Document text
First fØ Mobile Technologies
In-Vehicle Mounting Solutions | Docking Stations | Install Services
tollfree 800.330.5399
phone 610.828.1492
fax 610.828.1195
email [email protected]
address
1013 Conshohocken Road, Suite 312
Conshohocken, PA 19428-0978
=
=
U
=P
O
D!
co
D
O
=A
Q
O
æ]
-+
D
=)
me
0)
table of contents
(click on a section below to jump to that page)
contact information 2
mobile system: at a glance al
installation services 5
docks and cradles 6-15
for Panasonic 6-7
for Dell 8-15
for universal use 16
tilt/swivel 17-18
top plate 19
poles 20
quality story 21
dedicated base mount selection 22-23
dedicated base mounts 24-35
universal base mounts 36-38
accessories 39-43
screen holders 39
console units 40-41
b ~u Pentax printer mounts 42
Tai power supplies 43
policies 4, a
warranty 44
company history 45
www.firstmobiletechnologies.com œ 1.800.330.5399 3
First Mobile Technologies” products are Interchangeable
and allow you to build a solution that best fits your needs.
A basic system consists of the following items: =
=
FirstDock™ or FirstCradle™ U
aj
FirstCradle™ is a secure device that locks your Sl
computer in place. O
D
Two kinds of cradles exist: S,
dedicated |cradle designed exclusively for a particular ©
model =
universal |cradle designed to secure and fit any ©
computer oO
FirstDock™ secures your computer into place,
while also providing inputs, or connectors for your
computer peripheral devices, such as a scanner, bar
code reader, keyboard, mouse, printer, etc.
all FirstDocks are dedicated
tilt/swivel
Attaches to the end of the top plate, allowing the
computer to pivot and tilt and position the keyboard
for user comfort.
top plate
Inserts into the top of the pole, providing a mounting
surface for a docking station or cradle. Additionally,
top plates allow the docking station to be moved side
to side for easier user access.
pole
Provides the necessary height for the mounting
system. Standard pole lengths are 9” and 14”. Poles
are made with sturdy 12-gauge poles and /-gauge
steel plates for bolting to the base.
base
Uses 7- to 11- gauge powder-coated steel—the
most durable in the industry. The base secures the
mounting solution to the vehicle.
Two kinds of bases exist:
dedicated | designed exclusively for a specific vehicle
universal | designed to mount to any flat surface, such
as the vehicle floor or console box
Most bases can be installed without drilling, using existing seat bolt patterns
www.firstmobiletechnologies.com œ 1.800.330.5399 4
| nN stal lati on Se rvI ces First Mobile Technologies’
nationwide installation service
enables us to install your solution
whenever and wherever you need it.
With the experience of more than
50,000 installations, First Mobile
Technologies has developed a level
of process and installation expertise
that is unmatched. In fact, we are
the only mobile technology company
that offers a comprehensive range of
services.
=
=
U
+
O
>
ez
D
O
=A
Q
O
=)
=
D
=)
mre
0)
project management
Installation projects can be complex and time-sensitive. Ås such, we offer
dedicated resources to manage projects from conception to completion to
ensure your fleet is returned to service as quickly as possible.
safety
We don't "tap in” to existing power sources that are used to power your critical
systems. We use separate and distinct wiring to power your mobile solution.
Its safer for the operation of your equipment and safer for you.
preassembly
Unlike our competitors, we can pre-assemble our mounting equipment so it
ships out to your location ready to go. This ensures the installation process
moved quickly and flawlessly.
train the trainer
We are happy to provide training services to enable your personnel to offer
installation training throughout your organization.
nationwide coverage
We can deploy our installation teams to your location, or we can coordinate an
install at one of our facilities.
www.firstmobiletechnologies.com œ 1.800.330.5399 5
Docks and Cradles
CF-19 Toughbook FirstDock™
also compatible with CF-18 Panasonic Toughbook
Part # FM-D-CF19
CF-30 Toughbook FirstDock™
also compatible with CF-29 Panasonic Toughbook
Part # FM-D-CF30
[for Panasonic]
ce
=
U
=e
O
D!
co
D
O
=A
Q
O
=)
tome
D
=)
mr
0)
Panasonic dock features
Durable Design
Engineered and tested to a military standard
(MIL-STD-810F), the benchmark for vibration
and crash resistance certification
Dock plate is made with 11-gauge steel
to withstand the toughest environment and
aesthetic powder-coated finish to hide finger
prints and scratches
Closes Completely
Laptop lid closes completely while docked
DCIDC power supply
Exclusively for in-vehicle use
Screen holder
Ensures computer screen remains in a fixed
position
Tilt-Swivel device
Vertically and horizontally rotates computer for
optimal positioning
Warranty
3-Year Standard Warranty on FMT In-Vehicle
docks
Full Port Replication
One simple connection provides access to 13
expansion ports including: VGA, DVI, S-Video,
Parallel, Serial, PS/2 (Mouse and Keyboard),
S/PDIF, USB 2.0 (x4), RJ-11, and RJ-45. RF
pass-thrus optional
Power/Charge Capabilities
While docked, the laptop will be powered and
will charge the internal battery
Key Lock System
Engages and secures the computer to the First
Mobile Technologies docking station. Dedicated
undock button and indicator provides quick, safe
undocking
Lock and easy release feature
Accessories
FMT offers a wide range of docking accessories
to complete your mobile technology
requirements. Includes a variety of in-vehicle
docking elements (power/charge options,
consoles, mounting hardware and other support
elements)
| Steel Dock Plate (page 7) is
www.firstmobiletechnologies.com
required for all Panasonic FirstDocks |
¢ 1.800.330.5399 6
Docks and Cradles [for Panasonic""]
CF-52 Toughbook First Mobile™ Docking Tray
Part # FM-DT-CF52
Full Port Replication
Designed for use with the Panasonic Port
Replicator (required), which can also be
purchased through your FMT salesperson
(Part #CF-VEB522M), the CF-52 Docking
Tray provides full access to USB connectors
(4), DisplayPort, RJ-45, serial, AC jack, power
button, cable lock slot, and slide release.
Warranty
3-Year Standard Warranty on all metal parts
Cc
=
U
r
(@)
D
eJ
D
(@)
=A
P
O
3
cP
CD
5
=F
T
Key Lock System
for theft prevention, added stability & security
CF-30 Toughbook FirstCradle™
Part # FM-C-CF30
Made with 11-gauge steel
for vibration resistance and safety and non-
glare surface finish for maximum in-vehicle
usability
Full access to Toughbook functionality
including all ports, card slots and drive bays
CF-19 Toughbook FirstCradle™
also compatible with CF-18 Panasonic Toughbook
Part # FM-C-CF19
Non-Glare Surface Finish
Ultra-strong, 11-gauge steel is powder-coated for minimal
glare and maximum durability
Rear Key Lock System prevents theft while safely holding
the Panasonic CF-18 Toughbook in place
A Secure Fit for both CF-18 and CF-19 Toughbooks
Steel Dock Plate
Sits below the Panasonic Port Replicator for the most
rugged support; required for all Panasonic FirstDocks.
rear
Computer Part #
CF 19 FM-DP-19
CF 28 / CF 29 | FM-DP-07
CF 30 FM-DP-07-2
www.firstmobiletechnologies.com œ 1.800.330.5399 7
Docks and Cradles
(FirstCradle also available for the E6400XFR Notebook: see page 12)
Part #'s: FM-D-XFR-E
FM-D-XFR-E-RF
FM-D-XFR-E-W/PS
FM-D-XFR-E-W/PS-RF
[for Dell™]
C.
