Document text
PVLE Plus
aM/riU RECEIVER & CR PIRYER
WITH DETACHABIE ANTI-THEFT FACE
Owners Manual
PLEASE READ THIS MANUAL BEFORE USING
English
CONTENTS
Notes on Installation. 3
Precautions. 4
Wiring Diagram. 5
Location of the Control. 7
Basic Operation. 8
Radio Operation. 12
Location of the Remote Control. 18
Remote Control Operation. 18
Installation. 22
Specification. 24
Simple Troubleshooting Guide. 25
1
English
Welcome!
Thank you for purchasing our company multi media player!
To operate the unit correctly, please read the owner’s manual
carefully before using the unit. Keep these instructions and
retain this booklet for future reference.
2
Notes on installation
English
®=The unit is designed for 12V DC,
negative ground operation system
only. Before installing the unit,
make sure your vehicle is connected
to DC 12V negative ground electrical
system .
cF=The Negative batteryterminal
must be disconnected before
making connections,whichcan
reducedamaging the unit due
to short circuit.
(3= Be sure to connect the color coded
leads correctly according to the
diagram. Incorrect connections
may cause the unit malfunction or
damagethe vehicles electrical
system.
Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each other
or to the vehicle body .
(3=Do not block vents or radiator
panels. Blocking them will cause
heat to build up insideand may
result in fire.
After the completion of the
installation and begin to play
the unit( including replacing
the battery),pleasepressthe
RESET button on the front panel
with pointed objects(suchas
bail-point pen)to set the unit to
initial status .
3
Precautions
^ This unit can play the following discs only.
Type of disc Label on the disc
Recorder
material
Size of disc
CD+CDC
Sound only
12cm/8cm
Note: CD The unit is compatible with CD-RW. CD-R.PICTURE-CD version Disc.
® The manual conforms to Mp3 CD; If no or MP3 on some
modeIs, yon should ignore them. IVhiIe enjoying CD. the dispiay
will automatically identify the discs and indicate the corresponding words.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying out
any operation that could interfere
with your driving .
Do not work in extreme high or low-
temperature inside the vehicle is
between+60t and-20"C before
turning your unit on .
c;^ To enjoy optimum sound and images
while playing , handle the discs as
follows ;
- Handle the disc by its edge to keep the disc
clean, and do not touch the surface.
- Do not use your CDs with paste residue
or ink attached.
- Do not use CDs with labels or stickers
attached . which may leave a sticky
residue while beginning to pee! off
(Shown as picture)
- Clean the discs with an optional cleaning
doth . Wipe each disc from the center out.
(Sho wn as pictin'e)
Wiring Diagram
STANDARD CONNECT
English
Rear Speaker out
(Gray)
^y—amgj ^White{L) 0
-cnngis ^Red(R) @
^ Antenna
_c; ;;; | ^ From car
Aerial
To Power_ Blue
Antenna^
Subwoofer--
RearLchp ^ Green/Black
-
Front Lchp ^ White/Black
Speaker
White
e
Red
To ignition Key
1A
FUSE
Black
Neqative Ground
15A
Yellow
Memory back-up 12V
Violet/Black O ^Rear Rch
Violet @^Speaker
Grey/Black Q ^Front Rch
Grey Speaker
\ Antenna Receptacle
) Output Socket (male)
I Output Socket (female)
^ Fuse Holder
@ Rear Speaker Out(L)
@ Rear Speaker Out(R)
Wiring Diagram
THE ESPECIAL CONNECT
English
J^Super
^rWoofer
20~80Hz
Super
Woofer
Rear Speaker Out
Note: 1 .adjusting the AMPiS
frequancy between
20-80HZ is the best
effect.
2.Super woofer is the
best for pre-AMP
3.After connceting
super woofer
0Turn on LOUD:
(2)Adjust BAS to 3-5d3
(dDAdujstTRE to S' 7dB
A Rear L
speaker
A Rear L
speaker
Front L
speaker
© Front L
speaker
^ 4 Q 40~60W speaker
@40 tweeter
@ 12 super woofer
O Match for tweeter
Green
! /black
Purple
Hi /black ^
1
1
Purple |-
]0 ^
j
i
f
J White
/black J
Gray ^
/black_ >
1_ L-
^ Speaker
_^ Front R
© Speaker
X
T
5
Location of the Control
English
1
Reset Button
Power Button
Volume Control
Setting the Sound
Characteristies
Loudness Button
P-EQ Button
LO/DX Seleetor
Time-Displaying &
Adjusting Button
Mute Button
Remote Control
Reeeptor
m Band Seleetor
Tuning/Scleeting
Traeks
Preset Stations/AMS
MO/ST Selector
Mode switch
Number Buttons
Eject Button
IQ CD Slot
IQ LCD Display
^ Release Button
LED Lamp
Basic Operation
English
Initial system start-up
1 .Operating the unit for the first
time or after replacing the car
battery,you must reset unit,pr¬
ess n (RES)button whit a poin¬
ted object (such as a ball point
pen)to set the unit to initial
procedure.
