Document text
INSTRUCTIONS
CONTENTS
CATALOG
Warmly Suggestion_____________________-___--_---_---------------- 04
PAT OR ae ee ee ee ee ee ee ee eee te ee ee ere 05
1.Front Panel Function Instruction ___________-.-__----_---_---___- 06
2.Panel button control instruction ________________________-______- 07
3.Remote Control Function --------------------------------------- 09
4.Main menu touch operation ------------------------------------- 11
5.SETUP FUNCTION OPERATION ____________-_-_-__-____ eee. 12
6: RDS touch operation .ccccccccsecccecccecoseccssscceccseccsecusces 15
7.DISC PLAY TOUCH OPERATION ____________________ 17
8.DVD function operation --------------------------------------. 20
9.VCD/MPEG-4 function operation --- ----------------------------- 23
10.CD function operation ------------------------------------- 26
11.MP3/USB/SD card operation -------------------------------- 28
12 Other Play Mole- eee 29
13: Trouble Shøoling-=<=-==><===<=s=savndsendskesenndssndenndenesen: 30
TND ep 31
15.Speci fications EE ENE EE EE ENE 32
TN see ee 33
17.Setup Need Password ------------------------------------------- 33
INSTRUCTIONS
WELCOME
Thank you for enjoying our serirs of digital car A/V product.
To properly use this product, please go through this instruction manual for installation
and operation, put it in a safe place for future use!
WARNING
1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should
wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you
place it inside the unit, it will cause the unit to go into an error and will not play the
disc. Please ask professional to clean the laser.
2. Playing the radio at higher volumes for a long period of time may cause hearing
issues. You should play this unit at a moderate listen level.
3. This unit is set up by precision parts. If you open up this unit, you will void any and
all of your warranty.
4. Please do not touch LCD display with any hard object so that you prevent it from
getting scratched or damaged.
5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle
lock out wire so that you will not be allowed to watch a video while driving down the
road.
6. This unit is meant for a 12V power and negative ground system from a vehicle.
NOTE:
We keep improving this product all the time. There may be some changes in it that are
not in this manual.
INSTRUCTIONS
16.ACCESSORY
Warranty card 2PCS
17.SETUP NEED PASSWORD
Setup need password
* During actual operation, when you enter TV setup,
system setup, radio area and touch calibration, you
need to enter the password "888888".
* DVD Parental control function: The default set
for DVD is #8 adult, which means all grades of
DVD can be read without entering password.To
change the default grade, you need to follow the
below procedure: Press SETUP button on the
remote, display will show the system set up menu
and the submenu,select password and enter
0000, you will be able to choose the DVD
grade as default.
33
INSTRUCTIONS
15.SPECIFICATIONS:
PT Ne DC 12V
Power range --------+s+++xxxx 2 s000nnannnnnrnnnnnnnnnnnnnnnnrnnnnnnnnnnnnnnnnnnnnnrnnnnnnnnnnnnnn 10.8-16.0V DC
Max ODE EE EN asiasia 10A
Dimensions -----------++++++++22222220nnn000000nnnnn annan nt tt ttrt ttnn tetetete 155X182X53MM
Ground SyStem---------------==---===sx-220n00rnnnnrrnnnnrrnnnerennnnnrnnnnnnnnnnnnnnnnnnnn Negative ground
Amp Rating ------------++--++0222-000000000nnnnnnn0nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 85 Watts x 4 Channels
FM tuner
European frequency range -----------------------+++4+++++++144441151111 1111111111111 87.5-108MHz
USA frequency range--------+++++++xxxxxx0n0nnnnnnnnnnnnnnoonnnennnnnnnnnnnnnnnnnnnnnennn 87.5-107.9MHz
Signal/Noise ratio ----------------->s0seeeoennnnnnnnnnnnnnononnrnrnm mann annan nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 55dB
Stereo SANN 30dB
Search station Volt------------------:--++:-:eeeeeee eee e eee e eesti 20-30dBuv
Distortion rate EEE 1.5%
AM tuner
European frequency range -------------------------+----+-1-4111111 11i 522-1620KHz
USA frequency range -----------=++----==aaaxxnnnnnnnnrrnnnnn renner nrnnennnnrernnnnn eneren 530-1710KHz
Limit noise Sensitivity ----------------------s0000nnnnnnnnnnnnnnnnnnnnnnnnnnn ence eters 32dB
DVD PLAYER
Signal/Noise ratio -----------------+++++--+++ssee reese eee knee nn eee eee treet 70dB
Frequency response----------------+=++xx-xxxxxxx000000nnrnknnnnnnnn tmnt ttrt 111mm 20Hz-20KHz
32
INSTRUCTIONS
FEATURES
DVDPLAYER
1.MPEG-4 Decoder Technology
2.Compatible with MP4(AVI/5.X), DVD(DVD-R/DVD-RW), VCD,SVCD, CD-RW,
WMA, MP3,JPEG
3.Supporting Multiles Subtitles, Angles, Languages
4.Child lock function
5.4-Channel Audio Output
6.Pause, play, UP/Down, Stop, Zoom, PBC Function
RADIO
1.AM/FM Radio Tuner
2.30 Radio Preset Stations (18FM, 12AM)
INSTRUCTIONS
1.Front panel function instruction
©
N
(| 3055 TOER CM] MULTI-MEDIA DISC PLAYER wim 7-INCH WIDESCREEN TFT MONITOR
(GR) (0) CEM
ane} BON AN DBAS viv | BV9555 | via MUTE OPEN |
I dr 1. í í $ È
0 O © © © © ODO
1. SOURCE Button
2. DBAS Button
3. VOL - Button
4. VOL + Button
5. MUTE Button
6. OPEN Button
7. RESET Button
8. USB Slot
9. A/V AUX External Input
10. Remote Control Receiver
INSTRUCTIONS
14.WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
@ Red - ACC ON (+12V)
e Yellow — 12 V Constant
e Black — Ground wire
@ Blue - Power Antenna / Remote Amp Turn On
@ Orange — Back-Up Camera Trigger (+)
Ground. Wire marked SPEAKER (-) must be connected with(-) SPEAKER,
or else,the product may be damaged.
