Document text
BLUETOOTH®- ENABLED
IN-DASH DVD/MP3/CD RECEIVER
MOTORIZED, FLIP-OUT 7” WIDESCREEN
TOUCH SCREEN TFT MONITOR
WITH USB AND SD MEMORY CARD PORTS
AND FRONT PANEL AUX INPUT
RDS COMPATIBLE MODEL
"OOOO": |
-PAN
AUDIO SY ;
"3
BOSS Audio Systems A U B) l @)
3451 Lunar Court +» Oxnard, CA 93030
iPod® is a trademark of Appte, Inc.
registered in the U.S. and other countries. www.bossaudio. com é aes - wel e
088 Audio Systems is not affilial pple
tech support: www.bossaudio.com/support 8 00. 9 99, 12 3 6 á ; A
eg
e BLUETOOTH®- ENABLED
= ki IN-DASH DVD/MP3/CD RECEIVER
WITH MOTORIZED, FLIP-OUT 7” WIDESCREEN
TOUCH SCREEN TFT MONITOR
BVS964B WITH USB AND SD Memory CARD Ports
AND FRONT PANEL AUX INPUT
CONTENTS RDS COMPATIBLE MODEL
CATALOG
Warm Suggestion ----------------------------------------------- 04
Features ------------------ nnn nn nn nnn te tt en concen E eeeee 05
1.Front Panel Function Instruction ------------------------------- 06
E KEE Pe ort pete eS pe DEE ae Sp ine ore pi nee nine a EE SES 07
3-Remöte Control Dt Seene sees 09
4.Main Menu Touch Operation-----------------------------------: 11
5.RDS User Operation--------------------------------------------- 15
6.Radio Operation ---- -------------------------------------------- 16
TAudi EE 18
8:Disc Play Touch Operationt..< eenegen 19
9.DVD Basic Operation ------------------------------------------ 24
10.VCD Basic Operation------------------------------------------ 27
11.CD Basic Operation ------------------------------------------- 30
12.MP3/USB/SD Operation --------------------------------------. 82
13,Blaetooth Function Instrüction EES 33
14. IPOD READY ------------ +0 errr ne nnn nn ern tien enn 35
15.Other Play Modes -------------------------------------------- 37
16. Troubleshooting ---------------------------------------------. 38
17.Wiring Diagram----------------------------------------------- 39
18.Specifications ------------------------------------------------ 40
EE Bee 41
20.SETUP NEED PASSWORD ------------------ BEER 41
03
INSTRUCTIONS
Welcome
Thank you for enjoying our digital car A/V product.
To properly use this product, please go through this instruction manual for installation
and operation, and put it in a safe place for future use!
WARNING
1. Please keep the disc slot clean, wipe it off when there is some dirt on it, please wipe
off the dirt on disk before slot it into the unit. If dirty on disk go into the slot with disc,
that will lead to a slowdown of the unit or cannot read the disc.In fact,that is nota
quality problem.Please turn to the professionals for cleaning the laser. That may
bring you some inconvenience.
2. Playing disc for a long time or at a high volume level will influence the life of unit. To
protect this unit, please work with radio, middle level volume level during long time use.
3. This unit is set up by precision parts. Please do not open the unit or adjust any parts
inside unit by yourself.
4. Please do not touch LCD display by hard objects to protect it from scratch.
5. To avoid accident caused by scatterbrain, driver should not operate this unit or watch
its screen during driving.If needed, please park the car ina safe place before
operation.
6. This unit is for a 12V power supply and negative ground system, please do not
connect it directlyto a 24V truck or bus.
Note: We keep improving this product, if there is any change, please forgive us do not
announce.
04
INSTRUCTIONS
mme
FEATURES
DVD PLAYER
1.MPEG-4 Decoder Technology
2.Compatible with MP4(AVI/5.X), DVD(DVD-R/DVD-RW),VCD,SVCD,CD-RW,
WMA,MP3,JPEG
3.Supporting Multiles Subtitles, Angles, Languages
4.Childlock function
5.4-Channel Audio Output
6.Pause play, UP/Down, Stop, Zoom, PBC Function
RADIO
1.AM/FM Radio Tuner
2.30 Radio Preset Stations (18FM, 12AM)
BULETOOTH FUNCTION
1.Bluetooth wireless transfers
2.Displaying bluetooth paring and connection status, call status, and caller's ID
3.Fast performance, fast connection, accurate and sensible search for devices inrange
4.Support A2DP, AVRCP, HS/HF for handling calls and playing music
05
INSTRUCTIONS
1. Front Panel Function Instruction
06
INSTRUCTIONS
2.BASIC FUNCTION
1. OPEN
Press the button to open/close the screen.
2. MODE Button
When the unit is power on, Repeat press this button can switch to different function
mode as following picture. + RADIO
Note: When the device i mp
without connecting to USB, use
SD, CDC or DVD no disc inside, op
the system will automatically DI
skip these related working mode. mp (Optional)
Ww (Optional)
wei ops (Optional)
3. MUTE/TFT on/off Button
Press this button to shut off sound output, repress this button to resume sound output;
Long press this button longer to turn on/off TFT LCD display.