★ Note :when some errors occur in the
LCD display you can also pr¬
ess RESET button to resume
to normal And it will erase the
clock setting and some mem¬
orized functions.
Turning the Unit on /off
Vol/Bass/Tre/Bal(L-R)
/Fad(F-R)Selector
3.For Volume ControlH ,roatte,vol
kndob clockwise to increaes the
sound level,and rotate it anticlock
wise to decreaes the sound level.
4.Repeatedly press Q (SEL)button
to select the desired mode in the
following order:
BAS
-A TRE -|
BAL I
★ Note :After selecting the desired mode,you
can adjust the curren level by rotating
theg(VOL)knob.
★ Note :lf you don jtadjust HvOL) knob within
Sseconds after selecting the desired
mode the unitwill automatical! return
to the current mode being disp layed.
Press H(PWR) button to turn on
the unit ,and press it again to turn
off the unit.
BAL
★ Note lAfter the unit is off ,if the volume
level is higherthan it is in initial
setting ,it will resume,to initial
status;if it is lower than that In
initial status ,it will store in the
status which you set.
8
Basic Operation
English
Turning Loudness On/Off
S.PressH (LOU)button to increase the
low frequency .This can improve the
sensitivity for your ears And jLOUDi
appears in the LCD when the Loudness
mode is activated.(See the picture)
press it once more to shut down the
LOU function.
raKmri ne-t mKiaoimmt
Setting P-EQ
6.While lostening to the popular music
classic musec and rock music ,you
can adjust the sound quality to make
it perfect by pressingQ (P-EQ) button
the procedure is as follows.
Pop mode is selected whenH(P-EQ)
button is first pressed and jPOPj
appears in the display.
(Shown as picture)
,^°°«nrnTUi r«pmvi vn 03 ukub
^CLASSIC mode is selected when
pressingD (P-EQ)button at the
second time ,and jCLASjappears
on the LCD (Shown as picture)
rWPT*4 «-* «! m IOC ump
★rock mode is selected when
pressing Q (P-EQ) button at the
third time andjROCKjappears
in the display.(See wn as picture)
rO"tn»f7 ao-# vn m lk uis hp
iiisefiix-sEf*:*eBpl
★PressO(P-EQ) button at the forth
time to turn off the P-EQ system.
Note :Bass mode and Treble mode rerurn to
initial setting when P-EQsystem is on
jBASSjand jTREBLEjdisappear
LO /DX Selector
7.PressQ (LOG) button to select
strong or weak station reception
★it is set to LOG mode when g
(LOG)button is first pressed
iLOGjappears and only local
station is available (Shown as
picture).
9
Basic Operation
English
^ It is switched to DX mode when
B(LOC) button is pressed again
Both distance and iocal stations
can be received.
Note:Cl).The initial mode is DX mode,No,iDXi
appears in LCD .
i^J.Loc is functional only in selecting
stations,
Mute Function
9.PressH [MUT] button to cut down
the sound output,jlVIUTEiappears
in the LCD (Press it again),
to revert to previous volume level.
Displaying and Adjusting Time
8.Time DisplayingiPressB (DSP)
button and the current time is
displayed ,and it returns to orig¬
inal status a fter 5 seconds or
press the button again.
Time Adjusting:press and hold
(SEL)button until the two points
in the middle of the clock stop blin¬
king ,you can rotata g (VOL)knob
adjust hours and minutes.
Sensor
r -
IsliirnfifBi:--' j
1 11
- - — TIWW- .
111 L^L:lJI±^LjULjUI-lJ^\ \
r >
m
10.Receptor for the card remote
commander .(for remote control
version only).
Note: This window is used for the
unit with remote control,
function.without this function
you should ignore the operation
contents about remote control
function.
10
Radio Operation
English
Band Selector
I.PressU (BAND) button repeatedly
to select bands in the following order:
FMl —4FM2 —4FM3 —
-AM2^-AMI ^-
During CD modePLAY/ ►!
button to suspend the playback.
Manual /Automatic Tuning
-
M
nnawBmmnBHlI
_y
IE
2.Manual Tuning:pressiE +^Ho''M4 —
button continuosly to select a station
upward or downward respectively.