E
NOTE: Be sure the unit is connected to a 12Volts Battery with Negative Å j
f
Memory + Yellow
| Connect to Power Antenna or Connect to battery oF +12Vv of
i Blue Remote control for Amplifier Power Source that is always live.
© Ground- Black
Orange CCD OFF
Connect to car reversing switch
12V+ Red
Pink Braking wire (Optional) Connect to ignition key Switch
WHITE
/BLACK
Left front Right front
GREEN PURPLE
GREEN PURPLE
/BLACK /BLACK
Left rear Right rear
Note:
@ Grey/Grey black - Right front speaker (+/-)
@ White/White black - Left front speaker (+-)
è Purple/Purple black - Right rear speaker (+/-)
@ Green/Green black - Left rear speaker (+/-)
@ Pink — Parking Brake (-)
ful
|
NN
Hal
ACHR
i
Connect to Ground terminal ™ B:
T Dark grey with red-white tip: front RCA output (red right white left)
Grey with red-white tip: rear RCA output (red right white left)
Black with red-white tip: AUX audio input(red right white left)
Brown with brown tip: subwoofer output (optional)
C:
Black with yellow tip: external video input
Grey with yellow tip/dark grey with yellow tip:2 channel video output
Brown with yellow tip: CCD video input
Black with black tip: USB wire (optional)
D:
Radio antenna
Brown with yellow tip: back sight video input (optional)
SWC wire: black---steering wheel ground wire
brown—steering wheel
White— steering wheel
The “PARKING BRAKE” wire must be connected to the parking brake system
of your car. When the parking brake is engages, the LCD will be allowed to view
your video. If not, the screen will produce an image saying, “PARKING BRAKE”.
This is a safety feature designed for the driver not to watch a video while driving.
The video output on this unit will not be affected by this.
31
INSTRUCTIONS
13. TROUBLE SHOOTING
PROBLEM CAUSE SOLUTION
Check whether power fuse
melt or not
Change fuse same as the old one
Can not power on
Some factor cause MPU wrong | Press RESET button on the panel by pen
operation point, then, power on
After ignition
switch off, setting ignition line ACC and power Reconnect line
information all lose] line anode pole BAIT
Wrong connection between
Remote control no | No enough power supply
Change battery of remote control
function from battery 5 4
Improper set of length of
Poor performance ;
antenna, poor connection of
of radio station
Check whether antenna is connected or not,
or poor connection
antenna grounding
Eject disk ,then, slot in new
disk.
Change new disc
Can not load disc There is a disk inside
Disc is scratched
Can not play disc | Put wrong side of disc into unit | Slot in the disk with sign side up
Lens has dirty Clean lens by lens clean disc
Can not switch There is only one language/ If disk is not with multi-language/subtitle, it
language/subtitle | subtitle in disc cannot switch language/subtitle
Video line between unit and
TV is not properly connected Recon eet ance
No image
30
INSTRUCTIONS
2. Panel button control instruction
1. SRC Button
Short press this button to power on . Long press this button to power off .
2. DBAS Button
Press this button to bass on/off.
3. VOL - Button
Press this button to reduce the volume.
4. VOL + Button
Press this button to increase the volume.
5. MUTE / TFT on/off Button
Press this button to shut off the sound output, re-press this button can resume the sound
output, long press this button can turn off the TFT LCD display.
