Document text
[ DaySequerra
HD Receiver
HD) Radio”
M4.2Si
User Manual
Welcome
Thanks for purchasing the DaySequerra M4.2S! AM-FM Digital Radio Receiver. We design and build
all of our DaySequerra products to be completely reliable and easy to use, so you can concentrate on
producing great sounding broadcasts, not struggling with complicated equipment or difficult to use
product manuals.
While the M4.2SI has been designed to be straightforward to use, we do suggest that you spend a few
minutes familiarizing yourself with the features and operational functions that are contained in this
manual.
DaySequerra has been building broadcast quality products since 1989. The technology developed for
the M4.2SI, and all of our products, has evolved through a process of user feedback, extensive
listening, field-testing and careful refinement.
In the event that you encounter any technical or operational difficulties with this or any DaySequerra
product, please feel free to contact us at 856-719-9900. Our office hours are from 9 to 5 ET, Monday
through Friday. Or you can email your questions to: [email protected].
Also, please remember to visit our website www.daysequerra.com for warranty registration and the
latest DaySequerra product information.
We have worked hard to ensure that your DaySequerra M4.2SI HD Radio Receiver will reliably serve
as a flawless link between the transmitter and your monitoring facility, or as the primary broadcast
reference source in your studio.
We sincerely hope our products help you achieve a new level of excellence in your work!
W
David V. Day
and the DaySequerra Team
DaySequerra | 154 Cooper Road, Building 902 | West Berlin, NJ 08091 | V 856-719-9900 | F 856-719-9903 | www.DaySequerra.com
Table of Contents
Important Safety Information 4
service Information 4
Introduction 4
M4.2Si Key Features 5
M4.2Si Technical Specifications 6
Unpacking and Installing 7
Operating Description - Controls and Indicators 8
Front Panel 8
Rear Panel 9
LCD Display 10
System Menu 11
Alarm Configuration 11
WebServer 16
Restore Factory Settings 22
Three Year Warranty 23
M4.2Si - Features
Robust 24/7 performance - stays locked to AM-FM analog, HD-1 or selected
multicast stream during power or I2E interruptions; does not automatically
revert to analog!
XLR balanced analog outputs +4 dBm @ 100% modulation; high-performance
headphone monitor delivering greater than 1W into 8-ohm
M4.2Si TimeLock™ upgrade provides 24/7 measurement of MPS and HD-1
audio streams time-alignment; front panel LED and LCD, and Remote
Dashboard displays; rear panel alarm tally-email notification for out-of-
tolerance conditions - order model M4.2Si TimeLock™
All rights reserved DaySequerra Corp. Copyright 2009.
All logos and trademark used herein are the property of their respective owners. DaySequerra
Specifications subject to change. M4.2Si User Manual
M4.2Si
Important Safety Information
e Indoor use only. Not for use in wet or damp environments.
e Maximum Relative Humidity: <80%
e Class | Equipment (grounded type)
e Electrical rating: 100-120/220-240V~50-60Hz 18W
e Fuse Rating: 2A 250V 20MM
e AC Mains supply voltage fluctuations are not to exceed +10% of the nominal voltage
e Operations temperature range -40°C to 70°C
e Maximum altitude: 3000m (9843ft)
e Equipment suitable for continuous operation
e Weight: 5.4kg (12lbs) equipment only; 8.2kg (18lbs) shipping
Important Note: Please connect your M4.2Si to an uninterruptible power supply (UPS) to provide
other protection against power surges and brownouts.
Service Information
The DaySequerra M4.2Si contains no user serviceable components inside the unit. Please contact
DaySequerra for repair and upgrade information. In the event that your unit needs to be returned to the
factory, contact us for a return authorization number. The monitor ID and firmware version is
momentarily displayed at start-up for your convenience. Please visit www.daysequerra.com and
register your new M4.2Si so we can keep you informed of the latest hardware and software
updates.
Introduction
DaySequerra's new M4.2Si AM-FM Digital Radio Receiver is the most capable next-generation HD
Radio™ platform available today.
With the M4.2Si you can monitor audio and data from your analog and HD Radio broadcasts including
FM multicast channels HD-2 through HD-8. The M4.2Si has no AUTO-Blend function so it stays locked
to the stream you've selected even if the broadcast or your AC power is interrupted. Hear your HD
Radio time-alignment using the M4.2Si built-in Split-Mode. With the optional TimeLock™ Monitor, the
M4.2Si will even send an email if your MPS and HD-1 streams are out of time-alignment. The Remote
Dashboard webserver simplifies your under 3-minute setup and provides total remote control of the
M4.2Si using any browser on your Ethernet network. Plug and Play
Please read this manual thoroughly before operating your M4.2Si.