=
U
FE
O
D!
=
D
O
—=4
©
O
>
(m
OD
>
—
o)
The new E-XFR FirstDock custom docking station includes several exclusive features:
option available.
(this feature only available on XFR models FM-D-XFR-E-RF and
FM-D-XFR-E-W/PS-RF) Provides external (vehicle
mounted) antenna connection capabilities (TNC) for
XFR notebooks with integrated WiFi (802.11) and/or
Broadband radios
a USB port in
the front of the dock (6 total), as well as
2 serial ports for greater convenience. Other available
ports include a network connector,
2 audio connectors,AC adapter, VGA connector, DVI
connector, paralell connector, eSATA connector,
E-monitor connector, and mouse and keybord
connectors
Tested to military standard (MIL-
STD 810F) and Standard of Automotive Engineers
(SAE J1455) — the ultimate benchmark for vibration
and crash resistance certification.
for added stability
for increased security
protects from sun glare,
smudges and scratches
provides maximum user space
in locked position
Made of heavy-gauge metal
to withstand the toughest environments
www.firstmobiletechnologies.
First Dock
[ E-Series FirstDocks Let Dell
Notebooks "Breathe Easy” ]
1.800.330.5399 8
Docks and Cradles [for Dell™]
E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstDock™
Part # FM-D-E6400
or # FM-D-E6400-W/PS
Durable and Functional Design
The new E-ATG FirstDock custom docking station includes the same dynamic features of the E-XFR model
(see page 8 for more details), however the E-ATG is not RF Pass Thru-compatible.
Internal Power Supply Option available for all Dell-dedicated E-Series FirstDocks (part # FM-D-XFR-E-W/PS
and #FM-D-E6400-W/PS)
Screen Holder (not pictured) included with all Dell E-Series FirstDock and FirstCradle XFR models.
Cc
=
U
r
O
D
e
D
(@)
=A
Q
O
3
re
CD
=
=F
T
- [New Safe-Release “Undock .
arid Go” ™ Mechanism] oser skeerne nd
When the key is turned and the
release button pressed, two
recessed, cushioned ejector pads
raise simultaneously on either
side of the connection, gently Functionality] rr."
releasing the computer from the Both XFR and ATG FirstDocks
E-Series FirstDock. The computer use one simple connection
remains on and active. that provides access to 15
expansion ports (including
1 front, 3 side, and 2 rear USB
ports).
[Dell™ E/Port Station
Options and Accessories
FMT offers a wide range of docking accessories to complete your mobile technology requirements.
Power options include the Hardwired DC power supply for the Dell Latitude E-Series (FM-PWR-DLH-E)
or the Cigarette plug DC power supply for the Dell Latitude E-Series (FM-PWR-DLC-E).
www.firstmobiletechnologies.com œ 1.800.330.5399 9
Docks and Cradles [for Dell™]
E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstCradlePlus ™
Part # FM-CP-ATG-E
a [scratch resistant clamps]
[non-glare surface finish]........+sseceeses . i cae HEE re he
for maximum in-vehicle å nf p diff p d
usability in four di erent sizes (an
° : colors) to fit the E6400 or
[made with heavy-gauge metal] ---+++++- : E6400ATG, either with or
for vibration resistance and : : without a port replicator.
safety.
s}uə}U09 JO ƏlqeL 0} ANAF
=
p
plus
pest rae? n
ra Mooie T „ae aralan
Find cdbscesbeesiGeweswenisosecudenesseceu’ [key lock system]
Engages and secures
the Dell Notebook to the
FirstCradlePlus for increased
safety and security.
re
Expandable to suit your needs
The new FirstCradlePlus for the Dell E6400, E6410, E6400ATG, and E6410ATG can function alone as a
cradle, and by adding the Dell E-Series Standard (or Advanced) Port Replicator, you gain the features of a
full vehicle docking station.
Durable Design: Tested to military standard (MIL-STD 810F) and Standard of Automotive Engineers (SAE
J1455) — the ultimate benchmark for vibration and crash resistance certification.
Optional Screen Holder available for added safety and stability
Key lock for increased security
Powder-coated finish protects from sun glare, smudges and scratches
Optimal footprint provides maximum user space
Computer closes completely in locked position
Quality construction: made of heavy-gauge metal to withstand the toughest environments
Warranty: Full 3-Year Warranty on all metal products.
www.firstmobiletechnologies.com œ 1.800.330.5399 10
Docks and Cradles [for Dell™]
FirstCradlePlus to add the
connectivity and features of
a full vehicle docking station
(sold separately by Dell).
E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstCradlePlus”Y <
(Pictured below with the Dell Advanced Port C
Replicator, sold separately by Dell. <
The FirstCradlePlus is also compatible with the Dell U
Standard Port Replicator, also sold separately by Dell.) =
Q)
eoeeeeeecccccccoe [Optional Dell Advanced Så
: Port Replicator] z
Attaches to the Ei
O
fe)
=
D
=
(79,
[optional accessories]
Hardwired DC Power Supply Cigarette Plug DC Power Brackets for Dell E-Series
for Dell Latitude E-Series Supply for Dell Latitude Advanced Port Replicator ....:
Part # FM-PWR-DLH-E E-Series Part # FM-CP-EXT-TABS
First Mobile Technologies doesn't A EE RE ae While the Dell Standard Port
“tap-in” to existing power sources This optional accessory allows the Replicator needs no additional
that are used to power your critical user to utilize the vehicle’s power hardware, First Mobile Technologies
systems. We use separate and supply to run the laptop without the can provide the additional
distinct wiring to power your mobile need for hardwiring. brackets necessary to utilize Dell's
solution. It's safer for the operation Advanced Port Replicator with the
of your equipment and safer for you. FirstCradlePlus.
www.firstmobiletechnologies.com œ 1.800.330.5399 11
Docks and Cradles [for Dell™]
FirstDock™ for the Latitude™ XT2 XFR Tablet
Part #’s: FM-D-XFR-XT2
FM-D-XFR-XT2-RF
Built-in 8x DVD+RW Drive that reads and writes to CDs and DVDs
Option to add 3 RF (antenna) Pass Thru’s for the functionality you require (Part # FM-D-XT2-XFR-RF)
Available ports include a serial connector, audio connector, 4 USB 2.0 (2 rear, 1 side, and 1 front)
connectors, an AC adapter, VGA connector, DVI connector, eSATA connector, RJ-45 network connector,
and a 1394 (firewire) connector
Durable design tested to military standard (MIL-STD 810F) and Standard of Automotive Engineers
(SAE J1455) — the ultimate benchmark for vibration and crash resistance certification.