6. OPEN Button
Press this button can eject the disc.
7. RESET Button
Press this button and this unit will be restored to the initial state.
8. USB Slot
Connect the USB memory to this socket, and the unit can play music format files
supported by this unit in the USB memory.
9. A/V AUX External Input
External connection for A/V input.
10. Remote control receiver
It is able of receiving infrared signals launched by the remote control matching the nuit.
INSTRUCTIONS
BASE
11. SD Slot
12. Disc Slot
13. Slot indicator light
INSTRUCTIONS
12.Other mode
AUX IN OPERATION
Please link video socket input with AUX video input jack, and link audio
input with AUX audio input jack.
This unit has one video input and one pair of audio input.
In main interface, touch fu] to enter the follwing interface:
can slide the panel upward or downward
_ DBAS | | LOUD | |
EQ:touch this button to switch mode as follows: POP-ROCK-CLASS-CLOSE
DBAS:click this button to turn on/off subwoofer.
LOUD:click this button to turn on/off LOUD.
MBP:click this button to enjoy the best music effects in different position.
STD:click to resume standard video.
Back:click this button back to previous interface
CCD (back- up camera)
If there is a back-up camera installed into your car, please link the back control
line” back” of the unit with camera control port, and link video output with
camera video output.
When you are backing up the car, the unit will auto switch to rearview mode.
(As the following picture)
mér
Rearview picture while backing up car
29
INSTRUCTIONS
11.MP3/USB/SD card operation
1. Insert SD card or USB, MP3 disc; click the name of the song directly to select the song
you want to broadcast. If there are pictures or video document in the disc or SD card,
you can select the relative icon to broadcast.
2. Playback MP4 files,the touch screen MU into the MP4 format,you can click directly
Or through remote control and touch button to choose the direction you need
MP4 repertoire.
3. This interface of DVD touch function will display if you click on KFY
(Please refer to the instruction of DVD touch function)
NOTE: By a remote control D/S stop button to return to the playback screen.
(1). Pause play
In playing mode, press Pll button on remote control, or Pll touch button on display to
pause. Press again to back to normal play.
(2).Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or »» / 44 touch button on
display to choose nex t/ previous song.
(3).Speed forward/ backward
In playing mode, long press >» /«<button to speed forward/backward.
Each time press the button , the changing speed of forward/backward as below:
X2 — X4 — X8 — X16 — X20
t— Play
Note: it also can be worked by the "forward/backward"button on the screen
(4).Repeat play
In playing mode, press AMS/RPT button to excute the following repeat function.
Single repeat — Directory Search — all repeat — repeatedly play off
Hj
Note: it also can be worked by the "repeat" button on the screen.
28
INSTRUCTIONS
3. REMOTE CONTROL FUNCTION
A iB) 3. SOURCE Button
Press this button to choose audio sources.
1
5 8 4. EQ Button
= El Press this button to choose POP, ROCK, CLASS,
7
6 10 EQ off.
5. SEEK + (>>) / SEEK - (<< ) Button
Press this button to manual turning, speed
or quick back, previous song and next song.
9
SPACE
6. VOL+(>)/VOL-(-)
Press this button to increase or decrease
volume level.
SUB
AUDIO TITLE
PBC a) SLOW | | ANGLE
Q ENTER >) SETUP
OSD Cw) ZOOM \ MENU
7. SEL Button
Press this button to choose sound feature.
11
12
18
19
22
[24]
26]
8. LOUD Button
Press this button to startup LOUD function.
E] POWER ON/OFF {H AMS/RPT
H MUTE oe 9. BAND - P/N Button
El source AUDIO l !
E] Eo El SET PLAYING TIME In radio mode, press this button to choose band.
E SEEK+/SEEK- [H SUBTITLE In VCD, DVD mode, press this button to choose
D voL+/voL- Er] PBC/MENU AUTO, PAL or NTSC system.
SEL B] UP/DOWN/L/R ENTER
E Loup El SLOW 10. LOC/RDM Button
El BAND/ P/N EJ ANGLE In radio mode, press this button to switch
= LOC / RDM = Ap between local and direction. In VCD, CD mode,
STOP OSD :
Boerne E zo press this key to randomly play.
27
= al ed MEN 11. STOP Button
Press this button to stop playing.
12. PLAY/PAUSE Button
LEONE Press this button to switch between play and
BE s once to switch on, press again to pause. In stop mode, press this button to play.
switch off.
13. ST/ PROG Button
In radio mode, press this button to choose
stereo or mono station. In audio mode, it
can help STOP button to programmed play.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
INSTRUCTIONS
14. 0-10 + Button
Press this button to choose desired song,
section, preset stations.
* Decimal numbers, for example the 19th
song, press 1,9 button;
* Centesimal numbers, for example, the
120th song, press 1,2,0 button.
