to Select a new Station
To select a radio station, click once on the right button 3 to increase the frequency by .1 Mhz (move up on the FM dial). If you hold down this
button, the frequency will increase rapidly. When you release the button, the Ondio will stop at the next recognized radio station (scan for station
feature). Use the left button œŒ to decrease the frequency in the same way. If the frequency keeps increasing or decreasing automatically beyond
where you want it to stop, click quickly on the Right or Left button again to stop it.
3.3 How to Create a Station Preset
To create a station preset, tune the Ondio to the station you would like to create the preset for. Hold down the Mode button e for three seconds.
You will then be asked what you would like to do. Use the Down button ©> to highlight item 3 “Save” for example. Then press the Right button
kE | to select this response. This will save the current station as a preset in the Radio list. The default name of the station will be Radio XX. X where
the Xs stand for the frequency. You can create a personalized name for the station another time.
If you would like to create a personalised name for the preset radio station at the moment you create your preset, do as explained above, except that
when you are asked what you would like to do, scroll down to item 4 “Save as...” and you will be taken to the text input mode where you can
give the preset station a personalized name. See the section BROWSER MODE for instructions on how to enter a name in the text input screen.
3.4 How to Delete a Station Preset
Pan St | While in the FM Radio mode, hold down the Mode button O for three seconds. You will then be asked what
a. EOTS College Flac À ; FONAS Sri ,
{00 TIMELY Boston Class you would like to do. Using the Down button “ZY, highlight item 2 “go to Radiolist” and then click on the
104.9 Radio 104.9 Right button to select it. You will be brought to the Radiolist screen. Once in the Radiolist screen, use your Up
105.7 Europe 2 103.5 Pat and Down buttons to find the preset station that you would like to delete. Click on the Left button (= to delete
106.4Radio 106.4
Radiolist Screen
the preset station.
3.5 How to Rename a Station Preset
To give a personalized name to a radio station, you have to rename it. While in the FM Radio mode, hold down the Mode button e for three
seconds. You will then be asked what you would like to do. Using the Down button ©>, highlight item 2 “go to Radiolist” and then click on the
Right button to select it. You will be brought to the Radiolist screen. Once in the Radiolist screen, use your Up and Down buttons to highlight the
preset station that you would like to rename. Click the Right button to select it. You will then be asked what you would like to do. Scroll down to
item 3 “rename” and then click on the right button. you will be taken to the Text Input mode where you can give the preset station a personalized
name. See the section BROWSER MODE for instructions on how to enter a name in the text input screen.
3.6 How to Go to a Station Preset
While in the FM Radio mode, hold down the Mode button e for three seconds. You will then be asked what you would like to do. Using the
Down button <Gy, highlight item 2 “go to Radiolist” and then click on the Right button to select it. You will be brought to the Radiolist screen.
Once in the Radiolist screen, use your Up and Down buttons to select the station you would like to listen to. The station will change as you scroll
through the station presets. Once at the desired station, click on the Mode button to return to the FM Radio mode.
3.7 How to Increase the signal quality
Sometimes, the FM signal may not be very clear. You can change the tuner sensitivity (DX if you are far from the radio station or Local if you are
near the radio station). You can also turn on and off the FM stereo mode. Sometimes a station will come in more clearly if you have the FM Stereo
mode shut off.
While in the FM Radio mode, hold down the Mode button e for three seconds. You will then be asked what you would like to do. Using the
Down button <@¥Y, you can scroll down to the various options. Toward the bottom of the list, you will see the options for FM Stereo and FM
sensitivity. Click on the right button to execute the function you want. You will then be brought to a screen with the list of possible options for that
function. Highlight the option you desire, then click on play. The item with the circular mark in the front of it is the item which is currently
implemented. Click once on mode to return to the FM Stereo mode.
3.8 How to set the Ondio to HOLD
Sometimes, while you are playing the radio or an MP3 file, you don’t want buttons to react to any accidental bumping. To deactivate the buttons of
the Ondio, you need to put the Ondio into HOLD mode. To do this, hold down on the Mode button NS while you are listening to the radio or an
MP3 file. The first option is to set the Ondio on HOLD. Click on the right button. The Ondio will now go into HOLD mode where the buttons will
not react. If you do nothing when presented with the list of options, it will automatically go to HOLD mode in 10 seconds. You will see a HOLD
indication on the top right of the screen.
To deactivate the HOLD mode, press and hold down on the Mode button for 3 seconds. The HOLD indicator on the screen will disappear.
4 Browser Mode (file system)
This section explains Typical Browser Mode Screen
How to...
4.1 Navigate the file structure Battery Level Directory level Mode Indicator
4.2 Recognize file types Subfolder (directory) icon
4.3 Display file information Gies Burden
4.4 Delete a file or folder ea BFead me first :
A =liles" jazz playlist
4.5 Create a new folder Playlist file icon d Through the Fain Currently selected file
4.6 Use the Text Input mode #Brave Mew Mord
4.7 Read Text files MP3 Music file icon
Notice the vertical scroll bar on the left of the screen. This indicates that there are more files at
this level. Use the Up and Down buttons to see the files.
** Although the Ondio will store any type of file, only the files with extentions.mp3,.m3u,.txt and
folders will be displayed on the screen.
4.1 How to Navigate the file structure
Notice carefully the directory level on the top of the screen in the example above. This tells you at what depth you are in the file system.
When you turn on the Ondio, you are at the root level, level 0. From there, each time you enter a folder (Click Right button to enter a folder), you
go down one level. This indicator gives you a sense of how deep in the file system hierarchy you are. To go back up one level, you will click on
the left button =. If, for example, you are at level 02, then you should click on the Left button two times to return to the root level of the file
system.
4.2 How to Recognize file types
The Browser mode allows you to view all your MP3 files. The Ondio will store any type of file (think of it as a 128MB hard drive). However,
when you go into the Browser Mode, you will only see the files with the extensions.mp3 (music), .m3u (Playlist), and .txt (text file). As shown in
the screen above, each of these recognized file types has its specific icon type.
