Document text
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
it
“>.
oe a £ 1
” A S
(CERAFIL®)
g ? i novato
tn Electronics
Murata
Manufacturing Co., Ltd. Cat.No.P61E-7
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
C O N TE \ TS CERAFIL® and "CERAFIL" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
2
EI CERAFIL® Chip Type SFECV Series 3
@ Chip CERAFIL® SFECV Series Notice 6
pA CERAFIL® Small Chip Type SFECS Series 7
@ Chip CERAFIL® SFECS Series Notice 10
EJ CERAFIL® Standard Lead Type 11
EI CERAFIL® Low-loss Type 14
EJ CERAFIL® Low-profile Type —— 117
6 CERAFIL® Lower Spurious Response Type ———___________ 20
CERAFIL® Wider Band-width Type ———_______~______ 23
EJ CERAFIL® Narrow Band Type. ——______ 25
9) CERAFIL® For FM -IF Tuners ———— 2
10 CERAFIL® Three-Elements Type SFTLA Series ———______—____ 3
Lead Type CERAFIL® Test Circuit and Characteristics Data | ———————————__ 86
Lead Type CERAFIL® Characteristics Data and Notice 37
11 Discriminators Chip Type CDACV Series 38
@ Chip Type Discriminators CDACV Series Notice 41
m Discriminators Chip Low-profile Type CDSCA Series 42
@ Chip Type Discriminators CDSCA Series Notice 44
FE} Discriminators CDALA Series 45
@ Lead Type Discriminators Notice =—£#- —-——XY—_. 49
Packaging | ————-—HJ£_-- 50
Test Circuit of Ceramic Discriminator ——— — — — — — —— —— 53
Example of Appllied Circuit) —@--—-—-—-——___________Y_———___ 54
Recycled Paper
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
@ Part Numbering (
CERAFIL® for FM
(Global Part Number) | SF ||E|{LA||10M7]|FAAO || -RO
000 O0 © O
@Product ID
Product ID
SF Ceramic Filters
@0scillation/Numbers of Element
Code Oscillation/Numbers of Element
E 2 Elements Thickness Expander mode
T 3 Elements Thickness Expander mode
2 Elements Thickness Expander mode
K (2nd Harmonic)
2 Elements Thickness Expander mode
(3rd Over Tone)
@Structure/Size
Code Structure/Size
LU Lead Type
CL Chip Type
O is expressed "A" or Subsequent code, which indicates the size.
O@Nominal Center Frequency
Expressed by four-digit alohanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
Discriminators for FM
(Global Part Number) | CD || A|| LA || 10M7 || GA || 001 | -RỌ
000 O OOQ
@P roduct ID
Product ID
CD Discriminators
@0scillation
Code Oscillation
A Thickness Expander mode
OStructure/Size
Code Structure/Size
LO Lead Type
CLI Chip Type
C is expressed "A" or Subsequent code, which indicates the size.
@Nominal Center Frequency
Expressed by four-digit alohanumerics . The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".
The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described here)
If you have any questions about details, inquire at your usual Murata sales office or distributor.
P61E7.pdf 01.10.17
@P roduct Specification
Code Product Specification
Four-digit alohanumerics express
FAAO pass-bandwidth, center frequency tolerance,
rank, series, others.
@Packaging
Code Packaging
-BO Bulk
-RO Plastic Taping g2180mm
-R1 Plastic Taping ø330mm
-A0 1500pcs. /Radial Taping Ho=18mm
-A1 1000pcs. /Radial Taping Ho=18mm
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alohanumerics indicating
"Individual Specification" is added between "@Product Specification"
and "@Packaging".
@P roduct Specification
Code Product Specification
GA Two-digit albhanumerics express
type, center frequency, rank, others
OIC
Code IC
001 Applicable IC Control Code
@P ackaging
Code Packaging
-BO Bulk
-A0 Radial Taping Ho=18mm
-RO Plastic Taping (180mm)
-R1 Plastic Taping (8330mm)
Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "@IC" and "@Packaging".
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
CERAFIL® Chip Type SFECV Series
6.9+0.3
4.05+0.4
SFECV10M7 series for FM-receivers are monolithic type
ceramic filters which utilize the energy trapped
thickness vibration-mode of the piezoelectric ceramic.
1.5+0.2
By taking advantage of the very low profile, new SFECV F _
series and PFWCC(kHz filter for AM receiver) enable uF e > B ©) (i)
` i hail \ a= ela
costomers to make AM/FM set so thin, and it can be of
help to the total chip circuit.
; : Marking
) : Input
w F Bottom Electrod
1
(2) : Ground
3
E Features 1.040.5 1.0+0.5 1.0+0.5 (3) : Output
1. Super-thin. Only 1.5mm. The most suitable ceramic % : EIAJ Monthly Code
filter available for thinning substrates. en ney ee “ee
2. Heat resistant. Reflow soldering can be performed
because of its excellent heat resistance.
3. Piezoelectric element is connected in the
sandwich shape by heat resistant substrate, thus
it has excellent mechanical strength, and it is
Suitable for automatic mounting.
4. Various bandwidths are available. Select a
Suitable type in accordance with the desired
selectivity.
5. Electrical characteristics are the same as
conventional "CERAFIL".
E Applications
1. Small, thin radios
2. Automotive radios
3. Headphone steros
Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFECV10M7KA00-RO 10.700 +30kHz within110 +30kHz 320 max. within6.0 +2.0dB 35 min.
SFECV10M7JA00-RO 10.700 +30kHz within150 +40kHz 380 max. 10.0 max. 30 min.
SFECV10M7HAOO0-RO 10.700 +30kHz within180 +40kHz 470 max. within4.0 +2.0 dB 35 min.
SFECV10M7GA00-RO 10.700 +30kHz within230 +50kHz 510 max. within3.5 +2.0 dB 35 min.
SFECV10M7FA00-RO 10.700 +30kHz within280 +50kHz 590 max. within3.0 +2.0 dB 35 min.
Part Number
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
P61E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Frequency Characteristics
SFECV10M7KA00-RO
Attenuation (dB)
9.700 10.200 10.700 11.200 11.700
Frequency (MHz)
SFECV10M7HA00-RO
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
SFECV10M 7FA00-RO
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
E Frequency Characteristics (Spurious)
Attenuation (dB)
SFECV10M7KA00-RO
G.D.T. (usec.)
G.D.T. (usec.)
Frequency (MHz)
Attenuation (dB)
SFECV10M 7) A00-RO
oO
2
m
.Q
T
=)
Cc
2
<x
70
9.700 10.200 10.700 11.200 11.700
Frequency (MHz)
SFECV10M7GA00-RO
0 5.50
1 5.00
2 4.50
3 4.00 8
=
=
4 3.50 a
(0)
5 3.00
6 2.50
2.00
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
SFECV10M7J A00-RO
0
10
20
ao
2
< 30
2
w
3
S 40
<x
50
60
70
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Continued on the following page.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E Frequency Characteristics (Spurious)
SFECV10M7HA00-R0 SFECV10M7GA00-R0
Attenuation (dB)
Attenuation (dB)
[\—
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFECV10M7FA00-RO
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
E Standard Land Pattern Dimensions E Test Circuit
(1): Input
(2): Ground
(3): Output
RF
Voltmeter
Rg=50Q2 Ri =2809 +5% R2= 3300 +5%
C2= 10+ 2 pF (Including stray capacitance and Input capacitance
of RF Volt Meter)
[_] Land (in mm) E1:S.S.G. S.S.G. Output Voltage
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Chip CERAFIL® SFECV Series Notice
E Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
= a 5sec.
240, 7 7
DOU ge
9
5 l
= Gradual Cooling
©
(eb)
Q
=
È 150f7
| 60 [30 | Time(sec.)
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of 280+5°C for 3.0+0.5 seconds.
2. Wash
The component cannot be withstand washing.
E Notice (Handling)
1. The component will be damaged when an excessive
stress is applied.
[Component direction]
2. The component may be damaged if excess mechanical L L j
stress is applied to it mounted on the printed circuit — > en ite
board. a pss which stress
3. Design layout of components on the PC board to acts.
minimize the stress imposed on the warp or flexure of the [Component layout close to board]
board.
4. After installing chips, if solder is excessively applied to =< Susceptibility to
the circuit board, mechanical stress will cause 000050000 pices A
destruction resistance characteristics to lower. To A Aani
prevent this, be extremely careful in determining shape
and dimension before designing the circuit board
diagram.
5. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
6. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. the use of
solder containing Ag should be done to prevent the
electrode erosion.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated well.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics.It may be a cause of mis-
correlation if there is any deviation, especially stray
capacitance, from the test circuit in the specification.
,
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
SFECS10M7 series for FM-receivers are small, high
performance and super thin (1.4mm) filters.
Piezoelectric element is connected in the sandwich
shape by ceramics substrate.
They have 1.4mm thickness and small mounting area.
(3.5x3.1mm)
New SFECS series and PFWCC(kHz filter for AM receiver)
enable customers to make AM/FM set so thin and small
sized.
E Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm thickness, and have
a small mounting area (3.5x3.1mm) enabling
flexible PCB design.
3. Various bandwidths are available. Select a
Suitable type in accordance with the desires
selectivity.