15. AMS / RPT Button
In radio mode, press this button to browse
stored stations. In audio mode, press this
button to play repeatedly.
16. TITLE Button
In DVD mode, press this button to play
back to the top menu of disc.
17. AUDIO Button
In DVD mode, press this button to switch
language of dialogue. In VCD mode, press
this button to choose left track, right track,
and stereo.
18. SET Playing Time
In DVD mode, press this button, you can
define playing time.
19. SUBTITLE Button
In DVD mode, press this button to switch
language of subtitle.
20. PBC Button
In VCD mode, press this button to display
all song menus, work with number button
to choose songs.
21. UP, DOWN, LEFT, RIGHT, ENTER
Button
In DVD mode, press this button to move
cursor up, down, left, right to choose item
in menu. Press the enter button to confirm
choice.
22. SLOW Button
In audio mode, press this button to slow
backward and slow forward.
23. ANGLE Button
In DVD mode, press this button to change
play angle.
24. SETUP Button
In audio mode, press this button to choose
different set items.
25. OSD Display
Press this button to display the title chapter
and the left time.
26. ZOOM Button
In DVD/VCD mode, press this button to
ZOOM in.
27. MENU Button
Press button to back to the main menu.
BATTERY CHANGE
When control distance of remote control
becomes shorter or no function, please
change battery. Please confirm polarity
before change.
One hand press stopper, then pull out battery.
a Ne
Put battery into controller.
%
Insert battery holder into controller.
INSTRUCTIONS
9. Items choose
(1)In playing mode, press the number button on remote control directly to input
any item number, the unit will auto play the inputted program.
(2)For above 10 programs ,you can via number button 10+ on remote control,
work with number button 0--9 to choose.
Note: press the number button 10+ once to be 10+ program, and press 10+button
two times to be 20+program, just as follows.it also can be worked by the number
button on the screen.
10. CD Program Play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follows:
When CD is playing, press ST/PROG button, then the display shows:
PROG
TC TC TC TC
I ETE Diana DE SOE (a oe
NE N Bb. 24. 10 1 14 1 >
GN SE FE a (a OE
4 1 8 Z _:_ AE ee 16 1 >
PLAY DELETE
Input the number of the song you want to program by the remote control, program the
first song, input your desired song, for example, the sixth song, and press number button
6 on the remote control. Program the second song, press w button move the cursor to
2| J]. Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press pil button to program play.
Back to the normal mode, press the ST/PROG button, then press pil button.
Note: This function can only be worked by the remote control.
27
INSTRUCTIONS
10.CD function operation
1.Disc play
Slot in CD disc, unit will play it automatically. If disk is in slot , touch DVD icon
on the main menu can to play.
2.Previous /next song play.
In playing mode, press SEEK-/SEEK+ button on the remote control or"
previous/next"button on screen to choose.
3.Speed forward/ backward
In playing mode, long press »»/ m44 button to speed forward/backward. Each
time press the button , the changing speed of forward/backward as below:
X2—X4— X8— X16—>X20
Play
Note: it also can be worked by the "forward/backward"button on the screen.
4.Repeat play
In playing mode, press AMS/RPT button to excute the following repeat function.
Single repeat — all repeat — repeatedly play off
tl
Note: it also can be worked by the ”repeat”button on the screen.
5.Randomly play
In CD playing mode, press RDM button on remote control , the unit will choose
any song to play. Please press RDM button again if want to back to the normal
play mode.
6.Pause play
In playing mode, press pii button on remote control to pause play. . Short press
it again to resume the normal play.
Note: it also can be worked by the related button on the screen.
7.Stop play
In CD playing state, first time press m/} button to enter pre-stop state, and
presspil button to continue to play. Press m/) button two times continously to
enter stop state completely, while press the play button to start from disc songs.
Note: it also can be worked by the related button on the screen.
8.OSD
In playing mode, press OSD button on remote control to display all the
information of the current playing disc.
Note: it also can be worked by the"sreen display" button on the screen.
26
INSTRUCTIONS
4.Main menu touch operation
Read IPod TV
Radio
BLUETOOTH
External memory
Input
Bluetooth Settings
INSTRUCTIONS
5.SETUP FUNCTION OPERATION
In the main interface, touch for into following interface.
steering wheel setup Touch calibration setup
— mørt
a Mt | GENERALSETUP à —— |
time setup
system setup =] +
TV setup 2 Ez]
Note: Touch corresponding function, it will display in yellow words reminding,
and blue background reminding.
TIME DISPLAY AND ADJUST:Time display: Touch main menu into adjust
mode, press time setup button, the corresponding function will be display in
yellow words.Press “+” on hour to add hour, press “-” to reduce hour;Press “+”
on minute to add minute, press ”-” to reduce minute.