4.3 How to Display file information
If you would like to view information about an MP3 file, you must first play it. While it is playing or is paused, you can hold down the Mode
button e which will bring you to a Question screen. Scroll down using the Down button to the option File info. When you execute this option,
you will see information about the file such as bit rate, sample resolution, size, and file name.
4.4 How to Delete a file or folder
While in the browser mode, navigate to the file you want to delete. Once highlighted, hold down on the Mode button e until the question screen
appears. You can then scroll down (using the down button) to the delete option. Click on the right button to make the delete happen. You will then
be asked to validate your response.
4.5 How to Create a new folder
Go to the folder (directory) where you would like to create a new folder. Hold down the Mode button e until the questions screen appears. You
can then scroll down (using the down button) to the Make directory option. Click on the right button to select this option. You will then be sent
directly to the Text input screen where you can enter a name for the newly created directory. See the next section 4.6 on how to enter text.
4.6 How to use the Text Input mode
tat]
(ld: ---
Jew: The batie of Def
a tomards a [al
w towards z
Text Input Screen
When you create a folder or change the name of a file, you are sent to the Text input screen in order to
enter your text. We highly recommend that you use your computer’s file management system to rename
files and create new folders. The Ondio’s text entering screen can become very tedious to use if you have
to enter more than one or two text items.
To enter text, you will use the Up button to scroll the alphabet towards the letter a. Using the Down button
will scroll toward the end of the alphabet. After the letter z, you will go through the Upper case characters
A — Z, after these, through the numbers 0-9 and then finally through special characters. By holding down
on the Up or Down button, it will scroll through the alphabet faster and faster.
Click on the Right button 4 to accept the current letter and advance one place forward. Click on the Left
button (= as a backspace, to delete the previous letter. Hold down on the Left button to delete the entire
line and start anew. To validate your text, click on the Mode button ©. You will see a question screen
asking you to accept the text you have input, or to escape from the text input mode leaving the original
text unchanged. Note that if you are making a new folder and you escape from the text mode, no new
folder will be created.
4.7 How to Read Text files
CI ect le |
The Gnidia will read txt
files. There are tua
modes. Wrap ard raw.
This iz wrap riode.
Text Reading Mode (Wrap)
— a a
The Ondio will read Det the:
Thig iz line 2 of the text file
Same text file in Raw mode
In the Browser mode, the Ondio will display file names which have the.txt extension. Because of Ondio’ s
small screen, we recommend you read.txt files from your computer. However, there are times when you’d
like to be able to read a.txt document without having to connect the Ondio to your computer. Click the
Right button on a highlighted.txt file to open it. The top right of the screen will display Text to indicate
that you are in the text file reading screen. The top left will display the reading mode.
Hold down on the Mode button to toggle between Wrap and Raw reading modes. Reading a text file in
Raw mode will not introduce the automatic wrapping that allows you to read it line after line. A text line
may have 200 or more characters, and thus you must use the Left and Right buttons to shift the text
display to the right and left in order to read all the words.
In Wrap mode, the Ondio will wrap the sentences around to the next line. You will then use the Up and
Down buttons to scroll up and down through the text file. In this mode, the Left and Right buttons will
bring you to the beginning and end of the text file respectively.
10
5 Playing MP3 Music files
This section explains
How to...
5.1 Play an MP3 file
5.2 Play a Playlist
5.3 Create a Playlist
5.4 Adjust the Sound Quality
Typical MP3 File Playing Screen
Battery Level Current Volume level Mode Indicator
Artist name (ID 3 tag)
Album name (ID 3 tag) Joe Harmer and the Nails
et of Light
—Snather night alone
0:0315 L NNANNNEE
—= RENNENE
* If there is no ID3 tag information in the MP3 file, the file name will be displayed
Song name* (ID 3 tag)
Elapsed song time Left and right sound levels
Song length
5.1 How to Play an MP3 file
Olle: Burden
ElRead_tnie_first
SKiles' jazz playlist
d Through the Rain
# Brave Mew Mord
View of files and folders
— an j
Joe Hammer and the Mails
Speed of Light
Another night alone
0:03:15 L aoe
00405 RENNENE
Typical playing Screen
5.2
Olle: Burden
ElRead_tne_first
=le" jazz playlist
d Through the Fain
d Brave Mew Mord
Browser showing all viewable file
types
From the Main menu, go to the Browser mode (Right button) to see the files and folders on your Ondio.
As shown on the left, once in the Browser mode, (G05 displayed in the top right of the screen), you
will see MP3 files with a music note icon in front of them.
Use the Up &® or Down ®©? button to locate the file you would like to play. Once the desired MP3 file
is highlighted, click on the Right button 4 to play it. The second image on the left shows you the typical
playing screen.
If you want to pause the music, click on the mode button e once. To recommence from a pause, click
on the Right button. If you want to stop the music and go back to the Browser, click twice on the Mode
button, once to go to pause, and the second time to stop.
If you are listening to a song and would like to listen to the next song in the current folder, just click on
the right button. If you would like to fast forward or fast reverse through the song, hold down on either the
Left or Right button.
How to Play a Playlist
A Playlist is a file that contains a list of music tracks to play. This feature allows you to compile a list of
your favorite songs and store them in a file for playback later. Playlists can support up to 999 songs and
can contain songs from multiple folders. A play list is really nothing more than a text file with the list of
files to be played. When you first turn on your Ondio, your current default Playlist is empty and needs to
be populated with songs before you can play or save it. If you delete a song from a Playlist, you are not
deleting the song, but just its entry in that particular list.
From the Main menu, go to the Browser mode (Right button) to see the files and folders on your Ondio.
As shown on the left, once in the Browser mode, (AMME displayed in the top right of the screen), you
will see a Playlist file such as ‘Wes’ jazz playlist’. Playlist files have a list icon = in front of them.
Use the Up @> or Down <> button to locate the Playlist you would like to play. Once the desired
Playlist file is highlighted, click on the Right button 4 to play it. There is a setting in the Music Settings
Submenu which will allow you to have the music tracks in the Playlist played in random order (shuffle).
