o Regulatory, Safety, and Environmental

o Regulatory, Safety, and Environmental Notices User Guide EFTA01220987 ob Copyright 2015-2017 HP Development Company. L.P. 8luetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Seventh Edition: March 2017 First Edition: August 2015 Document Part Number: 836859.007 EFTA01220988 About This Guide This guide provides regulatory, safety and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, desktops, thin clients, and personal workstations. To access the latest user guides or manuals for your product, go to http://www.support.hp.com. Select Find your product, and then follow the on-screen instructions. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. a, CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. ffi° NOTE: Text set off in this manner provides important supplemental information. iii EFTA01220989 iv About This Guide EFTA01220990 Table of contents 1 Regulatory notices for notebook and tablet computers 1 Accessing regulatory labels 1 Federal Communications Commission notice 1 Modifications 2 Cables 2 Products with wireless LAN devices or HP Mobile Broadband Modules 2 Brazil notice 3 Canada notices 3 European Union regulatory notices 3 Declaration of Conformity 3 Products Sold Before 13 June 2017 3 Products Sold After 12 June 2017 4 Products with radio functionality (EMF) 4 Restrictions for products with radio functionality (select products only) 4 Radio frequency bands and maximum power levels (select products only) 4 European telephone network declaration (Modem/Fax) 5 Ergonomics notice 5 Germany (English text) 5 Germany (Deutscher text) 5 Australia and New Zealand notice 5 China WWAN notice 6 Japan notice 6 Wireless LAN, Wireless WAN, and Bluetoothe certification markings 6 Mexico notice 6 Singapore wireless notice 7 South Korea notices 7 Thailand WWAN wireless notice 7 Taiwan NCC notices 7 Wireless LAN 802.11a devices 7 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices 8 Airline travel notice 8 User-replaceable battery notices 8 Factory-sealed battery notices 8 Laser compliance 8 Modem notices 9 Telecommunications device approvals 9 EFTA01220991 U.S. modem statements 9 U.S. modem declarations 10 Canada modem statements 12 Japan modem statements 12 New Zealand modem statements 12 Voice support 13 Power cord notice 13 Japan power cord notice 13 DC plug of external HP power supply 13 Macrovision Corporation notice 13 2 Regulatory notices for desktops, thin clients, and personal workstations 14 Modem notices 14 Telecommunications device approvals 14 U.S. modem statements 14 Canadian modem statements 15 Japanese modem statements 15 New Zealand modem statements 16 Voice support 16 Electromagnetic compatibility notices 16 Federal Communications Commission notice 17 Modifications 17 Cables 17 Products with wireless LAN devices 17 Australia telecom statement 18 Brazil notice 19 Canadian notice 19 European Union regulatory notices 19 Declaration of Conformity 19 Products Sold Before 13 June 2017 19 Products Sold After 12 June 2017 20 Products with radio functionality (EMF) 20 Restrictions for products with radio functionality (select products only) 20 Radio frequency bands and maximum power levels (select products only) 20 European telephone network declaration (Modem/Fax) 21 Ergonomics notice 21 Japan notice 21 Wireless LAN and Bluetooth certification markings 21 Mexico notice 22 vi EFTA01220992 South Korea notices 22 Taiwan NCC notices 22 Wireless LAN 802.11a devices 22 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices 23 3 Safety notices for notebook and tablet computers 24 Heat-related safety warning notice 24 Potential safety conditions notice 24 Battery notices 24 Headset and earphone volume level notice 25 Power cord notices 25 Brazil notice 25 Cleaning the keyboard 25 Travel notice 25 China safety notices 26 China: Altitude notice 26 China: Tropical warning notice 26 Norway and Sweden: Cable grounding notice for products with a TV tuner 26 fOliklitVglgORM 26 4 Safety notices for desktops, thin clients, and personal workstations 27 Important safety information 27 Installation conditions 28 Battery notices 28 Fan notices 29 Headset and earphone volume level notice 29 Laser safety 29 Power supply and power cord set requirements 29 Power supply class I grounding requirements 29 Brazil notice 30 Denmark 30 Finland 30 Norway 30 Sweden 30 Power supply requirements 30 For use in Norway 30 Power cord set requirements 30 Japan power cord requirements 31 Pinch hazard 31 TV antenna connectors protection 31 External television antenna grounding 31 vii EFTA01220993 Lightning protection 31 Note to CAN system installer 32 China safety notices 33 China: Altitude notice 