NOTE: Touch the correspondence function, will be display in green background.
The unit include two times system: Europe time (24 hour setup), America time
(12 hour setup), when show the AM mark it indicate morning time, when appear
the PM mark, it show the time of afternoon.
System setup:Click this button,then input password "888888".click "ok" into system
setup, press relevant button to choose on /off. Press ”ok” button to confirm.
radio setup:click "ok" into radio setup. It provides 5 areas (Europe, American 1,
American 2, Japan, Russia).
Language setup:Click into choose "Simplified Chinese"/"ENGLISH"
steering wheel setup:click into steering wheel setup.Please refer to (steering
wheel function operation instructions)
Touch calibration:
Touch the center of "+" to calibrate screen when the
position misgrated.
INSTRUCTIONS
15. VCD Program Playing
In VCD mode, you can set playing sequence of songs by program play function.
The program playing operation steps are as follows:
In VCD mode, press ST/PROG button, display will show:
PROG
TC TC TC TC
a SE ne R ae EE 13 7.
EP 6 __:_ 10__:__ 14 1 _
< EE ee EG a EG 15 a
4 > o EE ge a 16...
PLAY DELETE
Input the songs which you want to programmed by the number buttons on remote
control. For example: Program the first song, input your desires song, for example, the
fourth song, and press number button 4 on the remote control. Program the second song,
press y button move the cursor to 2____. Input your desired song, for example, the
eighth song, press number button 8 on the remote control. Press pil button to program
play. Back to the normal mode, press the ST/PROG button, then press Pil button.
Note: This function can only be worked by the remote control.
25
INSTRUCTIONS
9.Slow play
In playing mode , press SLOW button on remote control to slow play , the level
of order as below:
Slow %----slow1/3---slow1/4---slow1/5---slow1/6
Play---slow1/7- |
Note: this function can be only worked by the remote control.
10.Zoom in/out picture size
In playing mode, press ZOOM on remote control to zoom in / out picture, the
level of size as below:
Zoom in 2---zoom in -3--zoom in 4---zoom in1/2
Zoom in off---zoom in 1/4—zoom1/3
Note: 1. this function also can be worked by the “zoom” button on the screen
2. move zoomed in picture via up/down/left/right cursor.
3.zoomde out picture can not be moved.
11.OSD
In playing mode, press OSD button on remote control to display all the
information of the current playing disc.
Note: this function also can be worked by the ”screen display” button on the screen
12.Items choose
In playing mode, press the number button on remote control directly to input
any item number, the unit will auto play the inputted program
For above 10 programs ,you can via number button 10+ on remote control,
work with number button 0—9 to choose..
Note: press the number button 10+ once to be 10+ program, and press 10+button
two times to be 20+program, just as follows.it also can be worked by the number
button on the screen.
13.Sound track switch
In VCD playing mode, play AUDIO button repeatedly to switch the sound
track as the following sequence. Touch “AUDIO” button on the display also
can realize this function.
Left sound track----right sound track---mix sound track---stereo
14. PBC (MENU) Play
In VCD mode, press this button then play the PBC and display will show whole menu
in disc, work with number button to choose song. When you are playing either song
of the PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the remote control.
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.
24
INSTRUCTIONS
Learn steering wheel control operation as follows
1.Pls connect the positive pole/negative pole from origin steering wheel control wire
rightly to our unit,power on that unit to that menu as above picture showing,click the
setup button.
rae (STEER GENERAL SETUP |_|
ESKER
EN (00 ME
2. After enter into the setup , click " steering wheel" button like as picture show.
STEERING SETUP
K1
1
4
K2 1
4
3.Enter into steering wheel control setup manu.
4.Make a note for origin car steering wheel control function.
INSTRUCTIONS
STEERING SETUP
2
4 3. 588V 5 6
2 0.235V 3 1. 568V
K1|} 160. o00v
K2| 1 o0.000v 2 0.009V 3 3. 588V
4 3. 490V 5 6
VOL — VOL + SEEK — SEEK +
1 GH- = CH + SRC
ALLOCATE
5. (1)Press the button step by step on car steering wheel control and write it down , then
click alloc ate" button on our unit like as picture show
(2)Click number"2" to choose that function according to car origin steering wheel control
function. STEERING SETUP yy
K1| 1 Tei 2 PWR 3 MUTE
4 MODE 5 CH+ 6
K2| 1 SEEK+ 2 VOL+ 3 CH-
4 SRC 5 MODE 6
VOL — VOL + SEEK — | SEEK + MODE
CH = CH + SRC PWR MUTE
ALLOCATE RESET ENTER
6.(1)As picture indicated,click "voice" in the screen(position 1), then choose the same
word in the choose screen.