11
5.3 How to Create a Playlist
Papa's on the Post Office
Do it once again Féri
View of the Playlist
yesigr
en
You would like to...
zave current Playlist
2) move tack
3. play the Playlist
Playlist Question screen
The Playlist exists in the Ondio’s internal memory first, then it is saved for later use. If you create a
Playlist without saving it, it will be lost the next time you turn on the Ondio. To put a song into the
Playlist, first you will highlight it in the Browser mode. Now, hold down on the Mode button until you see
the Question screen appear. The first option will be to add the song to the Playlist. Since this option is
highlighted already, just click on the Right button to accept this choice. This song is now in the Playlist.
Navigate through your folders, and add in this same way, all the songs you would like for the current
Playlist.
When you’re done adding all your songs to the Playlist, you should save it. To do so, go to the Settings
mode (Main menu then Left button). Once in the Settings mode, you will scroll down (Down button) to
the option Open Playlist. Click on the Right button to open it. You will now see the Ondio’s Playlist. In
the Playlist screen you can do all your Playlist manipulations. To delete a song from the Playlist, click on
the Left button. Click on the Right button to go to the Question screen to see your options.
1. Save Playlist: Your first option will be to Save current Playlist. Since it is already highlighted, simply
click on the Right button to accept it. You will then be sent automatically to the Text Input screen in order
to name your file.
2. Move Track: You will notice also that in the question screen, you can move track. After selecting this
option, you can move the current song up or down in the Playlist order. Use the Up and Down buttons to
change the song’s position. Click on the Right button to set it into place.
3. Preview: You can also listen to a preview of the current song if you have forgotten what it sounds like.
Clicking on this option plays the song and then goes back to the Playlist screen when you click on Mode.
4. Play Playlist: You can simply just play the Playlist without saving it. Remember though that it will be
lost when you shut off the Ondio if you do not save it.
5. Clear Playlist: You can clear the entire Playlist with this option.
12
5.4 How to Adjust the Sound Settings
_hdusic Submenu
2. Record Subrmeri
3. Language
4. Open Playlist
5. Phil Stereo
Go to music submenu via the Settings
Menu
LAWES DOF
Te
You would like to...
1. zet HOLD on
2. Play mode
3. Bass “aie
Hold e to go to settings directly
from playing music
As shown to the left, the sound settings can be reached by going to the Settings mode. Typically however,
you will want to change your sound settings while you are listening to your music, either the radio or an
MP3 file.
While listening to an MP3 file, press and hold the Mode button e until the Question Screen appears.
You can then scroll down through the various sound settings such as Bass and Treble. Use the Left and
Right buttons to increase or decrease the value. The changes will take effect immediately and you will be
able to hear the difference. Click on Mode when finished to return to the play screen.
1. HOLD on 1. set HOLD on
2. File info 2. go to Radiolist
3. Play Mode 3. save
4. Bass 4. saveas
5. Treble 5. set stereo
6. Loudness 6. set sensitivity
7. Balance 7. go to music submenu
8. Base Boost
9. Flat
10. Edit
MP3 Question screen options Radio Question screen options
While listening to the Radio, press and hold the Mode button e until the Question screen appears.
Scroll down the list to the last option, Music Submenu, and click on the right button to select it. You will
then be taken to the music submenu where you can adjust the sound settings such as Base and Treble.
Click on Mode to return to the FM radio screen.
13
6 Recorder Mode
This section explains Typical Recording Screen
How to...
6.1 Hecord tran whe Radio Battery Level Listening volume level State Indicator
(record, pause, stop)
6.2 Record your voice Adjust rec level
Ptak Double-click Onoff to start
6.3 Record from your Hi-Fi unit rarene AGH Recording level
6.4 Change the recording and sampling bit rate L SERERREREE Left and right recording
. | li di t kk
6.5 Make Incremental Recordings aaa Siete
6.6 Use the Retro-Record Feature During radio recordings, neither the elapsed time nor the recording level indicators
will be active.
**The last bar of the recording indicator will display ! if the sound level is too high.
Optimum level should be set just before the indicators flash the ! mark.
6.1 How to Record from the Radio
To record from the radio, you will use the Instant-Record function. When you hear a song that you want
to record, you don’t want to have to fiddle with the recording level, bit rate, or other parameters. Thus, the
Ondio will use the preset parameters to record with (you can change these in the Record Settings
Submenu).
While listening to the radio, you will double-click on the power button <=». This will make the Ondio go
Source: 85.4 hhz instantly to the RECORD mode and start recording. The file name will be pre-determined as Radio_xx
RADO D£ mpi where xx is the next consecutive number of the radio recordings. The recording gain level will be preset
according to the default value in the recording settings submenu. If you would like to pause the recording,
click once on the Power button. The top right of the screen will display Pause. If you would like to
Recording Screen recommence your recording, click once again on the power button. The mode indicator will then display
Record once more. When you want to stop your recording, double-click once more. You will then return
to the regular FM Radio mode that you were in.
ATTENTION: In order to avoid any radio frequency interference, the Ondio purposely does not display
the elapsed time nor the recording levels while the recording is being made. You can be assured however
that it is recording via the Record indicated on the display.
14
6.2 Howto Record Your Voice
There are two ways to record from the built-in microphone. You can either use the Instant-Record feature which transfers you to the Record mode
with settings already made and the recording started or via the RECORD main menu. If you want to be able to control file name, bit, and sample
rates before you begin your voice recording, you should use the traditional recording method via the Record mode.
Instant-Record
j | kecon |
Source: tlic
Voice_04 rnp
Recording Screen
Traditional Recording Method
—
Adjust rec lewel
Double-click Onda to start
rec-level HE
L EERRRRRERE
RERRTTETEHE
Pre-Recording Screen
CIWES TOF
— TE)
Fou mould like to change
te...
2. input source
3. sample rate
Question Screen
While at the Main menu or in the Browser mode, you can start an Instant Recording by double-clicking
on the Power button <=>. You will be sent to the recording mode with all the settings preset and the
recording started. The file name will be preset to Voice_xx where xx is the next incremental number
voice recording. The source will, of course, be set to Microphone. The preset record level will be the
value that was set in RECORD submenu settings in the Settings mode. While recording, click once on the
Power button to pause. You will see that the state indicator displays Pause. Click on Power again to
recommence your recording. Double-click on the power button to stop your recording. You will then be
sent back to the BROWSER mode where you will be able to see the MP3 voice file.