4. Operating temperature range :
-20 to +80 (degree C)
Storage temperature range
-40 to +85 (degree C)
E Applications
1. Small, thin radios
2. Headphone stereos
CERAFIL® Small Chip Type SFECS Series
I 3.45+0.2 - i ead
EA *
3.10+0.2
Input electrode marker
0.478-3
0-0.3 0.640.3 E 0.6+0.3 0-0.3
Os
gnia! mia
(1.35) (1.35)
P61E7.pdf 01.10.17
0.70.3 0.70.3 0.70.3
IH
AE (1.30) (1.30) AS
0-0.3 0-0.3
85+0.3 0.85+0.3
0
: Input
: Ground
: Output
: Reference
: EIAJ Monthly Code
1)
2)
3) : Float (Signal line)
4)
*)
(in mm)
Bare NuMBER Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFECS10M7HAO00-RO 10.700 +30kHz within180 +40kHz 470 max. within4.5 +2.0 dB 30 min.
SFECS10M7GA00-RO 10.700 +30kHz within230 +50kHz 510 max. within3.5 +2.0 dB 30 min.
SFECS10M7FA00-RO 10.700 +30kHz within280 +50kHz 590 max. within3.0 +2.0 dB 30 min.
Area of Attenuation : [within 20dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Frequency Characteristics
SFECS10M7HA00-RO SFECS10M7GA00-RO
J a 3 a
m B m A
© = 2 =
z = z K
5 a 5 a
z 5 z 3
19 10.500 10.600 10.700 10.800 10.900 og
Frequency (MHz) Frequency (MHz)
SFECS10M7FA00-RO
co >
g g
5 3
E =
5 c
E O
T
19 10.500 10.600 10.700 10.800 10.900 Eoy
Frequency (MHz)
E Frequency Characteristics (Spurious)
SFECS10M7HA00-R0 SFECS10M7GA00-RO
0
10
S a 3
S 5
E 5
5 30 S
<x <x
oh d HS AA da
a a E
aaa AN E A 50
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFECS10M7FA00-RO
Attenuation (dB)
Frequency (MHz)
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Standard Land Pattern Dimensions E Test Circuit
S|
i
ise)
5| Rg
$
n
| SSG: EE
=-10dBm Voltmeter
t
Rg=50Q (1) : Input
08 06 08 06 08 R1=2800 (2) : Ground
R2=3300 (3) : Float
(1): Input (2): Ground (3) : Float Signal Line (4) : Out put ae Hit i (4) : Output
: ncluaing stray Capacitance
[| It shows solder resist land pattern. (in mm)
and Input capacitance of RF Voltmeter)
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Chip CERAFIL® SFECS Series Notice
E Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
(2) Soldering Iron
Filter shall be soldered at 280+5°C for 3.0+0.5 seconds.
The soldering iron shall not touch the filter white soldering.
2. Wash
The component cannot be withstand washing.
E Notice (Handling)
1. The component will be damaged when an excessive
stress is applied.
2. The component may be damaged if excess mechanical
stress is applied to it mounted on the printed circuit
board.
3. Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of the
board.
4. After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremly careful in determining shape and dimension
before designing the circuit board diagram.
5. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
6. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. The use
of solder containing Ag should be done to prevent the
electrode erosion.
7. Do not clean or wash the component as it is not
hermetically sealed.
8. In case of covering filter with over coat, conditions such
as material of resin, cure temperature, and so on should
be evaluated well.
9. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in re-flow soldering.
10. Accurate test circuit values are required to measure
electrical characteristics.
lt may be a cause of mis-correlation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
Peak
— 240 (240°C max.)
N
oO
O
ı Heating
Pre-heating (200°C) ,
(120-170°C)
4
O
O
Temperature (°C
Gradual
Cooling
aa [e -4
30 Sec. 60-120 sec. 30 sec. 120 sec.
min. max. min.
[Component layout close to board]
Susceptibility to
stress is in the order
of : A>C>B
Perforation [B]
aE
OO0O0 C_)O000
[A] sh
i
P61E7.pdf 01.10.17
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
CERAFIL® Standard Lead Type
SFELA10M7 series for FM-receivers are monolithic type ERA
ceramic filters which use the energy trapped thickness S
vibration-mode of the piezoelectric ceramic.
@ Features
1. These miniature filters have high mechanical
strength.
2. Low loss, favorable waveform symmetry, and high
TE (1) : Input
selectivity. SFELA10M7HA00-B0 2): Ground
2 : r i i : Outpu
3. Various band widths are available for applications faa
in wide to narrow bands.
4. Small dispersion and stable characteristics.
5. Change in center frequency is typically within —
+30ppm/(degree C) at -20 to +80 (degree C). ——
i š ija m RKIN al
6. High reliability. D
|
(1) : Input
SFELA10M7GA00-B0 (2) : Ground
(3) : Output
(in mm)
7.0+2.0
an
2.5+0.2/2.5+0.2
(1) : Input
SFELA10M7FA00-B0 (2) : Ground
(3) : Output
(in mm)
@ g m
PaA Nur ber Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFELA10M7HAO00-BO 10.700 +30kHz within180 +40kHz 520 max. 7.0 max. 40 min.
SFELA10M7GA00-BO 10.700 +30kHz within230 +50kHz 570 max. within4.0 +2.0dB 40 min.
SFELA10M7FA00-BO 10.700 +30kHz within280 +50kHz 650 max. within4.0 +2.0dB 30 min.
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
11
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Frequency Characteristics
SFELA10M7HA00-B0 SFELA10M7GA00-B0O
0 6.00 5.50
1 5.50 5.00
2 5.00 4.50
on > an >
Ko) O xe) O
pe) 4.50 ® teats D
g K £ K
5 4 400 a 5 3.50 Q
<= o = 0)
5 3.50 3.00
6 3.00 2.50
2.50 7 2.00
10.500 10.600 10.700 10.800 10.900 10.500 10.600 10.700 10.800 10.900
Frequency (MHz) Frequency (MHz)
SFELA10M7FA00-BO
co >
a g
S 3
S k
Š c
z O
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
E Frequency Characteristics (Spurious)
SFELA10M7HA00-B0 SFELA10M7GA00-B0
0 0
10 m
20 20
m oOo
2 g
< 30 < 30
© ©
w w
=) DS
o 40 5 40
<x <x
50 50
60 60
70 70
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
Continued on the following page.
12
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E Frequency Characteristics (Spurious)
SFELA10M7FA00-B0
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
E Spurious Response
SFELA10M7FA00-B0
Attenuation (dB)
Frequency (MHz)
13
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
CERAFIL® Low-loss Type
7.0+2.0
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
T
MARKING,
E Features
1. Insertion loss is 1 to 1.5dB lower than
conventional products. This types are useful for
elevating the sensitivity of sets.
i i E" (1) : Input
2. Small dispersion and stable characteristics. SFELA J AAO-BO 2) Ground
= : Output
3. Excellent shape factor of frequency response. R
4. Good waveform symmetry.
7.0+2.0
[marking]
"i
2.5+40.22.5+0.2
(1) : Input
SFELA_HAAO-BO (2) : Ground
= (3) : Output
(in mm)
(3) BD (1)
7.0+2.0
eens ae
IwARKiNG) markina!
ae
(1) : Input (1) : Input
SFELA_GAAO-BO (2) : Ground SFELA_FAAO-BO (2) : Ground
= (3) : Output a (3) : Output
(in mm) (in mm)
pave Nur ber Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFELA10M7JAA0-BO 10.700 +30kHz within150 +40kHz 360 max. within4.5 +2.0dB 35 min.
SFELA10M7HAAO-BO 10.700 +30kHz within180 +40kHz 470 max. within3.5 +1.5dB 35 min.
SFELA10M7GAA0-BO 10.700 +30kHz within230 +50kHz 520 max. within3.0 +2.0dB 35 min.
SFELA10M7FAA0-BO 10.700 +30kHz within280 +50kHz 590 max. within2.5 +2.0dB 30 min.
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
14
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Frequency Characteristics
SFELA10M7) AAO-BO SFELA10M7HAAO-B0O
0 6.50
1 6.00
2 5.50
oO x on A
g g PE 5.00 8
5 3 £ c
z : : z
= lm 5 4 4.50 Q
ž S z i
5 4.00
6 3.50
4.00 7 3.00
10.500 10.600 10.700 10.800 10.900 10.500 10.600 10.700 10.800 10.900
Frequency (MHz) Frequency (MHz)
SFELA10M7GAA0-B0 SFELA10M7FAA0-BO
J 3 J a
= D = A
5 3 S 3
w = 2 z
= m E n
x d < z
2.00
7
¢ 10.500 10.600 10.700 10.800 10.900 i 10.500 10.600 10.700 10.800 10.900
Frequency (MHz) Frequency (MHz)
E Frequency Characteristics (Spurious)
SFELA10M7) AAO-BO SFELA10M7HAAO-BO
oO
oO
Attenuation (dB)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
Continued on the following page.