4 DaySequerra
M4.2Si User Manual
M4.2Si Key Features
Robust 24/7 performance - stays locked to AM-FM analog, HD-1 or selected multicast stream
during power or I2E interruptions; does not automatically revert to analog!
Bright LCD front panel display of RBDS and HD Radio PAD, along with network and alarm
conditions
Full-time AES-3 Professional digital audio output even when tuned to non-HD signal
XLR balanced analog outputs +4 dBm @ 100% modulation; Split-Mode so you can hear your
HD Radio time-alignment
High performance headphone monitor delivering greater than 1W into 8-ohm
Remote Dashboard provides total remote control and display of RBDS and all HD Radio
PAD/SIS, network and alarm conditions along with audio level, digital audio quality and carrier
quality indications
Webserver compatible with any browser on your Ethernet network
Rear panel alarm tallies for loss of Audio, Carrier, and OFDM Lock and Multicast Loss
Optional TimeLock™ Monitor for time-correlation of MPS and HD-1 streams
Alarms can be emailed to your phone
Remote reset via rear panel GPI
Front panel reset — no rear panel power switch
Remote updates tolerant of high latency networks
Direct file upload for easy off-line updates
Use your wireless router for remote control using your Android® or iPhone®
Also available with RCA outputs - order model M4.2Si-RCA
[LaySequerra
M4.2Si User Manual
M4.2Si Technical Specifications
AM: 520 kHz to 1720 kHz in 9 KHz or 10 kHz increments
RF Tuning Range FM: 87.9 MHz to 108.1 MHz in 100 KHz or 200 kHz
increments
AM: <20 dBf (-100 dBm) for SNR -20 dB referenced to
30% modulation
FM: <15 dBf (-100 dBm) for SNR -30 dB referenced to 100%
modulation
AM: > 100 dB for SNR -20 dB
FM” > 100 dB for SNR -30 dB
AM: +/- 1 dB, 40 Hz to 15 kHz
FM: +/- 1 dB, 20 Hz to 20 kHz
FM De-emphasis 75 uSec
MAATA O OUPS E EE +4 dBm into 600 ohm at 100% modulation
Balanced XLR
AES-3 Professional, 1100 transformer-isolated on XLR
RF Usable Sensitivity
IF Rejection
AF Bandwidth
Digital Audio Output connector
0 dBFS <.005% THD+N using HD Radio™ input
HD Radio Hybrid Acquisition <4.5 seconds
MPS Left (on R output) and HD-1 (on L output) on Analog,
HD Radio Split Mode Digital and Headphone audio _
Audio, Carrier, and OFDM HD Radio Lock
PI (Call Letters), PS (Program Service), PTY (Program Type),
a RT (Radio ies
SIG, an Extended SIS, AAAS, and LOT; PAD including
RBDS Data
HD Radio PAD and SIS Data station long and short name, program type, song file artist,
album, genre and comment fields
Evonne Operating Temperature: +41 to +105 F (+5 to +40 C) Storage
Environmental Temperature: -13 to +140 F (-25 to +60 C) Relative Humidity:
Maximum 85%, non-condensing
1 RU EMI-hardended: 19” (482mm) W x 14” (355mm) D x
1.75” (44mm) H
M4.2Si RCA — Unbalanced analog and digital audio outputs
on RCA connectors installed in place of standard XLR
Connectors.
M4.2Si Options M4.2Si TimeLock Monitor — Provides time-alignment
correlation for MPS and HD-1 streams; rear panel AUDIO
ALARM tally and email notifications. Field-installable
upgrade.
DaySequerra
M4.2Si User Manual
Unpacking and Installing the M4.2Si
Immediately upon receiving your M4.2Si, please make a careful inspection for any shipping damage. If
damage is found or suspected, please notify the carrier at once and then contact your dealer. The
DaySequerra M4.2SI is shipped in one carton, which contains: the M4.2Si unit, an AC power cable, a
Torx'™ T-8 L-key and this User Manual.