STEERING SETUP
Kl 1
4 MODE
K2 XL SEEK+
4 SRO
7.Like picture shows, click position 1 to choose what function button you revise , click
position 2 to make revise to them.
STEERING SETUP
K1
1 3
4 6
K2 1 3
4 6
VOL — VOL + SEEK — SEEK + MODE
sl CH + SRC PWR
2
ALLOCATE RESET. ENTER
8. (1) Like picture show, click " 2 " button in order to keep save, click "1" to return
(2) Click the " 2 " button in the screen, then finish the setup.
(3) Click area 3 to delete all steering wheel control , and reset all steering control function
under re-do the above mentioned
INSTRUCTIONS
9.VCD/MPEG-4 function operation
1.Disc play
Slot in VCD/MPEG-4 disc, unit will play it automatically. If disk is in slot,
touch DVD icon on the main menu can to play.
2.Previous /next song play
In playing mode, press SEEK-/SEEK+ button on the remote control to choose.
3.Speed forward/ backward
In playing mode, long pressp>>i/€< button to speed forward/backward. Each
time press the button , the changing speed of forward/backward as below:
X2 —> X4 — X8 — X16 —> X20
Play
Note: it also can be worked by the "forward/backward" button on the screen.
4.Repeat play
In playing mode, press AMS/RPT button to excute the following repeat function.
Single repeat — all repeat» repeatedly play off
A |
Note: In VCD mode, this function can be worked while shut off PBC .
it also can be worked by the “repeat” button on the screen
5.Randomly play
In VCD playing mode, press RDM button on remote control , the unit will
choose any song to play. Please press RDM button again if want to back to the
normal play mode.
Note: 1.In VCD mode, this function can be worked while shut off PBC
2.This function can only be worked by the remote control.
6.Pause play
In playing mode, press Pil button on remote control to pause play. . Short press
it again to resume the normal play.
Note :this function also can be worked by the related button on the screen
7.Stop play
In VCD playing state, first time pressm/)button to enter pre-stop state, and
press pil button to continue to play. Pressm/} button two times continously to
enter stop state completely, while press the play button to start from disc songs.
Note :this function also can be worked by the related button on the screen
8.System switch
In playing mode, short press BAND/P/N button on remote control, then the
order of system switch as below:
Auto — NTSC — PAL
23
INSTRUCTIONS
14. Angle Switch
If the DVD disc is recorded with multi-angles, you can press the ANGLE button to
switch the angle during playing.
The sequence is as follow:
ANGLE 1 > ANGLE 2 > ANGLE 3
Note:
1. Itjust can be worked by the remote control.
2. Itis only for the DVD disc which has multi-angle.
3. If there is a 2% sign on the cover of the DVD disc. The number in the sign means
how many angles the disc has.
4. You can not switch the angle when slow playing.
15.Multi-Audio
There are different languages of dialogue and audio systems in DVD disc.
If the DVD disc is recorded with multi-audio, you can switch the language of dialogue
and the audio systems when playing.
Press the AUDIO button repeatedly to change the language of dialogue.
Note
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-language.
3. If there isa @)) sign on the cover of the DVD disc, À) means that it was recorded
by multi-language/audio system.
16.Multi-Subtitle
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the SUB-T button repeatedly to change the language.
Note:
1. It just can be worked by the remote control.
2. It only for the DVD disc which is recorded with multi-subtitle.
3. If there is a sign on the cover of the DVD disc |.2.] means that it has several
subtitle.
17. Setup
Press SETUP button, display will show the system setup menu and the submenu, select
the item you want byat» , after selecting the proper item, press A/V /4 /» to press
ENTER to confirm.
Note:
1. Itjust can be worked by the remote control.
2. Some function setting maybe different because of the different model or disc.
3. If the selected language is not recorded in the disc, then unit will show the appointed
language.
22
6. RDS touch operation
In the main interface , touch f into following "radio" interface.
Pre-store stations operation:
Each band can pre-store 6 stations. You can directly click (P1—P6)to choose in
the pre-store stations, and it will display in the screen.
Store stations:
Choose a band and then a station . press longer preset button(p1-p6) to display
the number in the screen.
Back to main interface
Slide the panel upward
Slide the panel downward
APS SEL PTY MUTE TA AF BND
ry ‘Short touch to counter-clockwise adjust FM/AM recive frequency steply;
long touch to auto scan FM/AM atations counter-clockwisely.
CJ ‘Short touch to clockwise adjust FM/AM receive frequency steply;
long touch to auto scan FM/AM atations clockwisely.
‘Click the button to scan preset stations in 1-6button. Press longer to
auto search radio stations, and store the strongest stations in the display
of number button.
feed :click the button into "setup" interface(please refer to” AUX input operation"
instructions in "other mode")
(Gawd Press PTY, when PTY is on, it means there is strong RDS signals output.
