SOFTWARE HOUSE From Tyco Security Products

SOFTWARE HOUSE From Tyco Security Products EFTA01224878 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. MI trademarks not owned by Tyco Security Products are the property of their respective owners, and are used with permission or allowed under applicable laws. Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your regional sales manager. Software version: 250 Document Number: UM-139 Revision Number: PO Release Date: December 2015 This manual is proprietary information of Software House. Unauthorized reproduction of any portion of this manual is prohibited. The material in this manual is for information purposes only. It is subject to change without notice. Software House assumes no responsibility for incorrect information this manual may contain. 2015 Tyco Security Products. MI rights reserved. EFTA01224879 Table of Contents Preface 11 How to Use this Manual 12 Finding More Information 13 Manuals 13 Online Help 13 Conventions Used in This Manual 14 Software House Customer Support Center 15 Telephone Technical Support 15 Before Calling 15 Chapter 1 - Introducing C•CURE ID 17 Overview 18 What's New 19 Enhancements in Version 3.4 19 Enhancements in Version 3.2 19 Enhancements in Version 3.1 19 Hardware Requirements 20 Supported Printers 20 Supported Cameras 21 Software Requirements .22 Display Properties for Badging Stations 22 How to Use C•CURE ID 23 Using Help 25 Chapter 2 - Setting Up a Badging Station 27 Registering C•CURE ID 28 Setting Up Permissions 29 Simultaneous Badging Stations 29 Setting Up Operator Permissions 29 Setting Up the Room 31 Ambient Lighting 31 Positioning the Camera 31 C•CURE 9000 C•CUREID User GukM 3 EFTA01224880 Printer Set-up for Fargo HDP5000 or DTC400e with Encoder 33 Chapter 3 - Setting Up C•CURE ID 35 Using C•CURE ID Badge Setup 36 Backing Up Your Images 36 Accessing C •CURE ID Badge Setup 36 Badge Setup Tasks 37 Badge Setup Definitions 38 Enrollment for Proximity Cards 40 Configuring Enrollment 40 How Batch Enrollment Works 40 Batch Enrollment Tasks 41 Configuring Batch Enrollment for Proximity Cards 41 Configuring Individual Enrollment for Proximity Cards 42 Configuring an Import Definition for Batch Enrollment 44 Setting Batch Printing Options 50 Batch Printing Setup Tasks 50 Accessing the Batch/Sheet Printer Dialog Box 50 Setting Up Batch Printing .52 Selecting a Batch Printer 52 Setting the Origin Offset for Badge Printing 53 Setting Up Batch Queue Mode 53 Batch Printing Definitions 54 Configuring a Sheet Layout 56 Sheet Layout Design Tasks 56 Configuring the Badge Sheet Layout for a Badge Printer 56 Custom Sheet Layout Templates 57 Saving a Custom Layout 57 Loading a Custom Layout 58 Using the Label Designer to Create/Modify a Custom Layout 58 Sheet Layout Configuration Dialog Box Definitions 59 Label Designer Dialog Box Definitions 61 Setting Printer Options 62 Badge Printer Configuration Dialog Box Definitions 62 Changing the Default Printer 63 Magnetic Encoding Options 64 Setting Magnetic Encoding Options 65 Magnetic Encoding Definitions 65 Configuring Portrait Capture Settings 68 Portrait Configuration Tasks 69 Setting the Height and Width for Graphics 69 Choosing a Graphic Format 69 Selecting a Capture Device for Portraits 70 Setting Up a TWAIN Device for Portrait or Signature Capture 71 4 C•CURE 9000 C•CURE ID User Guide EFTA01224881 Setting Up Import from File for Portrait Capture 72 Portrait Configuration Dialog Box Definitions 72 Signature Settings 74 Signature Configuration Tasks 74 Choosing Cropping Options for Signatures 75 Enabling Brightness/Contrast Adjustment 75 Specifying Capture Settings for Signatures 75 Selecting a Capture Device for Signatures 76 Configuring a Penware Tablet as the Capture Device 76 Configuring a Topaz Tablet as the Capture Device 77 Configuring Import from File as the Signature Capture Device 78 Signature Configuration Dialog Box Definitions 79 Configuring Biometric Capture Settings 80 C •CURE ID Biometric Configuration Tasks 80 Setting up a Bioscrypt Device 82 C•CURE ID Biometric Configuration Definitions 83 Chapter 4 - Smart Card Setup 85 Smart Card Overview 86 Supported Devices 86 The Smart Card Process 88 Smart Card Device Configuration 89 Smart Card Device Configuration Tasks 89 Accessing the Smart Card Device Configuration Dialog Box 89 Configuring a Smart Card Device 91 Configuring a Device or Printer 91 Configuration Tasks 91 Configuring a Smart Card Device or Printer 92 Configuring a Printer for Smart Card Enrollment and Programming 92 Configuring a Batch Printer for Smart Card Encoding 93 Testing the Encoder Connection 95 Smart Card Device Configuration Definitions 96 Smart Card Templates 98 Sample Descriptions of Smart Card Templates 98 Creating a New Smart Card Template 100 Editing a Smart Card Template 101 Configuring an iClass Smart Card Template 102 iClass Template Configuration Definitions 103 Configuring a DESFire Smart Card Template 104 DESFire Template Configuration Definitions 105 Configuring a MIFARE Smart Card Template 106 MIFARE Template Configuration Tasks 107 C•CURE 9000 C•CURE ID User Gulde 5 EFTA01224882 Create a New MIFARE Template 107 Enroll a Blank MIFARE Smart Card 107 Program a Smart Card Using Default MIFARE Read and Write Keys 108 Enroll a Smart Card Using Default MIFARE Keys 109 Program a Smart Card Using Custom MIFARE Read and Write Keys 110 Smart Card Keys 111 Smart Card Key Configuration 111 Smart Card Key Tasks 111 Accessing the Smart Card Key Dialog Box 112 Creating a Smart Card Key 112 Editing a Smart Card Key 114 Smart Card Key Definitions 116 Smart Card Key Dialog Box 116 New Key File Dialog Box 116 Smart Card Key Configuration Dialog Box 117 MIFARE Template Configuration Definitions 118 MIFARE Application Directory (MAD) Definitions 118 Sectors Definitions 119 Details Definitions 119 Keys Definitions 120 Data Definitions 120 Chapter 5 - Designing a Badge 123 The Badge Designer 124 The Badge Designer Panels 124 Accessing the Badge Designer 125 Badge Designer Menus