We strongly encourage you to save the shipping carton and shipping materials supplied with
your M4.2Si. They are specially designed to properly protect your M4.2Si, and in the event that you
need to return it for service, only these OEM shipping materials can ensure its safe return to our
factory.
We provide a limited 3-year warranty on all of our products, but if you don’t register your unit, it’s hard
for us to contact you when software updates become available. So please take a few minutes to
complete the warranty registration form on our web site, www.daysequerra.com. Thank you!
Rack Mount Installation. The M4.2Si chassis has four rack mounting holes in its chassis and has
been designed to fit in a 19” standard 1RU space. Plastic ‘finishing’ washers are recommended to
protect the painted finish around the mounting holes.
Power Connection. The AC power cable supplied with the M4.2Si must be connected from the
M4.2Si's IEC320 power entry module to an AC mains outlet with a functional earth ground connection.
The M4.2Si has been set at the factory to operate at 120VAC unless otherwise specified on the
shipping carton. The M4.2Si export version is configured for 240VAC operation. Please connect your
M4.2Si to an uninterruptible power supply (UPS) to protect against power surges and
brownouts.
Antenna Input Connections. Separate 75ohm F-type connector is provided on the M4.2Si rear panel
for dedicated AM and FM antennas
Audio Output Connections. Analog audio left and right outputs are on rear-panel XLR connectors
with pin 1 GND, pin 2 + and pin 3 -. The digital audio output is transformer-isolated in S/PDIF format on
a rear-panel XLR connector with pin 1 GND, pin 2 XFMR and pin 3 XFMR. The M4.2Si digital audio
output is 5.1 surround capable.
Ethernet Connection - The M4.2Si Ethernet Port offers the use of DaySequerra’s Webserver by
connecting the M4.2Si to any networked computer with Internet access. The use of crossover cables
can be used in areas where a network connection is not possible. More information on the Webserver
can be found at the end of this manual. The Ethernet port with the aid of the webserver will keep the
M4.2Si up to date on all Firmware upgrades by checking, downloading and installing with the click of
the ‘Check Firmware’ button on the webserver. (An Internet connection must be available for ‘Firmware
Upgrade’ to work. UPON RECEIVING THE UNIT IT IS ENCOURAGED TO ‘CHECK FIRMWARE’
FROM THE WEBSERVER TO BE SURE YOUR M4.2Si IS USING THE MOST RECENT FIRMWARE
AVAILABLE.
[LaySequerra
M4.2Si User Manual
Navigation
The M4.2Si employs a simple 3-button user interface. From the start ‘HomeScreen’ press the center
button once. An arrow will appear next to the frequency. Use the UP/DN arrow button to toggle the
Arrow on the LCD around the different fields on the HomeScreen. Press the Center button to select a
field to change. The arrow will start to flash indicating that the UP/DN arrows are available to change
the value of the field. Press the Center button to save and exit.
M4.2Si Operating Description - Controls and Indicators
Front Panel
89.30 uil Ho-
KUVO - FM AUTO
192.168.252.252
Figure 1.
Status
8
Alarms - illuminated red when an alarm is enabled and flashes red every second when an
alarm condition is active.
HD Locked — Blue LED illuminates when tuner has acquired OFDM (orthogonal frequency
division multiplexing) portion of an HD RadioTM signal and digital carrier S/N > 58dB/Hz,
thereby permitting HD RadioTM digital audio to be valid. HD is displayed in upper right hand
corner of VFD when tuner has acquired OFDM portion of an HD RadioTM signal.
Multicast — Blue LED illuminates when tuner has acquired OFDM of an HD RadioTM signal and
there is at least one multicast signal present.
RF Level - Bi-colored LED: Green indicates strong RF > 40 dB. Red indicates weak RF < 40
dB.
Up Arrow — Momentary push UP from the Homescreen will enter the Headphone volume menu.
Both arrows are used to increase and decrease the volume. From selection mode Press
ENTER again to change a value in any a field indicating a blinking arrow ready. Use the UP
and DOWN arrows to navigate/toggle through the available choices or range. UP Arrow button
tunes the frequency up one increment while tuning to a new station, when held for three
seconds it tunes faster at 1.5x speed. UP selects next stored preset station in PRESETS mode
(no faster mode, one push per preset). Selects next item in other menus and is used for other
functions as described herein. Holding the UP arrow while powering the unit on will restore
factory settings.