4.(VOL/SEL) Volume adjustment mode
Repeat pressing this button can select the VOL. BAS. TRE. FAD adjustment mode. Then
can rotate the button to adjust VOL. BAS. TRE. FAD as youlike. `
5.AMS Program preset
Under radio mode, press this button for a short moment to start scanning preset programs.
6 BAND
In radio mode, press this button to switch band, the sequence is as follows:
FM1—FM2-—-FM3—AM1-AM2
V. e
In radio mode, press the button for the next station.
In playback mode, press the button to select the next song. Long press it to fast
backward.
8. A
In radio mode, press the button for the previous station.
In playback mode, press the button to select the previous song. Long press it to
fast forward.
INSTRUCTIONS
9.USB
Insert USB device, the unit will play the files automaticlly.
10.SD
Insert SD/MMC card, the unit will play the files automaticlly.
11.Number Button 1 / Pll
In radio mode, press this button to hear radio preset;
In disc playback mode, press this button for Play/Pause.
12.Number Button 2/RPT (Repeat Playback)
In radio mode, press this button to hear radio preset;
In disc playback mode, press this button to repeat the current track indefinitely.
13.Number Button 3/RDM (Random playback)
In radio mode, press this button to hear radio preset;
In disc playback mode, press this button to play frocks on the disc in random order.
14. Number Button 4/ E
In radio mode, press this button to hear radio preset;
In disc playback mode, press this button for to stop playback.
15. Number Button 5/ W
In radio mode, press this button to hear radio preset;
16. Number Button 6/A
In radio mode, press this button to hear radio preset;
17.AUX
Insert AUX input cable, then press AUX conenters AUX mode.
18.IR
To receive infrared signal from the remote control.
19.4
When there is a disc in the unit, press the button to eject the disc.
20. RESET
If the unit or its connected device does not work normally, use prong object to press the button.
After the unit restart, the setup returns to its previous status.
21.MIC
Input interface of blutooth microphone
22.IPOD
Insert IPOD device,the unit will play the files automaticlly
08
INSTRUCTIONS
3. REMOTE CONTROL FUNCTION
st Q
Q ENTER (>) semue
e (el
POWER ON/OFF
MUTE
TIME DISPLAY
SOURCE
EQ
SEEK m /SEEK m
VOL+/VOL-
SEL
LOUD
BAND/ P/N
LOC / RDM
STOP
PLAY/PAUSE
MO/ST PROG
GELIES
1.POWER
Sua
Amero) | TNE
stow) lasas)
200 ` MEU
HAASE SABRE
|
1)
ES
Sa
N =y
N E
0-10+
AMS/RPT
TITLE
AUDIO
SET PLAYING TIME
SUBTITLE
PBC/MENU
UP/DOWN/L/R ENTER
SLOW
ANGLE
SET UP
OSD
ZOOM
MENU
Press once to switch on, press again
to switch off.
2.MUTE button
Press once to turn off audio output,
press again to resume volume level.
3.DSP
Press this button to show the time.
4.SOURCE button
Press this button to choose audio sources.
5.EQ button
Press this button to choose POP, ROCK, CLAS, EQ OFF.
6. SEEK re /SEEK a button
Press this button to manual tuning,speed
or quick back, previous song and next song.
7. VOL+/VOL -
Press this button to increase or decrease
volume level.
8.SEL button
Press this button to choose sound feature.
9.LOUD button
Press this button to startup LOUD function.
10.BAND /P/N button
In radio mode, press this button to choose
band. In VCD,DVD mode,press this button
to choose AUTO,PAL or NTSC system.
11.LOC/RDM button
In radio mode, press this button to switch
between local and direction. In VCD, CD
mode, press this key to randomly play.
12.STOP button
Press this buttonte-stop playing.
13.PLAY/PAUSE button
Press this button to switch between play
and pause. In stop mode, press this button
to play.
14. MO/ST PROG button
In radio mode, press this button to choose
stereo or mono station. In audio Mode, it
can help STOP button for programmed play.
09
INSTRUCTIONS
15.0-10+ button
Press this button to choose desired
song, section, preset stations.
* Decimal numbers, for example the 19"
song, press 1,9 button
* Centesimal numbers,for example, the
120"song, press 1,2,0 button.
16.AMS/RPT button
In radio mode, press this button to
browse stored stations. In audio mode,
press this button to play repeatedly.
17.TITLE button
In DVD mode, press this button to
play back to the top menu of disk.
18.AUDIO button
In DVD mode, press this button to switch
language of dialogue. In VCD mode,
press this button to choose left track,
right track, and stereo.
19.SET playing time
In DVD mode, press this button,you can
define playing time.
20.SUBTITLE button
In DVD mode, press this button to switch
language of subtitle.