=
=
U
=e
O
D!
co
D
O
=A
Q
O
=)
=
D
=)
mr
0)
Key lock for increased security
Aesthetic powder-coated finish protects from smudges and scratches
Optimal footprint provides maximum user space
" [Triple RF Pass-Thru Option]
Connects Wireless WAN, GPS,
… fin-dock DVD+RW drive] : and Wireless LAN antennas
reads and writes to CDs and °
DVDs
zi
3
Mobile Techno | i
k se
First
7
eee @eeceeoeeeeneeeee
í
[conveniently placed USB
OFTS| -cccccccccccccccccccccccccccccccces i :
poris [key lock system] +++ '
One front, one side, and
e front, one side, a Deters theft by securing
two rear USB connectors the XT2 XFR Tablet to the
allow easy access when FirstDock
connecting perepherials to
your FirstDock XT2 XFR
www.firstmobiletechnologies.com œ 1.800.330.5399 12
Docks and Cradles [for Dell™]
E6400XFR Notebook FirstCradle™
Part # FM-C-XFR-E
seeeeeo [optimal footprint]
Custom designed for
the Dell Latitude E6400
XFR Notebook to provide
maximum in-vehicle user
space
=
=
U
=e
O
D!
co
D
O
=A
Q
O
=)
=
D
=)
mr
0)
mm 199 isis >
[scratch resistant clamps] °
° to protect and secure the
[key lock system] computer while driving.
Deters theft by securing
the XFR Notebook to the
FirstCradle, and allows for
easy placement and removal
of computer
Rugged Design for a Ruggedized Computer: Tested to military standard (MIL-STD 810F) and Standard
of Automotive Engineers (SAE J1455) — the ultimate benchmark for vibration and crash resistance
certification.
Equipped with screen holder for added stability (included free with all Dell E-Series FirstDock and
FirstCradle XFR models)
Key lock for increased security
Powder-coated finish protects from sun glare, smudges and scratches
Computer closes completely in locked position
Quality construction: made of heavy-gauge metal to withstand the toughest environments
Warranty: Full 3-Year Warranty on all metal products
www.firstmobiletechnologies.com œ 1.800.330.5399 13
Docks and Cradles [for Dell™]
D630 XFR™ Notebook FirstDock™ D620 | D630 | ATG Notebook FirstDock™
Part # FM-D-XFR Part # FM-D-D620
Cc
=
U
r
(@)
D
e
D
(@)
=A
Q
O
3
re
CD
5
=F
T
Features RF Pass-Thru (FM-D-XFR-RF Dock Only)
Provides external (vehicle mounted) antenna connection
capabilities (TNC) for XFR notebooks with integrated WiFi
(802.11) and/or Broadband radios (Only available for the
Latitude XFR D630)
Rugged Design
Engineered and tested to a military standard
(MIL-STD-810F), the benchmark for vibration and crash
resistance certification
“Undock and Go” ™ Feature
For easy transition from dock/undock status — Notebook
remains on and active
Key Lock System [Dell™ D/Port Station Functionality] |
Engages and secures the Dell notebook to the First Mobile One simple connection provides access |
Technologies docking station. Dedicated undock button and to 13 expansion ports including: |
indicator provides quick, safe undocking
VGA, DVI, S-Video
Closes Completely Parallel, Serial
Laptop LCD closes completely while docked PS/2 (Mouse and Keyboard)
S/PDIF
Tilt-Swivel device USB 2.0 (x3)
RJ-11, and RJ-45
Vertically and horizontally rotates computer for optimal
positioning
Non-glare surface finish for maximum in-vehicle usability
Scratch resistant clamps for touch points with computer
Made with 16-gauge steel for vibration resistance and
safety
Warranty
1-Year Standard Warranty on FMT In-Vehicle Docks.
Optional 2- to 3-Year Warranty available.
Accessories
FMT offers a wide range of docking accessories to
complete your solution, including a variety of in-vehicle
docking elements (power/charge options, consoles,
mounting hardware and other support elements)
www.firstmobiletechnologies.com œ 1.800.330.5399 14
Docks and Cradles [for Dell™]
D620 | D630 | ATG Notebook FirstCradle™
Part # FM-C-D620
[scratch resistant clamps]-------- .
for touch points with computer
ner
CE
C
U
m
O
D
O
D
O
=A
O
(@)
=]
=
D
=]
=
U)
[non-glare surface finish] -----
for maximum in-vehicle
usability
[made with 16-gauge steel]--- t
for vibration resistance and
safety.
Closes Completely Laptop lid closes completely while docked.
[key lock system] °
Engages and secures the Dell
Notebook to the First Mobile
Technologies docking station.
Dedicated undock button and
indicator provides quick, safe
undocking
[screen holder] E ees eeeens eaeeeve
Part # FM-SC
ensures computer screen
remains in a fixed position
- [allows full access to all existing computer ports]
www.firstmobiletechnologies.com œ 1.800.330.5399 15
Docks and Cradles [for Universal use]
New FirstCrad/e™ Universal
Part # FM-C-UNIV2
=
=
U
=e
O
>
co
D
O
=A
Q
O
=)
=
D
=)
rr
U)
One Size Fits All
Small enough to fit a 9.25” Netbook, for secure and affordable
in-vehicle computing. Expands to over 15.5” to securely hold almost
any size notebook computer on the market
[back view]
Steel Housing, 0.078-inch thick, to
withstand the toughest environment.
Innovative locking mechanism
(patent pending) that locks the sliding
tray in any position to securely hold
computers of varying widths.
Six Adjustable Touch-Points allow
variable bracket height and position to secure your computer in the safest possible position
Provides full access to computer functionality such as ports, card slots, and drive bays on most computers
Warranty
Full 3-year warranty on all metal components
[optional accessories]
Screenholder Mini Brackets
Part # FM-SC-UNIV2 Part # FM-BKT-UNIV2
Designed for
use with smaller
notebook or netbook
computers, these
rear mini brackets
replace the standard,
full-sized brackets
in the rear of the
FirstCradle Universal
for a safer, more
secure fit.
Attaches to the side
of the FirstCradle
Universal to
securely hold the
laptop screen in
virtually any open
position.
www.firstmobiletechnologies.com œ 1.800.330.5399 16
Tilt/ Swivel
Attaches to the end of the top plate, allowing the "i
computer and dock to pivot and tilt for optimal G
positioning and user comfort with positive lock =
feature and 0-80° of tilt and 360° of swivel. Extra me
; i (@)
long handle for ease of use available in the =
FM-TS-L. z
D
(@)
Part # Length O
FM-TS-S 9.5” z
FM-TS-L 1057 D
=)
a
[tilt/swivel accessories]
Base Plate Base plate mounts onto a vertical surface or
console box. Made of 11-gauge powder-coated
steel, the base plate supports the tilt/swivel and
docking station instead of a standard vehicle base
mount
Part #
FM-TSB
Bracket Bracket allows for rotation and extension of
docking station when the base plate is used
instead of a standard vehicle base mount.