Down Arrow — Momentary push DOWN from the Homescreen will enter the Headphone
volume menu. Both arrows are used to increase and decrease the volume. From selection
mode Press ENTER again to change a value in any a field indicating a blinking arrow ready.
DaySequerra
M4.2Si User Manual
Rear
Use the UP and DOWN arrows to navigate/toggle through the available choices or range.
DOWN Arrow button tunes the frequency down one increment while tuning to a new station,
when held for three seconds it tunes faster at 1.5x speed. Down selects next stored preset
station in PRESETS mode (no faster mode, one push per preset). Selects next item in other
menus and is used for other functions as described herein.
Center Button — Used to enter SELECTION MODE and to confirm and save that selection:
Press and hold for 3 seconds to enter SYSTEM MENU. Press and hold for 3 seconds to exit
SYSTEM MENU.
Reset Button — Using a paper clip press the reset button hidden behind the front panel to the
right of the center button to power cycle the unit while holding all presets and other settings in
memory.
Headphones - Accepts any headphone or monitor that has a 3.5mm stereo mini-jack
connection. Volume control is software based, from the home screen by pressing either arrow
button UP/DN to enter the volume control. Press ENTER to exit and save the desired volume.
Panel
AM INPUT
A
DaySequerra M a uL
EE aM q www.daysequerra.com RIGHT DIGITAL orbs en fae ma rt npr © OPAN Cop AC INPUT POWER
Figure 2.
RF Input F-Type 75 ohm - AM-FM: -55 dBm Nominal: -20 dBm Maximum
Analog Audio Outputs — Left/Right Balanced XLR - +4 dBm into 600 ohm at 100% modulation
Digital Audio Output — AES-3 Professional, 1100 transformer-isolated on XLR connector; 0
dBFS <0.005% THD+N using HD Radio™ input
GPI — The PLM provides six dry, floating relays with outputs on a rear panel mounted DB15
connector to report selected alarm conditions, including loss of RF carrier, program audio,
OFDM lock and PAD data. See the PIN out chart for details under ‘ALARMS’
The M4.2Si Ethernet Port offers the use of DaySequerra’s Webserver by connecting the M4.2Si
to any networked computer with Internet access. The use of crossover cables can be used in
areas where a network connection is not possible. More information on the Webserver can be
found at the end of this manual. The Ethernet port with the aid of the webserver will keep the
M4.2Si up to date on all Firmware upgrades by checking, downloading and installing with the
click of the ‘Check Firmware’ button on the webserver. (A network internet connection must be
available to successfully upgrade the firmware.)
[DaySequerra
M4.2Si User Manual
e AC Power - Auto-sensing 85-264VAC, 47-63Hz input.
e The Power (Rocker) switch is located on the rear panel of the M4.2Si; when switched on the
unit model number will be displayed on the LCD.
LCD
mma 89.30 all no"
2. KUVO AUTO
3. IP: 192.168.252.252 i
Figure 3.
1. Tuner Frequency — Selects manual AM and FM tuning with UP and DN controls
2. Station Call Letters — Displays the station call letters with the Band
3. IP / PAD & RBDS Data — Toggles between a static IP address and decoded RBDS from
analog broadcasts and PAD data from an HD RadioTM broadcasts for display on the bottom of
the LCD. This field also displays active alarm details, which override IP/PAD/RBDS data.
4. SNR Indicator — Strength bars are displayed indicating the signal to noise ratio. (digital only)
5. BAND/PRESET — AM and FM Bands are selected; 25 AM and FM including Multicast stations
are available to be stored.
6. ST/Multicast — Displays the available multicast stations HD 1 thru HD 8. ST is displayed if HD
is not available
7. Forcing — Switch between Forced Auto, Digital, Analog, and Mono. By default the tuner is set
to AUTO. In Forced AUTO mode, the tuner will receive an HD RadioTM digital broadcast if one
is being transmitted; if not, the tuner will receive the analog broadcast.
10 [LaySequerra
M4.2Si User Manual
System Menu
Press and hold the CENTER button for 3 seconds to enter the SYSTEM menu. Use the arrow buttons
to navigate to the desired submenu. To EXIT this menu press the UP arrow to EXIT and press the
CENTER button to exit to the Homescreen.
SYSTEM MENU
Audio Muting
Forcing A-D Split
PEULE
Figure 4.
Audio Muting - The M4.2Si audio output can be set to automatically mute for received signals with
signal strength less than 45dBf.
