Document text
R) RadioShack.
www.radioshack.com™
OWNER’S MANUAL —
Please read before using this equipment.
2-Channel FM Wireless
Intercom
43-3106
WARNING: To reduce the
risk of fire or shock hazard, do
not expose this product to rain
TX (Transmit
Indicator)
RISK OF ELECTRIC
SHOCK. DO NOT
or moisture.
OPEN.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-
SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
LDD]
CHANNEL e L OFF/
—
VOLUME
TALK
LOCK CALL
Your RadioShack 2-Channel FM Wireless Intercom is
convenient and easy to use. Installation is quick and simple.
This symbol is intended
to alert you to the
presence of uninsulated
dangerous voltage
within the product's
enclosure that might be
of sufficient magnitude
to constitute a risk of
electric shock. Do not
open the product's case.
AN
This symbol is intended
to inform you that
important operating and
maintenance
instructions are included
in the literature
accompanying this
product.
A\
Simply plug each of the two supplied stations into a
standard three-wire AC outlet, and you are ready to send
and receive calls or monitor an area where a station is
installed. Each of your intercom’s stations has the following
features:
Adjustable Volume Control — allows you to alter the
volume to suit the noise level in the room.
Lockable Talk Bar — allows you to talk to or monitor a
room hands-free.
Call Tone — alerts other stations before you start talking.
Desk or Wall Mounting Capabilities — provide easy,
convenient placement of stations.
Your intercom is ETL listed and meets all applicable FCC
standards.
l IMPO
If an icon appears at the end of a paragraph, go to the box on that page
with the corresponding icon for pertinent information.
Į
e
sy
A= Warning
Xá — Caution
X% — Hint
RTANT !
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com
are trademarks used by
RadioShack Corporation.
Important X —Note
| IMPORTANT !
Stations can transmit up to 300
feet and between buildings as long
as they are connected to the same
power line transformer.
X NOTE X
Make sure you install the stations
at least 10 feet away from each
other. Placing the stations too
close together produces feedback
and creates a squealing sound.
INSTALLATION
You can install the stations almost anywhere there is a
standard AC outlet. Simply plug each station into an outlet
and place it directly on a desk, shelf, table or on a wall. To
MOUNTING
To mount a station on the wall, you need two screws (not
supplied) with heads that fit into the keyhole slots on the
bottom of the stations.
1. Select a location for the station. Mark the mounting
screw locations on the wall 2 inches (50.8 mm) apart,
one above the other.
2. Drill holes at the marked locations.
3. Thread a screw into each hole allowing the screw
heads to extend about 3⁄6 inch (4.3 mm) from the wall.
4. Align the keyhole slots on the bottom of the station with
the screw heads in the wall. Slide the station down onto
the screws to secure it.
OPERATION
SETTING THE CHANNEL
Each station has two channels, so you can select which
station you want to communicate with. You can also use a
station to monitor sounds near another station.
For example, you could set a station installed in the kitchen
to Channel A and a station installed in the family room to
Channel B. Using the station installed in the kitchen, you
can communicate with the station in the family room by
setting the channel selector to B.
Set the channel selector on each station as follows:
e If you want all the stations to communicate with each
other at the same time, set all stations to the same
channel.
e If you want to use a station to communicate with only
one of the other stations, set only those stations to the
same channel.
TURNING A STATION ON AND OFF/
ADJUSTING THE VOLUME
Rotate VOLUME counterclockwise until it clicks. Then adjust
VOLUME to a comfortable listening level. To turn off the
station, rotate VOLUME clockwise until it clicks.
CALLING ANOTHER STATION
1. Set the channel selector to the channel (A or B) for the
station you are calling.
2. Press CALL. The station that is on and set to the
selected channel sounds a tone.
3. Hold down TALK and speak in a normal voice. When
you finish speaking, release TALK and listen for the
response. {X
MONITORING
You can set any station so it continuously transmits sounds
from the area where it is located to another station. For
example, you could set the station in a baby’s bedroom,
then use the station in the kitchen to monitor the sounds. {X
1. Press LOCK on the station in the area you want to
monitor. The TX indicator lights. WX
2. Set the channel selectors on both stations to the same
channel.