Using the Mode button S, click it until you return to the Ondio main menu screen. Click now on the
Down button to indicate that you want to go into the Record mode. The pre-record screen to your left will
be displayed. Hold down now on the Mode button for three seconds. You will go to a question screen.
The Ondio will now give you a list of items to choose from. Use the Down button ©? to highlight item
2, input source, then click on Right @ in order to change the input source. You will see two input
sources. Scroll to Microphone and click on the right button to select it. You will then be sent back to the
list of recording options. You can also do the same thing to change the name of the file that will be
recorded, the sample rate, or the bit rate. Typically you will find it much quicker to use the Instant-Record
method to record your voice. That method, however, is less versatile.
Now that your recording level and parameters are all set, double-click on the Power button “> to start
the recording. If you need to pause, click once on the Mode button SI To resume from the pause, click
on the Right button @. To stop the recording, click the Mode button once to pause the recording, and
then click the Mode button a second time to definitively stop it. The recording is now saved as an MP3
file. During a voice recording, the Power button also can control the Pause and Stop as in the case of
Instant-Recording.
15
6.3 How to Record from your Hi-Fi unit
Lol
Adjust rec level
Double-click Ondo to start
rec-level Hee
L SERRE
RERRTTEEEHE
Pre-Recording Screen
ee) Bi
Fou mould like to change
the...
2. input Source
3. sample rate
Question Screen
To record from your Hi-fi unit, you can use the included audio cable*. Plug one end into the Ondio’s
Line-in jack. This is the jack on the top of the Ondio on the right. Plug the other end of the cable into the
Line-out jacks (Left and Right) from your Hi-fi unit, Cassette deck, CD player, or VCR. Next, return to
the Main menu (by clicking on the Mode e button) and then select the Recorder mode by clicking on
the down button ©>.
You will see a screen as that on the left. Before recording, check for a good recording level by playing the
sound to be recorded from the Hi-fi unit while watching the left and right record level indicators on the
screen. Use the Left and Right buttons to decrease and increase the recording sensitivity. The bars should
go up to the very end of the scale without causing the final bar to flash a ! mark. If you see the ! mark, this
means you are overdriving the input and you need to reduce the sensitivity a little bit.
To change the default file name Rec xx where xx is the next consecutive recording number, you can press
and hold down on the mode button. This will go to the QUESTION screen and ask you if you would like
to change the file name. You can also press and hold the Mode button to change the bit rate and sample
rate of the recording.
Now that your recording level and parameters are all set, double-click on the Power button “> to start
the recording. If you need to pause, click once on the Mode button ©. To recommence from the pause,
click on the Right button s. To stop the recording, click the Mode button once to pause the recording,
and then click the Mode button a second time to definitively stop it. The recording is now saved as an
MP3 file.
*The included audio cable connects to your Hi-fi unit via two (left and right) RCA type connectors. If you
would like to record from a device which has only a headphone jack, such as a portable radio or
boombox, you will need to purchase an audio cable which have the male stereo 3.5mm jacks on BOTH
ends.
16
6.4 How to Change the Recording Bit Rate and Sampling Resolution
These settings allow you to control the quality of the recording. There are default bit rate settings in the Record Submenu in SETTINGS. Go to the
main menu by clicking on the Mode button e. Click on the left button to go to the SETTINGS mode. Once there, scroll down with the down
button ©? to highlight the Record submenu. Click the Right button to enter into this submenu. Here, you will find all the recording presets. See
also Appendix B for technical details.
There are two default recording bit rate settings. Rec bit rate for the Radio and Line-in recordings, and mic bit rate for microphone recordings.
Scroll to the menu item and click the Left (= and Right 4 buttons to increase or decrease the setting. You can now click on the mode button to
return to the Settings menu, and then on Mode again to go back to the Main menu. Remember, when making a recording the traditional way via
the Recorder Mode (as opposed to Instant-Recording), you can always adjust the recording bit rate and sampling resolution at that time (see the
instructions on how to record).
The sampling resolution is changed in the same way. The higher the sampling resolution, the higher the quality of your music or voice will be.
However, the MP3 file sizes will also be larger. Decreasing the sampling resolution will decrease the sound quality and the MP3 file size. The
suggested settings for sampling resolution are 44.1 Khz for the Radio/Line-in recordings and 22 Khz for microphone recordings.
6.5 How to make Incremental Recordings
If you are recording multiple music tracks, for example, from your audio cassette where there are short periods of silence between each song, you
can use the Incremental Recording feature. Attention: This feature only works in the traditional recording mode, not in Instant-Recording. While
you are recording, wait until you hear the beginning of the silence between songs. At this moment, click on the right button s. This will stop and
close off the first recording, and immediately start a new recording. The name of the new recording will be the previous name with the suffix b.
Then for the next incremental recording it will be suffixed with the letter c. For example, after making a few incremental recordings, you might
have MP3 file names of, Rec_07a, Rec_07b, and Rec_07c. Note also, that when the Ondio switches from the end of one incremental recording to
the beginning of another, it will say Please Wait. Don’t worry, the recording is taking place during this message.
6.6 How to use the Retro-Record Feature
The Retro-Record feature allows you to record from the radio without missing the beginning of a song. For example, you hear a song that you like
and would like to record it. You double-click on the Power button which starts an Instant Recording. With the Retro-Record parameter set to On in
the SETTINGS menu, your Instant Recording actually starts 30 seconds BEFORE you double-clicked, thus capturing the beginning of the song
that you missed. Later, after you stop your recording (double-click on the Power button again), you will be able to Edit that song to neatly trim
away the beginning and end of your recording.
a vigl= TL] : To edit your song, you must first play it. Once it is playing, hold down on the Mode button ©. If the
Joe Hammer and the Mails
Speed nf Light selected song was recorded from the radio AND the Retro-Record setting was on when it was made AND
Another night alone the song has not already been edited, only then will there be the option in the QUESTION screen to Edit
005-18 L ae the song. You will have to use the Down button to scroll downward to see it since it will be the last option
00405 R BERERE
Select song to edit
on the list.