Forcing A-D Split - The FORCING control is used to select A-D SPLIT mode, functional with AM or FM
HD RadioTM signals. In A-D SPLIT mode, the analog audio outputs and headphone jack provides left
analog program audio in left channel and the left HD RadioTM audio program in right channel. This
mode provides for audio phase matching as well as audio level and time-alignment of the HD RadioTM
broadcast for the correct analog diversity delay. Default mode is off.
Alarms
Program Loss Monitor — Enabling any alarm will disable tuning, presets and band selection from the
WebServer and M4.2Si box User interface.
Program Loss Monitor (PLM) Connections — The PLM provides five dry, floating relays with outputs
on a rear panel mounted DB15 connector to report selected alarm conditions, including loss of RF
carrier, program audio, OFDM and HD Lock, and Multicast. Opto-isolated inputs will be triggered by a
voltage of 5VDC. The GPIO Alarm output relays are Normally Open and will close when an alarm is
active. See figure xx for the DB15 pin-outs:
Alarm Loss of: No Contact Common
RF Carrier
Audio
OFDM Lock
HD Lock
Multicast
Reset 14 15
Pins not used — (11, 12, 13)
10
- N O A OO
Figure 6.
DaySequerra
M4.2Si User Manual
ALARMS
RF Carrier Loss
Audio Loss
0) 7D). EE au E
Figure 5.
RF Carrier Loss
Threshold: Navigate the arrow to Threshold and press ENTER to change the Threshold. A blinking
arrow will indicate the Threshold can be changed. Low, Medium and High are available to choose from.
Use the arrows to toggle through the choices. Press ENTER to make a selection and return to the RF
Carrier Loss menu. “LOW?” option sets RF carrier loss threshold for approximately 10uV (25dBf);
“MED” option sets RF carrier loss threshold for approximately 100uUV (45dBf); and “HIGH” option sets
RF carrier loss threshold for approximately 3KuV (75dBf).
Delay: Use the arrow buttons to select from 1 — 300 seconds of delay
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
Audio Loss (Silence Detect)
Threshold: Navigate the arrow to Threshold and press ENTER to change the Threshold. A blinking
arrow will indicate the Threshold can be changed. Low, Medium and High are available to choose from.
Use the arrows to toggle through the choices. Press ENTER to make a selection and return to the
Audio Loss menu. “LOW?” option sets audio loss threshold for approximately -60dB; “MED” option sets
audio loss threshold for approximately -40dB; and “HIGH” option sets audio loss threshold for
approximately -20dB.
Delay: Use the arrow buttons to select from 1 — 300 seconds of delay
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
OFDM Lock Loss
Delay: Use the arrow buttons to select from 1 — 300 seconds of delay
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
12 [LaySequerra
M4.2Si User Manual
HD Lock Loss
Delay: Use the arrow buttons to select from 1 — 300 seconds of delay (default — 15 sec)
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’ (default
— disabled)
Save: Saves all conditions and exits back to the Alarm menu.
Multicast Loss
Delay: Use the arrow buttons to select from 1 — 300 seconds of delay
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
ALARMS
RF Carrier Loss
Audio Loss
OFDM Lock Loss
Figure 7.
Alarm Buzzer
“ON” or “OFF” option using UP and DN switches to toggle the setting. Select “ON” for audible alarm to
beep during any active alarm condition and continue with alarm configuration menu; select “OFF” for
audible alarm to be silent during any active alarm condition. Press ENTER to save and exit to the
previous Alarm menu
Exit
Located at the top right corner of the Alarm menu is used to exit back to the previous SYSTEM menu.
From Alarms menu press the UP arrow button until the arrow is to the right of EXIT on the LCD then
press ENTER to exit.
DaySequerra
M4.2Si User Manual
FM De-Emphasis
Switch between 75usec and 50usec. M4.2Si is set to 75usec by default.
DE-EMPHASIS
50usS
75uS
Figure 8.
Region
M4.2Si supports 100 KHz or 200 KHz tune spacing for US and Euro. (Illustrated in figure 13.) The
factory default is set to US, 200 KHz. Press ENTER after making a selection to save and EXIT to the
previous menu
REGION
US
Euro
Figure 9.
Diagnostics
A Read-Only menu that displays the SNR (Signal to Noise Ratio) in dB, BER and BLER. The selection
mode arrow is defaulted to the top right corner of the menu. To Exit press ENTER. More
DIAGNOSTICS details can be viewed in the Settings tab of the WebServer.