Automatic Tuning:press and hold
fE + or 1^ — button for more than
3 seconds ,the radio automatically
searches,a station upward or down
ward respectively and plays when
it finds a station.
xxxxxxxxxxxxxxxxxxxxx
Scanning/Memorizing
Statios Automaticaiiy
stored station 10 seconds respe¬
ctively which stored in IE (i-6)
number buttons when Aps mode
iis carried out,ilNT[appears on
display .(See th picture).you also
can press the corresponding nu¬
mber button or Aps button when
your desired station is charged
It starts playing that station,
Press and holdiE(APS) button for m-
ore than 3 seconds to activate aut¬
omatically memory storing function
,The radio automatically selects a
station and has it stored in any
one of the number buutonsfE (1-6)
★ Note: The unit can be stored up to 6 stations
for each band ,Regarding the function
of number button refer to IE number
buttons for details.
1 1
Radio Operation
MO/ST Selector
4.PressiE(ST) button to select M-
ONO mode or STEREOmode.
Stereo reception is charged w-
hen jSTjappears in the LCD ,
Andi Qiq>appears in the display
(See the pilture)
★ It is stitched to MONO mode
whenjSTjdisappears .
★ During the player mode .press
the button to swich left speaker
/right speaker /stereo.
Mode Selector
Press (MOD) button to select radio mode or
playback mode.when in radio .press (MOD)
button for 2 seconds to turn on/off CD
changer function.when in CD mode,press
(MOD) button for 2 seconds to turn on/off
ESP function.
English
Number Buttons
6.Number button can help you store
your favorite station by pressing any
one of the number buttons ,you can
follow the steps as below:
Press andiholdiany number button
|0(1-6)until CH appears in the LCD
display when receiving a station ,And
now the station is already stored in
the corresponding number button,
(See the picture)
You can store up to 18 FM stations
up to 12 AM statios.
★ Note: Working at 3 band for Europe ,AM
represents MW and LW.
12
CD Operation
English
« 5K « -X- X X- X X X X X X X X X X X X X X X
1 .While listening to (or watching) CD
just insert a Cds (with labeled side up)
intothe CD SLOTE ,the mechanism,
will automatically switch on If a Cds is
loaded press|B(MOD) button to start
the playing.
X X X X X X X X X X X X X X X X X X X X X
2.Pres^ to choose
your favorite track up ward or down w-
ard respectively ,Press and hold
fE oJ-^M ) Hi- button to fast
forwardor rewind the track up ward or
downward respectively.
Ladeled side up
Note: During LCD Mode press and hold
button to switch on /off
ESP function.
♦ While listening to (or watching)CD
just insert Cds into the CD SLOTiE
the mechanism will automatically
swith on And the menu on the disc will
display to select playing pictures or
music.
X X X X X X X X X X X X X X X X X X X X X
Selecting Tracks/F.F/REW
13
M
rD Operation
English
^ -X- X- X X X X X X X X X X X X X X X X X X
Playing Tracks Repeatedly
3.Press|EiRPT ClOibutton to
perform repeat playing function
when you need to repeat playing
the track you like
^Du ring CD version pressjRPT
J^^jbutton at the first time to
repeat playing the same track
i ^^apears (Shown as pi¬
cture),which indicates repeat
playing one track starts press
jRPT 1 ^ jbutton again to
stop repeat.
Scanning Tracks
Autonmaticallyf
X X X X X X X X X X X X X X X X X X X X X
Press; ^‘^‘^lUpDutton once more to
normal play back
★ Note: inT diesnjM/ork during playing MP3.
X X X X X X X X X X X X X X X X X X X X X
Playing Tracks in
Random Order
button ,and ; fEiEEbppears on the
display (See the picture),which ind¬
icates RDM function is carried out
,The unit plays any track at random
,Press RDM omce more to return to
return to normal playback mode.
4.During play back pressi^tVi GZp
button ,one of the number button
IQto play the first 10 seconds of
each track on the disc ,the display
will show jlNT, track number
and elapsed timei(See the pic¬
ture).which indicates INT func¬
tion is already activated,
★ Note: RDM doesnjM/ork during playing MP3,
X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X
14
English
CD Operation
« «■ «■« «■ «■ « « «■ »:■ «■« «■ «■ «■ «■« «■ «■ «
Pause the playback
6.During playback,pressDIf^'i^
button to suspend the playbackj^^^i
mark stops running in the display"^
,To return to normal play mode ,press
it again ,and j (^^Viark runs accor¬
dingly.
Note:Please use original disc for this product poor
quality disc might damage the lens If the product
automatically locked press (MOD) to change
to radio mode and press the EJECT button
for 3 seconds to eject the disc.