Part # Length
FM-BKT-X 7-3/4”
FM-BKT-X15 9”
FM-BKT-X40 12”
www.firstmobiletechnologies.com œ 1.800.330.5399 17
Tilt/ Swivel
[tilt/swivel accessories - continued]
C=
C
Spacer Block =
å Spacer Block is designed to be used between is
existing mounting equipment and tilt swivel to add a
1.5” of additional height 2
D
Q,
Part # ©
FM-SPBLK =
=
a
Universal Mounting Plate Adapter
3 j The Universal Mounting Plate Adapter is
designed to attach any FirstDock or FirstCradle to
a competitor's mounting equipment. Comes with
instructions and examples of various competitors’
mounting patterns for easy installation.
Part #
FM-UNIV-ADPT
Isolator Plat
E a The Isolator Plate is used between the universal
docking tray and a tilt-swivel device to isolate shock
and vibration. This unit is designed to be used with
all Dell E-Series FirstDocks and FirstCradles, and
is also compatible with most other FMT docking
solutions.
Part #
FM-ISO-E-DOCK
www.firstmobiletechnologies.com œ 1.800.330.5399 18
Top Plates
Top plates provide vertical and horizontal movement to allow the user to
move the laptop between the driver and passenger.
6” Top Plate
9” Top Plate
12” Top Plate
12” Articulating Arm Top Plate
CE
C
<
Six-inch Top Plate is designed for insertion into U
pole assembly =
+
ad)
eJ
D
Part # l
FM-TOP-06 ©
(@)
=
CD
=
a
Nine-inch Top Plate features a swing arm. Set
collar keeps the tube adjusted to the correct height
while rotational adjustments are made
Part #
FM-TOP-09
Twelve-inch Top Plate features a swing arm. Set
collar keeps the tube adjusted to the correct height
while rotational adjustments are made. A Twelve-
inch Top Plate Slide is also available, which slides
open to extend the Top Plate to a full 16”.
Part f's
Standard: FM-TOP-12M (pictured at right)
Slide: FM-TOP-12S (not pictured)
Articulating Arm Top Plates feature a two
piece design that allows for greater flexibility in
positioning. In addition to the 12-inch version
pictured at right, a 16-inch Articulating Arm Top
Plate is also available.
Part f's
12-inch: FM-TOP-AARM (pictured at right)
16-inch: FM-TOP-AARM-16 (not pictured)
www.firstmobiletechnologies.com œ 1.800.330.5399 19
Poles [for Universal use]
CE
Poles attach to the various base mounts and set the height of the overall mount configuration. =
Poles are made with sturdy 12-gauge poles and /-gauge steel plates for bolting to the base. v
Oo
D
SF
D
el
Pole Bottom O
Part # Length =
FM-P-05 5” >
(0p)
FM-P-09 9”
FM-P-14 14”
Pole bottom attaches to vehicle base mount
Rack-to-Post Mount
Part #
FM-RP
Rack-to-Post Mount attaches modems or other
equipment to the base of any pole
[poles come in 5”, 9” and 14” lengths
and can be cut down to size]
www.firstmobiletechnologies.com œ 1.800.330.5399 20
[our quality story]
First Mobile Technologies is a quality company that services
its customer in a timely manner.
They gO Out of their Way to meet customer needs
and provide a high quality product.
Cc
C
U
r
(@)
D
e
D
(@)
=A
Q
O
3
re
CD
=
=F
T
Mel Bauernfeind
Baltimore County Electric Services
The quality of First Mobile hardware
and experience
and Skill of their professional installers is an integral
part of the solutions we offer to the emergency responder
marketplace.
John Fix, President
Iron Compass Map Company
www.firstmobiletechnologies.com œ 1.800.330.5399 21
Base Mounts
www.firstmobiletechnologies.com
+
1.800.330.5399
=
C
<
=
To identify the base mount that works best with your vehicle, locate the make | model | year of your =
vehicle and read across to the corresponding part number. If your vehicle is not listed, or you need 2
to mount to a boat, forklift, or other vehicle application, call your First Mobile Technologies sales z
representative to help you find a mobile solution that best fits your needs. 5
O
=
Make Model Year Bucket or Bench | Drill Passenger | Part Number D
seating Required | Seat Mount =
Chevrolet/ GMC
Blazer S-10 Series 1994-2002 Bucket FM-B-BLZ
1994-2002 Bucket X FM-BP-BLZ
CK-1500-CK3500 2000-2007 Both YES FM-B-CK2
Silverado/Sierra 2007-newer Both FM-B-CK3
[new body style]
Bucket X FM-BP-10
Colorado/Canyon All model years Both FM-COL-H
All model years Both X FM-COL-S
Envoy/Trailblazer 2001-newer Both X FM-B-ENV
Impala 2000-2005 Bucket YES X FM-BP-IMP
2006-newer Both YES X FM-B-IMP2
Suburban/Tahoe/ 2001-2006 Both FM-B-CK2
mon 2001-newer Bucket x FM-BP-TAH
Topkick 2003-newer Both YES FM-B-52
Vans-Astro 1998-newer Bucket YES FM-B-52
Vans-Fullsize 1998-newer Bucket YES FM-B-52
2004-newer Bucket xX FM-B-58
Dodge/ Chrysler
Avenger 2008-newer Bucket X FM-B-
AVENGER
Caravan 2008-newer Bucket X FM-B-
CARAVAN
Charger/ Magnum/ 2005-newer Bucket FM-B-CHGR
300
Dakota 2000-newer Bucket FM-B-DUR
Durango 2000-2003 Bucket FM-B-DUR
2004-newer Bucket FM-B-DUR2
22
Base Mounts
Make Model Year Bucket or Bench | Drill Passenger | Part Number
seating Required | Seat Mount
Dodge/ Chrysler (continued) =
Ram 2003-newer Both FM-B-RM3 =
2003-2004 Bucket YES FM-B-RM4W O
2005-newer Bucket FM-B-RM4W2 D!