:click "mute” button to shut off VOL, and click again to resume the
original VOL level.
Press TA, when TA is on, it means the unit is automatically track RDS radio
| channels.
Press this button to choose radio channels' name, please refer to details user
manual.
:Click the button to choose band:FM1-FM2-FM3-AM1-AM2
19
INSTRUCTIONS
RDS
1. EON (RDS Mark)
Indicate main unit is on auto tracking RDS mode.
2. AF (RDS Auto Tracking Mark)
Indicate radio is auto tracking RDS channel.
3. TA (RDS Signal Increasing Output)
Indicate RDS channel have signal increasing output.
4. TP (RDS Channel Stereo Mark)
Indicate RDS channel is on stereo playing mode.
5. POP.M (RDS Channel Mark)
Indicate RDS channel name.
I. RDS Tracking System
Press AF button in FM mode, and then press «4 /»» last 2 seconds, RDS will auto search
channel up and down, it will stop searching when RDS channel be founded, but “AP”
will keep remaining on the screen and waits for the next traffic emergency report.
II. RDS Tracking on Playing Mode
In playing mode, “AF” tracking system keeps on opening and waits for traffic
emergency report.
1)PTY: RDS button, press once will show music mode POP, press 1-6 function
memory button, every group have 2 channel.
POPM ROCK M EASY M
LIGHTM CLASSICSM OTHERM
JAZZ COUNTRY NATION
2)Press PTY button twice and then press 1-6 function memory button, every
button have 3 channel.
NEWS AFFAIRS INFORMATION SPORT
EDUCATION DRAMA CULTURE SCIENCE
CHILDREN SOCIETT TELIGION PHONING
TRAVEL
Note: RDS channel in broken line is available.
AF: RDS auto search button, in radio mode also can press this button shortly auto
tracking RDS channel, press this button shortly can cancel RDS function.
TA: In RDS mode, press this button can output TA signal, and check RDS channel is
exist or not, if no RDS signal TFT will show “NO. TA. TP”.
INSTRUCTIONS
8. Slow Play
Press SLOW button on remote control to slow play. The level of slow playing is as
follows. Sequence is: sLOW 1/2 — SLOW 1/3—+SLOW 1/4— SLOW 1/5
PLAY «— SLOW 1/7 «— SLOW 1/6
Note: This function can only be worked by the remote control.
9. Zoom In/Zoom Out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
as follows: ZOOM IN 2 — ZOOM IN 3 — ZOOM IN 4 — ZOOM IN 1/2
ZOOM IN OFF «— ZOOM IN 1/4 — ZOOM IN 1/3
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
10. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
11. MENU Select
In playing mode, press PBC button on remote control to back to the menu, display will
show chapter and section in disc. Work with A /V button on remote control or touch
button on display to choose your desired song. Press Pil button / ENTER button to play.
12. Title Select
In DVD mode, press TITLE button to back to the title menu. Display shows all the titles
of the disc. You can select the chapter you want by the cursor, press play button to play
the chapter.
Note: It just can be worked by the remote control.
13. Program Play
In DVD mode, you can set the sequence of playing by the program function, the operation
is as follow:
PROG
TC TC TE TC
1 [0 1]: [0 3] 5 1 9 1 13 1: >
2[0 1]: [0 6| 6 1 10: > 14 1 >
> a JED Po TE a 15 : >
de 8 fn D. to. 16: >
PLAY DELETE
When DVD is playing, press ST / PROG button, then display shows:
For example, program the first song, input 01, press » button move the cursor to the
second lattice, input desired song, for example, the third song. Program the second song,
press V button, move the cursor to 2 |__|__. input 01, press» button move the cursor to
the second lattice, input desired song, for example, the 6" song (press 6). Press Pil button to
program play. Back to the normal mode, press the ST/PROG button, then presspil button.
Note: This function can only be worked by the remote control.
21
INSTRUCTIONS
8.DVD function operation
DVD play:
Pls slot in DVD disk, the unit will play it automatically. If disc is in slot, touch
DVD button on main menu to play disc.
1.Previous /next song play:
In playing mode, press SEEK-/SEEK+ on remote control or press the ”previous”/”
next”button on the screen.
2.Repeatedly play:
In playing mode , press AMS/RPT button on remote control to start up following
repeat function. Repeat(chapter) — Repeat title — All repeat
repeat play/off
Note: it also can be worked by the ”repeat”button on the screen.
3.Items play:
In playing mode, directly press any program sequence in the number button of
remote control, then unit will auto play the input program.
For above 10 programs ,you can via number button 10+ on remote control,
work with number button 0---9 to choose.
Note: press the number button 10+ once to be 10+ program, and press 10+button
two times to be 20+program, just as follows.
Note: it also can be worked by the number button on the screen.