and Toolbars 126 Using the Badge Designer 132 Creating a Badge Layout 132 Editing an Existing Badge Layout 133 Importing a Badge Layout 133 Exporting a Badge Layout 134 Saving Your Badge Layout 135 Exiting the Badge Designer 135 Sample Data 136 Configuring Sample Data 137 The Badge Layout Panel 138 Configuring a Badge Layout 139 Badge Layout Panel Toolbars 139 Badge Layout Panel Tasks 140 Adding Text to a Badge 141 Adding a Barcode to a Badge 142 Adding an Image to a Badge 143 Adding a Portrait to a Badge 144 Adding a Signature to a Badge 144 6 C•CURE 9000 C•CURE ID User Guide EFTA01224883 Moving and Resizing Objects on a Badge 145 Grid Preferences 146 Aligning Objects Using the Grid 146 Setting Front-to-Back Order for Objects 148 Deleting an Object from a Badge Layout 148 Adding a Border to an Object 149 Adding a Border to the Badge 149 Badge Layout Properties Panel Tabs 150 The Badge Layout Properties Panel 151 Badge Properties Panel Tasks 152 Badge Layout Tab 152 Badge Layout Tab Definitions 152 Mag Encoding Tab 154 Mag Encoding Tab Tasks 155 Properties Panel Background Color Tab 155 Properties Panel Borders Tab 157 Borders Tab Definitions 157 Setting the Badge Layout to One-sided or Two-sided 159 Setting the Badge Layout to Portrait or Landscape 159 Setting the Badge Size 159 Setting the Front or Back Image of a Badge 159 Setting the Badge Background Color 160 Encoding Magnetic Tracks 160 Adding Magnetic Tracks to a Badge Layout 161 Using a Magnetic Track for Access Control 162 Important Considerations for Magnetic Encoding 162 Setting Magnetic Stripe Encoding Formats 165 The Image Properties Panel 166 Accessing the Image Properties Panel 166 Image Properties Panel Tabs 167 Image Properties Panel Tasks 167 Image Source Tab 167 Image Source Tab Definitions 168 Background Detection Tab 169 Color Management Tab 170 Setting a Dynamic Image Source for an Image Object 171 Setting a Static Image Source for an Image Object 172 Setting Background Detection Properties 172 Setting Background Color for an Object 173 Setting Color Management Properties 174 The Portrait Properties Panel 175 Accessing the C •CURE ID Portrait Properties Panel 175 Portrait Properties Panel Tabs 176 Portrait Properties Panel Tasks 176 Setting a Sample Filename 177 The Signature Properties Panel 178 Accessing the C •CURE ID Signature Properties Panel 178 C•CURE 9000 C•CURE ID User Guide 7 EFTA01224884 Signature Properties Panel Tabs 179 Signature Properties Panel Tasks 179 The Text Properties Panel 180 Text Properties Panel Tasks 180 Defining a Boolean Expression for a Text Object 181 Setting Color and Font Properties for a Text Object 182 Setting the Text Background to Opaque or Transparent 182 Setting the Background Color of a Text Object 183 Rotating a Text Object 183 Setting Justification for a Text Object 184 Text Properties Text Tab 184 Text Properties Font/Color Tab 185 The Barcode Properties Panel 187 Barcode Overview 189 Setting Barcode Properties 189 Setting Barcode Caption Properties 190 Adding Static Text to a Barcode Caption 191 Adding Dynamic Text to a Barcode Caption 191 Barcode Formats 192 Barcode Properties Tab Definitions 193 Barcode Captions Tab Definitions 194 Expression Builder 196 What is an Expression? 197 Using the Expression Builder 197 Adding a Database Field 198 Adding a Function 198 Adding an Operator 198 Adding Text 198 Testing the Expression 199 Erasing the Expression 199 Undoing an Entry 199 Redoing the Most Recent Entry 199 Expression Builder Definitions 199 Expression Builder Functions 200 Expression Builder Functions 201 Expression Builder Operators 204 Expression Builder Operators 205 Sample Expressions 207 Concatenating Fields 207 Proper Case Name 207 Proper Case Name with Optional Middle Initial 208 Date Formatting with 4-Number Year 208 Date Formatting with 2-Number Year 208 Date Formatting with MM/DD/YY Format 208 Date Formatting with MM/DD/YYYY Format 209 8 C•CURE 9000 C•CURE ID User Guide EFTA01224885 Chapter 6 - Creating Badges for Personnel 211 Personnel Badging 212 Accessing Personnel Badging 213 Accessing Badging from the Personnel Dynamic View 213 Using Quick Search to Access Badging Functions 214 Using Advanced Search to Access Badging Functions 215 Using a Query to Access Badging Functions 216 Assigning a Badge Layout 217 Taking Portrait Pictures 218 Taking Pictures with a TWAIN Device 219 Using the Video Capture Dialog Box 219 Taking Signatures Using Signature Devices 223 Importing Existing Portraits or Signatures 225 Displaying Personnel or Signature Images 225 Enrolling Fingerprints 227 Bioscrypt Fingerprint Enrollment 228 Chapter 7 - Printing Badges 233 Previewing and Printing a Badge 234 Previewing a Badge 235 Printing a Badge .236 Printing Queued Badges .237 Batch Printing Badges 238 Queuing a Badge for Batch Printing 239 Individually Add Badges to the Batch Print Queue 239 Batch Print Badges from a Query 241 Batch Print Badges from a Dynamic View 243 Batch Print Manager 244 Batch Print Manager Context Menu 245 Batch Print Manager Definitions 246 Chapter 8 - Smart Card Programming, Enrollment, and Printing 249 Smart Card Programming and Enrollment 250 Using the Enroll/Program Smart Card Button 251 Using Print Badge for Smart Card Enrollment, Programming, and Printing 251 Using Batch Print Badge for Smart Cards 252 Performing Batch Enrollment for Proximity Cards 253 Performing Individual Enrollment for Proximity Cards 254 Smart Card Data Confirmation Form Definitions 256 C•CURE 9000 C•CURE ID User Guide 9 EFTA01224886 Index 257 10 C•CURE 9000 C•CURE ID User Guide EFTA01224887 Preface The C•CURE 9000 C•CURE ID User Guide is for new and experienced security system users who want to learn to use C•CURE ID for the C•CURE 9000 Security Management System. In this preface How to Use this Manual 12 Finding More Information 13 Conventions Used in This Manual 14 Software House Customer Support Center 15 C•CURE 9000 C•CURE ID User Guide Preface 11 EFTA01224888 How to Use this Manual How to Use this Manual Ibis manual is