DIAGNOSTICS
SNR: 4dB
BER: NA
BLER: NA
Figure 10.
4 | LaySequerra
M4.2Si User Manual
Network
A Read-Only menu that displays the current status of DHCP, the static IP address, Subnet and MAC
address. Navigate up to the top right corner of the menu and Press ENTER next to EXIT to return to
the SYSTEM menu. More NETWORK details can be viewed
NETWORK =i
DHCP: On
IP: 192.168.001.102
SUb : 255.255.255.000
Figure 11.
DHCP is set to ‘ON’ by default. Disabling DHCP allows the users to manually enter an IP address,
subnet and gateway IP. Exiting this menu will save and reset the M4.2Si. The new manual IP address
will be displayed on the LCD homescreen
About
A Read-Only menu displaying the HDRadio version, DSP version and Firmware version.
The selection mode arrow is defaulted to the top right corner of the menu. To Exit press ENTER. More
ABOUT details can be viewed in the Settings tab of the WebServer.
ABOUT
HDRadio :
DSP
Firmware :
Figure 12.
[daySequerra
M4.2Si User Manual
WebServer
Provides full access to the M4.2Si remotely via web browser.
A network connection or crossover cables is required for this feature. Crossover cables may be used
when a Network connection is not available. Power ON the M4.2Si and open a web browser. Type the
IP address of the M4.2Si in the URL to open the WebServer.
Four tabs are displayed at the top of the WebServer — Tuner, Alarms, Network, and System
Tuner — is the main page that controls Frequency Tuning, Presets, Multicast, Forcing Analog / Digital
and displays the Alarm Status of the M4.2Si. When Album art and PAD/SIS/RBDS data is available it
is also displayed under this tab.
Alarms — RF Carrier, Audio, OFDM Lock, HD Lock, and Multicast are available for enabling. Pull down
menus are available to map an alarm to a specific relay output on the DB-15.
Network — Configure network settings manually or DHCP enabled. Enable and configure private FTP
and Email notifications.
System — All other tuner actions and settings are available to be set within the SYSTEM tab.
M4.2Si - Home Tab
e Frequency — Displays the tuned frequency in a large bold font (Read-Only)
e Tuning and Band selection — Left and Right Arrows are used to navigate the spectrum
AM and FM tuning spectrum. Holding an arrow for longer than 2 seconds will increase
the speed by a factor of 2. AM/FM Band selector displays the band that the unit is
tuned to. Selecting the AM/FM Band button will toggle to the other.
e Station Logo — Displays the station logo (only if available by the station)
e SNR — Displays a graphical bar indicator with an integer value below it indicating the
actual signal to noise ratio measured in decibels.
e Alarm Status — Displays active alarm conditions in a bold red font.
e Mode Selector — Tuner mode will force Mono, Analog, Digital, Auto (auto detects and
automatically forces what is available). Split mode will place Analog in the left channel
and Digital in the right.
¢ Album Art — Displays Album Art when available by the station
e Multicast — Displays any available Multicast stations (HD-2 thru HD-8) that are
available and highlights them in a bold font. Orange font indicates which tuned to.
e AM/FM Presets — Displays 15 AM and FM presets depending on which band the unit is
tuned to. Selecting and holding an empty preset tab for 3 seconds will save the tuned
to frequency to it. Performing this action on a tab that has a preset already saved to it
will overwrite and save the new station to it.
16 [daySequerra
M4.2Si User Manual
e RBDS/PSD Data — RBDS/PSD data will scroll when available. PSD scrolls the Station
Long and Short Name, Program Type, Song, Artist, Album, Genre, Comments field.
RBDS scrolls the PI (Call Letters), PS ( Program Service), PTY (Program Type) and RT
(Radio Text). Any active alarm condition will override this data.
M4.2Si - Home Tab
Signal/Noise
Ratio Alarm Status
Frequency Tuning and Band Station Logo Mode
selection “when available Selector
Refreshed P9
| ALARM STA
HD) ull, fe
je
Tuner Mode Split
WIP -FMI Forced Digital + @e
FM Presets
Title: nthony Gargano & Rob Ellis Sports Radio
Figure 13.
