Whynter FM-85G user manual

Survival, Water, Medical Field Manuals

Military Manuals

Document text

WHYNTER Portable Freezer 


MODEL# : FM-45G / FM-65G / FM-85G 



Congratulations on the purchase of a Whynter portable refrigerator/freezer. We trust that you 
will enjoy many years of trouble free use. Please read the instructions carefully before using 
your Whynter product. This book will provide you with information on how to operate and 
care for your Whynter product. 




SAFETY PRECAUTIONS 

Read all of the instructions before using this appliance. When using 
this appliance, always exercise basic safety precautions, including 
the following: 

• Do not use if the power supply cord is damaged. If damaged, it must be replaced 
by qualified technician/electrician. 

• This portable freezer is not intended for use by young children or infirm persons 
without supervision. Young children must be supervised to ensure they do not 
play with the appliance. 

• Ensure the freezer is unplugged before cleaning or if not in use. 

• To clean the freezer use only mild detergents or glass cleaning products. Never 
use harsh chemicals or solvents. 

• Do not use this portable freezer with an extension cord or power strip. Please 
ensure that the appliance is plugged directly into the electrical outlet. 

• When positioning the portable freezer, ensure that there is at least a 2” clearance 
at the sides and a 4” clearance at the back of the portable freezer. This will allow 
for adequate ventilation of heat from the back of the freezer. 

• Close the freezer lid immediately after putting in any items to maintain the 
internal temperature of the unit. 

• Avoid placing the freezer near external heat sources or direct sunlight. 

• Make sure the freezer is placed on a flat, level, and solid surface. 

• Make sure that the surface on which the freezer is placed is strong enough to 
hold the freezer once it is fully loaded with items. 

• The portable freezer is an electrical appliance. To avoid serious injury from 
electrical shock, do not operate the freezer with wet hands, while standing on a 
wet surface, or while standing in water. 

• Do not expose this appliance to rain or excessive moisture. 

• Do not turn the portable freezer upside down, on its side, or 45° or more off level. 

• Never pull the power cord to disconnect the unit from an outlet. Grasp the plug 
directly and pull it from the outlet. 

• Never lift or carry the freezer by the power cord. 

• Keep the power cord away from heated surfaces. 

• This portable freezer is designed for non-commercial use only. 

• Do not plug this portable freezer into the power socket before setup is completed. 

• An empty portable freezer can be dangerous for children or small animals. If 
disposing of the portable freezer remove gaskets, latches, lids and the entire 
door from your unused appliance so that children or small animals cannot 
become trapped inside. 

• If your model of portable freezer is equipped with a lock, be sure to keep the keys 
in a safe location. 

• Do not cut or remove the third prong (the grounding prong) from the power cord. 

• The cord should be secured behind the unit and should not be left exposed or 
dangling. 

• Do not move this portable freezer without securing the lid in a closed and latched 
position. 

• Performance may vary based on operational and ambient conditions. 


2 




TABLE OF CONTENT 


UNPACKING PARTS AND FEATURES.4-5 

PROPERLOCATION.5 

MOVEMENT AND INSTALLATION INSTRUCTIONS.5 

OPERATING YOUR PORTABLE FREEZER.6-8 

TEST-RUN.6 

UNDERSTANDING THE TEMPERATURE CONTROL SETTING.6 

TEMPERATURE ADJUSTMNET.7 

QUICK FREEZING.7 

FOOD STORAGE.7 

DEFROSTING AND DE-ODERIZING.8 

NORMAL OPERATING SOUNDS AND FUNCTIONS.8 

CLEANING AND MAINTAINING YOUR PORTABLE FREEZER.8-9 

TROUBLESHOOTING.9-10 


3 
















PARTS AND FEATURES 


Your portable freezer is supplied with all the accessories you need to enjoy 
refrigeration almost anywhere. Below is an image of the freezer features and 
standard accessories. 




1. Latch 

2. Insulated lid 

3. Wire baskets 

4. Side handle 

5. DC power cord 

6. AC power cord 

7. Drain plug 

























Proper Location 


• Position your portable freezer in a location where there is 
proper air circulation and electrical connections. 