21. PBC button
In VCD mode, press this button to display
all song menu, work with number button
to choose songs.
22. UP DOWN,LEFT,RIGHT,ENTER
button
In DVD mode, press this button to move
cursor up, down, left, right to choose item
in menu. Press enter button to confirm
choice.
23.SLOW button
In audio mode, press this button to slow
backward and slow forward.
24.ANGLE button
In DVD mode, press this button to
change play angle.
25.SETUP button
In audio mode, press this button to
choose different set items.
26.0SD display
Press this button to display the title
chapter and the left time.
27. ZOOM button
In DVD/VCD mode, press this button to
ZOOM in.
28. MENU button
Press this button to back to the main menu.
BATTERY CHANGE
When control distance of remote control
become shorter or no function, pls change
battery. Pls confirm polarity before change.
One hand press stopper, then pull out battery.
Ne
Put battery into controller
CR
Insert battery holder into controller
INSTRUCTIONS
d
4. MAIN MENU TOUCH OPERATION
| SETUP
fon}
RADIO
aA
BLUETOOTH
|
| { H
BLUETOOTH | | pv | | AUX INPUT
+ Notice: When there is no disc, USB, SD or ipod, there is a tip sound when you click
those functions .
11
INSTRUCTIONS INSTRUCTIONS
OSD SETUP Learn steering wheel control operation as follows
In the main interface, touch to enter Into following interface.
| steering wheel setup | [Touch calibration setup |
Exit |<—Bxit t f S
LS — | GENERALSETUP- — | e
time | time setup |
system setup | Sc) SS 1. pls connect the positive pole/negative pole from origin steering wheel control wire
[radio frequency setup] oe to our unit, power on that unit to that menu as above picture showing,click the
setup button.
(TV setup | Ea P Te j j ona eng ` SETUP Í
| em e
—— e vc UTE il
KC on | E. |
$ — Sal Ra,
Touchcalibration:
Lexi GENERAL SETUP `
raren) |
jo fi e js
SEKR
ia jo [— lox
Touch the center of" A7 to calibrate
System Setup:click this button,then input when the position misgrated.
password"888888".Click"OK"into systemsetup,
press relevant button to choose on/off.Press
“OK" button to confirm.
Radio frequency setting
According to different areas to choose frequency as shown
ask in the picture below.
| ere. Europe
H USAI USA2
ward JAPAN RUSSIA
TIME DISPLAY AND ADJUST
Time display: Touch main menu into adjust mode, and press time setup button, then the
corresponding function will be display in yellow words.
(1)Press “+” on hour setup to add hour, press “-” to reduce hour;
(2)Press “+” on minute setup to add minute, press “-” to reduce minute.
NOTE: Touch the correspondence function, it will be showed in green background.
The unit include two times system: Europe time (24 hour setup), America time (12
hour setup), It indicate morning time while show the AM wark, and it indicates
afternoon time while show the PM mark.
12 13
4.make a note for origin car steering wheel control function.
INSTRUCTIONS , INSTRUCTIONS
mops 5.RDS USER OPERATION
aED
4 3. saav
2 ` SS Short press on this button to increase radio frequency;
4q 3 aw d A é
w- longer press on this button to seek radio channels
w= |c : = frequency increased direction.
5.(1)press the button step by step on car steering wheel control and write it down,then Short press on this button to decrease radio frequency;
DO n en longer press on this button to seek radio channels
click “allocate” button on our unit like as picture show frequency decreased direction.
a click number"1" to choose that function according to car origin steering. wheel control -
unction =
Touch this area to enter
& exit main menu.
Power off l
Xi iG!
4 MODE
K2 1 SEEK+
4 SRC
CH —
ZEA
6.(1)as pircture indicated,click "voice" in the screen(position 1), then choose the same EA SE eae
word in the choose screen. |», Press this button to
(2) click the " confirm " button in the screen, then finish the setup. | | Ee? of the
(3) like picture show, click." confirm " button in order to keep save, click "3" to return P3 98.00MHz RS a Ge
P2 90.00MHz lea 5 108.00MHz
MI 'TE | APS
Press this button to close sound output,
re-press this button to resume sound.
l
Press PTY, when PTY is on, it means
|there is strong RDS signals output.
Press this button each time, it
In the radio state, press “APS” button, will automatically execute the
it will automatically seek radio following operation in an order
channels in the whole band and preset of FM1 -+ FM2 — FM3 —
7.like picture shows, click position 1 to choose what function button you revise , click ee GE a
position 2 to make revise to them.
Press "SEL" to enter the audio inferface,
: | Press this button to choose radio
Please refer to page 18 for function.
channels'name, please refer to
details of theuser manual.
>
Press TA, When TA is on, itmeans the unit |
is automatically tracking RDS radio channels |
8.click area 1 to delete all steering wheel control , and reset all steering control function
under re-do the above mentioned
14 15
INSTRUCTIONS
7. AUDIO
Press "version set up " to entry the interfaces as below:
Bass choosing: when
touched the button will be
yellow, touch this button
to exit, touch it again to
resume.