15
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E Frequency Characteristics (Spurious)
SFELA10M7GAA0-BO SFELA10M7FAA0-BO
Attenuation (dB)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
16
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
CERAFIL® Low-profile Type
SFELB10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
E Features
1. Installed height is 5 mm, making it well suited for |
compact, thin sets. ‘| 1
P 2.5+0.2 |2.5+0.2
2. Environmental reliability is the same as those of rT Patent
the ceramic filter SFELA10M7 series. SFELB10M7KA00-BO Beenie
2.540.2 |2.5+0.2
(1) : Input (1) : Input
SFELB10M7J A00-BO a ae SFELB10M7HA00-BO een
(1) : Input (1) : Input
SFELB10M7GA00-BO Sout SFELB10M7FA00-BO o
Bae Nur ber Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFELB10M7KA00-B0 10.700 +30kHz within110 +30kHz 350 max. within7.0 +2.0dB 30 min.
SFELB10M7JA00-BO 10.700 +30kHz within150 +40kHz 360 max. within4.5 +2.0dB 35 min.
SFELB10M7HAO00-BO 10.700 +30kHz within180 +40kHz 470 max. within3.5 +2.0dB 35 min.
SFELB10M7GA00-BO 10.700 +30kHz within230 +50kHz 570 max. within3.0 +2.0dB 40 min.
SFELB10M7FA00-BO 10.700 +30kHz within280 +50kHz 650 max. within3.0 +2.0dB 30 min.
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
17
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Frequency Characteristics
SFELB10M7KA00-BO
oO
2
=
2
©
æ]
Cc
©
<x
f 10.620 10.660 10.700 10.740 10.780 a
Frequency (MHz)
SFELB10M7HA00-BO
0 7.00
2 6.00
oO
2
D +H 7 7
2
w
=)
= 4 5.00
<x
5 \ 4.50
6 | 4.00
¢ 10.500 10.600 10.700 10.800 10.900 oy
Frequency (MHz)
SFELB10M7FA00-B0
0 5.50
1 5.00
2 4.50
g
E 4.00
.Q
T
=]
= 4 3.50
<x
5 3.00
6 2.50
7 2.
10.500 10.600 10.700 10.800 10.900 i
18
Frequency (MHz)
G.D.T. (usec.)
G.D.T. (usec.)
G.D.T. (usec.)
Attenuation (dB)
Attenuation (dB)
SFELB10M7J A00-BO
10.600 10.700 10.800
Frequency (MHz)
10.500
SFELB10M7GA00-B0
10.900
10.600 10.700 10.800
Frequency (MHz)
10.500
P61E7.pdf 01.10.17
G.D.T. (usec.)
G.D.T. (usec.)
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Frequency Characteristics (Spurious)
SFELB10M7KA00-B0 SFELB10M7J A00-B0
Attenuation (dB)
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFELB10M7HA00-B0 SFELB10M7GA00-B0
oO oOo
2 g
= =
2 ©
w w
=) =)
c Cc
2 g
< <
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFELB10M7FA00-B0
o
2
=
2
w
=
c
2
<
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
19
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
CERAFIL® Lower Spurious Response Type
pm
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
Gat 1)
TEIAJ 1
CM |CODE:
E Features
1. This type has lower spurious response compared to
the standard filters.
2. This types are suitable for higher spurious
suppression radio. SFELA10M7KABO-BO
7.5+2.0
7.5+2.0
ON
Í MARKING |
Ld
eee
‘EIAJ_ |
G ICODE;
[ MARKING |
LLa
E
‘EIAJ_ |
e ICODE;
7.0+2.0
0.3+0.1
SFELA10M7) ABO-BO SFELA10M7HABO-BO
7.5+2.0 7.5+2.0
| MARKING |
‘EIA |
G |CODE:
‘EIAJ |
|CODE:
7.042.0
|
| E i |
0.30.1
SFELA10M7GAB0-B0 SFELA10M7FAB0-B0
Pan Number Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFELA10M7KABO-BO 10.700 +30kHz within110 +30kHz 350 max. 7.0 +2.0dB 45 min.
SFELA10M7JABO0-BO 10.700 +30kHz within150 +40kHz 380 max. 5.5 +2.0dB 45 min.
SFELA10M7HABO-BO 10.700 +30kHz within180 +40kHz 520 max. 5.0 +2.0dB 45 min.
SFELA10M7GAB0-BO 10.700 +30kHz within230 +50kHz 570 max. 3.0 +2.0dB 45 min.
SFELA10M7FABO-BO 10.700 +30kHz within280 +50kHz 650 max. 3.0 +2.0dB 45 min.
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
20
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
P61E7.pdf 01.10.17
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Frequency Characteristics
SFELA10M7KAB0-BO SFELA10M7) ABO-BO
0 8.00 0 = 7.00
1 7.50 1 6.50
2 7.00 2 6.00
23 6.50 $ 23 550 8
5 w e 5 a oe
g = E K
Sc 4 6.00 Q D 4 5.00 Q
<x o = O
5 5.50 5 4.50
6 5.00 6 4.00
7 4.
10.620 10.660 10.700 10.740 10.780 S f 10.500 10.600 10.700 10.800 10.900 ee
Frequency (MHz) Frequency (MHz)
SFELA10M7HABO-BO SFELA10M7GAB0-BO
ao > ao >
ao) O Ke) O
z B z B
S 3 S 3
5 = z =
5 ca 5 a
< o z o
3.00 2.50
10.500 10.600 10.700 10.800 10.900 10.500 10.600 10.700 10.800 10.900
Frequency (MHz) Frequency (MHz)
SFELA10M7FAB0-BO
ca >
koJ o
c D
2 2
S k
3 z
ez O
10.900
10.600 10.700 10.800
Frequency (MHz)
10.500
21
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Frequency Characteristics (Spurious)
SFELA10M7KAB0-B0 SFELA10M7) ABO-BO
T 3
S S
T w
=) =)
g 3
< <
70 70
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFELA1OM7HABO-BO SFELA1LOM7GABO0-BO
ao ao
Z Z
c =
2 ©
E E
= =)
c c
S S
< <
70 70
Saroy 9-700 10: 708 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFELA10M7FAB0-BO
Attenuation (dB)
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
22
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
CERAFIL® Wider Band-width Type
7.0+2.0
SFELA10M7 Series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
MARKING!
Ca
E Features
1. Realizes wider or narrower band characteristics not
obtained by conventional ceramic filters.
2. Temperature characteristics are the best available,
' ' . (1) : Input
the same as those of Murata's conventional ceramic SFELA10M7EA00-BO i oes
: . : Output
filters. Thus, even in the case of narrow band diri
filters, the center frequency is stable even if
temperature changes.
Pte
[MARKING
IT
(1) : Input
SFELA10M7DF00-B0O (2) : Ground
(3) : Output
(in mm)
Center Frequency (fo) Nominal 3dB Bandwidth | Attenuation | Insertion Loss | Spurious Attenuation
Part Number Center Frequency(fn
(MHz) (MHz) y(fn) (kHz) (kHz) (dB) (dB)
SFELA10M7EA00-B0 10.700 +30kHz - within330 +50kHz | 680 max. |within4.0 +2.0dB 30 min.
SFELA10M7DF00-B0 - 10.700 fn+175 min. 950 max. /within3.0 +2.0dB 20 min.
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
(fn) means nominal center frequency.
E Center Frequency Rank Code
30kHz Step 25kHz Step
10.64MHz+30kHz 10.650M Hz+25kHz
10.67MHz+30kHz 10.675MHz+25kHz
10.70MHz+30kHz 10.700M Hz+25kHz
10.73MHz+30kHz 10.725MHz+25kHz
10.76MHz+30kHz 10.750M Hz+25kHz
Combination A,B,C,D,E
Combination A,B,C
23
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Frequency Characteristics
SFELA10M7EA00-B0O SFELA10M7DF00-B0O
g 3 g 3
= O x 5
10.300 10.500 10.700 10.900 11.100 i ý 10.300 10.500 10.700 10.900 11.100
Frequency (MHz) Frequency (MHz)
E Frequency Characteristics (Spurious)
SFELA10M7EA00-B0 SFELA10M7DF00-B0
0
10
20
a A
7 E 30
z 5 40
z z
50 s
60
70
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
24
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers | EPT rir
CERAFIL® Narrow Band Type
10.0+2.0
SFELA10M7LFTA/KAHO, SFVLA/SFKLA series realizes
narrower band characteristics not obtained by
conventional ceramic filters. Besides, low spurious
and temperature characteristics is stable. This series
suits for European car-audio or AM up conversion use
that needs narrow band characteristics.
eae
MARKING
LEE
Felag
(M {CODE}
ee |
SFKLA10M7NF00-BO
r r
I MARKING I MARKING
|
[EAL
CM ICODE|
|
|
[EAS
Cc ICODE,
- l2.540.212.540.2
(1) : Input
SFVLA10M7MF00-BO Bec SFVLA10M7LF00-BO
inmm
7.02.0
(in mm) (1) : Input
SFELA10M7LFTA01-B0 ari SFELA10M7KAHO-BO (2) : Ground
(2) Ground (3) : Output
(3) Output (in mm)
nter F ncy (f Nominal B Bandwidth | Attenuation | Insertion L ious A j
Part Number Cente Say cy (fo) Center Frequency(fn) 3dB Bandwid enuatio sertion Loss | Spurious Attenuation
z) (MHz) (dB) (dB)
SFKLA10M7NF00-B0 10.700 +15kHz - 6.0 max. 24 min.
SFVLA10M7LF00-B0 - 10.700 fn+25 min. 200 max. |within5.5 +2.5dB 30 min.