Now comes the tricky part. Once you select the item ‘Edit’, you will go to the EDIT mode and you will
LIVE SDOn ; ; . :
Fou would like aie i hear your recording start to play. As shown in the last image here, you are to make your Cut-in (where
you really want the song to start) and your Cut-out points (where you want the song to end). The Left and
i r r ere Right buttons have two functions so be careful. By holding down on either button, you will fast forward
GIA NE |
or fast reverse through the file. When you let go of the button, the music will play normally. When you
edit radio recording
have found the exact spot you would like the Cut-in to happen, give a simple click on the left button.
Select edit recording
Then, let the song continue playing (or fast forward toward the end) and then when you arrive at the point
17
— ET |
Please make your Gutin
and Gub-out points wing
LEFT and RIGHT buttons.
0:03:15 L aoe
00409 Re
Editing your recording
where you want the Cut-out (song end), give a simple click on the right button.
Now that you have made your edit, you can continue to use the Left and Right buttons to listen to the
entire song to verify that the edit points are as you want them to be. To finish, click on the Mode button.
The Ondio will ask you if you want to save the edit or not. If you accept your edit, it is definitive and you
cannot re-edit the music track again. If you do not accept your edit, you will be sent back to the Browser
mode with your recording untouched. It can be edited at another time.
18
7 Settings and MultiMediaCard (MMC) Expansion
This section explains
How to...
7.1 Adjust the Settings
a MultiMediaCard
Typical Settings Screen
Battery Level Mode Indicator
7.2 Expand the capacity of the Ondio with ii
4Baze Th
Vertical scroll indicates there £ Treble “oe Setting value
are more items in the list
Selected line
Left button to decrease value —7 . 3 ;
mi Base Boost aie HA button to increase
7.1 How to Adjust the Settings
C IFOHÖS Ondio
Fhul Padio
settings øA I Browser
ho a
Recorder
Main menu
mn) ee
_fWsic SUbrrieril
2. Record submenu
3. Open Playlist
4. Language
5. Fil Stereo
Settings Screen
Click on the Left button from the Main menu to go to the SETTINGS screen. If you are not at the main
menu, click once or twice on the Mode button and you will return to this main screen. Click on the Left
button œ to enter into the Settings screen.
You will use the Up and Down buttons to select the parameter you would like to change. If the
parameter’s value is a number, such as the Treble parameter, use your Left and Right button to adjust the
value. The change takes place immediately. If it is a text item to adjust, such as Language, you will be
taken to another screen where the options are displayed. Use the Up and Down button to highlight the
option you would like and then click on the Right button select it. The round indicator will then move to
that option indicating that this is the currently validated option.
You can also enter the two submenus (Items 1 and 2) for Music settings and change those parameters in
the same way. Click on Mode to return to the previous screen. See appendix A for a complete list of
parameters and their default values.
7.2 How to Expand the capacity of the Ondio with a MultiMediaCard
Your Ondio has a built-in capacity of 128 Megabytes (Flash memory). If you would like to expand that capacity, you can purchase a
MultiMediaCard (MMC) which slides right into the side of the Ondio. These can usually be purchased at the same store you bought your Ondio
from. These cards will have capacities of 64 Megabytes, 128 Megabytes, 256 Megabytes, and perhaps more. They will all work with your Ondio.
Do not confuse these with the similar looking SD cards. SD cards are not compatible with the Ondio.
You can insert the card into the Ondio while the Ondio is on or off. The MultiMediaCard (MMC) takes the place of the built-in Flash memory.
This means that you either listen to and record onto the built in memory OR the expansion MMC memory. When you insert a new (and blank)
Multimedia Memory Card, you will not see any of your MP3 files or folder because the Ondio will be looking only at what is on the inserted
memory card. If you want to listen to your previously recorded music, voice, or radio, simply pull out the memory card and your Ondio will revert
to the contents of its internal flash memory.
19
8 Connecting the ONDIO to a PC or Mac
This section explains
How to...
Ce ob
8.1 Connecting the Ondio to a PC Data is being Ondio is connected
8.2 Disconnecting the Ondio from a PC transferred to your computer
8.3. Use the Ondio file format between-thg USE
Ondio and your BUSY
8.4 Connect the Ondio to a Macintosh®
computer. Ondio connected screen
*&% NOTE*** The Ondio can only be used as an external storage device
when it is connected to a computer. You cannot use the buttons on the front
to play music from it.
8.1 Connecting Ondio to a PC
The Ondio connects to your computer via the USB 1.1 standard. Thus either a 1.1 or 2.0 USB port on your computer will work. Start up your
computer and make sure it has completely booted up the Windows operating system. Connect the included USB cable to your computer’s USB
port (larger end of cable) and then the other side (mini USB connector) to the Ondio’s mini USB port (right side). You should connect the cable to
the Ondio while it is on. For Windows® ME, 2000, and XP, no special software driver needs to be installed. These operating systems will
recognize the Ondio as a mass storage device and simply assign a new drive letter, ( e: for example) to the Ondio. See the next section below on
how to safely disconnect the Ondio from a PC.
When you connect the Ondio to a computer running Windows® 98 SE (Second Edition), it will recognize that a new USB device has been
connected to the computer and start up its Add New Hardware Wizard as shown below.
Add New Hardware Wizard
1. Windows has recognized a
new piece of hardware (the ‘Windows driver file search for the device:
Ondio) and starts its wizard.
Click on Next.
4. Windows will now go and
copy from the CD to your
hard drive, all the files it
needs to make the USB
connection operational. Click
on Next to tell Windows to
install the driver.
This wizard searches for new drivers for:
Mass Storage Device Alcor Micro USB Storage Driver for Win38-
A device driver is a software program that makes a
hardware device work. ‘Windows is now ready to install the best driver for this
device. Click Back to select a different driver. or click Next
to continue.
Location of driver:
É) EDRIVERS\ALCOR™10.INF
2. Click on the button Search
for the best driver. Open up
the CD tray on your
computer and insert the
included Archos CD-ROM
and then close the tray. Now
click on Next.