Back main menu
— Adjust front and
+ rear speaker
B.L
SS t
Adjust left and
T right speaker
M3P
DBAS | LOUD
Back main menu
EQ mode
From POP — Rock 7
Change the
listening position
Off +— Classic
Video:Standard `
v
v
Click +/- Can be set Treble, Bass.
Loud: :
Press once to loud on, press again to turn off.
INSTRUCTIONS
8.DISC PLAY TOUCH OPERATION
When playing disc, touch any position of the screen, it will display the function menu;
touch the menu and the operation of relative function will display.
Note: When loading a disc, touch screen function can not be used.
a —
OPT aw ag Fb OK PR a mb
en © o mg omg o o o
1. Click to choose play/pause
2. Click to reduce the volume
3. Click to stop playing
4. Click to choose the speed of quick back
5. Click to choose the speed speeding play
6. Click to leap backwards to play
7. Click to leap upwards to play
8. Click to exit
9. Click to enter the next page to setup
the menu
10. Click to increase the volume
11. Audio
12. Click to display title, chapter, the time
already played, the time left
13. At MP3 mode, press this button so
you can move the cursor to left/right /
up/down and select the songs which
in the system menu. then press “OK”
button to enter.
14. Click to enter next page set up menu
15. In DVD mode, touch this button to
return the directory menu.
16. Click this button to switch to different
angles of playing picture in the disc.
Repeat play
DVD: Title Repeat > Chapter Repeat >
Repeat play off
VCD: Single song repeat > Full disc
repeat — Repeat play off
MP3: Single song repeat > Directory
repeat — Repeat play off
. Click on this button to enter title menu
. Click this button to choose language,
. Click this button and the screen will
display 0-10 button.
. Click this button to zoom in/ zoom out
the picture.
22. Click to enter the menu of operation
for touching.
1
N
INSTRUCTIONS
23. Click this to choose mode as below:
VOL—BASS—TRE—BAL—FAD, after your desired
mode is selected, touch VOL+/VOL- to adjust the volume.
24. Press this button to adjust angles of the monitor
25.Back main menu
26.Color adjustment
27 Check to select your desired song or chapter
.28. Return to the menu one level
Note:
1. When playing VCD, if PBC FUNCITION is on, repeat play is not available.
2. PBC is only suitable for VCD.
3. For VCD disc with play memory, you can use the PBC function;
4. Press PBC in the remote control, Play/Off PBC, press one time to play from the first
song;
5. When PBC is on, you can choose speed forward or backward, leap forward or
backward, but repeat play is not available.
6. When PBC is on, choose casual play, scan play or search play, PBC function will close
automatically.
20
INSTRUCTIONS
DVD MODE
+ In DVD interface, touch setup "dui "button into the audio/video setup
interface as following.
AUDIO SETTING ON TOUCH SCREEN
LR "rr bag
DOSS TIIIUIH HIE
HI UE
HTH
DRUI ID E
EQ: OFF
Audio selection: EQ mode: Touch the button
VOL — BAS — TRE ~ BAL ~ FAD | to change settings:
| | Pop — ROCK- CLASSIC — OFF
When using this function, the position
bar will be highlighted.
Change the
"kl listening position
touched the button will be
yellow, touch this button
tc exit, touch it again to
resume.
v
| Bass choosing: when
Loud choosing: this function is defined
open, when it is touched at the first time,
the loud function will be closed, at the
same time, yellow light disappear.
21
INSTRUCTIONS
VIDEO SETTING ON TOUCH SCREEN
You can choose: Brightness, Contrast, Color,
Hue, adjust the image effect according to
your sight. The blue bar will show your level.
H e HÜ 7
Tree
Í H A vil HL)
[ER Tal (BOTT) (SAARI
Video mode: When using this
function, the position will be darker
on the screen.
Image mode: You can choose the area in the
broken line on the panel, standard, defined,
soft, according what you need to choose,
the blue back light will disappear.
22
INSTRUCTIONS
Calibration to re-gain touch
+ Please follow the below instructions to calibrate when there is no touch or
touch is not accurate.
Step 1:Press the mode button in the unit to switch to DVD mode.
Step 2: Inserta DVD disc, after DVD is loaded, press the stop button “
(as show in picture 1.) in the remote short, the unit will display as show in picture 2.
Di
Picture (2)
Step 3: Press “ ” in the remote as show in picture (3), the unit will display
as show in picture (4)
Picture (3) Picture (4)
Step 4:Press” A “button in the remote and then quickly press ” Y ” button and you will enter
the touch calibration interface.
Picture (5) Picture (6)
Step 5: User the touch pen to touch the center of the cross cursor, the cross cursor will move
from the center to top left corner, top right corner, right down, left down, when the
cross cursor stop at each corner, touch the center of the cursor. Then the panel will display
OK and leave the calibration interface and the unit regained touch.