organized into the following chapters that provide information about C•CURE ID. Chapter 1: Introducing C•CURE ID Provides basic information about the badging option, including hardware and software requirements. Chapter 2: Setting Up a Badging Station Tells you how to enable C•CURE ID by registering it in the licensing program, and describes how to set up the software and image•capture environments. Chapter 3: Setting Up C•CURE ID Describes how to use the Badge Setup option on the Administration Client application to customize C•CURE ID for your site. Chapter 4: Smart Card Setup Describes how to set up Smart Card devices and Smart Card templates for programming and enrolling Smart Cards. Chapter 5: Designing a Badge Describes how to design a badge with C•CURE ID. The chapter explains how to configure portraits, images, text, barcodes, and magnetic stripes on a badge layout. Chapter 6: Creating Badges for Personnel Describes how to perform badging functions such as portrait, fingerprint, and signature capture using C•CURE ID. Chapter 7: Printing Badges Describes how to preview and print badges for personnel records. Chapter 8: Smart Card Programming, Enrollment, and Printing Describes how to perform Smart Card programming, enrollment, and printing. 12 Preface C•CURE 9000 C•CURE ID User Guide EFTA01224889 Finding More Information Finding More Information You can access C•CURE 900(1 manuals and online Help for more information about C•CURE 9000. Manuals C•CURE 9000 software manuals and Software House hardware manuals are available in Adobe PDF format on the C•CURE 9000 DVD. You can also access the manuals if you install the Adobe Acrobat reader and copy the appropriate PDF files from the DVD. See the C• CURE 9000 Installation and Upgrade Guide for more information on copying the C•CURE 9000 manuals to your system. The available C•CURE 9000 and Software House manuals are listed in the C•CURE 9000 Getting Started Guide Product Guides and Help section, and appear as hyperlinks in the online.pdf file on the DVD. If you copy the manuals folder from the DVD, you can click on any manual listed in online.pdf to open that manual. These manuals are also available from the Software House Member Center website Online Help You can access C•CURE 9000 Help by pressing Fl or clicking Ifelp from the menu bar in the Administration/Monitoring Station applications. C•CURE 9000 C•CURE ID User Guide Preface 13 EFTA01224890 Conventions Used in T his Manual Conventions Used in This Manual This guide uses the fol owing text formats and symbols. Convention Meaning Bold T his font indicates screen elements, and also indicates when you should take a direct action in a procedure. Bold font describes one of the following items: • A command or character to type • A button or option on the screen to press • A key on your keyboard to press • A screen element or name blue color text Indicates a hyperlink to a UR L, or across-reference to a figure, table, or section in this guide. Regular Irak font Indicatesa new term, or a book title. <text> Indicates a variable. The following items are used to indicate important information. NOTE TIP STOP Indicates a note. Notes call attention to any item of information that may be of special importance. Indicates an alternate method of performing a task. Indicates a caution. A caution contains information essential to avoid damage to the system. A caution can pertain to hardware or software. Indicates a warning. A warning contains information that advises users that failure to avoid a specific action could result in physical harm to the user or to the hardware. Indicates a danger. A danger contains information that users must know to avoid death or serious injury. 14 Preface C•CURE 9000 C•CURE ID User Guide EFTA01224891 Software House Customer Support Center Software House Customer Support Center Telephone Technical Support During the period of the Agreement, the following guideline apply: • Software House accepts service calls only from employees of the Systems Integrator of Record for the installation associated with the support inquiry. Before Calling Ensure that you: • Are the Dealer of record for this account. • Are certified by Software House for this product. • Have a valid license and current Software Support Agreement (SSA) for the system. • Have your system serial number available. • Have your certification number available. Hours Normal Support Hours Monday through Friday, 8:00 to 8:00 , EST. Except holidays. Emergency Support Hours 24 hours/day, seven days a week, 365 days/year. Requires Enhanced SSA'7 x 24- Standby Telephone Support (emergency) provided to Certified Technicians. Fur another customers, billable on time and materials basis. Minimum charges apply — See MSR P. Phone U.S. Puerto Rico U.S. Virgin Islands +1-800-392-2873 For other regions, see C•CURE 9000 C•CURE ID User Guide Preface 15 EFTA01224892 Software House Customer Support Center 16 C•CURE 9000 C•CURE ID User Guide EFTA01224893 Introducing C•CURE ID C•CURE ID is a photo badging system that provides imaging and badging technology for Software House Security Management Systems. In this chapter Overview 18 What's New 19 Hardware Requirements 20 Software Requirements 22 How to Use C•CURE ID 23 Using Help 25 C•CURE 9000 C•CURE ID User Guide Chapter 1 17 EFTA01224894 Overview Overview C•CURE ID is an optional software product for Software House Security Management Systems that provides imaging station and badging station capabilities. An Imaging Station is a C•CURE 9000 client PC with a video capture capability and a camera that is used to take photographs of personnel and store those photos in Personnel records for use on access card badges. A Badging Station is a C•CURE 9000 client PC that is used to design badge layouts and to print personnel badges to a PVC Badge Printer. An Imaging Station and a Badging Station can be combined on the same client PC. NOTE To capture images, you must purchase hardware that supports the TWAIN protocol. See Hardware Requirements on Page 20. 