Sprinter Bucket FM-B-Sprinter is
2
Ford 3
Crown Victoria All model years Both FM-B-CV ©
All model years Bucket x FM-BP-12 7
Escape 2005-newer Bucket FM-B-ESC
Excursion 2000-newer Bucket FM-B-EXC
Expedition 2000-2002 Both FM-B-EXPD2
2003-newer Bucket FM-B-EXPD3
Explorer 1999-newer Both FM-B-RAN2
2001-older Both X FM-B-EXPLS
2002-newer Both FM-B-EXPL2
F-Series F150 2001-2003 Both FM-B-FS2
2004-newer Both X FM-B-FS-S
2004-newer Both FM-B-FS-H
F Series (SD) 2000-newer Both FM-B-FSD-H
2000-newer Bucket xX FM-B-EXC
Ranger 1999-newer Both FM-B-RAN2
All years Bucket X FM-B-EXPLS
Vans: Aerostar 1998-newer Bucket YES FM-B-52
Freestar
Vans: Econoline Series | 2002-newer Bucket X FM-B-54
Vans: Transit Connect 2010-newer Bucket X FM-BP-TRA NSIT
Freightliner
| Freightliner 2009-newer Not Applicable YES FM-B-FR8-M2
Jeep
Cherokee 1997-newer Bucket X FM-B-JEEP
Grand Cherokee 1998-2005 Bucket X FM-B-CHER
2006-newer Bucket X FM-B-CHER2
Liberty All model years Bucket X FM-BP-12
Toyota
Highlander 2007-newer Bucket X FM-B-
HIGHLANDER
www.firstmobiletechnologies.com œ 1.800.330.5399 23
Dedicated Base Mounts [for Chevrolet/GMC]
Blazer S-10 Series
Hump Mount
Part #
FM-B-BLZ
Passenger Side Base and Pole Mount
Part #
FM-BP-BLZ
Canyon/Colorado
Hump Mount
Part #
FM-COL-H
Side Base Mount
Part #
FM-COL-S
Bucket/
Bench
Bucket
Bucket/ Bench
Bucket
Bucket/ Bench
Both
Bucket/ Bench
Both
www.firstmobiletechnologies.com œ
=
C
=
U
O
3
Drilling Pole Top Plate D
Required | Required | Required (ej
No 5” or9” | 67,9” or 12” O
=!
D
=]
(79)
Drilling Pole Top Plate
Required | Required | Required
No included | 67,9” or 12”
Drilling Pole Top Plate
Required | Required Required
No 5”,9” or 14” | 6”, 9” or 12”
Drilling Pole Top Plate
Required | Required Required
No 5”,9” or 14” | 6”, 9” or 12”
1.800.330.5399 24
Dedicated Base Mounts [for Chevrolet/GMC]
CK1500-CK3500
Hump Mount
Part #
FM-B-CK2
Silverado/Sierra
Hump Mount
Part #
FM-B-CK3
Passenger Seat Mount
Part #
FM-BP-10
Envoy/ Trailblazer
Base Mount
Part #
FM-B-ENV
www.firstmobiletechnologies.com +
=
=
=
U
a]
z
Bucket/ Bench | Drilling Pole Top Plate D
Required | Required | Required 2]
Both Yes 57,9” or 14” | 6”, 9” or 12” O
3
D
=
O)
Bucket/ Bench Drilling Pole Top Plate
Required | Required | Required
Both No 5” or9” | 6”, 9” or 12”
Bucket/ Bench Drilling Pole Top Plate
Required | Required | Required
Bucket No 9” or 14” | 6”, 9” or 12”
Bucket/ Bench Drilling Pole Top Plate
Required | Required | Required
Both No 57,97 or 14” | 6”, 9” or 12”
1.800.330.5399 25
Dedicated Base Mounts [for Chevrolet/GMC]
Impala
=
=
<
Passenger Side Base and Pole Mount U
O
3
Part # Bucket/ Bench | Drilling Pole Top Plate D
Required Required Required 2]
FM-B-IMP Both No 5”, 9” or 14” | 6”, 9” or 12” O
=
D
=
T
Passenger Side Base and Pole Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required Required Required
FM-B-IMP2 Both Yes 5”, 9” or 14” | 6”, 9” or 12”
Suburban/ Tahoe
Hump Mount
Part # Bucket/ Bench | Drilling Pole Top Plate
Required | Required Required
FM-B-CK2 Both Yes 5”, 9” or 14” | 6”, 9” or 12”
Hump Mount
Part # Bucket/ Bench | Drilling Pole Top Plate
Required | Required Required
FM-B-CK3 Both Yes 5”, 9” or 14” | 6”, 9” or 12”
www.firstmobiletechnologies.com œ 1.800.330.5399 26
Dedicated Base Mounts [for Chevrolet/GMC]
Suburban/Tahoe a
=
<
Passenger Side Base and Pole Mount U
O
3
Part # Bucket/ Bench | Drilling Pole Top Plate D
Required | Required | Required (ej
FM-BP-TAH Bucket No included | 6”, 9” or 12” O
3
D
=
T
Topkick/ Vans: Astro and Fullsize
Flat floor Base and Pole Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required | Required | Required
FM-B-52 Both Yes included | ©”, 9” or 12”
Passenger Seat Base Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required | Required | Required
FM-B-58 Bucket No included | 6”, 9” or 12”
[for Dodge]
Avenger
Passenger Side Base Mount
Part # Bucket/ Drilling Pole Top Plate
Bench Required | Required | Required
FM-B-AVENGER Bucket No 5” or 9” | 6”, 9” or 12”
www.firstmobiletechnologies.com œ 1.800.330.5399 27
Dedicated Base Mounts
Caravan
Side Base Mount
Charger/Magnum/300
Side Base Mount
Dakota/Durango
Side Base Mount
Durango
Side Base Mount
aah,
Part # Bucket/
Bench
FM-B-CARAVAN Bucket
Part # Bucket/
Bench
FM-B-CHGR Bucket
Part # Bucket/
Bench
FM-B-DUR Bucket
Part # Bucket/ Bench
FM-B-DUR2 Bucket
www.firstmobiletechnologies.com œ
[for Dodge]
Drilling Pole
Required | Required
No 5”, 9” or 14”
Drilling Pole
Required Required
No 5”, 9” or 14”
Drilling Pole
Required Required
No 5”, 9” or 14”
Drilling Pole
Required Required
No 5”, 9” or 14”
1.800.330.5399
Top Plate
Required
6”, 9” or 12”
Top Plate
Required
6”, 9” or 12”
Top Plate
Required
6”, 9” or 12”
Top Plate
Required
6”, 9” or 12”
E
=
U
+
O
D!
ez
D
O
=A
Q
O
=)
=
D
=)
+
U)
Dedicated Base Mounts
Ram
Base Mount
Part #
FM-B-RM3
Base Mount
Part #
FM-B-RM4W
Base Mount
Part #
FM-BP-RM4W2
Sprinter
Passenger Seat Mount
Part #
wut
[for Ford]
Crown Victoria
Hump Mount
Part #
FM-B-CV
FM-B-SPRINTER
Bucket/ Bench
Both
Bucket/ Bench
Bench
Bucket/ Bench
Bucket
Bucket/ Bench
Bucket
Bucket/ Bench
Both
www.firstmobiletechnologies.com œ
[for Dodge]
Drilling Pole Top Plate
Required Required Required
No 5”, 9” or 14” | 6”, 9” or 12”
Drilling Pole Top Plate
Required Required Required
Yes 5”, 9” or 14” | 6”, 9” or 12”
Drilling Pole Top Plate
Required Required Required
No 5”,9” or 14” | 67,9” or
12”
Drilling Pole Top Plate
Required | Required | Required
No 5” or 9” | 6”, 9” or 12”
Drilling Pole Top Plate
Required Required Required
No 5”, 9” or 14” | 6”, 9” or 12”
1.800.330.5399
CC
=
U
+
O
D!
ez
D
O
=A
Q
O
=)
=
D
=)
+
U)
Dedicated Base Mounts
Crown Victoria
Base and Pole Passenger Side Mount
Part #
FM-BP-12
Escape
Passenger Side Seat Mount
Part #
FM-B-ESC
Excursion
Passenger Side Base Mount
Part #
FM-B-EXC
Expedition
Side Mount
Part #
FM-B-EXPD2
www.firstmobiletechnologies.com œ
[for Ford]
CC
=
<
U
a
ap an!