Picture (7)
23
INSTRUCTIONS
9.DVD BASIC OPERATION
Slot in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button
on main menu can to play.
1. Pause play
In playing mode, press Pil button on remote control, or Pil touchbutton on display to
pause. Press again to back to normal play.
2. Stop play
In playing mode, 1) Press m/) button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press Pil button on remote control or touch
button on display to resume playing at the stored position.
2) Press wi: button on remote control twice to enter into stop mode, here, press Pil
button on remote control or touch button on display, unit will play from the first song.
3. Speed forward / backward play
In playing mode, press SEEK + button on remote control, or kk touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or <4 touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or »»/ «4 touch button on
display to choose previous/next song.
5. Switch system
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
6. Slow play
Press SLOW button on remote control to slow play. The level of slow playing is as
follows. Sequence is :
SLOW 1/2 — SLOW 1/3—+SLOW 1/4—+ SLOW 1/5
PLAY «— SLOW 1/7 «— SLOW 1/6
Note: This function can only be worked by the remote control.
7. Zoom in/ Zoom out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
as follows:
ZOOM IN 2 — ZOOM IN 3 — ZOOM IN 4 — ZOOM IN 1/2
Note: = IN OFF +— ZOOM IN 1/4+— ZOOM IN 1/3
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
24
INSTRUCTIONS
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
9. Repeatedly play
In play mode, press AMS/RPT button on remote control to start up follow repeat
function. Repeat (chapter) —> Repeat (section) ——+ Repeat (off)
pe NN
10. Angle switch
If the DVD disc is recorded with multi-angles, you can press the ANGLE button to
switch the angle during playing.
The sequence is as follow:
ANGLE 1 > ANGLE2 > ANGLE 3
Note:
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-angle.
3. If there is a P% sign on the cover of the DVD disc. The number in the sign means how
many angles the disc has.
4. You can not switch the angle when slow playing.
11.Multi-audio
There are different languages of dialogue and audio systems in DVD disc.
If the DVD disc is recorded with multi-audio, you can switch the language of dialogue
and the audio systems when playing.
Press the AUDIO button repeatedly to change the language of dialogue.
Note
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-language.
3. If there isa @)) sign on the cover of the DVD disc, ®)) means that it was recorded
by multi-language/audio system.
4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.
12.Multi-subtitle
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the sub-t button repeatedly to change the language.
Note:
1. It just can be worked by the remote control.
2. It only for the DVD disc which is recorded with multi-Subtitle
3. If there is a LZ] sign on the cover of the DVD disc [.2.]means thatit has several
subtitle.
13. Title select
In DVD mode, press TITLE button to back to the title menu. Display shows all the titles
of the disc. You can select the chapter you want by the cursor, press play button to play
the chapter.
Note: It just can be worked by the remote control.
25
INSTRUCTIONS
14. MENU select
In playing mode, press PBC button on remote control to back to the menu, display will
show chapter and section in disc. Work with A /¥ button on remote control or touch
button on display to choose your desired song. Press Ki button / ENTER button to play.
Note: This function can only be worked by the remote control.
_ OPEN: Press OPEN button on panel to eject disc.
15. Program play
In DVD mode, you can set the sequence of playing by the program function, the operation
is as follow:
PROG.
T TC TE TC
1[0 1]:[0 3] GE E H te TB 8 n
2(0 1|:[0 6] Bote Wastan Mee
See ien E EE (NICE I. hse |
EE EE 8. cass T2 aa a dE EE
PLAY p DELETE
When DVD is playing, press ST / PROG button, then display shows:
For example, program the first song, input 01, press » button move the cursor to the
second lattice, input desired song, for example, the third song. Program the second song,
press ¥ button, move the cursor to 2 [__|__. input 01, press » button move the cursor to
the second lattice, input desired song, for example, the 6" song (press 6). Press Pil button to
program play. Back to the normal mode, press the ST/PROG button, then press ki button.
Note: This function can only be worked by the remote control.
16. Digital album
Play the disc contains JPEG pictures, read the picture menu first.
1. Press Pil button on remote control, the pictures will be browsed automatically.
2. Press ENTER button on the remote control, it can be manual browsed by SREK +and
SEEK -.
3. ZOOM in picture function: During auto browsing, press pause button stop the screen,
press ZOOM button to zoom in or zoom out the picture. During manual browsing, you
can press ZOOM button to zoom in or zoom out picture, diery,
4.Under zoom in picture, you can move the picture by <y
Note: You can not move picture in normal mode and zoom out mode.
17. Setup
Press SET UP button, display will show the system set up menu and the submenu, select
the item you want by «t </> , after selecting the proper item, press &/¥/</» to press
ENTER to confirm.
Note:
1. It just can be worked by the remote control.
2. Some function setting maybe different because of the different model or disc.
3. If the selected language is not recorded in the disc, then unit will show the appointed
language.