4.Pause play
In playing mode, press pil button on remote control to pause play. . Short play
it again to cancel pause, and resume to normal play.
Note: it also can be worked by the related button on the screen.
5.Stop play
In DVD playing mode, press m/>button on remote control to enter into pre-stop
state, then press the button bilto continue to play. Press m/} two times continuously
to enter into stop completely. Then press play button to play from the first song.
Note: it also can be worked by the related button on the screen.
6.Forward/Backward
In playing mode, press longer »»/4 button on remote control to forward/
backward respectively.Each time press this button, the speed of forward or
backward is as follows: x2—+x4-+x8—+x16—+X20
Play
Note: it also can be worked by the “forward/backward” button on the screen.
7.Switch system
In playing mode, shortly press the button BAND/P/N to switch system , the
sequence is as follows: AUTO — NTSC — PAL
20
INSTRUCTIONS
7.DISC PLAY TOUCH OPERATION
When playing disc, touch any position of the screen, it will display the function menu;
touch the menu and the operation of relative function will display.
Note: When loading a disc, touch screen function can not be used.
1. Click to choose play/pause
2. Click to reduce the volume
10.
11.
12.
13.
14.
15:
16.
17.
21.
22.
2s
3. Click to stop playing
4. Click to choose the speed of quick back
5. Click to choose the speed speeding play
6. Click to leap backwards to play
7. Click to leap upwards to play
8. Click to exit
9. Click to enter the next page to setup
the menu
Click to increase the volume
Audio
Click to display title, chapter, the time
already played, the time left
At MP3 mode, press this button so
you can move the cursor to left/right /
up/down and select the songs which
in the system menu. then press “OK”
button to enter.
Click to enter next page set up menu
In DVD mode, touch this button to
return the directory menu.
Click this button to switch to different
angles of playing picture in the disc.
Repeat play
DVD: Title Repeat > Chapter Repeat —
Repeat play off
VCD: Single song repeat — Full disc
repeat > Repeat play off
MP3: Single song repeat > Directory
repeat > Repeat play off
. Click on this button to enter title menu
. Click this button to choose language,
. click this button and the screen will
display 0-10 button.
Click this button toZoomin/Zoom out
the picture.
Click to enter the menu of operation
for touching.
Back main menu.
INSTRUCTIONS
24.Color adjustment
25.Press this button to adjust
angles of the monitor
26.Click to select your desired song or chapter
27.Return to the menu one level
Note:
1. When playing VCD, if PBC FUNCITION is on, repeat play is not available.
2. PBC is only suitable for VCD.
3. For VCD disc with play memory, you can use the PBC function;
4. Press PBC in the remote control, Play/Off PBC, press one time to play from the first
song;
5. When PBC is on, you can choose speed forward or backward, leap forward or
backward, but repeat play is not available.
6. When PBC is on, choose casual play, scan play or search play, PBC function will close
automatically.
18
INSTRUCTIONS
In DVD interface, touch button into the audio/video setup interface
as following:
(note :the button position will be concave on the screen when you touch it)
VOL [Wm | +07
BAS BER EEEORREEEE 00
TRE FREE 00
BRI KEHEE PEELE 00
CONHEHHHGE HENNE 00
OOL HEHEHE HENNE 00
Ne EERE EE 00 SHA TLL HEHHEE 00
FAD BEG HEEOHREEEE 00
LOUD| |DBAS] | mer | | EQ:0FF |
STDY|
BRIG| |SOFT| |SHAR|
Audio mode video mode
Volume:click "volume"to turn down sound;click the related character on right
to turn up sound.
BASS: click "BASS"to turn down bass effect;click the related character on right
to turn up bass effect.
ALT: click "ALT"to turn down alt effect;click the related character on right to
turn up alt effect.
L/R: click "L/R"to choose left speaker output,click the number on right to choose
the right speaker output .
F/R: click "F/R"to choose front speaker output,click the number on right to choose
the rear speaker output.
LOUD: loud on/off.
BASS: bass on/off.
MBP: click this button to enjoy the best music effects in different position.
EQ(on/off):touch to switch modes as follows:POP-ROCK-CLASS-CLOSE.
Brightness:click the left and right edge of the "brightness" strip to adjust the
video’s brightness.
Contrast: click the left and right edge of the "contrast" strip to adjust the
video’s contrast.
Color: click the left and right edge of the "color" strip to adjust the video’s color.
Sharpness: click the left and right edge of the "sharpness'strip to select the
best output effects.
Own setting: click this button to choose your own brightness,contrast,
color,sharpness.
Standard:click this button back to the default settings.
BRIG:click this button to increase the brightness,click it again back to the
original station.
SOFT:click this button to make the video output soft,click it again back to
the original station.
SHAR:click this button to increase the sharpness,click it again back to the
original statio.
19