SFELA10M7LFTA-BO - 10.700 fn£25 min. 30 min.
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
25
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Frequency Characteristics
SFKLA10M7NF00-BO SFVLA10M 7MFO00-BO
0 0 19.0
1 18.0
m 2 17.0
2 T ~
z R 16.0 8
3 E e
© 5 4 15.0 Q
<x S O
5 14.0
6 13.0
10
10.600 10.650 10.700 10.750 10.800 7 12.0
10.620 10.660 10.700 10.740 10.780
Frequency (kHz ) Frequency (MHz)
SFVLA10M7LF00-BO SFELA10M7LFTA01-B0
co >
B g T =
Cc Yn Ko) O
O =F oad (eb)
5 S = 2
> i £ =
D Q 5 =
ž 2 S n
= Oo
10. 10.64 10.7 10.7
10.620 10.660 10.700 10.740 10.780 909 DRA cee $799 TPR (OREN
Frequency (MHz) Frequency (MHz)
SFELA10M7KAHO-BO
co ~
ke) O
= (eb)
| n
2 3
S =
3 z
z O
10.620 10.660 10.700 10.740 10.780
Frequency (MHz)
26
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Frequency Characteristics (Spurious)
SFKLA10M7NF00-B0
0
10
20
T
— 80
§ 49
Š
50
60
70
9.700 10.200 10.700 11.200 11.700
Frequency (MHz)
SFVLA10M7LF00-BO
2
£
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
SFELA10M7KAHO-BO
a
Š
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
Attenuation (dB)
Attenuation (dB)
SFVLA10M7MF00-B0
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
SFELA10M7LFTA01-B0
9.700 10.200 10.700 11.200 11.700
Frequency (MHz)
2/
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
CERAFIL® For FM -IF Tuners
9.0 max.
SFELA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
NETET
I MARKING!
E Features
1. Little dispersion of amplitude characteristics and Ì
phase characteristics (G. D. T. characteristics). i | |
2. The SFELA10M7G_X series has G. D. T characteristics
and is useful for obtaining low distortion. SFELA10M7J AXE-BO
SFELA10M7F_L series, in these ceramic filters,
being in harmony with flatness of G. D. T.,
roundness of the amplitude and selectivity
characteristics, therefore, these ceramic filters
are suitable to high-grade stereo tuners. Even if
mismatching condition, they can keep little
distortion because of low Qm of ceramic material.
The SFELA10M7FAOG series is based on
SFELA10M7FA00/GA00/HAOO, and it obtains high
selectivity with low loss.
There is little dispersion of amplitude and
G. D. T. characteristics, and low distortion rate
can be obtained. SFELA10M7HA0G-BO
3. All products are inspected for symmetry and
roundness of amplitude characteristics, and the
flatness of G. D. T. characteristics.
(1) : Input
(2) : Ground
(3) : Output
(in mm)
9.0 max.
pepe
| MARKING |
SFELA10M7HAXD-BO
7.042.0
ace
MARKING,
(1) : Input (1) : Input
SFELA10M7GA0G-B0 (2) : Ground SFELA10M7GALM-B0 (2) : Ground
(3) : Output (3) : Output
(in mm) (in mm)
Continued on the following page.
i muRata
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
9.0 max 7.0+2.0
ON
[MARKING
Rape Sy
aa
| MARKING!
(1) : Input (1) : Input
SFELA10M7GAXA-B0 (2): Ground SFELA10M7FA0G-BO (2) : Ground
(3) : Output (3) : Output
inmm (in mm)
9.0 max.
TAR
I MARKING |
maa
CM icone!
(1) : Input
SFELA10M7GALP03-B0 SFELA10M7GAXX-B0 (2) : Graünd
(3) : Output
(1) : Input
SFELA10M7FALL-BO (2) : Ground
(3) : Output
(in mm)
Center Frequency (fo)| 3dB Bandwidth /|Attenuation| Insertion Loss |Spurious Attenuation GDT Bandwidth
Part Number
(MHz) (dB) (kHz)
SFELA10M7JAXE-BO 10.700 +30kHz within150 +30kHz 35 min. fot50 min.[within 0.15usec.]
SFELA10M7HA0G-BO 10.700 +30kHz within180 +40kHz| 520 max. 7.0 max. 40 min. fo+45 min.[within 0.5usec.]
SFELA10M7HAXD-BO 10.700 +30kHz within180 +30kHz} 530 max. 14.0 max. 33 min. fo+60 min.[within 0.15usec.]
SFELA10M7GA0G-BO 10.700 +30kHz within230 +50kHz| 600 max. 7.0 max. 40 min. fo+60 min.[within 0.5usec.]
SFELA10M7GALM-BO 10.700 +30kHz within230 +50kHz} 600 max. |within9.0 +2.0dB 30 min. fot60 min.[within 0.25usec.]
SFELA10M7GAXA-BO 10.700 +30kHz within220 +40kHz| 610 max. 12.5 max. 30 min. fo+80 min.[within 0.15usec.]
SFELA10M7FA0G-BO 10.700 +30kHz within280 +50kHz} 650 max. |within4.0 +2.0dB 30 min. fo+85 min.[within 0.5usec.]
SFELA10M7GALP03-B0 10.700 +30kHz within250 +50kHz| 650 max. 10.0 max. 30 min. fot65 min.[within 0.25usec.]
SFELA10M7GAXX-BO 10.700 +30kHz within250 +40kHz|} 670 max. 12.0 max. 25 min. fot110 min.[within 0.2usec.]
SFELA10M7FALL-BO 10.700 +30kHz within280 +50kHz} 700 max. |within7.0 +2.0dB 25 min. fot70 min.[within 0.25usec.]
Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
29
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Freq. Characteristics
SFELA10M7) AXE-BO SFELA10M7HA0G-BO
aay > ao >
2 g 2 8
S 2 S 2
g H S H
5 c 5 c
< o z ©)
10.500 10.600 10.700 10.800 10.900 oe? 7 10.500 10.600 10.700 10.800 10.900 Aap
Frequency (MHz) Frequency (MHz)
SFELA10M7HAXD-BO SFELA10M7GA0G-B0O
. i awe |
j a oe |
4.00 / :
ao TE on os
pe) O ke) O
= 3.75 2 = z
iS 3 5 3
S H S H
S 3.50 Q 5 Q
z o 5 0)
3.25
3.00
10.500 10.600 10.700 10.800 10.900 ete i 10.500 10.600 10.700 10.800 10.900 2.90
Frequency (MHz) Frequency (MHz)
SFELA10M7GALM-BO SFELA10M7GAXA-B0
4.00
3.75
3.50
oO > ao >
z 325 2 = 3
iS 3 5 3
5 = z =
E 3.00 Q S (m
< o = S
2.75
2.50
10.500 10.600 10.700 10.800 10.900 ae i 10.500 10.600 10.700 10.800 10.900 eae
Frequency (MHz) Frequency (MHz)
Continued on the following page.
30
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Attenuation (dB)
Attenuation (dB)
10.500
10.600
SFELA10M7GAXX-B0O
NI Continued from the preceding page.
E Freq. Characteristics
SFELA10M7FA0G-B0
10.700
Frequency (MHz)
10.800
10.900
10.500
10.600
10.700
Frequency (MHz)
E Spurious Frequency
Attenuation (dB)
Attenuation (dB)
SFELA10M7) AXE-BO
10.800
10.700
Frequency (MHz)
SFELA10M7HAXD-BO
10.700
Frequency (MHz)
G.D.T. (usec.)
G.D.T. (usec.)
Attenuation (dB)
Attenuation (dB)
SFELA10M7GALP03-B0
P61E7.pdf 01.10.17
10.600
SFELA10M7FALL-BO
Frequency (MHz)
G.D.T. (usec.)
G.D.T. (usec.)
Attenuation (dB)
Attenuation (dB)
10.500 10.600 10.700 10.800 10.900 159
Frequency (MHz)
SFELA10M7HA0G-BO
0
20
a
40
4
60
a ae
10.700
Frequency (MHz)
9.900 10.300
SFELA10M7GA0G-B0
10.700 11.700 12.700
Frequency (MHz)
8.700 9.700
Continued on the following page.
31
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E Spurious Frequency
SFELA10M7GALM-BO SFELA10M7GAXA-B0
3 g
E z
T T
x ž
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFELA10M7FA0G-B0 SFELA10M7GALP03-B0
0
10
20
oO oO
2 2
c 30 =
2 ©
T ©
=) =)
= 40 g
< <
50
60
70
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
SFELA10M7GAXX-BO SFELA10M7FALL-BO
oO oO
2 1
= c
2 ©
© w
=) =]
(= =
2 2
< <
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
32
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
muPRata
Ceramic Filters (CERAFIL®) for FM Receivers
CERAFIL® Three-Elements Type SFTLA Series
10.0+1.0
SFTLA10M7 series for FM-receivers are monolithic type
ceramic filters which use the energy trapped thickness
vibration-mode of the piezoelectric ceramic.
IMARKING
L: u
@ Features
1. It has an excellent shape factor, and it is
possible to obtain 1.5 times more excellent
selectivity than SFELA10M7 series (by detuning
+-300 or 400kKHZz).
2. Good performance of spurious suppression.
3. Having the same terminal pitch as the SFELA10M7
series, it easily replaces that series.