26
INSTRUCTIONS
po
10.VCD BASIC OPERATION
Slot in VCD disc, unit will play it automatically. If disc is in slot, press DVD touch button
on main menu can to play.
1. Pause play
In playing mode, press Pi! button on remote control, or HI touchbutton on display to
pause. Press again to back to normal play.
2. Stop play
In playing mode, 1) Press m/) button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press HI button on remote control or touch
button on display to resume playing at the stored position.
2) Press wl: button on remote control twice to enter into stop mode, here, press Pil
button on remote control or touch button on display, unit will play from the first song.
3. Speed forward / backward play
In playing mode, press SEEK + button on remote control, or »» touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or 44 touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or rn /M4 touch button on
display to choose previous/next song.
5. Switch system
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
6. Slow play
Press SLOW button on remote control to slow play. The level of slow playing is as
follows. Sequence is :
SLOW 1/2 —+ SLOW 1/3—*SLOW 1/4— SLOW 1/5
PLAY +— SLOW 1/7 «— SLOW 1/6
Note: This function’ can only be worked by the remote control.
7. Zoom in / Zoom out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
as follows: ;
ZOOM IN 2 — ZOOM IN 3 — ZOOM IN 4 — ZOOM IN 1/2
Note: eng IN OFF «— ZOOM IN 1/4 «— ZOOM IN 1/3
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
27
INSTRUCTIONS
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
9.Number button
In VCD mode, press 0-9 number button to input song. For example, you want to choose
13” song, press 10+ button, and then press 3 button once to play 13" song.
Note: This function can only be worked by the remote control.
10. Repeatedly play :
In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode,
if you switch back to VCD mode, repeat playing will be cancelled.
11. Randomly play
In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When playing VCD disk, if PBC is on, RDM will not work .
12.Switch Track
In VCD mode, press AUDIO button on remote control to switch track as following
sequence: Left — Right — Stereo
13. OPEN
Press OPEN button on panel to eject disc.
14. PBC (MENU) play
In VCD mode, press this button then play the PBC and display will show whole menu in
disk, work with number button to choose song. When you are playing either song of the
PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the remote control
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.
28
INSTRUCTIONS
gg
15. VCD program playing
In VCD mode, you can set playing sequence of songs by program play function. The
program playing operation steps are as follows:
in VCD mode, press ST/PROG button, display will show;
TG TC TC
PF CEE E IE a aa B aotan
SÉ (on SE ME, d EE
Sé WË ae eee, ht HENN EE Än, e el
pes EE EE : | a, DES 16 e:
PLAY DELETE
Input the songs which you want to programmed by the number buttons on remote
control. For example: Program the first song, input your desires song, for example, the
fourth song, and press number button 4 on the remote control. Program the second song,
press y button move the cursor to 2 t==-- . Input your desired song, for example, the
eighth song, press number button 8 on the remote control. Press gi button to program
play. Back to the normal mode, press the ST/PROG button, then press Pl button.
Note: This function can only be worked by the remote control.
29
INSTRUCTIONS
11. CD BASIC OPERATION
Slot in CD disc unit will play it automatically. If disc is in slot, press DVD touch button
on main menu can to play.
1. Repeatedly play
In CD mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat Repeat play off.
2. Speed forward / backward play
Press SEEK +/ SEEK - button on remote control, or b> jaa touch button on display to
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
3. Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or »»|/ ba touch button on
display to choose previous/next song.
4. Pause play
` In playing mode, press Pil button on remote control, or PI touchbutton on display to
pause. Press again to back to normal play.
5. Stop play
In playing mode, 1) Press #/) button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press RI button on remote control or touch
button on display to resume playing at the stored position.
2) Press m/) button on remote control twice to enter into stop mode, here, press Pil
button on remote control or touch button on display, unit will play from the first song.
6. OSD
In playing mode, short press OSD on remote control to show all information of present
disk.
7. Randomly play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
8. EQ mode
1) This function can only be worked by remote control.
2) When playing CD, press the ” EQ ” button on the remote control, you can
` choose the sound mode.
9. OPEN
Press OPEN button on panel to eject disc.
30
INSTRUCTIONS
TEEN
10. CD program play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follow:
When CD is playing, press ST/PROG button, then the display shows:
PROG
TC TC: TE re
Pociaus Sn 5 Os He a
a ET 6 v2 10) 5) E EE
o EEN E EE JE em 15 _
i ore EE Zou RRE S I6 Mes
PLAY DELETE 7 |
Input the NO. of the song you want to program by the remote control, program the first
song, input your desired song, for example, the sixth song, and press number button 6
on the remote control. Program the second song, press ¥ button move the cursor to
21 _]. Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press Pil button to program play.
Back to the normal mode, press the ST/PROG button , then press Pl button,
Note: This function can only be worked by the remote control.
34
INSTRUCTIONS
12.MP3/USB/SD OPERATION
1. Insert SD card or USB, MP3 disc; click the name of the song directly to select the song
you want to broadcast. If there are pictures or video document in the disc or SD card,
~ you can select the relative icon to broadcast.