5. Windows will indicate
when it has finished copying
the drivers. Click on Finish.
‘Windows has finished installing the software that your new
hardware device requires.
© Display a list of all the drivers in a specific
location, so you can select the driver you want.
Add New Hardware Wizard
3. Uncheck the box Floppy =staiienmaeas
disk drives if it is checked, Q) To finish setting up your new hardware, you must restart your computer.
and then check the box Do you want to restart your computer now?
Specify a location. Type in
the drive letter of your CD
player (usually D) followed same process again, directing
by:/Drivers. Click on Next Windows to the drivers on the
and Windows will then load Removable CD-ROM. Ondio will now be
the correct drivers. Shh Disk [F:) ble disk. J seen as another drive in your
een here as a removable disk. Just fje management system.
copy files to and from the Ondio.
6. You will be asked to restart
the computer. Upon restarting
your computer, it may again
ask to find the correct drivers
to load. Go through the exact
Windows will search for new drivers in its driver database
on your hard drive, and in any of the following selected
locations. Click Next to start the search.
T Floppy disk drives
T CD-ROM drive
Te Microsc windows Update
I7 Specify a location:
E: Drivers v
20
8.2 Disconnecting the Ondio from a PC
Boncvosea If you are running Windows 98 SE, you can simply disconnect the USB cable from the Ondio and then
—» 15:13
S2 use the Ondio as normal. Attention: Make sure you do not disconnect the Ondio while data is being
1. Safe remove icon here transferred to or from it. Ondio displays the message BUSY under the USB graphic when it is transferring
data. You should close all programs that are accessing the Ondio while it is connected.
For Windows ME, 2000, and XP, you must remove the Ondio in a special ‘safe’ manner. You will see a
- Z
~_Safely Remove - DrivefF:) k 1036 small card icon with a green arrow in the system tray (bottom right of screen [1]). Click on this icon and
then click again on the “Remove Safely” message [2]. Wait a few seconds and a message will appear on
2. Safe remove button ;
fe the center of the screen [3] saying that you can remove the storage device. You can now safely unplug the
Ondio’s USB cable.
‘Safe to remove storage device
Warning: Failure to safely disconnect the Ondio as explained above may cause the operating system or
G) The storage device can now be safely removed from the system
Ondio to freeze and/or lose data.
3. Safe remove message
8.3 Use the Ondio file format
The format of the data structure inside the Ondio’s flash memory is the same as that of a small hard drive (FAT). Using the Windows
defragmenting tool will not corrupt the data on the Ondio. However, because there is only 128 megabytes of memory on the Ondio, doing this is
really not necessary. If you think there may be problems with the memory, you can reformat the Ondio’s Flash memory. Make sure that you
format it in FAT format (same as FAT16), NOT FAT32. The Windows® XP and 2000 version defaults to an NTFS format. Do not format it with
this type either. Always make sure you are formatting it to FAT or FAT16. You will, of course, lose all of your data if you do not back it up on
your computer’s hard drive beforehand.
8.4 Connecting the Ondio to your Macintosh
The Ondio connects to your Macintosh via the USB 1.1 standard. Thus either a 1.1 or 2.0 USB port on your computer will work. Start up your
computer and make sure it has completely booted up the Mac operating system (Either OS 9.2 and greater or OS 10.2.4 and greater). Connect the
included USB cable to your computer’s USB port (larger end of cable) and then the other side (mini USB connector) to the Ondio’s mini USB port
(right side). You should connect the cable to the Ondio while it is on. After a short wait, the Mac will automatically recognize the Ondio as a mass
storage device and place an icon on your desktop representing the Ondio. You can now drag and drop files as if it were another hard drive.
Warning: Before disconnecting the Ondio from your Macintosh, drag the Ondio icon to the trash in order to unmount it from the operating
system. Failure to do so could lead to unpredictable results including data loss.
21
9 MusicMatch™ Software
The best way to use your Ondio is by employing the included MusicMatch™ software. This software will help you to create Playlists, rename
files, change ID 3 tag information (Artist, Album, Song title), and execute other useful MP3 related functions such as transforming your personal
CDs into MP3 files for playing on the Ondio. Using MusicMatch™ is easier than managing and naming your files via the text input function of the
Ondio. Furthermore, you can download additional MP3 tracks from MusicMatch at http://www.musicmatch.com/get_music/
Installing MusicMatch™ software on your PC is quite simple. Just slip the included CD into your CD-ROM drive and the autorun system will
present you with a list of installation options. You can then choose MusicMatch™ in the language of your choice. When installing MusicMatch™,
it will ask you to enter a serial number. You will find the serial number printed on the paper pouch that the CD was packaged in. If for some reason
the autorun does not present the menu when you place the CD into your computer, you can run the installation via the executable program in the
folder MUSICMATCH. You will see a number of languages offered.
QUESTIONS ABOUT MUSICMATCH™?
There is an extensive help section in MusicMatch™ to show you how to use it. Just click on the help button as show below once you have installed it.
musicmatch
‘(LKEBOK
File Edit Yiew Options H N Fe
musicmatch
dup
PREV REC PLAY PAUSE STOP NEXT VOL
eer
22
10 Technical Support
e If technical support determines that your product needs to be returned, please contact the place of purchase to have your product
repaired or replaced (depending on problem type). Customers who purchased directly from the Archos web site should fill out
the form on the web site under Support : Product Returns : RMA Request form.
e There is both an FAQ and a 24 hour Instant Support intelligent agent at the ARCHOS website which can help you solve your
problems (www.archos.com)
e If you need live technical help, you may contact ARCHOS directly in your country’s language via the below phone numbers.
For other countries, please use e-mail technical support.
DO NOT USE PHONE SUPPORT FOR MARKETING AND SALES QUESTIONS. These numbers are
to aid those who have technical difficulties / malfunctions.