4. By replacing two SFELA10M7 series filters with one
SFTLA10M7 filter, more compact sets can be made.
5. Well-suited for 1-chip ICs.
(1) : Input
(2) : Ground
(3) : Output
SFTLA10M7HAO00-B0
inmm
10.0+1.0
SFTLA10M7GA00-B0
10.0+1.0
[MARK ING!
T
(1) : Input
SFTLA10M7FA00-B0 (2) : Ground
(3) : Output
in mm
PareNuber Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation
(MHz) (kHz) (kHz) (dB) (dB)
SFTLA10M7HA00-BO 10.700 +30kHz within180 +40kHz 550 max. within5.5 +2.5dB 50 min.
SFTLA10M7GA00-B0O 10.700 +30kHz within230 +40kHz 650 max. within6.0 +2.0dB 50 min.
SFTLA10M7FA00-BO 10.700 +30kHz within280 +50kHz 700 max. within6.0 +2.0dB 50 min.
Area of Attenuation : [within 40dB]
Area of Spurious Attenuation : [within 9MHz to 12MHz]
Center frequency(fo) defined by the center of 3dB bandwidth.
33
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Frequency Characteristics
SFTLA10M7HA00-BO SFTLA10M7GA00-B0
oO > ao >
D $] D g
aie © = ©
= Yn = Yn
AS) 3 2 =
S H S =
5 a S a
x 2 z 9
10.500 10.600 10.700 10.800 10.900 08 f 10.500 10.600 10.700 10.800 10.900 oa
Frequency (MHz) Frequency (MHz)
SFTLA10M7FA00-B0
T ~
Ke) O
= ©
= Yn
2 =
S E
S c
z O
10.500 10.600 10.700 10.800 10.900
Frequency (MHz)
E Frequency Characteristics (Spurious)
SFTLA10M7HA00-BO SFTLA10M7GA00-B0
0
10
20
co an
D m
=> 330 a
ao) c
$ S
J oO
D H :
Zz £
xt
50
60 hy,
A nl ivan ina A
70 L- f
8.700 9.700 10.700 11.700 12.700 8.700 9.700 10.700 11.700 12.700
Frequency (MHz) Frequency (MHz)
Continued on the following page.
34
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E Frequency Characteristics (Spurious)
SFTLA10M7FA00-B0
Attenuation (dB)
A oo MN
oO oO oO
8.700 9.700 10.700 11.700 12.700
Frequency (MHz)
35
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Lead Type CERAFIL® Test Circuit and Characteristics Data
E Test Circuit
(1) : Input
(2) : Output
(3) :Ground
(1) (2
) (3)
mae
Rg + R1 = R2 = 330Q
C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)
R1
RF
E Temperature Characteristics
+40 SFELA10M7GA00-B0
N Center frequency
I +20
©
2
©
5
>
—20 0 +20 +40 +60 +80
+2 Temperature (°C)
T Insertion loss
2
(=
2
5
5
>
—20 0 +20 +40 +60 +80
+40 Temperature (°C)
D 3dB Band width
<
(=
2
5
5
>
—20 0 +20 +40 +60 +80
Temperature (°C)
E Matching Conditions
eWhen using ceramic filters, it is most important to
match the input/output load to impedance 330 ohm
(only SFELA10M7DF00-B0 is 470 ohm matching).
Waveform symmetry is damaged when reactance
is added to the input/output load.
¢Two ceramic filters directly connected can be used
for high selelctivity. For reducing waveform
variation, it is recommended to input a buffer AMP
between ceramic filters.
36
Voltmeter
+40 SFELA10M7HAO0-BO
N Center frequency
I +20
©
2
©
5
>
—20 0 +20 +40 +60 +80
+2 Temperature (°C)
T Insertion loss
2
(=
2
5
5
>
—20 0 +20 +40 +60 +80
+40 Temperature (°C)
D 3dB Band width
<
(=
2
5
5
>
—20 0 +20 +40 +60 +80
Temperature (°C)
eĮhe SFELA10M7 and SFTLA10M7 series are of
input/output symmetric structure so that in theory
there is no input/output directionality. Actual
circuits may use different input/output loading
conditions (for example, mismatched impedance) or
capacitance load. In such cases, the waveform will
be a little changed by the direction of the
input/output of the ceramic filters.
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Lead Type CERAFIL® Characteristics Data and Notice
E Loaded Resistance and Waveform (Rg+R1=3300hm)
SFELA10M7GA00-B0
R2=2209 R2=3309
0 1.2 0 f
EE lg et EE ala
sot A [| J) [ig GF 8a IA | A lbs 3z
eat AV | FN | log E Zi £
T e e z
5 s- JI\I/ Il | hs g a D
< 6 0 2 < 6 2
b S S
£ 10.5 10.6 10.7 10.8 10.9 Oo f 10.5 10.6 10.7 10.8 10.9 Oo
Frequency (MHz) Frequency (MHz)
R2=5600 ox R2=1kQ ns
0 g 0 2
arl 3 a | 3
cS 2 ® 2.2 ©
5 3 E §3 E
S4 a S 4 2
& 5 Â S5 Â
< 6 = < 6 9
7 ç 7 =
10.5 10.6 10.7 10.8 10.9 o 10.5 10.6 10.7 10.8 10.9 o
Frequency (MHz) Frequency (MHz)
E Loaded Capacitance and Waveform (Rg+R1=R2=3300hm)
SFELA10M7GA00-B0
C=10pF a z
0 12 g 0 g
are aN ge Ž
2-2 : o Z2 ®
§ 3 o6 ÈE §3 =
Sy 04 3 arid is
5 5 02 Â S5 Â
<6 0 = <6 =
í 10.5 10.6 10.7 10.8 10.9 6 Í 10.5 10.6 10.7 10.8 10.9 ö
Frequency (MHz) Frequency (MHz)
0 12 -9 0 1.2 8
a 1 10 3 ad 10 8
= 2 08 2 2 2 08 g
6°93 06 E 5 3 06 E
5 4 04 #8 S 4 04 È
2 5 02 8 & 5 02 4
< 6 0u- 5 Te 0. =
10.5 10.6 10.7 10.8 10.9 5 i 10.5 10.6 10.7 10.8 10.9 Oo
Frequency (MHz) Frequency (MHz)
E Notice (Soldering and Mounting)
The component cannot be withstand washing.
E Notice (Handling)
1. Do not use this product with bend. The component chlorine content, in flow soldering.
may be damaged if excess mechanical stress is 6. In case of covering discriminator with over coat,
applied to it mounted on the printed circuit board. conditions such as material of resin, cure
2. The component may be damaged when an excess stress temperature, and so on should be evaluated well.
will be applied. 7. Accurate test circuit values are required to
3. All kinds of re-flow soldering must not be applied measure electrical characteristics. It may be a
on the component. cause of mis-correlation if there is any deviation,
4. Do not clean or wash the component as it is not especially stray capacitance, from the test
hermetically sealed. circuit in the specification.
5. Do not use strong acidity flux, more than 0.2wt%
37
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Ceramic Filters (CERAFIL®) for FM Receivers
Discriminators Chip Type CDACV Series
CDACV10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in wide
bandwidths.
2.6+0.3
i,
@ Features ~~
1. Compact and excellent mechanical strength.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number. — ee
3. Stable demodulation characteristics can be obtained Ee eaten,
without adjustment.
4. The MG type for wide bandwidths and the MC type for
narrow bandwidths are available.
5. Stable temperature characteristics.
6. We recommend kits : ceramic discriminator
CDACV10M7 series and "CERAFIL" SFECV10M7 of the
same frequency rank.
pare Number Center pres (fo) Pes E 3dB BW eal arai Output | Distortion Ic Detection Method
CDACV10M7GA001-RO 10.700 +30kHz fo+150 min. 55 min. Cx20029 | Quadrature
CDACV10M7GA016-RO 10.700 +30kHz 300 min. within60 to 90mV 0.9 max. | TA8122F | Quadrature
CDACV10M7GA046-RO 10.700 +30kHz 330 min. 280 min. 1.5 max. | LA1832 Quadrature
CDACV10M7GA069-RO 10.700 +30kHz 330 min. 80 min. Quadrature
CDACV10M7CA001-RO 10.700 +30kHz fo+150 min. 55 min. Quadrature
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
E Standard Land Pattern Dimensions
38
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
E CDACV10M7GA001-RO
Test Circuit
Frequency Characteristics
1000 100
AFC
tu
o AF OUTPUT 100 10
j=)
pi
D
LL
=
O
so Ò
N Vcc=+3.0V
=
= 10 1. 3
: n
a :
O C:F
1 0.
Input signal conditions
Input Level 100dBu
Mod. Freq. 1000Hz
Freq.Dev. +22.5kHz
10.4 105 106 10.7 108 109 11.0
Frequency (MHz)
$.S.G.
Recovered AF Output Voltage (mV)
Distortion (%)
—_
E CDACV10M7GA016-RO
Test Circuit Frequency Characteristics
VCC +3V DC Out AF Out 1000
100
100
AF Output 10
Distortion (%)
Recovered AF Output Voltage (mV)
1 T 0.1
Input signal conditions
Input Level 80dBu
Mod. Freq. 1000Hz
Freq.Dev. +22.5kHz
10.4 105 106 107 108 109 1
Frequency (MHz)
—_
0
E CDACV10M7GA046-R0
Test Circuit Frequency Characteristics
LA1832
(SANYO)
Distortion (%)
Recovered AF Output Voltage (mV)
Input signal conditions
10.7
Frequency (MHz)
Input Level 112dBu
Mod. Freq. 1000Hz
Freq.Dev. +75kHz
Continued on the following page.