18 Chapter 1 C•CURE 9000 C•CURE ID User Guide EFTA01224895 Wears New What's New 1'1w C•CURE ID Badging Application, version 3.4, has the following new features. Enhancements in Version 3.4 ■ Support for the following new devices: Magicard RIO Pro printer, Fargo DTC4500 printer, SCM SDI 011 Contactless Interface (SCM Wedge), Videology 20K758USB-CL6, 24C738USB-CL8, and 20K758USBSYS cameras. See Supported Devices on Page 86. Enhancements in Version 3.2 ■ Enrollment for proximity cards on Fargo HDP 5000 printers. This function uses Smart Card configuration to define a proximity card template for the OMNIKEY CardMan PC/SC encoder on the Fargo HDP 5000 printer. See Enrollment for Proximity Cards on Page 40. Enhancements in Version 3.1 ■ Smart Card Programming and Enrollment allows you to program and modify MIFARE smart cards for C•CURE 9000 Personnel, and enroll MIFARE, iCLASS, and DESFire Smartcard credentials into C•CURE 9000 Personnel records. See Smart Card Overview on Page 86. ■ Smart Card Printing allows you to set up Smart Card printers to program and print Smart Cards individually or use the Batch Print Manager to program and print multiple cards. See Smart Card Device Configuration on Page 89 and Using Print Badge for Smart Card Enrollment, Programming, and Printing on Page 251. ■ Support for the SCM Microsystems Inc. SDI010 Contactless Reader. The SCM wedge device supports the PC/SC interface and includes a MIFARE reader and encoder. See Supported Devices on Page 86. ■ Support for the Fargo HDP 5000 printer with an OMNIKEY CardMan 5x21-CL 0 PC/SC interface encoder for MIFARE or iClass smart cards. See Supported Devices on Page 86. ■ Import and Export of badge layouts to/from C•CURE 800/8000 to/from C•CURE 9000. In addition, exported badge layouts can be used like templates because they can be exported from one system and imported into another. See Importing a Badge Layout on Page 133 and Exporting a Badge Layout on Page 134. ■ Badge sizes up to 11"x 11" inches (27.94 x 27.94 centimeters) are supported. See Setting the Badge Size on Page 159. C•CURE 9000 C•CURE ID User Guide Chapterl 19 EFTA01224896 Hardware Requirements Hardware Requirements Both Badging Stations and Imaging Stations must comply with the C•CURE 9000 minimum hardware requirements for a client workstation. See the C•CURE 9000 Data Sheet for client workstation requirements. In addition, the Badging Station requires the following hardware: • C•CURE ID Video Identification and Badging System Package, or equivalent: • Camera • Tripod • Rash • Cables • PVC Badge Printer (for example: Fargo, MagicCard, Nisca). See Supported Printers on Page 20. • Badging Camera (for example, Digi International V2 and VA,3, Videology). See Supported Cameras on Page 21 Supported Printers C•CURE ID supports the badge printers listed in Table 1 on Page 20. Table 1: Supported Badging Printers Printer Model Supported Drivers Windows XP Windows 2003 Windows Vista Windows 7 32-bit Windows 7 64-bit Windows 2008 32-bit Windows 2008 R2 64- bit Nisca 5350, 5350i, 5350m 0 El I e e p Fargo DTC 400, DTC550, DTC400e V 0 0 Fargo HDP600 ..0 e v V Fargo HOP 5000 V 0 V V El Fargo DTC4500 V e e v E v zi Magicard Tango 2e, Rio 2e, RIO Pro 0 0 V V V V El 1 Microsoft Vista is supported, but the user must either log in to the PC as an Administrator or run the Administration Workstation appli ation as an administrator. UAC must be turned off only when SMART Card encoding is being used. 20 Chapterl C•CURE 9000 C•CURE ID User Guide EFTA01224897 Hardware Requirements Supported Cameras C•CURE ID supports the following cameras: ■ Digi International Watchport/V2 USB digital camera. ■ Video Associates VA-3 USB digital camera. ■ Videology 20K758USB-CL6, 24C738USB-CL8, 20K758USB-SYS. NOTE Software House has qualified the Digi International Watchport/V2 USB digital camera and the VA-3 USB digital camera for use with the C•CURE ID badging station. The Digi International Watchport/V2 USB digital camera is not supported on systems with DEP (Data Execution Prevention) enabled. You must turn off DEP to use this camera. C•CURE 9000 C•CURE ID User Guide Chapter 1 21 EFTA01224898 Software Requirements Software Requirements The following are minimum software requirements for a C•CURE ID client: ■ The system must meet the requirements for a C•CURE 9000 client. See the C•CURE 9000 Data Sheet for more information. ■ The system must have the printer drivers for any installed badge printers. Display Properties for Badging Stations 1he Badging Station display settings should be set to Highest Color (32 bit) and 1024 x 768 pixels. To Set the Display Properties on Your Windows System 1. From the Windows desktop, click Start>Settings and select Control Panel. (On Windows XP, click Start>Control Panel). 2. Double-click Display. The Display Properties dialog box opens. 3. Click the Settings tab and check that Color quality is set to Highest Color (32 bit) and that the Desktop area is set to 1024 by 768 pixels. 22 Chapter 1 C•CURE 9000 C•CURE ID User Guide EFTA01224899 How to Use C•CURE ID How to Use C•CURE ID This section outlines the process of setting up and using C•CURE.1O with your C•CURE 9000 Security System. Table 2: How to Use C•CURE ID Task For More Information 1. Set up a Badging Station. Chapter 2. Setting Up a Badging Station • Setting Up the Room on Page 31 • Registering C•CURE ID on Page 28 • Setting Up Permissionson Page 29 2. Use C•CURE ID Setup to oonfigure the system badging and imaging options. Chapter 3. Setting Up C•CURE ID • Setting Batch Printing Optionson Page 50 • Configuring a Sheet Layout on Page 56 • Setting Printer Optionson Page 62 • Magnetic Encoding Optionson Page 64 • Configuring Portrait Capture Settingson Page 68 • Signature Settingson Page 74 • Configuring Biometric Capture Settingson Page 80 3. Use C•CURE ID Setup to configure Smart Card devices and printers. Chapter 4. Smart Card Setup • Smart Card Overview on Page 86 • Smart Card Device Configuration on Page 89 • Configuring a Smart Card