iPower FM manual 6.5.12

Survival, Water, Medical Field Manuals

Military Manuals

Document text

iPower 


FM 


For iPhone 4/4S 


USER MANUAL 


Welcome 


Thank you for purchasing the 
iPower® FM for iPhone 4/4S. Please 
read the user manual carefully 
before use. 


iPower® FM. 
Drive, listen, charge... wirelessly. 


Visit www.ipowerup.net for more FAQ and 
support 


Package Contents Included 
- iPower® FM for iPhone 4/4S 

-Micro USB Cable 

-User Manual 


FM Transmitter Instructions 


To use the FM transmitter, press the CH key. The 
FM indicator light will go on, press CH key again to 
choose one of the four transmitter frequency 
points 88.1, 88.5, 88.9, 89.3MHz. Then tune the car 
FM settings to the corresponding receiving 
frequency channel. If there is no music signal 

within one minute, the FM transmitter function will 
turn off to save power. At times, there may be static 
interference due to FM frequency saturation. 


Battery Consumption 


When iPhone and iPower FM are connected to 
any power source, the power source charges 
the iPhone first. When the phone is charged up 
to 80%, the power source then charges the 
iPower case. If the power source is cut off 
iPower FM becomes the main power supply (if 
the unit is in charge mode) until it is less than 
5%, then the power is supplied by your iPhone. 


Sync 


When iPhone is inserted in iPower FM, you are able 
to synchronize your iPhone with iTunes or other 
applications without removing the iPhone from the 
iPower FM case. It is recommended to use the 
original included micro USB cable, as other cables 
may not work properly. 


CMYK 


iPower® FM 


(1) LED Indicators & On/Off 
(2) Micro USB input port 
(3) Camera opening 

(4) On/Off button 

(5) Channel button 

(6) Soeaker Holes 


LED lights Indication 

Press the button to indicate case’s power status. 
LED 1-5 Lit= 100% 

LED 1-4 Lit= 80% 

LED 1-3 Lit= 60%. 

LED 1-2 Lit= 40% 

LED 1 Lit= 20% 

LED 1 flashing= Less than 20% 


On & Off Button 


To turn on the iPower FM, press the button and the 
iPhone will make an audible sound that you’re 
charging. To turn off the iPower, hold down the 
On/Off button 3 seconds and release. To ensure 
you’re not still charging check your iPhone battery, it 
should not show a charging icon. 

Performing this feature will allow your iPower FM to 
provide full backup power when needed. 

For best results, charge your iPhone in the iPower 
FM case nightly, and only activate your iPower FM 
when your iPhone’s battery power is at the halfway 
point or lower. 

Camera Flash: When using flash on the camera, for 
best results, remove the iPhone from the iPower FM. 


FAQ 


What are the best charging methods? 

Connect using USB cable that came with iPower FM. Can 
be plugged in to your computer or any wall plug power 
source. 

How many charge cycles do | get with iPower FM? 
Rechargeable for over 500 cycles avg. 

What do I do when there is static? Static interference 
may occur from FM frequency saturation, try changing 
the FM station. 

Willl | double battery life? We cannot guarantee you will 
double the battery life. The amount of additional power 
depends on a variety of factors different for every user. 


Specifications 

Product name: iPower® FM 

Cell type: Li-polymer battery 

Input: DC 5.0V 500mAh 

Output: DC 5.0V 1000mAh 

Capacity: 1600mAh 

Dimension: 2.4in x 4.8in x 0.58in 

Weight: 2.70z 

Compatibility: iPhone 4/4S 

Standby time: Up to 200 hrs 

Talk time: Up to 4.5 hrs 4G, up to 5.5 hrs 3G 
Internet use: up to 3.8 hrs 3G, up to 6.5 hrs Wi-Fi 
Audio Play: up to 26 hrs 

Video Play: up to 5.5 hrs 

Hotspot usage: up to 3 hrs (2 devices) 


Charging Instructions: 


1. Use the included micro-USB cable to charge the 
IPower® FM for the first time from USB port or wall 
charger. 

2. When you charge the iPower device with the 
iPhone inserted and it will charge both devices. In this 
Operation, the power source will charge your iPhone 
first until full, then will charge the iPower. You can 
always charge the iPower FM independently also. LED 
light indicators light up progressively when iPower FM 
is charging. When all five lights are illuminated (no 
flickering) both devices are fully charged. 

3. Press and hold the ON/OFF button to activate the 
charge from the iPower case. When case is charging 
the iPhone, the LED’s will light up progressively. After 
pre-charging your iPower FM and phone, use the 
ON/OFF button to utilize the charge for efficient 
long-term usage when mobile. 


Warning 
Read all instructions and warnings prior to 
using this product. Failure to do so could result 
in fire, explosion, electrical shock, or other 
hazard causing serious and/or fatal injury, and 
or product damage. 
1. Do not modify, disassemble, open, drop, crush, 
puncture, force, or shred the product. 
2. Do not expose product to rain or water. 
3. Keep away from open flame 
4. Keep away from high voltage devices. 
5. This product is not a toy, keep away from children. 
Ensure that all persons who use this product read all 
instructions and warnings. 
6. Only use the adapter with outlet voltage of 
4.75V-5.25V or computer USB port to charge the 
product. 
7. Do not force the plug in charging ports. Doing so 
may cause permanent damage to the ports, device, or 
cable. 
8. Do not wash with harsh soaps, detergents, or 
chemicals. 
9. Over an extended period of non usage, the iPower 
will begin to discharge less than 5% overtime. Charge 
at least once every three months when not in use. 
10. Misuse of this product may result in damages that 
are not covered in the one year limited warranty. 
11. Please see the One Year Limited Warranty on the 
back of this manual for further information. 
12. All parts of this product including its accessories are 
limited to the use of the product. 
13. The developer and manufacturer of this product 
have the right of interpretation, determination, and 
revision of any and all of the above.