39
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E CDACV10M7GA069-RO
Test Circuit Frequency Characteristics
CDACV10M7GZ069-B0 wee E Reg 1000
[3.3u
fin 1003 f, $2.2k oom hiou
F |
0OOOOSOOOOOOGOW ie
0292020202010020 0 DIAN IAI)
=
E€
®
©
00u | = 5 =>
v| 2 : > o
: OMUTI | S| EF | oon! 0.01u = S
1u = a an HE. FE. 2 6
AF OUT 6 5
O w 10 D
Ò Ò = istortion Q
©
0.022u| (3.3k VCC (3V) AFC IF IN a 5
0.022 3.3k ni Q
= avn :
C:F
1
Input signal conditions
Input Level 100dBu
10.4 105 106 107 10.8 10.9 11.0 Mod.Freq. 1000Hz
Frequency (MHz) Freq.Dev. +75kHz
Test Circuit Frequency Characteristics
Vcc 3V AF OUT AFC OUT INPUT
F 0 P S.S.G.(Rg=50) 1000
100
=
E€
©
D
£
$ g
2 5
= 10 =
O 2
Le D
< Q
ne)
©
D
Unit 5
R:Q 8
C:F
1
Input signal conditions
Input Level 100dBu
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Mod.Freq. 1000Hz
Frequency (MHz) Freq.Dev. +22.5kHz
40
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Chip Type Discriminators CDACV Series Notice
E Notice (soldering and mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
Gradual
Cooling
Temperature (°C)
i 60 PUUS Time (sec.)
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of 280+5°C for 3.0+0.5 seconds.
2. Wash
The component cannot be withstand washing.
E Notice (handling)
1. The Component may be damaged if exces mechanical [Component direction]
stress is applied to it mounted on the printed circuit Puthe
board. L L component
2. Design layout of components on the PC board to CA A — > LJ 4, ie =
minimize the stress imposed on the warp or flexure of the ae) nes which stress
board. acts.
3. After installing chips, if solder is excessively applied to [Component layout close to board]
the circuit board, mechanical stress will cause destruction |
resistance characteristics to lower. To prevent this, be oo Susceptibility to
extremely careful in determining shape and dimension 0000 0000 O le E OIGAN
7 of : A>C>B
before designing the circuit board diagram. Slit a
4. When the positioning claws and pick up nozzle are worn,
the load is applied to the chip while positioning is
concentrated to one positioning accuracy, etc. Careful
checking and maintenance are necessary to prevent
unexpected trouble.
5. When correcting chips with a soldering iron, the tip of the
soldering iron should not directly touch the chip
component. Depending on the soldering conditions, the
effective area of terminations may be reduced. the use of
solder containing Ag should be done to prevent the
electrode erosion.
6. Do not clean or wash the component as it is not
hermetically sealed.
7. In case of covering discriminator with over coat,
conditions such as material of resin, cure temperature,
and so on should be evaluated well.
8. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of mis-correlation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
41
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
CDSCA10M7 series forms a resonator on a piezo electric
ceramic sabstrate. In combination with ICs, this type
obtains stable demoduration characteristics in wide
bandwidth.
E Features —
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
| 1520.1 | 1.540.1 | (in mm)
3. Stable demoduration characteristics can be
obtained without adjustment.
4. Stable temperature characteristics.
5. Recommended for Pb free soldering.
Center Frequency (fo) Recovered Audio 3dB BW | Recovered Audio Output | Distortion
Part Number (MHz) (kHz) (mV) (% ) IC Detection Method
CDSCA10M7GF107-RO 10.700 (fn) fn+80 min. 52 min. 3.0 max. | TA31272F Quadrature
(fn) means nominal center frequency.
E Standard Land Pattern Dimensions
(in mm)
42
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
@ Test Circuit E Frequency Characteristics
Vcc (5.0V) Q AF OUT
0.01uF 1000
100
Recovered AF Output Voltage (mV)
Distortion (%)
S.S.G. X: CDSCA10M7GF107-B0
R: 1.2 [kohm]
C: open
Input signal conditions
Input Level 100dBu
Mod. Freq. 1000Hz
Freq.Dev. +40kHz
104 105 106 10.7 108 109 11.0
Frequency (MHz)
43
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Chip Type Discriminators CDSCA Series Notice
E Notice (Soldering and Mounting)
1. Standard Reflow Soldering Condition
(1) Reflow
200 bane Seceanseteeseens N
240 |-----------------/----- |
| Gradual
| Cooling
Temperature (°C)
150 |---
I I | a
a, =, Time (sec.)
(2) Soldering Iron
Lead terminal is directly contacted with the tip of
soldering iron of +280+5°C for 3.0 seconds+0.5 seconds.
2. Wash
The component cannot be withstand washing.
E Notice (Handling)
1. The component mounted on the PCB may be damaged if [Component direction]
excess mechanical stress is applied. Put the
2. Layout the components on the PCB to minimize the component
stress imposed by the warp or flexure of the board. eat
3. After installing components, if solder is excessively which stress
applied to the circuit board, mechanical stress will cause ACS:
destruction resistance characteristics to be lower. To [Component layout close to board]
prevent this, be extremely careful in determining shape
and dimension before designing the circuit board diagram. — [B Susceptibility to
4. When the positioning claw or pick up nozzle are worn, the 0000 C0000 SESS MMe orae
f of : A>C>B
excess load is applied to the components while Slit
positioning or placing are performed. Careful checking
and maintenance are necessary to prevent unexpected
trouble.
5. When correcting component's position with a soldering
iron, the tip of the soldering iron should not directly touch
the chip component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. The use of solder containing Ag should be
considerd to prevent the electrode erosion.
6. Do not clean or wash the component as it is not
hermetically sealed.
7. In case of overcoating the part, coating conditions such
as material, curing temperature, and so on must be
evaluated deeply.
8. Accurate test circuit values are required to measure
electrical characteristics.
It may be a cause of mis-correlation if there is any
deviation, especially stray capacitance, from the test
circuit in the specification.
44
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
muPRata
Ceramic Filters (CERAFIL®©) for FM Receivers
Discriminators CDALA Series
CDALA10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in wide
bandwidths.
E Features
1. Compact and excellent mechanical strength.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be obtained
without adjustment.
4. The MG type for wide bandwidths and the MC type for
narrow bandwidths are available.
5. Stable temperature characteristics.
6. We recommend combination : ceramic discriminator
CDALA10M7 series and "CERAFIL" SFELA10M7 of the
same frequency rank.
8.0+1.0
CDALA10M7G_ Series
TEIAI |
‘CODE:
8.0+1.0
CDALA10M7C_ Series
“EIAL!
‘CODE:
5.0+1.0
Freq. Rank (Color Dot)
(in mm)
Freq. Rank (Color Dot)
(in mm)
Pan Number Center pa (fo) aes 3dB BW tas sr Output Sen IC Detection Method
CDALA10M7GA001-BO0 10.700 +30kHz 345 min. 25 min. 0.6 max. | CX20029 | Quadrature
CDALA10M7GA016-B0 10.700 +30kHz 300 min. within60 to 90mV 0.9 max. | TA8122F | Quadrature
CDALA10M7GA018-BO 10.700 +30kHz 300 min. 60 min. Quadrature
CDALA10M7GA046-BO0 10.700 +30kHz 330 min. 280 min. 1.0 max. | LA1832 Quadrature
CDALA10M7GA048-BO 10.700 +30kHz 400 min. 700 min. 1.0 max. | LA1835 Quadrature
CDALA10M7GA092-B0 10.700 +30kHz 300 min. 60 min. Quadrature
CDALA10M7CA001-BO 10.700 +30kHz 242 min. 35 min. ; CX20091 | Quadrature
CDALA10M7CA005A-B0 | 10.700 +30kHz 100 min. 600 min. 6.0 max. | LA7770 Quadrature
CDALA10M7CA040-BO 10.700 +30kHz 130 min. 40 min. Quadrature
E Center Frequency Rank Code
CODE 30kHz Step 25kHz Step
D 10.64MHz+30kHz 10.650MHz+25kHz
B 10.67MHz+30kHz 10.675MHz+25kHz
A 10.70MHz+30kHz 10.700MHz+25kHz
C 10.73MHz+30kHz 10.725MHz+25kHz
E 10.76MHz+30kHz 10.750MHz+25kHz
Z Combination A,B,C,D,E
M Combination A,B,C
45
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Test Circuit Frequency Characteristics
AFC
tu 10
o AF OUTPUT
as AF Output
5 >
i E
D ®
LL D
S
= E Q
Ra Ş | z S
.0.Q, Ò Z
£ Vcc=+3.0V S S
= O O
3 Ro 3 j
O C:F S
D Distortion
oc
0.1
Input signal conditions
Input Level 110dBu
Mod. Freq. 400Hz
Freq.Dev. +22.5kHz
10.4 105 106 107 108 109 11.0
Frequency (MHz)
Test Circuit Frequency Characteristics
vec +3V DC Out AF Out
10
PS AF Output
>
E
®
D
S
© ~
a S
2 | :
= =
O Distortion 2
LL n
< A
O
©
D
>
9
ic
0.1
Input signal conditions
Input Level 80dBu
Mod. Freq. 1000Hz
Freq.Dev. +22.5kHz
10.4 105 106 107 108 109 11.0
Frequency (MHz)
Test Circuit Frequency Characteristics
1F in Vcc 3V ©DCout AF out
> O O 1000
oO
KR
100
Recovered AF Output Voltage (mV)
9
Cc
Ao)
O
10 D
Q
Unit
R:Q
C:F
Q
Vcc 3V
Input signal conditions
Input Level 80 dBu
Mod. Freq. 1000 Hz
Freq. Dev. +22.5 kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Frequency (MHz)
Continued on the following page.