Device on Page 91 • Smart Card Templateson Page 98 • Configuring an iClass Smart Card Template on Page 102 • Configuring a DESF ire Smart Card Template on Page 104 • Configuring a MIFARE Smart Card Template on Page 106 4. Use C•CURE ID Badge Designer to design your badge layout. Chapter 5, Designing a Badge • The Badge Designer on Page 124 • The Badge Layout Panel on Page 138 • The Badge Layout Properties Panel on Page 151 • The Image Properties Panel on Page 166 • The Text Properties Panel on Page 180 • The Barcode Properties Panel on Page 187 • Expression Builder on Page 196 5. Use the Personnel Badging tab in the Personnel Record to create personnel badges and print them. Chapter 6, Creating Badges for Personnel • Accessing Personnel Badging on Page 213 • Assigning a Badge Layout on Page 217 • Taking Portrait Pictureson Page 218 • Taking Signatures Using Signature Devices on Page 223 • Importing Existing Portraitsor Signatureson Page 225 • Enrolling Fingerprintson Page 227 C•CURE 9000 CCURE ID User Guide Chapter 1 23 EFTA01224900 How to Use C•CURE ID How to Use C•CURE ID (continued) Task For More Information 6. Use the Personnel Badging tab in the Personnel Record to print badges. Chapter 7, Printing Badges • Previewing a Badge on Page 235 • Printing a Badge on Page 236 • Batch Printing Badgeson Page 238 7. Program, Enroll, and Print Smart Cards Chapter 8, Smart Card Programming, Enrollment, and Printing • Smart Card Programming and Enrollment on Page 250 • Using the EnrolVProgram Smart Card Button on Page 251 • Using Print Badge for Smart Card Enrollment. Programming. and P:.nt.nd c' Page 251 24 Chapter 1 C•CURE 9000 C•CURE ID User Guide EFTA01224901 Using Help Using Help The C•CURE ID Badge Setup dialog box and the C•CURE ID Badge Designer provide online help so you can get help information while you are using C•CURE ID. To Access Help From C•CURE ID Setup 1. Choose Options & Tools>Badge Setup from the C•CURE 9000 Administration Navigation pane application menus. The C•CURE ID Badge Setup dialog box appears. 2. Click Help or Fl in the C•CURE ID Badge Setup dialog box to open the C•CURE ID Help window. To Access Help From C•CURE ID Badge Designer 1. Choose >Personnel>Badge Layout from the C• CURE 9000 Navigation pane. The Badge Layout Selection dialog box appears. 2. Click New. The C•CURE ID Badge Layout dialog box appears. 3. Type a name for the Badge Layout in the Name field. 4. Click Launch C•CURE ID Badge Designer. 5. Click Help>Help Contents from the menu or Fl in the C•CURE ID Badge Designer to open the C•CURE ID Help window. C•CURE 9000 C•CURE ID User Guide Chapter 1 25 EFTA01224902 Using I le:p 26 Chapter 1 C•CURE 9000 C•CURE ID User Guide EFTA01224903 2 Setting Up a Badging Station Once you have installed C•CURE 9000 on your computer, you need to enable C•CURE ID by registering it in the C•CURE 9000 licensing program, set up permissions for access to the C•CURE ID software, and set up the image- capture devices for your badging station. In this chapter Registering C•CURE ID 28 Setting Up Permissions 29 Setting Up the Room 31 Printer Set-up for Fargo HDP5000 or DTC400e with Encoder 33 C•CURE 9000 C•CURE ID User Guide Chapter 2 27 EFTA01224904 Registering C•CURE ID Registering C•CURE ID Use the C•CURE Licensing program to update your license information and enable the C•CURE ID software option. Software House includes a license information document with your software. Ensure that you have the license information document for C•CURE ID before starting the licensing program. For additional information on running the License Program, refer to the C•CURE 9000 Installation and Upgrade Guide. When the Administration client application is running, you can view the number of simultaneous badging stations allowed by your license on the About C•CURE 9000 dialog box License tab by right-clicking the C•CURE 9000 System Tray Icon and choosing About from the context menu. If the number of simultaneous badging stations displayed on the License tab matches the number on your license information document, that means C•CURE ID is licensed and ready to run. You can run the licensing program whether or not the C•CURE server is running; however, you must restart the C•CURE 9000 Server Service and Framework Service for changes to the licensing program to take effect. To Register the Software or Update Your Licenses 1. Log in to an account with the appropriate privileges. See the C•CURE 9000 Installation and Upgrade Guide for information. 2. Click Start>Programs>SoftwareHouse>C•CURE9000>Licensing. After a few seconds, the C•CURE 9000 Licensing Program opens with the General Tab displayed. 3. In the Capabilities section, verify the Simultaneous Badging Stations allowed on your system. See the C•CURE 9000 license information document included in your software package for the number allowed. 4. Click 0 to close the Licensing Application. 28 Chapter 2 C•CURE 9000 C•CURE ID User Guide EFTA01224905 Setting Up Per IlliSSCIIS Setting Up Permissions The ability to use the imaging and badging features at a Software House C•CURE 9000 security workstation is affected by the following: • The number of badging stations specified in the product license for C•CURE 9000. See Simultaneous Badging Stations on Page 29. • Privileges assigned to each Operator in the Security Management System. See Simultaneous Badging Stations on Page 29. • Selections made in C•CURE ID Badge Setup. For example, Portrait, Fingerprint, and Signature settings must be configured in order to capture or import images, fingerprints, or signatures. Otherwise these options are unavailable in the Personnel Editor. Simultaneous Badging Stations Your license defines the number of clients that can run the C•CURE ID Badging Station components of C•CURE 9000 at the same time. For example, if you have two licenses, one client can be running the Badge Designer, while another could be performing image captures. If a third user tried to use a third client to print badges, they would be denied access. The