Bucket/ Bench Drilling Pole Top Plate =!
Required | Required | Required D
Bucket No included | 6”, 9” or 12” =
O
@)
=
D
=
T
Bucket/ Bench Drilling Pole Top Plate
Required | Required Required
Bucket No 5” or 9” 6” or 9”
Bucket/ Bench Drilling Pole Top Plate
Required Required Required
Bucket No 5”, 9” or 14” | 6”, 9” or 12”
Bucket/ Bench Drilling Pole Top Plate
Required Required Required
Both No 5”, 9” or 14” | 6”, 9” or 12”
1.800.330.5399 30
Dedicated Base Mounts [for Ford]
Expedition
=
=
Side Mount a
Oo
Part # Bucket/ Bench Drilling Pole Top Plate T!
Required | Required Required =
FM-B-EXPD3 Bucket No 5”, 9” or 14” | 6”, 9” or 12” Oo
O
O
=
D
=
T)
Explorer/ Ranger
Hump Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required Required Required
FM-BP-RAN2 Both No 5”, 9” or 14” | 6”, 9” or 12”
Side Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required | Required Required
FM-B-EXPLS Bucket No 5”, 9” or 14” | 6”, 9” or 12”
Side Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required Required Required
FM-B-EXPL2 Bucket No 5”,9” or 14” | 6”, 9” or 12”
www.firstmobiletechnologies.com œ 1.800.330.5399 31
Dedicated Base Mounts [for Ford]
F-Series F150
=
=
<
Side Base Mount U
O
D.
Part # Bucket/ Bench Drilling Pole Top Plate =
Required Required Required O
=
FM-B-FS2 Both No 5”, 9” or 14” | 6”, 9” or 12” O
=!
D
=
T)
Side Base Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required Required Required
FM-B-FS-S Bucket No 5”, 9” or 14” | 6”, 9” or 12”
Hump Mount
= Part # Bucket/ Bench Drilling Pole Top Plate
/ \ Required Required Required
| E FM-B-FS-H Both No 57,9” or 14” | 67,9” or 12”
F-Series F250/ 350/ 450
Hump Mount
Part # Bucket/ Bench Drilling Pole Top Plate
Required Required Required
FM-B-FSD-H Both No 5”, 9” or 14” | 6”, 9” or 12”
www.firstmobiletechnologies.com œ 1.800.330.5399 32
Dedicated Base Mounts
F-Series F250/ 350/ 450
Side Mount
Part # Bucket/ Bench
| FM-B-EXC Bucket
Ranger
Hump Mount
Part # Bucket/ Bench
FM-BP-RAN2 Both
Side Mount
Part # Bucket/
Bench
FM-B-EXPLS Bucket
Vans: Aerostar, Freestar
Flat Floor Base and Pole Mount
Part # Bucket/
Bench
FM-B-52 Both*
www.firstmobiletechnologies.com +
[for Ford]
C
=
U
O
D.
eJ
' D
Drilling Pole Top Plate O
Required | Required | Required O
No 5”, 9” or 14” | 6”, 9” or 12” 2
D
=
(79)
Drilling Pole Top Plate
Required Required Required
No 5”, 9” or 14” | 6”, 9” or 12”
Drilling Pole Top Plate
Required Required Required
No 5”, 9” or 14” | 6”, 9” or 12”
Drilling Pole Top Plate
Required Required | Required
Yes included | 6”, 9” or 12”
1.800.330.5399 33
Dedicated Base Mounts [for Ford]
Vans: Econoline Series
c
Flat Floor Base and Pole Mount C
<
U
of
Part # Bucket/ Drilling Pole Top Plate T!
Bench Required | Required Required oJ
D
FM-B-54 Both Yes included | 6”, 9” or 12” O
Så
O
(e)
=
D
=l
T
Vans: Transit Connect
Base and Pole Passenger Side Mount
Part # Bucket/ Drilling Pole Top Plate
Bench Required | Required Required
FM-BP-TRANSIT Bucket No included | 6”, 9” or 12”
[for Freightliner]
Freightliner
Side Base Mount
Part # Bucket/ Drilling Pole Top Plate
Bench Required Required Required
FM-B-FR8-M2 N/A Yes 9”, 12” or 14” | 6”, 9” or 12”
[for Jeep]
Cherokee
Side Base Mount
Part # Bucket/ Drilling Pole Top Plate
Bench Required Required Required
FM-B-JEEP Bucket No 5”, 9” or 14” | 6”, 9” or 12”
www.firstmobiletechnologies.com œ 1.800.330.5399 34
Dedicated Base Mounts
Grand Cherokee
Side Base Mount
Part # Bucket/ Bench | Drilling
Required
FM-B-CHER Both No
Side Base Mount
Part # Bucket/ Bench | Drilling
Required
FM-B-CHER2 Bucket No
Liberty
Base and Pole Side Mount
Part # Bucket/ Bench Drilling
Required
FM-BP-12 Bucket No
[for Toyota]
Highlander
Side Base Mount
Part # Bucket/ Drilling
FM-B-HIGHLANDER Bucket No
www.firstmobiletechnologies.com œ
Bench Required
[for Jeep]
Pole Top Plate
Required Required
5”, 9” or 14” | 6”, 9” or 12”
Pole Top Plate
Required Required
5”, 9” or 14” | 6”, 9” or 12”
Pole Top Plate
Required Required
12” included | 6”, 9” or 12”
Pole Top Plate
Required Required
5”, 9” or 14” | 6”, 9” or 12”
1.800.330.5399
ce
=
U
+
O
D!
ez
D
O
=A
Q
O
=)
=
D
=)
mr
0)
Universal Base Mounts
Flat Floor Base and Pole Mount
a
Flat Floor Base and Pole Mount is designed for vehicles with =
high seats, such as vans, trucks and fire engines. Also available ==
with a 36” post. =
—
Part # Bucket/ Drilling Pole Top Plate =!
Bench Required Required | Required D
FM-B-52 Both” Yes included | 6”, 9” or 12” 2
9
=
CD
=
0)
[Support Accessories for Universal Base Mounts]
Quick Removal Mounting Base
The Quick Removal Mounting Base for the
FM-B-52 allows for quick removal of equipment.