33 China: Tropical warning notice 33 Germany acoustics notice 34 itnligitgiggtV7 34 5 Environmental notices for notebook and tablet computers 35 Electronic hardware, packaging and battery recycling 35 Disposal of waste equipment by users 35 Brazil alkaline battery disposal 35 Brazil hardware recycling information 35 ENERGY STAR° Certification (select models only) 36 Chemical substances 37 China environmental notices 37 China PC energy label 37 China restriction of hazardous substances (RoHS) 40 The Table of Hazardous Substances/Elements and their Content 40 Pa, ValtfitrAitgia 4A WE/tit 41 WOilfratlaiVAJIMIMA (RoHS) 42 INifitfitt4liRT39119 42 India restriction of hazardous substances (RoHS) 44 Information for European Union Commission Regulation 1275/2008 44 IT ECO declarations 44 Japan restriction of hazardous substances (RoHS) 44 Mexico Sustainable Energy Use Law 44 Turkey EEE regulation 45 Ukraine restriction of hazardous substances (RUNS) 45 Perchlorate material—special handling may apply 45 TCO Certified 45 6 Environmental notices for desktops, thin clients, and personal workstations 47 Electronic hardware, packaging and battery recycling 47 Disposal of waste equipment by users 47 Brazil alkaline battery disposal 47 Brazil hardware recycling information 47 ENERGY STAR° Certification (select models only) 48 Chemical substances 49 Mercury statement 49 Perchlorate material—special handling may apply 49 viii EFTA01220994 China environmental notices 49 China PC energy label 50 China restriction of hazard substances (ROHS) 53 The Table of Hazardous Substances/Elements and their Content 53 frA1114114/04M91)0MC 4ilett 54 Of It DtlaiPl fC I I (RoHS) 56 ION 56 India restriction of hazardous substances (RoHS) 58 Information for European Union Commission Regulation 1275/2008 58 IT ECO declarations 58 Japan restriction of hazardous substances (RoHS) 58 Mehitki zakon o uporabi trajnostne energije 58 Turkey EEE regulation 59 Omejevanje uporabe nekaterih nevarnih snovi (RoHS) za Ukrajino 59 TCO Certified 59 Index 61 ix EFTA01220995 X EFTA01220996 1 Regulatory notices for notebook and tablet computers This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Accessing regulatory labels Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be physically located on the bottom of the computer, inside the battery bay (select models only), under the removable service door (select models only), on the back of the display, or on the wireless or modem module. Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the system BIOS. g NOTE: Electronic labels are not available on all products. NOTE: Devices not for sale or use in the United States may not contain a FCC ID. To view electronic regulatory labels: 1. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. 2. Press 110 to enter Computer Setup. 3. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press enter. 4. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and then press OK. g NOTE: The list of available electronic label items varies depending on the computer model and installed devices. 5. To exit Computer Setup menus without saving your changes: Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. — or — Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency Accessing regulatory labels 1 EFTA01220997 energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to: HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 or call HP at 650-857-1501. To identify this product, refer to the part, series, or model number found on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. 2 Chapter 1 Regulatory notices for notebook and tablet computers EFTA01220998 Brazil notice Este equipamento opera em canker secundario, isto e, nao tem direito a protecao contra interferencia prejudicial, mesmo de estaciies do mesmo tipo, e nao pode causar interferencia a sistemas operando em carater primario. Este equipamento atende aos limites de Taxa de Absorcao Especifica referente a exposicao a campos eletricos, magneticos e eletromagneticos de radiofreqUencias adotados pela ANATEL. Ao operar o dispositivo a uma distancia muito proxima do seu corpo, utilize urn acessorio de armazenamento nao metalico para posicionar o dispositivo a uma distancia minima de 1,5 cm do corpo. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. a, WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. aiCAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co- channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. European Union regulatory notices Declaration of Conformity Products Sold Before 13 June 2017 CE Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: R&TTE Directive 1999/5/EC; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Brazil notice 3 EFTA01220999 Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Products Sold After 12 June 2017 Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality (select products only) II lI CAUTION: IEEE 802.11x wireless LAN with 5.15-5.35 GHz frequency band is restricted for indoor use only in all European Union member states. EFTA (Iceland. Norway, Liechtenstein), and most other European countries (e.g.. Switzerland, Turkey, Republic of Serbia). Using this WLAN application outdoors might lead to interference issues with existing radio services. CAUTION: Fixed outdoor installations for WiGig application (57-66 GHz frequency band) are excluded in all European Union member states. EFTA (Iceland. Norway, Liechtenstein), and other European countries (e.g. Switzerland, Turkey, Republic of Serbia). Radio frequency bands and maximum power levels (select products only) Radio Technology Maximum Transmit Power EIRP (mho Bluetooth; 2, 4 GHz 10 RFC; 13, 56 MHz 10 WLAN WI-Fl 802.11,c 2,4 GHz 100 WLAN WI-Fl 802.11x; 5 GHz 200 WWAN 4G LIE; 7001800190011800/2100/2600 MHz 1259 WWAN 3G UTMS: 900/2100 MHz 1259 4 Chapter 1 Regulatory notices for notebook and tablet computers EFTA01221000 Radio Technology Maximum Transmit Power ERP (MW) WWAN 2G GSM GPRS EDGE; 900 MHz 3467 WWAN 2G GSM GPRS EDGE; 1800 MHz WIGig 802.11ad; 60 GHz 3162 10000 NOTE: Ilse onty HP-supported software drivers and correct country settings to ensure compliance. European telephone network dectaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/ regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Ergonomics notice Germany (English text) When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use of VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur, which result in reduced readability. Germany (Deutscher text) Wird ein mobiler Computer für Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG (Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhängig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationären Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000 (freiwillige GS Zertifizierung) Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur für kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Bei mobiler Nutzung mit ungünstigen Lichtverhältnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschränkungen der Lesbarkeit der dargestellten Zeichen kommen. Australia and New Zealand notice This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Australia and New Zealand notice 5 EFTA01221001 China WWAN notice ffiNfit. : atillit#PAtetflitVfl, WitelrefMttgeXtrals411 -ftvintfr. 77-(ig% 11.1fleAl k` 'tAli+ 9isiMfiErt ralMartnazircti9E. Japan notice V-2 nit*0POVF0; ,98teititlaateto ZOONa. tatitTICED Id tiros/of, IVO UTIJU #16 L. flfaMtN*31*EttZLift5i)t RAMEI3Afilatt-)TELATZIMO6 -CToc, VCC I —B VCCI32-1 latigfra>ilfr L'Oalta, LUTIMti, L'ORIti9 citts5-1, EV 3 i*IgeilZiVOUTIStfrifli IMAM gl8E-Cratti&59ter. IIRMEEPHilza -iCILAIRUJIMUTTELI., VCCI — B SGHz t•ftEllt6WiiigifgaM:thWiftlfilcatt,tvi: o /1-4 :O41.%4.4-. ht91C0.011 -9- itissit4w-rs t: wvo,,* Wireless LAN, Wireless WAN, and Bluetooth® certification markings O4,O12, tki*MilireWifi I it ItI4cital -ralik*: tilifOrARS edit a L.-cm This product contains certified radio equipment. Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous "Accessing regulatory labels" section. --ifisopitwers, M±tit (e -5,-</k) nittfil e e e fOt < Mexico notice Declaracion para Mexico La operaci6n de este equipo esti sujeta a las siguientes dos condiciones: (1) es posible que este equipo O dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operaci6n no deseada. The regulatory model number for this product is on the regulatory label. 6 Chapter 1 Regulatory notices for notebook and tablet computers EFTA01221002 If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. The regulatory model number for this product is on the regulatory label. Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and ENS0361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. South Korea notices FrAj -8- AM we x*444417} 2,044:44 7},t101 aN.111°12:11- til.ett- ta -1-- alt-FVt12.*Alg-01 'AMEN 9.i`114. 7Fn}oloIA-1/-*1.5- , Al API A1-8-8}01 Vlafg• Alolol 2.5cm 01%91 7i el if isittiAl s . Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. tolleibrimmicautattUmnid fiatmaaat-ilia irniniarilvmatto Taiwan NCC notices Wireless LAN 802.11a devices 5.2% —5.33GmWstic itff2.,;:A Singapore wireless notice 7 EFTA01221003 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices fitM*-CANKft%tliggNiti* -FLIX SMAUNtifil-ZitatiliMat • Paitfl • MIAMMillaiTi ,41WEIWA1*- • iilitM*-MWW/JP: N;tfZflftRMA - M-F ttatillX1ItZWRTI4W,NRIA R+11*MiN {F. OR19.4TICRSII4 • Akast*Y„„± ifil4M4MirMill ifilitMati • INAttitiZfFMZ„„igtti a am* wonmEnmatimim • TIMRSWilltilAG KittetMEZTiff Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. Factory-sealed battery notices The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Laser compliance a WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation: • Do not try to open the module enclosure. There are no user-serviceable components inside. • Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. • Allow only authorized service providers to repair the unit. 8 Chapter 1 Regulatory notices for notebook and tablet computers EFTA01221004 This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. SO dated June 24, 2007. Modem notices a WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following: • Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. • Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. • Do not use this product to report a gas leak while in the vicinity of the leak. • Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. • If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. • Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAECIttitTXXXX. Provide this information to the telephone company if you are requested to do so. Modem notices 9 EFTA01221005 Applicable certification jack USOC = AMC. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by #tt are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the "Troubleshooting" section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long- distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer: 10 Chapter 1 Regulatory notices for notebook and tablet computers EFTA01221006 age re 1110 Ann POIVeY NE Lest Van Control Cabpa leswo. PA IMOD Micro 610• 7112.70” tgrendee•Frecom Supplier's Declaration of Conformity Reference Nurrber. Place of Issue: Date of Issue: Delphi D40 (revision AM5) Allentown, PA, USA 30fs November 2006 Agere Systems Inc. at 110 Amercan Parkway NE, Lehrgh Valley Central Canes. Mellow, PA 18109 in the United States of America, hereby certifies that the Modem, bearing labelling identification number US: AGSMIXIBDELPHI Garrotes wth the Federal Communications Commission's ('FCC') Rules and Regulations 47 CFR Pat 58 and the Administrative Council on Terminal Attachments CACTATadopted technical criteria TWEIAAS-968, 968-A, 968-A-1. 968-A-2 and 968-A-3 Telecommunications - Telephone Terminal Equipment-Technical Requiements for Connection of Terminal Equipment To the Telephone Network cal '.' Modem notices 11 EFTA01221007 Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below: ea A05-0413001 Mr m New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications: a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. b. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than S seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). 12 Chapter 1 Regulatory notices for notebook and tablet computers EFTA01221008 Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm'/ 18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice Nal: it, RIM flit *DK= -14* e Salt,/ le No PAIN WAWA= itotai trittfritti3lEt DC plug of external HP power supply O-C Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Power cord notice 13 EFTA01221009 2 Regulatory notices for desktops, thin clients, and personal workstations Modem notices A WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following: • Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. • Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. • Do not use this product to report a gas leak while in the vicinity of the leak. • Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. • If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. • Do not plug a modem or telephone cable into the RJ-45 (Ethernet network) jack. SAVE THESE INSTRUCTIONS. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAECItInTXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 14 Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations EFTA01221010 The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by #tt are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the "Troubleshooting" section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long- distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below: Modem notices 15 EFTA01221011 eA070107003 ilEl New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications: a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. b. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than S seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service. Electromagnetic compatibility notices This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be rest