number of Simultaneous Badging Stations is displayed on the About Box License tab. Setting Up Operator Permissions Before you can use any of the Badging functions, you must make sure your Operator account has the appropriate access Privileges to run C•CURE ID. An Operator who needs to create and edit Badge Layouts needs to have Edit, Delete, and New Permissions for Badge Layout. An Operator who needs to import/capture images and assign them to Personnel records needs to have Edit, Delete, and New Permissions for Images. An Operator who needs to Capture Portraits and Signatures, Print Badges, Enroll Fingerprints, Preview Badges, and Batch Print Badges needs to be Granted each of these Permissions under Personnel in Privileges. For more information on Privileges, see the C• CURE 9000 Software Configuration Guide. To Set Up Operator Permissions 1. In the C•CURE 9000 Admin client, click the Configuration button in the Navigation pane. 2. Choose Operator from the drop-down menu in Configuration. 3. Click aim to open a Dynamic View listing all Operators. 4. Select the Operator you want to configure from the list, and double-click that Operator to edit the record. 5. Note the Privileges assigned to this Operator. 6. Choose Privilege from the drop-down menu in Configuration. 7. Click am to open a Dynamic View listing all Privileges. C•CURE 9000 C•CURE ID User Guide Chapter 2 29 EFTA01224906 Setting Up Permissions 8. Select the Privilege(s) that the Operator was assigned, and review them to make sure that the appropriate privileges are enabled, as shown in Table 3 on Page 30. Table 3: Bodging Prtviege Settings Badging Functions Permissions Create arid edit Badge Layouts Badge Layout • Edit • Delete • New Import images Images: • Edit • Delete • New Perform Personnel Badging functions Personnel: Capture Portraitsand Signatures • Print Badge • Enrol Fingerprint • Preview Badge • Batch Print Badges 30 Chapter 2 C•CURE 9000 C•CURE ID User- Guide EFTA01224907 Setting Up the Room Setting Up the Room C•CURE 113 113 was designed for a typical ID badging office. Your office should include the following equipment for an ID setup: • A desk for the computer and printer • A chair without arms for your subject to sit in • A backdrop with backlighting • An appropriate power source for the computer, badge printer, and other peripherals Place the chair so that the backdrop is about 1 to 2 feet behind the chair, and provide some sort of even backlighting. There should be no shadows behind your subject. You might want to use a halogen light behind the chair to illuminate the backdrop. You might need a dimmer control for adjusting the intensity of the backdrop light. Avoid dark colored walls, and do not place the capture system in a dark colored cubicle, as this reduces the amount of lighting on your subject. Ambient Lighting Try to provide a space that ensures even and controlled ambient lighting. Avoid rooms with large open windows that allow sunlight to shine directly on your subject. Overhead fluorescent lighting casts a greenish tint that can affect images. To counter this, you can use color-corrected fluorescent tubes, available at most speciality lighting stores. Or, you should ensure that your subject is centered under the fluorescent lights, then provide enough portrait quality light to compensate. Positioning the Camera The distance of the camera from the subject is important. The type of camera and lighting you choose dictates the proper distance. The following list gives some guidelines for cameras with an f1.8 lens. For specifications, refer to the documentation that came with your camera. • Place the camera so that it is level or slightly higher than your subject's head. Tilting the camera up yields unflattering results. • Have the subjects turn their heads slightly to the left or right from the camera, to give a pleasing semi-profile image. Positioning the subject in this way also gives some depth to the portrait. Portrait Lighting The portrait lighting stand (not included) comes with a silver umbrella for reflecting light onto your subject. You can substitute a white umbrella and project the light through it for a softer light. Flash Lighting Place the stand for flash lighting approximately 5 to 6 feet from your subject. As in conventional photography, flash introduces a shadow behind the subject's head. To compensate, you should consider using a slave strobe flash, such as the Morris AC Slave. The slave strobe has an electric eye that causes it to fire when the camera flash goes off. Place the slave strobe on the back of the chair and aim it at the backdrop to C•CURE 9000 C•CURE ID User Guide Chapter 2 31 EFTA01224908 Setting Up the Room eliminate the shadow. Depending on how close the backdrop is, you may have too much light from the slave, which creates a flare. In this case, you should use a less powerful slave or place a piece of white paper over the strobe to reduce the light. NOTE If there is more than one capture system in the same room, all the slave strobes may go off when one of the main cameras flash. You may need to reorient the capture stations or place dividers between the chairs. To Ensure Consistent Lighting When Using a Flash • Turn the flash on at least five minutes before you start taking pictures, to ensure the flash is fully charged. The green light on the back of the flash means that the flash is 80% charged. • Set the thyristor control on the front of the flash appropriately. A recommended value to start with is 1/16. The M (manual) setting usually emits too much light. Portrait Backdrops The backdrop you use should be large enough to fill the window of your capture window. Generally, a 36 inch square is sufficient. The software recognizes any consistent solid color as background and processes the image to remove it or allow changes to another color. The only requirement is that the background color must be different from any color in the subject (face, clothes, etc.). Blue produces the best results. When you place a portrait in a badge layout, the software can examine the top-left and top-right corners of the image to determine the background color. If the color is not consistent across the top, automatic detection is not possible. The software can also scan the entire image, line by line, and change all the pixels that fall within the specified range to a solid known color. See Setting Background Detection Properties on Page 172 or information on background detection and adjusting the color range. NOTE If C•CURE ID detects the background color in a person's face or clothing, those pixels also change. For this reason, select a backdrop color that is not likely to be in a person's hair, eyes, face, or clothing. 