♦ Note: Pressjji [^T]J)utton not to eject disc during
suspending mode ,operate the function after
canceling suspend
X » -SC- X- X X- -sc- ^ « X « « X -^ X- x
Eject a Cds
Z.PressiB Eject button( e )to jejct the
disc .iOPENjwill appearon display.
15
-ocation of the Remote Contro
English
* ^ » » « « « » » « « X- » » JK « -»J « « 5« X- X X X X X X X X X X X X X X X X X X X
VOL. 7 89
SEL PBC 0/10 10
^VOL- BAND EQ
INT RPT
EQ j
( APS
1 ID3
£>
■<s
^LOU A
( OSD
1 M B P /
ST/L^
(loca^
n Power Switch
B Mode Switch
g Volume Control(Vol+)
Setting the Sound
B Characteristics
Q Playitng PBC (menu)
B Volume Control(VoI-)
D Band Switch(CD pause the playback)
B Mute Button
Timing/Selecting
B Tracks/F.F/REW(SEEK+)
^ Intr Playing
Dl Repeat Playing
1^ Random Playing
|EI Progran Playing
MO/ST Selector
Local /Distance/PAL
/NTS Switches
DSP
Playing Time-Setting
On screen Display
Loud
Tuning/Selecting
Tracks/F.F/REW(S-
-EEK)
Setting P-EQ
Memorizing statingons
Automatically
Number Buttons
Remote Control Operatior^^^^^HEng^
^ ^ ^ «•« « * « «■« * « * * x X- X- X- X- X
Replacing the Battery
if When the range of the operation
of the card remote control bec¬
omes shorter no functions while
operating Replace the battery
with a new button cell ,Make sure
the battery polarity before replace
1 .Pull out the Battery Holder while
pressing the Stopper0
2.Put the button-tyjpe battery (+)
mark up ward into the Battery Holder.
X X X X X X X X X X X X X X X X X X X X X
if 1 .Power Button
-Pressll ( C!) button to
turn On/Off the power
X X X X X X X X X X X X X X X X X X X X X
#2.Mode Swotch
-Press B ► button to select
radio mode or play back
mode During CD mode ,press
and hold B ^ button to switch
on /off ESP function.
#3.Volume Increasing/Decreasing
3.Insert the Battery Holder into the
Remote Control.
NoteiSome models are not equipped with remote
control you should ignore the contents about
remote control,
-Press
button to increase or decr¬
ease the volume level res¬
pectively.
★4.VOL /BAS/TRE/BAL/FAD
Selector
_Repeatedly pressQ(SEL)
button to select the desired
mode in the following order:
—4 BAS —4 TRE
4- BAL
Note : After selecting your desired mode ,you can
adjust the curent mode being displayed by
using(VOL+orVOL-)buttons ,when P-EQ
mode is activated press SEL button to s-
elect the modes,And Bass/Treble modeQ
are invalid.(shown as below)
X X X X X X X X X X X X X X X X X X X X X
1 7
X X X X X X X X X X X X X X X X X X X X X
Remote Control 0|i( i i n ii ii
^ ^ -)K * ^ «• -)K « «• ^ ^ ^ * ■)!(• «■ JK * * ■)«(•
★ 7.Band/systom switch
-During radio mode .press
to switch Receiving
Band.
-During the player mode .press
H]!^^ button to suspend the
Play back To return to normal
play mode press it again.
Duri ng CD mode .press
button to suspend the
playback.
^8.Mute Button
-PressE button to cut
down the sound output.press
it once more to resume the
previous sound level.
^ 9.Tuning /Selecting Tracks
FastRewind /Forward
-During radio mode .continously
press EH “^.^iror^^^^t+button
to manul search a station d-
ownward or upward respec-
tively:if press and hold
EME button for
more than 3 seconds .the
radio will automatically st¬
ation downward or upward
respectively unit it finds a
station.
-During th e pla ying mode .press
and hold CTE or^^iV
button to fast rewind or fast
forward for you to reach your
desired track quickly.when
d iscon tin uously, press
^ « « * 5K ^ ^ ^ ^
18
5K 5K ^ * « 5K JK * ^ * -X- X X X X X X X X X X
ElE Button .you can
Select your desired portion downward
or upward respectively.
★ 10.Intr Playing
ili Noteiplease refferto page
14 aboutthe specific
function.
X X X X X X X- X X X X X X X X X X X X X X
♦ .Repeat Playing
-During CD mode firstly presslll
(RPT)to repeatthe current track being
played:press it again to cancel the
repeating functional.
Note:ln CD mode The inital
procedure is repeat
playing all the tracks.