Album Art Multicast AM/FM RBDS/PSD
*when available Presets Data
[daySequerra
M4.2Si User Manual
Alarms Tab
Refreshed PSD.
VI4.251 Alarms Network system
ee WEA
ALARM STATUS
9 | a 1 O
Tuner Mode Split
a4 4
RF Carrier Loss Audio Loss OFDM Lock Loss Relay Outputs
De ay: & olay: De Wee 1S > OUIRE RF Carrier Loss $
EAA low + avel: : Enable: > OUT 2:
Enable: rable: OUIRCH OFDM Lock Loss $
OVIR SE HD Lock Loss ‘
HD Lock Loss OUT 5:
De uy: 1 5
Enable:
Figure 14.
Alarm Settings Alarm relay outputs via GPIO
e Alarm configuration — Enable/Disable RF Carrier Loss, OFDM Lock Loss, Audio Loss,
and Multicast Loss. Alarm conditions are set with pull down windows. Sliding the
switch to the left side will ‘ENABLE’ the alarm with the set conditions. Orange switch
indicates the alarm is enabled.
e Relay Outputs — are available for each alarm to be set to a specific relay output. A pin-
out of the GPIO DB-15 is available on page 11 of this user manual.
18 LaySequerra
M4.2Si User Manual
Network Tab
Figure 15.
Refreshed PSD.
Network
ALARM STATUS
94 7 0 of No Alarm
5
Tuner Mode Split
Network Settings rivate FTI Email Notifications
DHCP: able: HE |
IP Address: 10.10.62
<woile 255.2
Network Settings Private FTP Settings Email Settings
Network Settings - Configures network connections. DHCP is enabled by default.
Slide the switch to the right box to disable DHCP. IP Address, IP Subnet, Gateway are
set here. MAC is read only. After the Network settings are saved the M4.2Si will reset
itself so the new network settings are enabled.
Private FTP Settings — An optional private FTP may be setup for firmware updates. By
default this feature is disabled. Slide the switch to the left indicated in orange to Enable
private FTP.
Email Notifications Settings - configures the M4.2Si for email alerts when Alarm
conditions become active. This feature is set to disable by default. Slide the switch to
the left indicated in orange to enable. Entering the SMTP IP, Port, User Name,
Password, Sender, and Receiver is required. Click ‘Save’ when finished. “Password is
case sensitive alphanumeric. No spaces or symbols may be used. Pressing ‘Test’ will
[DaySequerra
M4.2Si User Manual
send a test email to be sure it is configured properly. SSL encrypted logins are
currently unavailable — coming soon in a future firmware release.
System Tab
Vi4.251 Alarms
oe
94.10
BET Beo 5
Time
Network
a ey
-weegiem GMT-S >
DEWO al@ey=\Uiale ce
Other Settings
Audio Mutt
De-Emphapsis:
e Network Time
e Firmware Updates
e Reset unit / power cycle
e User Manual Download
20 [daySequerra
M4.2Si User Manual
system
Figure 16.
Refreshed Other Settings.
alll ALARM STATUS
SNR: 62dB
Hi)
WIP -FM
Tuner Mode Split
Forced Digital + r Cy
Actions ———————— rAbo out
310) d| DHE C IAS]
Check for update: Go |
m An T E P. 2 F;
Local update: | Go | Serial: 41234
Firmware: 1.1.6
Build Number: 2
Build Date: 2014-12-12
ees Firmware: | Go |
ese Smee Co
Download Manual: Go |
Lock Screen: do
e Misc. settings
e Unit / Firmware identification and
build number / date.
e Firmware Updates
o ‘Check for update’ checks DaySequerra’s FTP site against the firmware version on the
M42Si for an available firmware update. If an update is available an option to download
and install will pop-up. If the Firmware is up to date a message will pop-up displaying
this — click ok to continue using the current firmware. “*It is good practice to periodically
check for updates by selecting ‘Check for Update’.
o Local update allows the user to perform a firmware and webserver update from a local
network drive. See figure xx.
o ‘Downgrade Firmware’ enables the user to downgrade back to the last stable release
stored on DaySequerra’s FTP site. A pop-up message asks to continue or cancel.
e ‘Reset Unit’ performs a soft reboot of the M4.2Si unit.
e The current user manual is always available for download by selecting ‘Download Manual’.