32 Chapter 2 C•CURE 9000 C•CURE ID User Guide EFTA01224909 Printer Set-up for Fargo HDP5000 or DTC400e with Encoder Printer Set-up for Fargo HDP5000 or DTC400e with Encoder The Fargo HDP5000 or DTC400e printer with a MIFARE or iClass encoder requires additional drivers to be installed on the badging client workstation connected to the printer. These drivers must be installed in the correct order to support all of the Smart Card badging functions provided by the printer. To Set-up the Fargo HDP5000 Badge Printer with Encoder on Page 33 To Set-up the Fargo DTC400e Badge Printer with Encoder on Page 33 To Set-up the Fargo HDP5000 Badge Printer with Encoder 1. Perform printer installation according to the Fargo documentation. NOTE Do not plug in the printer-to-encoder USB cable until prompted to do so. 2. Download the most up-to-date driver for the Fargo HDP5000 printer by navigating to the Fargo Support website ) and selecting Printer from the What type of product drop-down list, then selectHDP5000 printer from the available choices and click Go. 3. Select HDP5000 Driver Windows to download the printer driver. 4. Navigate to the following webpage to download the OMNIKEY DRIVER: 5. Select OMNIKEY, then select the OMNIKEY 5125 Reader Board USB PROX encoder. 6. Choose the Operating System from the drop-down list for the system to which you will connect the printer. 7. Download the Synchronous API for HID OMNIKEY Readers (currently HID_OMNIKEY_Syrichronous_API_V1_ 1_1_4B.zip). 8. Download the OMNIKEY 5x2x Driver PC/SC Driver (currently OMNIKEY5x2x_V1_2_5_2.exe for 32-bit systems and OMNIKEY5x2x_V1_2_5_2_x64.exe for 64-bit systems). 9. Install the PC/SC driver for the Encoder (for example, OMNIKEYfix21_V1_2_5_2.exe) on your badging client PC. 10. Install the Synchronous API for the Encoder (HID_OMNIKEY_Synchronous_API_V1_1_1_4B.zip) on your badging client PC by extracting the contents of the ZIP file to your system and runnung setup.exe from the folder. 11. Install the Fargo HDP5000 printer driver (HPD5000DRV_2305.exe) on your badging client PC. 12. Plug in the HDP5000 USB cable as specified in the Fargo 5000 Printer installation instructions. 13. Restart your badging client PC. You can verify the installation by accessing Control Panel/System/ Device Manager on your badging client PC. The Encoder should be present in Device Manager under Smart card readers. To Set-up the Fargo DTC400e Badge Printer with Encoder Pertorzn printer installation according to the Fargo documentation. NOTE Do not plug in the printer-to-encoder USB cable until prompted to do so. C•CURE 9000 C•CURE ID User Guide Chapter 2 33 EFTA01224910 Printer Set-up for Fargo HDP5000 or DTC400e with Encoder 2. Download the most u to-date driver for the Fargo DTC400e printer by navigating to the Fargo Support website and selecting Printer from the What type of product drop-down list, then selectDTC400e printer from the available choices and click Go. 3. Select DTC400e Driver Windows to download the printer driver 4. Select OMNIKEY DRIVER LINK to download information about software downloads for the Encoder. This PDF file directs you to the OMNIKEY link at HID Global 5. Select OMNIKEY, then select the OMNIKEY 5125 Reader Board USB PROX encoder. 6. Choose the Operating System from the drop-down list for the system to which you will connect the printer. 7. Download the Synchronous API for HID OMNIKEY Readers (currently HID_OMNIKEY_Synchronous_API_V1_ 1_1_4B.zip). 8. Download the OMNIKEY 5x2x Driver PC/SC Driver (currently OMNIKEY5x2x_V1_2_5_2.exe for 32-bit systems orOMNIKEY5x2x_V1_2_5_2_x64.exe for 64-bit systems). 9. Install the PC/SC driver for the Encoder (for example, OMNIKEY5x21_V1_2_5_2.exe) on your badging client PC. 10. Install the Synchronous API for the Encoder (HID_OMNIKEY_Synchronous_API_V1_1_1_4B.zip) on your badging client PC by extracting the contents of the ZIP file to your system and runnung setup.exe from the folder. 11. Install the Fargo DTC400e printer driver (DTC400e DRV 1200.exe) on your badging client PC. 12. Plug in the DTC400e USB cable as specified in the Fargo 5000 Printer installation instructions. 13. Restart your badging client PC. You can verify the installation by accessing Control Panel/System/ Device Manager on your badging client PC. The Encoder should be present in Device Manager under Smart card readers. 34 Chapter 2 CCURE 9000 CCURE ID User Guide EFTA01224911 3 Setting Up C•CURE ID Setting Up C•CURE ID describes how to use the C•CURE ID Setup dialog box to specify settings for capturing, storing, and printing badges. In this chapter Using C•CURE ID Badge Setup 36 Enrollment for Proximity Cards 40 Setting Batch Printing Options 50 Setting Up Batch Printing 52 Configuring a Sheet Layout 56 Setting Printer Options 62 Magnetic Encoding Options 64 Setting Magnetic Encoding Options 65 Configuring Portrait Capture Settings 68 Signature Settings 74 Configuring Biometric Capture Settings 80 Setting up a Bioscrypt Device 82 C•CURE ID Biometric Configuration Definitions 83 C•CURE 9000 C•CURE ID User Guide Chapter 3 35 EFTA01224912 Using C•CURE ID Badge Setup Using C•CURE ID Badge Setup C•CURE ID Badge Setup lets you configure the settings for data, printers, capture devices, and badge design. The following sections provide more information about using C•CURE ID