• Keep the portable freezer away from heat and direct 
sunlight if possible. 

• This portable freezer is suitable for vehicle use and 
camping however, the appliance should never be 
exposed to rain. 

• This portable freezer should not be placed in a built-in or 
recessed area. It is designed to be freestanding. 

• The normal operation of the freezer depends on heat 
radiation from the condenser. For the initial use, remove 
all packaging and allow at least 6” of clearance around the perimeter of the 
freezer. 


Because this 
unit is 
compressor 
based, ample 
space is 
required 
around the unit 
to allow it to 
exhaust 
properly. 


Movement and Installation Instructions 


1. Remove all interior and exterior packaging. 

2. Position the freezer in a dry and well-ventilated place. Keep the freezer 
away from direct sunlight, heaters and corrosive gases/chemicals. 

3. Clean the interior surface with lukewarm water and a soft cloth. 

4. When inserting the AC power-cord into the power socket, make sure 
the power socket is a grounded 115V-AC / 60Hz socket. Also, make 
sure that the unit’s grounding prong has not being tampered with. 

Note: When inserting the DC power-cord, make sure the input is a 12V-DC / 

24V power source. 

5. When moving the freezer, always use both handles to the carry the 
unit as level as possible. This is in order to protect the compressor and 
the sealed system. 


5 







OPERATING YOUR 




Test-Run 


DC input power 

• When attempting to plug your portable freezer into a standard 12 V 
socket, the unit will not work if socket has a voltage of less than 10.4 V. 
The unit will restart when the voltage is 11.8V or greater. 

• When attempting to plug unit into a standard 24 V socket, the unit will not 
work if the socket has a voltage of less than 22.5 V. The unit will restart 
when the voltage is 24.2 V or greater. 


UNDERSTANDING THE TEMPERATURE CONTROL SETTING 


Your portable freezer uses a digital control system for adjusting the thermostat. 






—N 


temp. 


i adjust 



7 

5 O run C ) low 6 

oo 





4 3 


v_ 






1. SET: Set button - press this to set the desired temperature 

2. A: Button for increasing the temperature setting + 

3. T: Button for decreasing the temperature setting - 

4. FF: Fast Freeze button - this function quickly drops the temperature 

1. “Run” indicator: this will be red when the Fast Freeze function is on and 
green when the unit is running normally 

2. “Low” indicator: yellow indicator will flash when the power is too low 

3. LED display: shows the temperature in Fahrenheit (°F) 


6 










Temperature Adjustment 


1. When the freezer is plugged in to a power outlet, press the “Set” button. 

The LED will display the factory pre-set temperature of 0°F 

2. To adjust the temperature: 

a. Press the “Set” button again 

b. While the LED is flashing, press the “A” or “T” buttons to reach the 
desired temperature 

c. Once the desired temperature is set, the LED stops flashing. The 
current internal temperature will then be displayed. After the LED 
has stopped flashing, you can check the set temperature by 
pressing the set button again 

d. To change the preset temperature again repeat steps a., b. and c. 

Note: Do not use the refrigerator-freezer as a refrigerator when the ambient 
temperature is lower than 41 °F 


Fast Freeze Mode 


Press the “FF” button to run the freezer on the “Fast Freeze” mode. The Fast 
Freeze mode rapidly cools the unit to -8°F. The freezer will then maintain this 
temperature. 

Note: Do not run the unit on “FF” (fast freeze) for more than four hours, as this 
might adversely affect the refrigeration system. 


Food Storing 


• Fresh foods should not be stored together with frozen foods. 

• When the temperature is set below 32°F, do not keep glass-bottled drinks 
such as beer and lemonade, as the glass might shatter. 