949-609-1400 (USA, Canada) 09-1745-6224 (Spain)
01 70 20 00 30 (France) 02-4827-1143 (Italy)
0207-949-0115 (UK) 02-050-405-10 (Netherlands)
069-6698-4714 (Germany)
tech-support [email protected] English (United States and Canada customers)
tech-support .eu@archos .com English or French (Europe and the rest of the planet)
tech-support [email protected] German (Germany)
tech-support [email protected] Japanese (Japan)
To respond to your e-mails efficiently, when sending one, please indicate the product name and question type in the Subject of the e-mail.
For example:
To: tech-support.us @archos.com
Subject: Ondio — Playing a Playlist
* TOD sek REA
MERWE ORE eae ITONA ME ELD +1
ARCHOS Technology ARCHOS S.A. ARCHOS (UK) Limited ARCHOS Deutschland
3, Goodyear — Unit A 12, rue Ampére 3 Galileo Park GmbH
Irvine, CA 92618 USA 91430 Igny Mitchell Close Bredelaerstrasse 63
Phone: 1 949-609-1483 France West Portway 40474 Düsseldorf
Fax: 1 949-609-1414 Phone: +33 (0) 169 33 1690 Andover Germany
Fax: +33 (0) 16933 1699 Hampshire SP10 3XQ Phone: +49 211 1520 384
United Kingdom Fax: +49 211 1520 349
Phone: +44 (0) 1264 36 60 22
Fax: +44 (0) 1264 36 66 26
23
11 Appendix A - Settings Table
Numeric values can be changed with Left and Right buttons
Settings (in order)
Music Submenu
Multiple Choice Values
Goes to Music settings submenu
Default Value
Record Submenu
Goes to Record settings submenu
1.
2.
3. Language English, Francais, Deutsche English
4. Open Playlist Opens playlist
5. FM Stereo On, Off On
6. FM sensitivity Local, DX (Local = Odb and DX = -16db) DX
7. Firmware current value
8. Flash Diagnostic & memory available to write Space
9. Auto-off 0 (never),1,2,3,4,5,6,7,8,9,10 minutes 3
10. Retro-Record On, Off Off
11. Contrast LCD screen contrast 5
Music settings submenu VEIEN Default Value
1. Play mode Normal, Single, Repeat All, Shuffle, Queue, Scan Normal
2. Base -5,-4,-3,-2,-1,0,1,2,3,4,5 3
3. Treble -5,-4,-3,-2,-1,0,1,2,3,4,5 3
4. Loudness L5,L4,L3,L2,L1,0,R1,R2,R3,R4,R5 0
5. Balance 0,1,2,3,4,5,6,7,8,9,10 3
6. Base boost 0,1,2,3,4,5,6,7,8,9,10 3
7. Flat Resets Music Setting parameters to default
Record Settings Submenu Values Default Value
1. Rec sample rate 16 Khz, 22.5 Khz, 24 Khz, 32 Khz, 44.1 Khz, 48 Khz 44.1 Khz
2. Rec bit rate 0,1,2,3,4,5,6,7 5
3. Rec level 0,1,2,3,4,5,6,7,8,9,10 5
4. Voice sample rate 16 Khz, 22.5 Khz 22.5 Khz
5. Voice bit rate 0-3 3
6. Voice rec level 1-15 12
12 Appendix B - Recording Bit Rate Table
Average bit rates for Ondio Recording P
Radio and Line-in Microphone
(44.1 Khz Music) (22.05 Khz voice)
Setting 0 78 Kb/s 36 Kb/s
Setting 1 81 Kb/s 38 Kb/s
Setting 2 87 Kb/s 40 Kb/s
Setting 3 95 Kb/s 43 Kb/s**
Setting 4 117 Kb/s
Setting 5 144 Kb/s**
Setting 6 165 Kb/s
Setting 7 166 Kb/s
** Suggested Settings
* These figures are averages since the Ondio uses Variable Bit Rate (VBR) recording.
ce on the type of music or voice you record, the actual bit rates will vary
25
13 Appendix C - Screen & Button Descriptions
Reading Text Files Screen
You arrive here via the browser mode with
the user having clicked on a text file.
Ondio will default to RAW mode. RAW =
Ondio does not add carriage returns.
WRAP= Ondio does auto return so that
text is visible without scrolling to the right.
Ce Ral a
The Ondio will read Det The:
Thig iz line 2 of the text fle
en ED ae
The Ondio will read tet
filet. There are tuo
modes, Wrap arid raw.
This iz wrap riode.
Thig iz line 2 of the text file
Scroll down one line of text
Hold: scroll down high speed
00
Scroll up one line of text
Hold: scroll up high speed
F
Wrap mode: Go to beginning of text file.
Raw mode: move to the right
Ai
Wrap mode: Go to end of text file.
Raw mode: move to the left
Single click: Return to Browser mode
Long press: changes between Wrap and Raw
modes.
Text Input Screen
User arrives at this screen when he needs
to enter some text.
VARIABLE RAPID SCROLLING: The
longer the user holds down on a button,
the faster the scrolling goes.
(ld: ---
Scrolls alphabet towards a
Hold for high speed scrolling
G0} Guu
Scroll alphabet towards z
Hold for high speed scrolling
Destructive back space
Hold: erase entire line and restart
\
Dá
Accept current letter and advance one space
Click or Long press: go to Question screen.
“Would you like to ...”
1. accept name
2. escape
Question Screen
If Ondio needs to ask a question of the
user, it uses the question screen. If there
are multiple responses, the user will need
to scroll down to see the rest of the
available responses.
yez
Change folder name to:
0" “et Muzic 7
2. Mo.
Scroll up one response line
Scroll down one scroll line. Lines are numbered
so that user has sense of where he is.
Does nothing
Accept the response which is highlighted.
Escape/cancel, go back to the previous screen.
Browser Mode
The currently selected file or folder is
the one in reverse video (white with
black background) to which actions
are applied.
Actions possible:
1. play a song
open a folder
traverse the directory structure
start playing a playlist
display a text file
add song to play list
add all.MP3 in folder to playlist
NOOR N
lev = directory level; 00=root
d Brave Mew Mord
Move highlight up vertically.
M aw | Aue
Move highlight down vertically.
Go back one level in the directory structure. (go
to parent folder)
rm
1 click: enter highlighted folder, play Playlist,
display text file, play song.