2. Playback MP4 files,the touch screen dg into the MP4 format vou can click directly
Or through remote control and touch button to choose the direction you need
MP4 repertoire.
3. This interface of DVD touch function will display if you click on KEY
(Please refer to the instruction of DVD touch function)
NOTE: By a remote control o/s stop button to return to the playback screen.
1. Pause play
In playing mode, press KI button on remote control, or KI touch button on display to
pause. Press again to back to normal play.
2. Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or »»/ M4 touch button on
display to choose previous/next song.
3. Speed forward / backward play
Press SEEK +/ SEEK - button on remote control, or P> /44 touch button on display to
speed forward or backward playing.
4. Repeatedly play
In CD mode, press AMS/RPT button on remote control, to startup following, repeat
Mp3 disc: Single song repeat Directoryrepeat — Repeat play off.
32
INSTRUCTIONS
ME EEN
43. BLUETOOTH FUNCTION INSTRUCTION
1.Enter/exit
-H
CHANGE PAIR VDIAL NOTE
Hand-free key Hang-up key
Press EE will exit Bluetooth interface and return to the main menu interface.
2.Match/connection
If you want to use Bluetooth function, you must establish a connection first.
Match the unit with Bluetooth cell phone..
[operation way]
Set your cell phone to Bluetooth mode, and use cell phone to search equipment.
After Bluetooth equipment of this unit has been search by cell phone, cell phone will
Ask you for Bluetooth matching password.. touch matching setup button on unit and input
Bluetooth Password(0000) on cell phone and confirm it. Cell phone will note to whether authorize
Connection with this equipment. Please select “yes” Cell phone will auto establish connection
with Bluetooth of the equipment within 20seconds. Under any mode(radio, DVD etc. if there is an
incoming call to your cell phone, the unit will switch from currentstate to Bluetooth. It will
automatically restore current mode after hanging up.
Note: if Bluetooth equipment matching with this unit correctly, it will display “LINK OK”
otherwise it displays “NO LINK”.
3.Dial
You can use cell phone or touch digital key on display to input telephone number. If you input wrong,
you can press ER to delete. After entering a telephone number, press ito dial. Touch Hi
to hang-up.
During call period, press “CHANGE” will let phone sound switch between speaker
of unit and speaker of Phone.
33
INSTRUCTIONS
4.Incoming display
If there is an incoming call, under any mode, system will automatically switch to
Bluetooth hand-free function interface. And it has incoming sound and
incoming display to note you to answer telephone.
5.Answer phone
When there is an incoming call, Touch EE toconnect andtouch EE
to refuse to connect.
6.Call logs
Under Bluetooth mode, press call logs button will enter into call logs interface, asshown below::
- (1)Press [dialed calls] function position, you will search for
telephone number which you have dialed.
(2)Press [received calls] function position, you will
search for telephone number which you have answered
(3)Press [missed calls] function position, you will
search for telephone number which you have missed.
BK DIALED CALL
Hie MISSED CALL
CHANGE PAIR VDIAL NOTE EXIT
34
INSTRUCTIONS
m en ne
14. IPOD READY
1. Enter (ipod) Mode:
Before enter the ipod mode, please link your ipod player with the unit. Then,
touch “ipod Icon” enter the ipod mode. If the ipod player have not link with the
unit, the unit cannot recognized the external ipod player, the unit will return to
the main menu. If the unit is working in any other mode (e.g. DVD, Radio, etc),
after you plug on the ipod player and linked well, then the unit will swatch to
ipod mode automatically.
ARTISTS
ALBUMS
GENRES
SONGS
4
(Files Menu)
This system divide the files into 8 types of categories. Just touch the category you
want, the unit will enter the certain main and play the first file in the certain
category
2. Touch Buttons:
MODE Mode Switching
>il Play/Pause
OK Confirm/Ok
Return to last OSD
Back main menu
be Cursor Up
4 Cursor Down
4 Backward
>> Forward
SCH
€
VOL Increase or decrease volume level
3. Audio play:
When you see the files menu (as PIC 1 above) , you touch the middle of the
panel , then you can see the “control menu” appear on the screen. You can
selecting by touching the button A or W
35
INSTRUCTIONS
For example: As PIC 2, touch certain category you want, then touch “ok” to inter
the category. After that, touch any file to play. It shows like the PIC 3 below.
>
My
“Administrator” ipod
love
Yes i will
As
long as you love me
Take me home country road
Love you more than | can see «2
>
109 of 289 Fx
Note:
Since “ipod” edition keeping up-date, some edition software of the “ipod” player
may not working with this unit, Sometimes, may happen compatible problem.
Sorry for the inconvenience.
Now playing
Love you more than | can see
Unknown performers
Unknown album
36
INSTRUCTIONS
cE EE EE EO eee
45. OTHER PLAY MODES
AUX IN OPERATION
1) Press “Source” button on remote control or touch “AUX” on the touch screen, switch to
AUX mode.