7 





Defrosting and Deodorizing 


When the ice layer on the inner cabinet sides is over 0.2”, the defrosting 
operation should be performed to improve the refrigerating 
efficiency. To do this, follow these steps below: 

1. Turn off the power, and remove all items inside the 
freezer. 

2. Allow the ice to completely melt. 

3. Remove the drain plug and drain all water. Once the unit is defrosted and 
all the water has drained out, clean the interior with a soft rag before 
using the unit. 

Tip: To remove unpleasant odors place a piece of charcoal in the chest 


Never 
remove ice 
with a sharp 
object or 
screwdriver. 


Normal Operating Sounds and Functions 


• It is normal to hear gurgling sounds caused by the flow of refrigerant when 
each cooling cycle ends. 

• The surface temperature of the compressor can reach 158-194°F when 
running. 

• The noise emitted by the cooling fan on the condenser is a normal 
function. 

• It is normal for the fan in the power supply to run all the time. 


CLEANING YOUR 
PORTABLE FREEZER 


• Always disconnect the power supply before cleaning. Clean the inside 
of the cabinet whenever necessary using a solution of warm water and 
baking soda (1 tablespoon to every 2 liters of water). Dry with a soft 
cloth. 

• Do not use steel brushes or harsh detergents to clean the inner liner. 


8 






• Dirt from the condenser should be cleaned by a qualified technician 
when necessary. 


TROUBLESHOOTING 


Problem 

Cause 

Solution 

The compressor runs for 

1 to 5 minutes and 
stops. 

The voltage is not in the 
correct range. 

Switch off the power 
and restart when the 
power is normal. 

The compressor runs 
but the inner liner does 
not get cold. 

The refrigerant has 
leaked. 

Contact service 
department via email at 
[email protected] 

The system is blocked. 

The inner liner is very 
cold and the 
compressor runs 
continuously. 

The ice layer on the 
evaporator is too thick. 

Defrost the freezer 

The door is being opened 
and closed too 
frequently. 

The door should be 
opened as little as 
possible. 

The freezer is 
overloaded. 

Remove some products 
from the freezer. 

The condenser is not 
well-ventilated. 

Place the freezer in a 
well-ventilated place. 

The temperature sensor- 
tube is out of the 
evaporator or the 
controller is faulty. 

Contact service 
department via email at 
[email protected] 

The compressor does 
not run. 

The controller is faulty 
(the power indicator is 
not on). 

Contact service 
department via email at 
[email protected] 

The thermostat is set too 
high and the ambient 
temperature is too low. 

Set the freezer to a 
lower temperature. 

The freezer is noisy. 

The freezer is not level. 

Place the freezer on a 
flat and hard surface. 

The voltage is not in the 
correct range.. 

Switch off the power 
and restart when the 
power is normal. 


9 




ONE YEAR LIMITED WARRANTY 


This WHYNTER portable freezer is warranted, to the original owner within the 48 
continental states, for one year from the date of purchase against defects in material and 
workmanship under normal use and service. Should your WHYNTER portable freezer 
prove defective within one year from the date of purchase, return the defective part or 
unit, freight prepaid (within two months of purchase; after two months to one year, 
customer will be responsible for freight cost to Whynter’s service department), along with 
an explanation of the claim to Whynter Company. Please package the portable freezer 
carefully in its original packaging material to avoid damage in transit. Please retain 
original box and packaging material. Under this warranty, Whynter will repair or replace 
any parts found defective. This warranty is not transferable. After the expiration of the 
warranty, the cost of labor and parts will be the responsibility of the original owner of the 
unit. 

THIS WARRANTY DOES NOT COVER: 

- Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes. 

- Damage, accidental or other wise, to the Ice Maker while in the possession of a 
consumer not caused by a defect in material or workmanship; 

- Damage caused by consumer misuse, tampering, or failure to follow the care and 
special handling provisions in the instructions. 

- Damage to the finish of the case, or other appearance parts caused by wear. 

1) Damage caused by repairs or alterations of the ice maker by anyone other than 
authorized by the manufacturer. 

2) Freight and Insurance cost for the warranty service. 


To obtain service or information, contact 
Whynter Innovations Group via Email at [email protected] 

or 

call 866-WHYNTER. 


10