Long press: go to Question screen.
“Would you like to ...”
1. add song to Playlist
2. delete
3. make directory
4. rename
4
Long press: go to Question screen.
“Would you like to ...”
1. add song to Playlist
2. delete
3. Rename
4 Make directory
26
When the FM receiver captures a station
signal, Tune will appear. If the stereo
signal is captured then the Stereo
indicator will display also. If the frequency
happens to have been named in the radio
list, the name will appear below the
frequency.
WCRE Classical hdugic
Tune
Stereo
FM Radio Mode Ce vol mh Radio| Increases sound volume
C
Decreases sound volume
One click go back 100Khz. Hold down to find
next station decrementing the frequency
E
1 click: go forward 100Khz. Hold down to find
next station incrementing the frequency.
A
1 click: go to main menu
Long press: go to Question screen.
“Would you like to ...”
1. set HOLD on
go to Radiolist
save
Save as ...
FM Sensitivity
FM Stereo
Music Submenu
NOOR WI
Settings Mode
On settings with numeric values,
adjust the values directly. Changes
take effect immediately.
2. Record submenu
3. Open Playlist
4. Language
5. Fi Stereo
Move the highlight up
(0
Move the highlight down
If the setting is a value, then decrease value
\
If the setting is a value, then increase value. If a
non-value setting, go to list of choices.
Exit settings mode and go to previous screen.
Edit Screen
We come to this screen from the play
mode if the song has been retro-recorded
from the radio.
on EN |
Please make your Gutin
and Gub-out points wing
LEFT and RIGHT buttons.
0:03:15 Lae
00409 RSG
Increase sound volume
0 | Aus
Decrease sound volume
Single click: Make Cut-in edit point
Long press: fast reverse with sound
Single click: Make Cut-out edit point
Long press: fast forward with sound
ol
Single click: close editing session and go back
to play mode. Question mode will ask you yes or
no to confirm your edit.
21.
Play Screen
One comes to this screen from Browser
mode when RIGHT is clicked for a music
track. Top right will display the status:
Play, Pause, FF, Rew. Depending on
what the user is doing. Bottom right
shows elapsed time and total time.
During hold, the top right mode indicator
will flash “HOLD”.
m ne EC
Joe Harritner and the Mails
Speed of Light
Another night alone
0:05:15 L Saas
00405 Fee
Increase sound volume
00
Decrease sound volume
Play previous song in folder or play list if playing
from a play list.
Long press:
backward
review (with sound) going
>A
Click: Play next song in folder or play list if
playing from a play list (or play after being
paused).
Long press: fast forward (with sound)
Q) a
First click: pause the song. Second click, stop
and display the browser.
Long press: Question mode: “You would like to
set HOLD on*
display file info
Play mode
Base
Treble
Loudness
Balance
Base boost
Flat
0. edit recording**
m asa Ee Sa
*
automatically activates in 10 seconds if no
other choice is made. Hold the Mode button for 4
seconds to deactivate the Hold mode.
** will not be visible if non-radio recording
Record Mode
User arrives at this screen either from
Instant-Record feature, or from the main
menu Recorder button.
oe
Adjust rec level
Double-click Ondo to start
rec-level Hew
L EERRRRRRE
FOOSOO0onEo
Pre-Recording Screen
Po Record |
File Mame: Kadin _04
Source: Radio
rec-level HG
L EERE
0:00:00 RUPTEEEEEEE
Status box shows status of the
recording. Status box states: stop,
pause, record.
Adjust listening volume up
Adjust listening volume down
Before recording: decrease recording level
N sensitivity.
i Before recording: increase recording level
~] | sensitivity.
During recording: next (incremental recording) or
unpause from pause state.
For incremental recording, files are suffixed with
a,b,c. ex: rec_28e for the fifth recording started
with rec_28a.
During recording: Click once to pause.
During recording pause: Click to stop.
Before recording: Long press: Go to question
screen:
“Would you like to change the...”
1. file name
2. input source
3. sample rate
4. bit rate
Double-click = start recording
Single-click = pause recording
Single-click again = unpause recording
Double-click again = stop recording
28
Radio List Screen | Fadiolist | Z A 5 Move the cursor up the list
89.7 KGTS College Flac
You arrive at this screen from item 2 of Move the cursor down the list
C
question screen in FM radio mode. 100.7 WELK Boston Glast
As one clicks the up/down buttons, the 104.4 Radio 104.3 Click to delete current radio station.
station heard will change to the one 105.7 Europe 2 103.5 Par J
indicated. 106.4 Radio 106.4
1 Click: goes to question screen and asks
“Would you like to...”
1. delete this station
2. rename this station
4
Q 1 click: Goes back to FM mode.
Long press: goes to question screen and asks
“Would you like to...”
A: delete this station
2. rename this station
Playlist Screen Move the cursor up the list
You arrive at this screen from item 4 of Move the cursor down the list
the Settings mode (Open Playlist). i í Wi i
Papa's on the Post Office
Do once again Féri
Click to delete current song.
Hold to clear the entire Playlist.
LIES OOF
—
You would like to ...
1 click: go to question screen “You would like
to...”
1. Save current Playlist
Move track*
A
1. save current Playlist 2
2. mowe tack 3. 5 second song preview
4.
3. play the Playlist Start playing the Playlist
* a circle will indicate this item to be moved with
the up/down buttons. Right button to cement
item into new position.
1 click: Return to previous screen.
Long press: go to question screen “You would
Q
like to...”
1. Save current Playlist
2. Move track*
3. Hear preview
4. Start playing the Playlist
5. Clear Playlist
* dual arrows will indicate this item to be moved
with the up/down buttons. Mode button to
cement item into new position
start recording in the blink of an eye
FM mode: record radio without having to fiddle with controls
and decide on source or gain levels. It
can be launched from Main, Browser,
or Radio mode. J
Instant Recording (l-rec) Instant recording allows the user to >
Main or Browser modes: record voice.
Parameters are taken from the Record
Settings submenu.
Double-click = start recording
Single-click = pause recording
Single-click again = unpause recording
Double-click again = stop recording
29