X X X- X X X X- X X X X- X X X X X X X X X X
Remote Control 0|i( i i n ii ii
■X «■ ^ » !« X X- ^ X ^ X- X X X X X X X X X X
^12.Random Playing
During the playing mode ,press|g SCN /RDM
button to play any track at random
(Viz .The unit plays tracks out of
turn)
#16.DSP
press and hold this button to
adjust to the best sound efiec
★ 18.play Time-setting.t.
# 20.P-EQ Button
-Notei^please Refferto page
9 about the specific function.
# Number Buttons
-During radio mode ,you can
select one of the 6 stored st¬
ation on each hand by pressing
any one of the number buttonH
-During CD mode you
can select any track directly
by usingg number button (O'-
10+). For example ,if you need
the fifeenth track ,you can fitst
press button 10+ and then
press button 5 ,the corresp¬
onding tarck (15)willbe played.
When button 10+is first pressed it works
as 10+it works as20+ when pressed at
the second time ,the third time....30+
and the like
★Ams Button
-Note: Q| Ams Button please
Reffer to page 12 about the
specific function,
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
19
Installtion
English
Mounting Example Q)
This mounting method is used for Japanese cars.
The actual mounting method should depend on
the types of the cars and the supplied.
Sforc small articles inplaces not ac-
-cessihle to children.
Install only with the supplied screws.
Installation varies depending on the
types of cars and supplied parts. You
should have the unit instailed hy
(ptalifled technician.
"Existing parts supplied-
to your car
DETACHING THE FRONT PANEL
Before delaching Ihe front panel. Be sure to
press @. Press @ ,then ture the front panel
to the level,slide it to the left, and pull it off
towards you.
REPLACING THE FRONT PANEL
PRECAUTIONS
First, insert the left side of the front panel
into the main unit. Push the right sidcof the
front panel until it loeks firmly into the main
unit, at one time, insert the right side of the
front panel into the main unit.
Do not toLieh the eontaets on the ront panel or
on the unit body, sinec this may result in poor
clcetrieal eontact, If dirt or dust get on the
eontaets, wipe them with a clean, dry cloth.
21
Specifications
English
General
Power Requirements...
Load Impedance.
Max. Power Output.
Tone Controls.
Dimensions.
Mounting Dimensions,
Weight.
CD Deck Section
Discs Played .
Video System.
Mounting Angle
Audio Section
Maximum Output level
Frequency Response.
Signal-to-noise Ratio...
Separation.
AM Tuner Section
Frequency Range.
IF Range.
Lfsable Sensitivity(-20dB).
FM Tuner Section
14.4VDC
50Wx4
.±8dB(Bass I OOHz, Treble I OKHz)
Approx. 192x 178x50mm(dxvvxh)
Approx. 169x 1 82x53mm(dxvvxh)
Approx. 1.75kg
.CD,CD-R,PICTURE-CD
AUTO/PAL/NTSC
,0to4-A30‘’
2Vrms(+/-3dB)
20 lo 20Khz
85dB
80dB
.522-l620(Europe/China),530-J710(U.S.A)
,450ICHz
.25dB
Tuning Range. 87.5-108(Europc/China),87.5-l07.9(U.S.A)
IF Range. io.7MHz
Lfsable sensitivity (-30dB).l5dB
Signal-to-noise Ratio. 60dB
Stereo Separation. 30dB(iKHz)
Frequency Response. 30~J5000Hz
Noie: Due to continuous product improvement, specifications and design are subject to change
without notice.
22
Simple Troubleshootong Guide
English
Problem
Cause/Solution
No power
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Some errors occur in the LCD or no function
when pressing the button.
'if Press the RESET button.
Unable to receive stations.
if Check and make sure whether the antenna is
inserted or the antenna is properly connected,
if so. insert the antenna or connect it properly.
Poor effect on receiving a station.
if Antenna may not be the proper length. Make
sure the antenna is fully extended or broken:
if broken. Replace the antenna with a new one.
^ The broadcasting signal is too weak.
^ The antenna is poorly grounded, eheck and
make sure the antenna is properly grounded
at its mounting location.
ACDs cannot be loaded.
★ A C D .S' is loaded in the mechonism.
The stereo indicator C2D is Hashing,
^ Tune in the frecjuency accurately:
^ The broadcasting signal is too weak.
(Set to /Ac MONO mode) (page 12)
No picture.
^ The C D.v is dirty or damaged..
The picture noise appears.
Note: !f any of the problem persist after check list had been made, consult your nearest service dealer.
Ne ver at te m pt to d is a ss em hie your un i t by yours efj.
23