Can be used as base of any pole, but specifically
designed for the FM-B-52.
Part #
FM-BQ-52
Floor Support Bracket
Floor Support Bracket for the FM-B-52 adds
structural support when mounting equipment in
larger vehicles.
oe 2
FM-BKT-52
Support Tube
Support Tube stabilizes the mount in high vibration
yf areas. For use with any pole mount.
Part #
FM-SUPRT-52
Voltage Protection Unit Steel Cover
Voltage Protection Unit Steel Cover protects the
power supply that feeds into the docking system.
Part #
FM-P-COV
www.firstmobiletechnologies.com œ 1.800.330.5399 36
Universal Base Mounts
Passenger Base Mount
Passenger Base Mount allows equipment to be
mounted close to the vehicle hump.
Part # Bucket/ Bench | Drilling Pole Top Plate
Required | Required Required
FM-B-69 Both Yes 5”, 9” or 14” | 6”, 9” or 12”
=
=
U
+
O
>
co
D
O
=A
Q
O
=)
=
D
=)
mre
0)
Wall Base Mount
Wall Base Mount allows equipment to be mounted to vertical
surfaces or the sides of large vehicles such as trucks or vans,
while providing added support.
Part # Bucket/ Bench Drilling Pole Top Plate
Required | Required Required
FM-PW-13 Both Yes included | 67,9” or 12”
Adjustable Seat Mount
Adjustable Seat Mount fastens into the passenger seat using
safety seat belt for security. It provides a platform for the tilt/
swivel. Portable and lightweight, it can be easily installed and
removed.
Part # Bucket/ Bench Drilling Pole Top Plate
Required Required Required
FM-SEATADJ Both No 5”, 9” or 14” | 6”, 9” or 12”
Quick Removal Base Mount
Quick Removal Base Mount allows for quick removal of
equipment and can be used as the base of any pole.
Part # Bucket/ Bench Drilling Pole Top Plate
Required | Required | Required
FM-BQ-P Both Yes Any NA
www.firstmobiletechnologies.com œ 1.800.330.5399 37
Universal Base Mounts
Vertical Surface Base Mount
(dl
C
Vertical Surface Base Mount is designed for the sides and =
vertical surfaces where space is limited, or to existing console =
areas. =
Sø
Part # Bucket/ Bench | Drilling Pole Top Plate 2
O
Required | Required | Required 5
FM-B-08 NA Yes Included | 6”, 9” or 12” O
D
=
N)
Horizontal Surface Base Mount
Horizontal Surface Base Mount is designed to be mounted
where space is limited, such as desktops, buses and fire engines.
Part # Bucket/ Bench | Drilling Pole Top Plate
Required | Required | Required
FM-B-56 NA Yes No No
Floor Support Bracket
Floor Support Bracket for the FM-B-56 and the
FM-B-08 adds structural support when mounting
equipment to larger vehicles.
” UNN Part #
FM-BKT-56
www.firstmobiletechnologies.com œ 1.800.330.5399 38
Accessories % [screen holders]
s}uə}U09 JO ojqel O} JINN
screen holders add ease to your mobile computing
by securing your screen in place.
Available for the following computers:
Panasonic CF-29, CF-30, & CF-52
Dell 620/ 630/ ATG
Dell D-XFR
Dell E6400 Series
Dell Latitude XT2 XFR
An adjustable screen holder is available for all other computer models.
www.firstmobiletechnologies.com œ 1.800.330.5399
Accessories
Console Box Universal Base Plate
Part #
FM-B-PLATE
Leg Kits
Console Box Universal Base Plate provides a platform for
mounting brackets, poles and console boxes. It is designed so
wiring can be fed from underneath for convenience. It is also
threaded for easy pole assembly.
[console units]
=
=
U
+
O
D!
ez
D
O
=A
Q
O
=)
=
D
=)
+
U)
Leg kits are for use with the Console Box Universal Base Plate
most vehicle models.
Vehicle models
Suburban | Tahoe
Silverado | Sierra
Crown Victoria
Durango ['00-'03]
Durango [‘04-newer]
Expedition | F-Series [‘00-°02]
Expedition | F Series [‘03-newer]
Impala [‘00-°05]
Impala [06-newer]
Adjustable Cup Holder
base mounts.
Part #
FM-CUP2
www.firstmobiletechnologies.com œ
[FM-B-Plate]. and attach to seat bolts. No drilling is required for
Part #
FM-L-CK2
FM-L-CK3
FM-L-CV
FM-L-DUR
FM-L-DUR2
FM--EXPD2
FM-L-EXPD3
FM-L-IMP
FM-L-IMP2
Adjustable Cup Holders can be mounted to the console box or
1.800.330.5399 40
Accessories [console units]
Console Box DE
=
Console Box is 14’ of inside box space for communications =
equipment. Made of 14-gauge powder-coated steel. =
Complete with faceplates and filler panels. a!
>
Part # s
FM-MC-14 ee
=)
D
=l
: TerTrrrri rT ts Console Box Accessories Fee Feer EST TT p a
Filler Panel : Snapfit™:Faceplates
Filler Panels fill spaces between Snapfit™ Faceplates are used with the
radio and switch units while providing console box. These panels cover the
a finished appearance. Available in spaces on the sides of the radio unit when
several sizes from 1/2 “ to 4’. stored in the console box, providing a
finished look. Available in several lengths.
Part #
FM-F-1.50 Part #
FM-FP-1.50
PANIC SIS AONNE AEO EEE A AA E E E
The Adjustable Armrest mounts directly to the console
box and comes in 2” wide and 4” wide
Part #
FM-ARMEXT
The Armrest mounts directly to the console box.
Part #
FM-ARM-C
www.firstmobiletechnologies.com œ 1.800.330.5399 41
Accessories [Pentax printer mounting hardware]
CE
Pentax Printer Mount =
=>
(@)
Pentax Printer Mount is designed for use with any D
Pentax Pocket Jet series mobile printer. Fast-release =
design for fast printer docking and undocking to allow el
for use either in or out of vehicle. Use with roll paper. ©
Optional Pentax Roll Holder (FM-PTX-ROL) available. =
7]
Part #
FM--PTX-CMB
Pentax Armrest Mount
Pentax Armrest Mount attaches to the pole and
houses both the Pentax printer and a roll of paper. The
padded arm rest lid opens to provide access to printer
and paper. Entire unit flips up and back 90 degrees,
similar to vehicle factory armrests. Includes a pole for
mounting to the floor or base plate.
Part # Pole length
FM--PTX-ARM 9”
FM-PTX-SH 5”
Steel Dash Mount
| … Steel Dash Mount is designed for use with any
p Pentax Pocket Jet series mobile printer. Dash mount
h for the Crown Victoria only.
Part #
FM--PTX-DSH
www.firstmobiletechnologies.com œ 1.800.330.5399 42
Accessories [power supplies]
Direct to Battery Wiring Kit
Direct to Battery Wiring Kit comes in a neat,
professional package that is designed to ease
connectivity and cut the installation time. Complete with
15 feet of vinyl-covered 12-gauge wire, the kit features
a locking disconnection plug and a waterproof ATC 25-
amp fuse holder. A heavy-duty 50-amp version is also
available (FM-WIRPK5O).