3. When you finish monitoring, release the lock by
pressing TALK or CALL on the station in the area you
are monitoring. The TX indicator turns off. (X
UsING ADDITIONAL STATIONS
You can add additional stations to your intercom system as
long as they transmit on the same frequency. The stations
and their box are labeled to indicate each station’s
frequency — A (200 kHz), B (270 kHz). Stations in the same
box have the same frequency.
Be sure the letter on the stations you plan to add matches
the letter on your current stations. If you want to set up a
separate intercom system, however, be sure it operates on
a different frequency.
X NOTE X
Only one party can talk on a
channel at a time.
The TX indicator on the station
you are using remains lit as long
as you hold down TALK or
CALL, or when you press
LOCK.
Set the channel selector back to
your designated channel after
you finish talking, so others can
easily reach you.
You can monitor only one
station at a time.
The TX indicator stays lit until
you press CALL or TALK. This
lets you know that the station is
transmitting.
After pressing LOCK on a
station, you cannot call or talk to
that station until you press
TALK or CALL to release the
lock.
Care
Keep the intercom dry; if it gets wet,
wipe it dry immediately. Use and
store the intercom only in normal
temperature environments. Handle
the intercom carefully; do not drop it.
Keep the intercom away from dust
and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
Service and Repair
If your intercom is not performing as
it should, take it to your local
RadioShack store for assistance. To
locate your nearest RadioShack, use
the store locator feature on
RadioShack's website
(www.radioshack.com), or call 1-800-
The Shack (843-7422) and follow the
menu options. Modifying or
tampering with the intercom's internal
components can cause a malfunction
and might invalidate its warranty and
void your FCC authorization to
operate it.
Limited Ninety-Day Warranty
This product is warranted by RadioShack
against manufacturing defects in material and
workmanship under normal use for ninety (90)
days from the date of purchase from Ra-
dioShack company-owned stores and autho-
rized RadioShack franchisees and dealers.
EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND
ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE DURATION
OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO CUS-
TOMER OR ANY OTHER PERSON OR EN-
TITY WITH RESPECT TO ANY LIABILITY,
LOSS OR DAMAGE CAUSED DIRECTLY OR
INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY, INCLUD-
ING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR
PROFIT OR ANY INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES,
EVEN IF RadioShack HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how
long an implied warranty lasts or the exclusion
or limitation of incidental or consequential dam-
ages, so the above limitations or exclusions
may not apply to you.
In the event of a product defect during the war-
ranty period, take the product and the Ra-
dioShack sales receipt as proof of purchase
date to any RadioShack store. RadioShack will,
at its option, unless otherwise provided by law:
(a) correct the defect by product repair without
charge for parts and labor; (b) replace the prod-
uct with one of the same or similar design; or (c)
refund the purchase price. All replaced parts
and products, and products on which a refund is
made, become the property of RadioShack.
New or reconditioned parts and products may
be used in the performance of warranty service.
Repaired or replaced parts and products are
warranted for the remainder of the original war-
ranty period. You will be charged for repair or
replacement of the product made after the expi-
ration of the warranty period.
This warranty does not cover: (a) damage or
failure caused by or attributable to acts of God,
abuse, accident, misuse, improper or abnormal
usage, failure to follow instructions, improper in-
stallation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b)
any repairs other than those provided by a Ra-
dioShack Authorized Service Facility; (c) con-
sumables such as fuses or batteries; (d)
cosmetic damage; (e) transportation, shipping
or insurance costs; or (f) costs of product re-
moval, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights,
and you may also have other rights which vary
from state to state.
RadioShack Customer Relations, 200 Taylor
Street, 6th Floor, Fort Worth, TX 76102
12/99
THE FCC WANTS YOU
TO KNOW
Your intercom system might cause TV or radio interference
even when it is operating properly. To determine whether
your stations are causing the interference, turn them off. If the
interference goes away, your stations are causing it. Try to
eliminate the interference by:
e Moving both stations away from the receiver
* Connecting the stations to outlets that are on a different
electrical circuit from the receiver
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
e Reorient or relocate the receiving antenna.
« Increase the separation between the equipment and
receiver.
* Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
* Consult your local RadioShack store or an experienced
radio/TV technician for help.
e If you cannot eliminate the interference, the FCC
requires that you stop using your intercom system.
Changes or modifications not expressly approved by
RadioShack may cause interference and void the user’s
authority to operate the equipment.
You must use shielded interface cables with this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
10A02
43-3106
AOQ0132AAA1
Printed in China