46
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E CDALA10M7GA046-B0
Test Circuit Frequency Characteristics
1000
AF Output
100
100 DEDE 10
LA1832 (SANYO)
>
=
®
D
g
g Distortion p
2 ©
= =
O c
LL oO
z
g 10 og
D A
>
Unit 9
R:Q oc
C:F
1 0.1
Input signal conditions
Input Level 112 dBu
Mod. Freq. 1000 Hz
Freq. Dev. +75 kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Frequency ( MHz)
Test Circuit Frequency Characteristics
V
A 500
CSBLA456KE2ZF15 4L
33n
t
SS = 1599P 33n
3.3u l aF
AFCo—+ = AF Output
47 = + N O Rch
7T 15k 5k oLch 100 10
=
E
(eb)
D
T
300 G
o > >
75 = 2 D
IF-ING@ 1k? 1k E 3kg = 10 1 5
L “ye mm, 0.474 o =
th < a
5 A
©
o
i >
47n 10 CDALA10M7GA048 Unit a
ara b b R:Q z
REG. VCC(7V) C:F a
1 4 0.1
Input signal conditions
Input Level 112dBu
Mod. Freq. 1000Hz
Freq.Dev. +75kHz
104 105 106 10.7 108 10.9 11.0
Frequency (MHz)
Test Circuit Frequency Characteristics
DC OUT
500
100
=
E
©
D
T
S 3
3 5
E 10 i i a
E Distortion 5
n
< a
= 8
oe D
B 8
N Unit ko
N
R: Q {
IF-IN C:F
Input signal conditions
Input Level 80dBu
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Mod.Freq. 1000Hz
Frequency (MHz) Freq.Dev. +22.5kHz
Continued on the following page.
47
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Continued from the preceding page.
E CDALA10M7CA001-B0
Test Circuit Frequency Characteristics
VCC 5V AF Output AFC 1000 100
Ọ Ọ o IF in
=
©
E3
CX20090 (SONY)
paea m
ae g
=a 10 1 9
(æ) S t Ss x A
eee eT
s Unit
< : istorti
7 de Ò as R:Q Distortion
oO Ref. C:F
1 | 0.1
Input signal conditions
Input Level 110 dBu
Mod. Freq. 400 Hz
Freq. Dev. +22.5 kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0
Frequency (MHz )
Test Circuit Frequency Characteristics
5000 500
DC Bias ) ;
5V9 l —] o Demod.OUT
} m a 1000 100
S >
V4 8 È
S =
= D
© & ; ;
x Ş Distortion =
xt = °
JEL Ə $
o 5 c
O 100 10 £
T Om OF 57 S | E 3
D Q
D
>
QO
Unit D
R:Q a
C:F
10 1 7
Input signal conditions
Input Level 100 dBu
Mod. Freq. 1000 Hz
Freq. Dev. +75 kHz
10.6 10.7 10.8
Frequency (MHz )
Test Circuit Frequency Characteristics
VCC (3V) 1000 100
o DC-OUT z
— 100 10
®
©
TEA5710 = (PHILIPS) S
5 =
2 —
6 5
Uu pa
O
a a 10 1 5
ale 280 0.22u © a
a ?
50 8
Unit o
S.S.G. R:Q
C:F
1 0.1
Input signal conditions
Input Level 100 dBu
Mod. Freq. 1000 Hz
Freq. Dev. +22.5 kHz
(% )
Recovered AF Output Voltage (mV)
10.4 10.5 106 10.7 108 10.9 11.0
Frequency (MHz)
48
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Lead Type Discriminators Notice
E Notice (Soldering and Mounting)
The component cannot be withstand washing.
E Notice (Handling)
1. Do not use this product with bend. The component chlorine content, in flow soldering.
may be damaged if excess mechanical stress is 6. In case of covering discriminator with over coat,
applied to it mounted on the printed circuit board. conditions such as material of resin, cure
2. The component may be damaged when an excess stress temperature, and so on should be evaluated well.
will be applied. 7. Accurate test circuit values are required to
3. All kinds of re-flow soldering must not be applied measure electrical characteristics. It may be a
on the component. cause of mis-correlation if there is any deviation,
4. Do not clean or wash the component as it is not especially stray capacitance, from the test
hermetically sealed. circuit in the specification.
5. Do not use strong acidity flux, more than 0.2wt%
49
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Packaging
E Minimum Quanti
Part Number Taping ø180mm Ammo Pack Bulk
SFECS 2,000
SFELA 1,500 500
SFELB 1,500 500
SFVLA 1,000 500
SFKLA 1,500 500
SFTLA 500
CDACV / CDSCA 2,000
CDALA 1,500 500
E Chip Type CERAFIL® E Small Chip Type CERAFIL®
SFECV Series SFECS Series
z 40+0.15
o1.5 t83 2.00.05, _ 4.00.1 e ven accumulated
Chip Filter
7.3+0.01
5.5+0.05
12.0+0.2
Peeling strength
0.1~0.7N
<
Cover film
oo
P
o
0.30.05
2.02+0.1
_ a
User direction of feed
Part number marked side is always facing upside. User Direction of Feed - Part Number marked side is always facing upside.
The feeding holes side of cavity tape is always input terminal. - The feeding holes side of cavity tape is always input terminal. (in mm)
E Chip Type Discriminator E Chip Type Low-Profile Type Discriminator
CDACV Series CDSCA Series
Ta
O
+
LO
ae
a
1.75+0.1
>
5.5+0.05 |
4
5.50.5 ı
12.0+0.2
12.0+0.2
| | +0.1
4.0+0.1 @1.5 -0
——~ + lo Lo ee
The cover film peel ees = = S
strength force 0.1~0.7N . 3'max. H| H 6
40° Cover Film 2 ql 2
| === L = lL — 2l | Z — =e
A h Sy SAY ly Ly ||
Aa I I l | | |
Part number marked side is always facing upside. User Direction of Feed Part Number marked side is always facing upside Direction of Feed (in mm)
Continued on the following page.
50
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Packaging
Continued from the preceding page.
E Lead Type CERAFIL® SF_LA Series
Ah Ah
Item Code Dimensions Tolerance Remarks
Lead Length under the Hold Down Tape L1 3.0 min.
Length of Cat off 2.0 max. To distinguish the direction
Pitch of Components 12.7 +0.5
Pitch of Sprocket Hole (1) oa 12.7 +0.2
Length from Hole Center to Lead 3.85 +0.5
Length from Hole Center to Component Center P2 6.35 +0.5
Pitch of the Terminal (1) F 5.0 +83
Pitch of the Terminal (2) F1 2.5 +0.2
Slant to the Forward or Backward Ah 0 +1.0
Slant to the Left or Right AS1 0 +1.0
Width of Carrier Tape 18.0 +0.5
Width of Hold Down Tape Wo 6.0 min. Must not protrude to the carrier tape
Position of Sprocket Hole W1 9.0 +0.5
Gap of Hold Down Tape and Carrier Tape W2 0 i
iain pee ae Center of Sprocket Ho 18.0 405
Diameter of Sprocket Hole Do @4.0 +0.2
Total Tape Thickness t 0.6 +0.2
Pitch of Sprocket Hole (2) Po20 254.0 +1.5 The pitch of 20 sprocket holes
(in mm)
Continued on the following page.
gl
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Packaging
Continued from the preceding page.