2) Make video input plug connect to AUX video input outlet, audio input connect to
AUX audio input outlet.
3) This unit only supply 1pcs video input & 1 pair audio input.
CCD (Car backsight function)
1) If there is a car back
camera on your car, please connect car back control line “BACK” to your car camera
control terminal, and connect video input line to the video output terminal of your car
camera.
2) When car is back, the unit will auto switch to CCD mode, and there is a “ á
appeared on the screen.
3) You can set CCD image according to your car's own position in general setting mode.
37
INSTRUCTIONS
16. TROUBLESHOOTING
PROBLEM
Can not power on
After ignition
switch off, setting
information all lose
Remote control no
function
Poor performance
of radio station
Can not load disc
Can not play disc
Can not switch
language/subtitle
No image
CAUSE
Check whether power fuse
melt or not
Some factor cause MPU wrong
operation
Wrong connection between
ignition line ACC and power
line anode pole BAIT
No enough power supply
from battery
Improper set of length of
antenna, poor connection of
antenna grounding
There is a disk inside
Disc is scratched
Put wrong side of disc into unit
Lens has dirty
There is only one language/
subtitle in disc
Video line between unit and
TV is not properly connected
SOLUTION
Change fuse same as the old one
Press RESET button on the panel by pen
point, then, power on
Reconnect line
Change battery of remote control
Check whether antenna is connected or not,
or poor connection
Eject disk ,then, slot in new
disk.
Change new disc
Slot in the disk with sign side up
Clean lens by lens clean disc
If disk is not with multi-language/subtitle, it
cannot switch language/subtitle
Reconnect lines
3 INSTRUCTIONS
gege
17.WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow the below instruction:
e Red - ACC ON (+12V) @ Grey/Grey black - Right front speaker (+/-)
e White/White black - Left front speaker (+-) -
e Purple/Purple black - Right rear speaker (+/-)
e Yellow — 12 V Constant
e Black — Ground wire
e Blue - Power Antenna / Remote Amp Turn On ® Green/Green black - Left rear speaker (+/-)
e Orange - Back-Up Camera Trigger (+) e Brown - Parking Brake (-)
Cc:
Light grey with yellow tip: 2 channel video output
Brown with yellow tip: Reversing video input
Black with yellow lip: External video input
Black with red & white tip: AUX audio input
(red right & white left)
Light grey with red & white tip: Front RCA output
(red right & white left)
Dark grey with red & white tip: Rear RCA output
(red right & white left)
D Red: SWC 1 White: SWC 2
Black: GND
Right front
7 + PURPLE +
' HI GREENIBLACK PURPLE/BLACK É
i S Right roar =
Note:
The “PARKING BRAKE” wire must be connected to the parking brake system
of your car. When the parking brake is engaged, the LCD will be allowed to view
your video. If not, the screen will produce an image saying, “PARKING BRAKE”.
This is a safety feature designed for the driver not to watch a video while driving.
The video output on this unit will not be affected by this.
39
INSTRUCTIONS
18.SPECIFICATIONS
FOWer Supply- sr- ae ese oe cee eee tee eee ee eine DC 12V
Power range - -------------------------------------------- 10.8-16.0V DC
Max operate current -- - - ------------------------------------------- 10A
Ground system- - - - - - ---------------------------------- Negative ground
AMP Rating sos: se nese ue we Stee Sees SES oie 85 WattsX4 Channels
FM tuner ,
European frequency DEE 87.5-108MHz
USA Sege TAN eebe 87.5-107.9MHz
Signal/Noise ratio - - ---------------------------------------------- 55dB
SEER SEPARATOR < == <n EE 30dB
Beemeb station Vall eee wae se oven mene GER Se ae ame Gee 20-30dBuv
Distortion rate- -------------------------------------------------- 1.5%
AM tuner
Beggener gd E win ate ai ed 522-1620kHz
USA frequency range--------------------+---+-+-------+------- 530-1710kHz
Limitnoise'sensitivitys: x= Eet same STEEN 32dB
DVD PLAYER
Signal/Noise ratio - - - - -------------------------------------------- 70dB
Frequency response - - - ------------------------------------- 20Hz-20KHz
40
INSTRUCTIONS
49. ACCESSORIES
Accessory | Quantity
User Manual 1PC
Wire 1PC
USB Cable 1PC
Keys 2PCS
Remote controller IPO
Warranty card 2PCS
20.SETUP NEED PASSWORD
Setup need password
* During actual operation, when you enter TV setup,
system setup, radio area and touch calibration, you
need to enter the password "888888".
* DVD Parental control function: The default set
for DVD is #8 adult, which means all grades of
DVD can be read without entering password.To
change the default grade, you need to follow the
below procedure: Press SETUP button on the
remote, display will show the system set up menu
and the submenu,select password and enter
0000, you will be able to choose the DVD
grade as default.
41