Setup. • Accessing C•CURE ID Badge Setup on Page 36 explains how to access C•CURE ID Setup. • Badge Setup Tasks on Page 37 provides links to the settings you can configure with C•CURE ID Setup. • Badge Setup Definitions on Page 38 gives more information about the fields and buttons on the C•CURE ID Setup dialog box. The choices you make in C•CURE ID Badge Setup affect the way you use C•CURE ID to: • Design badges - see The Badge Designer on Page 124 • Print badges - see Setting Printer Options on Page 62 • Capture images - see Configuring Portrait Capture Settings on Page 68 • Capture biometric data - see Configuring Biometric Capture Settings on Page 80 You need to view and adjust these settings to make sure that the devices and options for C•CURE ID are configured correctly for your system. Backing Up Your Images Images in C•CURE 9000 are stored in the C•CURE 9000 database and are backed up by C•CURE 9000 database backup. See the C•CURE 9000 System Maintenance Guide for more information. Accessing C•CURE ID Badge Setup The C•CURE ID Badge Setup dialog box lets you specify settings for image capture, magnetic encoding, batch printing, and your badge printer. To Access the Badge Setup Dialog Box 1. From the C•CURE 9000 Administration Client, choose Options & Tools>Badge Setup from the Navigation pane. The C•CURE ID Badge Setup dialog box appears, as shown in Figure 1 on Page 37. 38 Chapter 3 C•CURE 9000 C•CURE ID User Guide EFTA01224913 Using C•CURE ID Badge Setup Figure 1: C•CURE ID Badge Setup Dialog Box Catennt•eOn:• -TeCi :•teep• L<Catee, CCLOMID S.0,0140 00AbaSe Imp01/100.161t• PM, CACCuPe007.000n0 SoNe Desit. 50.1•9$ VAR.: 0 x 100 O rag • 20 C00tire f•05.0. CD SinatC•rd as0000•Dreell• Iot 2. See Badge Setup Tasks on I age 37 for more information about the tasks you can perform from C•CURE ID Setup. 3. See Badge Setup Definitions on Page 38 for definitions of the fields and buttons on this dialog box. Badge Setup Tasks Table 4 on Page 37 lists the tasks that you can perform using C•CURE. ID Badge Setup. Table 4: C•CURE ID Badge Setup Tasks To Perform this Task... See this Section... Set the Import/Export data path. Import/Exportdata path on Page 38. Set the Badge Unit of Measure (Inchesor MM). Unitson Page 38. Set the options for batch badge printing. Setting Batch Printing Optionson Page 50. Set the options for your badge printer. Setting Printer Optionson Page 62. Set the options for Magnetic encoding on badges. Magnetic Encoding Optionson Page 64. Set the options for Portrait image capture. Configuring Portrait Capture Settingson Page 68. Set the options for Signature data capture. Signature Settingson Page 74. Set the options for Biometricdata capture. Configuring Biometric Capture Settingson Page 80. Set the options for Smart Card programming and enrollment Smart Card Overview on Page 86. C•CURE 9000 C•CURE ID User Guide Chapter 3 37 EFTA01224914 Using C•CURE ID Badge Setup Badge Setup Definitions The fields and buttons on the C•CURE ID Badge Setup Dialog Box are defined in Table 5 on Page 38. Table 5: C•CURE ID Badge Setup Definitions Field/Button Description C•CURE ID Setup File C•CURE ID places the initialization file in the location specified here during installation. Any cha nges you make to C•CURE ID Badge Setup are written and saved to this file on your computer. Import/Export data path Enter the pathname of the directory from which you want to import badge layouts and/or store exported badge layouts. This directory is the location displayed when you select import or Export from the Badge Designer File menu. Units Inches x 100 MMx10 T h is option allows you to size badges in inches or millimeters. Select Inches x 100 or MM x 10. The d ispLay size of these measurements is relative to the pixels per inch displayable on your monitor. Mag Encoding Lets you specify a badge printer for cards with mag encoding. You can specify a printer and the Encoder prefix and suffix used for each magnetic track. To use magnetic encoding. your printer must have an encoding option. See Magnetic Encoding Options on Page 64. Batch Printing Select th is option if you want to specify batch printing of badges. See Setting Batch Printing Options on Page 50. Batching Options Thisoption onty appearswhen Batch Printing is selected. Opens the C•CURE ID Batch/Sheet Printer dialog box where you specify batch printing options. When you select Batch Printing. all printing is done in batch mode using the C•CURE ID Batch Print Manager. Settings that you make on thisdialog box supersede any settings you enter in Printer Options. See Batch Print Manager on Page 244 for more information about the Batch Print Manager. Printer Options Opens the C•CURE ID Badge Printer Co nt Igu rat ion dialog box where you speedy printer options. These settings onty appty if you do not select Batch Printing. See Setting Printer Optionson Page 62. Portrait check box Portrait Settings button Select this option to specify settings for the portrait capture device. Click Portrait Settings to set the options. See Configuring Portrait Capture Settings on Page 68. Fingerprint check box Fingerprint Settings button Select th is option to specifysettingsfor the fingerprint capture device. Click Blomotric Settings to set the options. See Configuring Biometric Capture Settings on Page 80. Signature check box Signature Settings button Select th is option to specify settings for the signature capture device. Click Signature Settings to set the options. See Signature Settings on Page 74. 38 Chapter 3 C•CURE 9000 C•CURE ID User Guide EFTA01224915 Using C•CURE ID Badge Setup C•CURE ID Badge Setup Definitions (continued) Fiekleutton Description SmartCard check box SmartCard Settings button Select thisoption to specify settings for your Smart Card device. CbckSmartCard Settings to set the options. See Smart Card Device Configuration on Page 89. Help Click Help to open the C•CURE ID Help system. See Using Help on Page 25. OK Click OK to accept the changes you have made to C•CURE ID Setup and return