WE Lead Type Discriminator CDALA Series
Ah Ah
Item Code Dimensions | Tolerance Remarks
Lead length under the hole down tape L1 3.0 min. —
Pitch of component P 12.7 +0.5
Pitch of sprocket hole (1) Po 12.7 +0.2
Length from hole center to lead P1 3.85 +0.5
Length from hole center to component center P2 6.35 +0.5
Lead spacing F 5.0 nee
Slant to the forward or backward Ah 0 +1.0
Slant to the left or right AS1 0 +1.0
Width of carrier tape W 18.0 +0.5
Width of hold down tape Wo 6.0 min. —
Position of sprocket hole W1 9.0 +0.5
EA ae downtape and W2 0 es Hold down tape doesn't exceed the carrier tape
mame w j so | os
Diameter of sprocket hole Do 24.0 +0.2
Total tape thickness t 0.6 +0.2
Pitch of sprocket hole (2) Po20 254.0 +1.5 The pitch of 20 sprocket holes
(in mm)
52
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
P61E7.pdf 01.10.17
Test Circuit of Ceramic Discriminator
Part Number IC Manufacturer IC
CDALA10M7GA001 Sony CX20029
CDALA10M7GA002 Sony CX20076
CDALA10M7GA004 Rohm BA4234L
CDALA10M7GA005 Rohm BA4230AF
CDALA10M7GA006 Toshiba TA7640AP
CDALA10M7GA007 Sanyo LA1260
CDALA10M7GA008 Toshiba TA7303P
CDALA10M7GA009 Toshiba TA7130P
CDALA10M7GA011 Panasonic AN7004
CDALA10M7GA012 Sony CXA1030P
CDALA10M7GA013 Panasonic AN7007SU
CDALA10M7GA014A Panasonic AN7006S
CDALA10M7GA015 Sanyo LA1816
CDALA10M7GA016 Toshiba TA8122AN/F
CDALA10M7GA017 Philips TEA5591
CDALA10M7GA018 Toshiba TA8132AN/AF
CDALA10M7GA019 Rohm BA1440
CDALA10M7GA020 Philips NE604
CDALA10M7GF021A Philips TBA229-2
CDALA10M7GA022 Sanyo LA1810
CDALA10M7GA023 Sanyo LA7770
CDALA10M7GF024 Philips TDA2557
CDALA10M7GA025 Telefunken U829B
CDALA10M7GA026 Sanyo LA1805
CDALA10M7GA027 Sony CXA1238
CDALA10M7GA027N Sony CXA1238N
CDALA10M7GA028 Telefunken U2501B
CDALA10M7GA029 Philips TBA120U
CDALA10M7GA030 Philips TEA5592
CDALA10M7GA031 Toshiba TA2003
CDALA10M7GA032 Sony CXA1343M
CDALA10M7GA033 Toshiba TA2007N
CDALA10M7GA034V Telefunken U4490B
CDALA10M7GA035 Philips TEA5594
CDALA10M7GA036 Toshiba TA2029
CDALA10M7GA037 Sanyo LA1830
CDALA10M7GA038 Siemens TDA6160X
CDALA10M7GA039 Toshiba TA8186
CDALA10M7GA040 Philips TEA5710
CDALA10M7GA041 Rohm BA4220
CDALA10M7GA042 Philips SA605
CDALA10M7GA043 Sanyo LA1831
CDALA10M7GA044 Siemens TDA6160-2X
CDALA10M7GA045 Toshiba TA2008A/AN
CDALA10M7GA046 Sanyo LA1832/M
CDALA10M7GA047 Philips SA626
CDALA10M7GA048 Sanyo LA1835/M
CDALA10M7GA049 Motorola MC13156
CDALA10M7GA050 Toshiba TA2022
CDALA10M7GA051 Siemens TDA1576T
CDALA10M7GA052 Motorola MC13173
CDALA10M7GA053 Panasonic AN72382
CDALA10M7GA054 Sony CXA1376AM
CDALA10M7GA055 Philips TEA5712T
CDALA10M7GA056 NEC uPC1391M
CDALA10M7GA057 Toshiba TA2057
CDALA10M7GA058 Toshiba TA2046
CDALA10M7GA059 Samsung KA2244
CDALA10M7GA060 Rohm BA1448
CDALA10M7GA061 Philips TEA5762/5757
Part Number IC Manufacturer IC
CDALA10M7GF062 Toko TK14581
CDALA10M7GA063 Samsung KA2292
CDALA10M7GA064 Samsung KA2295
CDALA10M7GA065 Samsung KA2298
CDALA10M7GA066 Rohm BA4110
CDALA10M7GA067 Rohm BA4240L
CDALA10M7GA068 Sony CXA1991N
CDALA10M7GA069 Sony CXA1538M/N/S
CDALA10M7GA070 Sanyo LA1150
CDALA10M7GA071 Toshiba TA7765
CDALA10M7GF072 Toshiba TA31161
CDALA10M7GA073 Motorola MC13158
CDALA10M7GA075 Sony CXA1611
CDALA10M7GA076 Sony CXA3067M
CDALA10M7GA077 Toshiba TA2111
CDALA10M7GA078 Sony CX1691M
CDALA10M7GA079 Sanyo LA1838/M
CDALA10M7GA080 Toshiba TA2104AFN
CDALA10M7GA080A Toshiba TA2104F
CDALA10M7GA081 Telefunken U4313B
CDALA10M7GA082 Toshiba TA2099N
CDALA10M7GA083 Sanyo LA1827
CDALA10M7GA084 Rohm BH4126FV
CDALA10M7GA085 Philips SA639
CDALA10M7GA086 Sanyo LA1833
CDALA10M7GA087 Motorola MC3363
CDALA10M7GA088 Toshiba TA8721ASN
CDALA10M7GA089 Samsung KA22425
CDALA10M7GA090 Samsung KA22901
CDALA10M7GA091 Samsung KA2297
CDALA10M7GA092 Toshiba TA2132
CDALA10M7GA092D Toshiba TA2132BP
CDALA10M7GA093 Sony CXA1111
CDALA10M7GA094 Sanyo LA1822
CDALA10M7GA095 Temic U2765B
CDALA10M7GA096 Philips SA636DK
CDALA10M7GA097 Matsushita AN6138SH
CDALA10M7GA098 Philips CAA3220TS
CDALA10M7GA100 Toshiba TA2149N
CDALA10M7GA100A Toshiba TA2149AN
CDALA10M7GA101 Sanyo LA1823
CDALA10M7GA102 Toshiba TA2142FN
CDALA10M7GA103 Samsung KB22902
CDALA10M7GA104 Rfmd RF2925
CDALA10M7GA105A Philips TEA5757HL
CDALA10M7GA106 Fujitsu MB15G611
CDALA10M7GF107 Toshiba TA31272FN
CDALA10M7GF108A Sanyo LA1225M
CDALA10M7GF109 Toko TK14588
CDALA10M7GA110 Dspo DSIRF21
Part Number IC Manufacturer IC
CDALA10M7CA0O01 Sony CX20091
CDALA10M7CA002 Toshiba TA/687P/F
CDALA10M7CA004A Motorola MC3356P
CDALA10M7CA005A Sanyo LA7770
CDALA10M7CA006 Philips TEA5591
CDALA10M7CA009 Toshiba TA7640AP
CDALA10M7CA040 Philips TEA5710
53
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Example of Appllied Circuit
E LA1140(Automotive Radio)
R7 200
) Q
C3 VRi C7 Cs
0.047 150k 0.047 0.047 Vref.
L2
+— () O
SFELA10M7HAAO-BO
R4 Re SFELA10M7HAAO-BO (16) (12) (9) 41) 43) R13
10k GF. 12k
T: , Q , fey
, 8
+
HHQ E Re 6 LA1140 Ton
= 3 pa P (SANYO)
garr R2 —
C4 C5
R2 C14
ik 0.047 x 2 22k 0.047
Ro V^
Rio |+ BS a
220k fe =
ay np a ob
2.24 Cis R C
2
47k 33p
E CXA1019M (Radio)
/ / /
/ / j
7 FM PF /FM OSC,
| “FM CERAFIL® CERAMIC DISCRIMINATOR
| ‘| (SFELA10M7FA00-B0) (CDALA10M7CA001-B0)
|
|
!
! BAND |SELECT
Yy |
FM DISCRI
|
|
TUNING RIPPLE
— — ——
FM
12 P | +
BPF (12) DETECTOR | | | METER FILTER
AM ANT / L
sat !
=> l
l! AM IF AF
(10) AMP VOL PRE/POWER ral SP
DETECTOR AMP
AM IF =
777
AM OSC ,
AM CERAFIL®
(SFULA455KU2B-B0)
No adjustment is needed the FM detection stage due to use the ceramic discriminator.
Continued on the following page.
54
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
Example of Appllied Circuit
Continued from the preceding page.
E TA8122F (Radio)
IS2236 100k 0.022uF
CSBLA456KE2ZF16-B0
32y
2 2
ES aÍ Q- 47
— S = oL
L ty | oR
OUT OUT 4.74
L R
(16)—(18) (14) (13
FM AM Phase} | Phase VCO ST TA8122F(TOSHIBA)
OSC | | OSC COM | |COM |
AM EM || | AMFM req Li Sey
i | MIX DET | | [MONO sw
AM AM M__|L EM_| [TUN] | St
MIX AGC i babe L DET rites LED
FM \3 Jam OMO. Gr ae) 1 (12)
MIX MIX AGC | Vec2 IFIN | IFIN | GND2
ro L
00 8 7 | 0.033
~
al 10pH SFULA455KU2B-BO SFELA10M7FA00-B0 CDALA ta & ai
à 10M7GA16-B0
“al pi
Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK®)
T2
55
Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested P61 E7.pdf 01.10.17
to approve our product specification or to transact the approval sheet for product specification, before your ordering.
ANote:
1. Export Control
(For customers outside Japan?
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
(For customers in Japan?
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require
especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.
() Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Power plant equipment
(5) Medical equipment
(6) Transportation equipment (vehicles, trains, ships, etc.)
@ Traffic signal equipment
Disaster prevention / crime prevention equipment
(9) Data-processing equipment
Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of May 2001. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product
specification or to transact the approval sheet for product specification, before your ordering.
5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.
Murata Manufacturing Co., Ltd. htto://www.murata.co.jp/products/
Head Office International Division
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:int\@murata.co.jp
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com