Cc
C
<
U
aj
D.
e
D
ej
Part #: FM-WIRPK Q
=
CD
=
0)
Power Supply Bracket
The Power Supply Bracket is designed to
secure both hardwire and cigarette power
supplies for both Dell and Panasonic computers
(see below) to the vehicle's interior. The open
design allows airflow while securely holding the |
power supply in place. Part #: FM-BKT-PWR
Cigarette Lighter Power —
[for Dell]
D-Series Part # FM-PWR-DLC Part # FM-PWR-PAC
E-Series Part # FM-PWR-DLC-E
XT2 XFR Tablet: Part # FM-PWR-XT2
Hardwire Connection Power Supply
D-Series Part # FM-PWR-DLH Part # FM-PWR-PAH
E-Series Part # FM-PWR-DLH-E
XT2 XFR Tablet: Part # FM-PWR-XT2-HW
www.firstmobiletechnologies.com œ 1.800.330.5399 43
POLICIES
Partnership Services
As the leading provider of integrated turn-key hardware
solutions, First Mobile Technologies maintains strategic
partnerships and alliances with many Fortune 500
companies to offer the highest quality equipment at
the lowest prices. Additional offerings include antennas,
modems, wireless components, computers, racks, lights,
sirens, and more. Please contact your sales representative
or contact us at 1.800.330.5399 for a complete listing.
Together, we move you seamlessly through all phases of
wireless integration and provide you with a total solution.
Terms of Sale
First Mobile Technologies will provide
consideration for an open account to all customers
with approved credit. Standard credit terms are net
30. Credit will remain solely at the discretion of First
Mobile Technologies. To request a credit application,
please contact 1.800.330.5399 or fax a request to
1.610.828.1195.
adequate
Product may additionally be purchased with Visa,
MasterCard, America Express, cash-in-advance, or
C.O.D.
Pricing
Prices, specifications, and products are subject to change
without notice. Possession of a price list does not guarantee
pricing or product availability. First Mobile Technologies
reserves the right to discontinue or modify products at
anytime.
Shipping
All prices are F.O.B. factory. Freight is prepared and will
be shipped in the most economic and safe method unless
otherwise stated. Partial shipments will be made unless
otherwise agreed upon by the purchaser. Approximate
shipping costs can be provided at time of order.
Return Authorization
First Mobile Technologies must be contacted and a
Returned Authorization provided prior to submitting any
product or goods. The Return Authorization number must
be clearly identified on the outside of the package. The
return of products that were a result of customer ordering
error will be subjected to a 20% restocking fee. Customer
is responsible for all return shipping charges. Unauthorized
returns will be refused.
www.firstmobiletechnologies.com œ
WARRANTY STATEMENT
First Mobile Technologies warrants to the original purchaser
of our products that at the time of purchase our products
will perform to its specific ratings and will be free from
defects in materials and workmanship under normal use.
The warranty period shall begin at the time of delivery.
First Mobile Technologies warrants its vehicle mounting
equipment for five years. Docking stations and electrical
parts are warranted for one year only. First Mobile
Technologies will repair or replace, without charge, any
of our products that fail due to defects in material or
purchaser’s
is the original exclusive
Mobile Technologies’
workmanship. This
remedy under First warranty.
This warranty does not apply to: failure due to damage,
misuse or abuse (such as excessive force, improper
installations, or application of power in excess of specific
ratings). This warranty also does not apply to: damages
resulting from (i) accident, neglect, negligence, vandalism, fire,
riot, war, or Acts of God; (ii) structural or other modification
or alteration without prior express written authorization
from First Mobile Technologies; (iii) repair or attempted
repair by unauthorized persons; (iv) replacement of original
components with substitutes without prior written authorization
from First Mobile Technologies; (v) failure to perform routine
preventative maintenance as customarily accepted within
the industry; or (vi) exposure to corrosives, containments,
chemicals, salt or atmospheric or environmental conditions.
OTHER THAN THE WARRANTIES SET FORTH ABOVE, FIRST
MOBILE TECHNOLOGIES EXPRESSLY DISCLAIMS ALL
OTHER WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY,
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY, WARRANTY OF FITNESS FOR ANY
PARTICULAR PURPOSE, WARRANTY BY DESCRIPTION OR
SAMPLE, OR ANY WARRANTY ARISING BY USAGE OF TRADE,
COURSE OF DEALING, OR COURSE OF PERFORMANCE. NO
AGENT OR EMPLOYEE OF FIRST MOBILE TECHNOLOGIES
OR ANY OTHER PERSON IS AUTHORIZED TO ALTER OR
ENLARGE THESE WARRANTIES, EXTEND ADDITIONAL
WARRANTIES OR AMEND THE DISCLAIMERS SET FORTH
HEREIN ON BEHALF OF FIRST MOBILE TECHNOLOGIES.
FIRST MOBILE TECHNOLOGIES’ LIABILITY UNDER THIS
LIMITED WARRANTY DOES NOT EXTEND TO LOSS OF
TIME, INCONVENIENCE, LOSS OF USE OF A VEHICLE (OR
LOSS OF PROFITS RESULTING THEREFROM); INJURY TO
PROPERTY OR PERSONS, OR ANY OTHER SPECIAL, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
All claims under this Warranty must be submitted in writing to First Mobile
Technologies within the warranty period as stated herein.
1.800.330.5399
44
ce
=
U
r
O
D!
co
D
O
=A
QO
O
=)
=
D
=)
=
U)
First fS Mobile Technologies
Our History
Founded in 1994, First Mobile Technologies provides full turnkey
hardware solutions for integrating mobile computers, mounting equipment
and communication systems into environments requiring rugged
technology.
We are uniquely positioned to serve the public safety, utility,
transportation, government, military, healthcare, manufacturing, industrial,
oil and gas, and marine markets—in addition to many others.
As part of a $10+ billion organization, First Mobile Technologies has
the support of strong financial and management resources to provide
the latest mobile technology and equipment installations in a customer-
focused environment.
First Mobile Technologies specializes in a full range of mobile and
mounting hardware products that includes non-rugged and rugged mobile
computers, docking stations, mount systems, communication equipment,
antennas, cable, power distribution centers, proprietary voltage protection
units (patent pending) and much more.
We are proud to be the only turnkey mobile computer hardware company
in the industry that manages the entire process from designing and
manufacturing customized hardware solutions to providing wiring and
complete installation services.
In serving your needs, our turnkey approach allows for a seamless
integration of not only the mobile computer solutions, but also the
complete vehicle upfit package—making First Mobile Technologies
unmatched in the industry.
www.firstmobiletechnologies.com œ 1.800.330.5399
45
=
=
U
=e
O
D!
co
D
O
=A
Q
O
=)
=
D
=)
rr
0)