This document is also available on our website www.daysequerra.com.
e Audio Muting - The M4.2Si audio output can be set to automatically mute for received signals
with signal strength less than 45dBf.
e De-Emphasis - Switch between 75usec and 50usec. M4.2Si is set to 75usec by default.
e Region - US / Euro. Adjusts tune spacing between 100 KHz (Euro) and 200 KHz (US — default)
e About — Read-Only
o Box ID — M4.2Si
o Serial # - Displays the unit serial number
o Firmware Version — Displays the installed firmware version. As updates are
available and installed this number will update with it.
A reset button performs a soft reboot of the M4.2Si. The most recent version of the M4.2Si user
manual is available at all times by clicking ‘Download’.
4. Network Settings window — Configures network connections. DHCP is enabled by default.
Uncheck this box to disable DHCP. IP Address, IP Subnet, Gateway are set here. MAC is read only.
Checking the ‘Display IP Address Periodically in the unit’ will rotate the IP address in with
PAD/SIS/RBDS scrolling data. After the Network settings are saved the M4.2Si will reset itself so the
new network settings are enabled. Selecting the Rest Unit button will remotely reset the unit.
5. About window — Read only window displaying important M4.2Si information: Serial #, Firmware
Version, and Box ID #
6. Private FTP — The use of a private FTP site for future firmware upgrades is allowed. The can be
accomplished by saving the FTP settings and checking the ‘Enable Private FTP’ box. Enabling this
feature will keep the M4.2Si from downloading the update directly from DaySequerra. Please notify
DaySequerra so future firmware updates are sent directly to the user.
[LaySequerra
M4.2Si User Manual
Restore Factory Settings
To restore your M4.2Si unit back to the original factory settings hold the UP arrow button in while power
cycling the unit. Release the UP arrow button once the power is restored to the unit. The original
factory default settings will then be restored.
[daySequerra
22 |
M4.2Si User Manual
DaySequerra — Three Year Limited Warranty
DaySequerra warrants this product to be free from defects in materials and workmanship to its original
owner for three (3) years from the date of purchase. DaySequerra will repair or replace such product or
part thereof that upon inspection by DaySequerra, is found to be defective in materials or workmanship.
A Return Authorization Number must be obtained from DaySequerra in advance of return. Call
DaySequerra at (856) 719-9900 to receive the number to display on the outside of your shipping carton.
A written statement with the name, address, and daytime telephone number of the original owner,
together with receipt from the original purchase, and a brief description of any claimed defects, must
accompany all returns. Parts or product for which replacement is made shall become the property of
DaySequerra. The customer shall be responsible for all costs of transportation and insurance to and
from the DaySequerra factory, and all such costs will be prepaid.
DaySequerra shall use reasonable efforts to repair or replace any product covered by this limited
warranty within thirty days of receipt. In the event repair or replacement shall require more than thirty
days, DaySequerra shall notify the customer accordingly. DaySequerra reserves the right to replace
any product that has been discontinued from its product line with a new product of comparable value
and function.
This warranty shall be void in the event a covered product has been damaged, or failure is caused by
or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow
instructions, improper installation or maintenance, alteration, or lightning, power fluctuations and other
incidental or environmental conditions. Further, product malfunction or deterioration due to normal
wear is not covered by this warranty.
DAY SEQUERRA DISCLAIMS ANY WARRANTIES, EXPRESSED OR IMPLIED, WHETHER OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET FORTH
HEREIN. THE SOLE OBLIGATION OF DAY SEQUERRA UNDER THIS LIMITED WARRANTY SHALL BE TO
REPAIR OR REPLACE THE COVERED PRODUCT, IN ACCORDANCE WITH THE TERMS SET FORTH
HEREIN. DAY SEQUERRA EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, INDIRECT
OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM BREACH OF ANY WARRANTY, OR
ARISING OUT OF THE USE OR INABILITY TO USE ANY DAY SEQUERRA PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation
on how long an implied warranty lasts, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to
state. DaySequerra reserves the right to modify or discontinue, without prior notice to you, any model
or style product. If warranty problems arise, or if you need assistance in using your product contact:
DaySequerra
154 Cooper Road, Building 902
West Berlin, NJ 08091
856-719-9900 (phone)
856-719-9903 (fax)
For more information, please visit www.daysequerra.com or email us at [email protected].
[ MaySequerra | 154 Cooper Road, Building 902 | West Berlin, NJ 08091 | V 856-719-9900 | F 856-719-9903 | www.DaySequerra.com
M