Document text
©з ON Y. 4-247-631-12(1)
®
FM Stereo
FM-AM Receiver
Operating Instructions
Owner’s Record
The model and serial numbers are located at the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. Serial No.
STR-DE695
© 2003 Sony Corporation
205
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains,
etc. And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
For customers in the United States
A
ELECTRI
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
You are cautioned that any changes or modification
not expressly approved in this manual could void
your authority to operate this equipment.
Note to CATV system installer:
This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
For customers in Canada
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
ENERGY STAR? is a U.S. registered
ЖА mark.
29р As ап ENERGY STAR? partner, Sony
~~~ Corporation has determined that this
product meets the ENERGY STAR?
guidelines for energy efficiency.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic" and the double-D symbol
are trademarks of Dolby Laboratories.
** “DTS”, “DTS-ES Extended Surround" and
“Neo: 6" are trademarks of Digital Theater
Systems, Inc.
Table of Contents
List of Button Locations and
Reference Pages
Матинй 5
Hooking Up the Components
Required cords ...................... sess 6
Antenna hookups .................. eee 7
Audio component hookups .................... 8
Video component hookups .................... 9
Digital component hookups ................. 10
Multi channel input hookups ............... 12
Other HOOKUPS 2.22.2222... 13
Hooking Up and Setting Up
the Speaker System
Speaker system hookups ..................... 15
Performing initial setup operations ..... 17
Multi channel surround setup .............. 17
Checking the connections .................... 22
Basic Operations
Selecting the component ..................... 23
Changing the display
Enjoying Surround Sound
Using only the front speakers
(2 Channel Stereo) ........................ 25
Enjoying higher fidelity sound ............ 25
Selecting a sound field ........................ 26
Selecting the surround back decoding
mode (SURR BACK
DECODING) ............ eee 28
Understanding the multi channel
surround displays ..........................
Customizing sound fields
Receiving Broadcasts
Direct tuning ................ eee 34
Automatic tuning ... 239
Preset tuning 2... 35
Other Operations
Naming preset stations and program
бӨШСЕ5 aee a den aaa ен 37
Recording кили д a ege 37
Using the Sleep Timer ......................... 38
Adjustments using the CUSTOM
MEND us ed eerie 39
Changing the command mode of the
TECEIVED a Aan sein sige 39
CONTROL А Ш control system ......... 40
Operations Using the Remote
RM-PP412
Before you use your remote
Remote button description ...................
Selecting the command mode of the
Mun P ——À 46
Additional Information
PréCautions: ene eee 50
Troubleshooting ..................... eene 50
Specifications .................. see 53
Tables of settings using the MAIN
MENU button .................. eee 56
Adjustable parameters for each sound
field zio RH 57
3^5
455
About This Manual
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
4-XXX-XXX-XX AA
=
Area code
Any differences in operation, according to the
area code, are clearly indicated in the text, for
example, “Models of area code AA only”.
Tip
The instructions in this manual describe the controls
on the receiver. You can also use the controls on the
supplied remote if they have the same or similar
names as those on the receiver. For details on the use
of your remote, see pages 42—49.
Note for the supplied remote
RM-PP412
The TV/SAT, PHONO, SOURCE, DIRECT,
AAC BI-LING, 12 and ON SCREEN buttons
on the remote are not available.
List of Button Locations and Reference Pages
How to use this page
Use this page to find the location of buttons that are
mentioned in the text.
DISPLAY |3
Illustration number
(24, 52)
t t
Name of button/part Reference page
unit
ALPHABETICAL ORDER
A-H
A.F.D. (button/indicator) 26 (25—
27)
AUX [4] (2
3)
CD/SACD
11 (23)
DIMMER
4] (24)
DISPLAY
3] (24, 52)
Display [13
DVD [9] (23)
ENTER [19
FM MODE
1-0
(24)
(17, 37, 39)
32 (34)
INPUT MODE [17] (23)
IR (receptor) [5] (42, 52)
Jog dial |20
56)
(18, 32, 33, 37, 39,
MAIN MENU [18] (18, 32, 33, 37,
39, 56)
MASTER VOLUME [16] (22, 24,
50)
MD/TAPE 10
MEMORY |31
(23)
(35)
MOVIE (button/indicator) [25] (26,
51)
MULTI CHANNEL DECODING
(indicator) [22
MULTI CH IN
(23)
23 (23)
MUSIC (button/indicator) |24 (26,
27, 51)
PHONES (jack)
PRESET TUNING +/- [29
(35, 36, 54)
SPEAKERS (OFF/A/B/A+B)
(15, 24, 50)
SURR BACK DECODING [28
(28, 39)
34 (24, 30, 51)
го
SURR BACK DECODING
(indicator) [15]
TUNER FM/AM
37)
TUNING 4/-
30
(28)
12 (23, 35, 36,
(35)
V-Z
VIDEO 116
VIDEO 2 |7
VIDEO 318
(23)
(23)
(23)
VIDEO 3 INPUT (jacks) (33 (9)
NUMBERS AND SYMBOLS
2CH (button/indicator)
27, 33)
VO (power) |1
54)
</> |21
27] (25,
(17,22, 33, 39
(18, 32, 33, 37, 39, 56)
ѕәбеа әэиәләјән pue suone»2o uong jo 15H Д
505
Hooking Up the Components
Required cords
The following optional connection cords EY — ілге required when you hook up the components
(pages 8 — 14).
Audio cord (not supplied) Monaural audio cord (not supplied)
White (L) = Пр (fH Б Black AF (H1
Red (8) =" —S =>
ЕН Audio/video cord (not supplied) Tip | |
Yellow (video) «Е > Audio cord | can be torn into two monaural audio
White (L/audio) Ap cords [@.
| Р
Red (R/audio) gpp “=з E] Component video cord (not supplied)
Green “ГЕР
Video cord (not supplied) Blue = 85
Yellow = СЕ єч 1 Red = к
[9] S-video cord (not supplied) 1 Monaural mini-plug cord (not supplied)
© m ss Black cipum
[3 Optical digital cord (not supplied)
«ПШ = ІШІ
Coaxial digital cord (not supplied)
d ІН b
Before you get started
* Turn off the power to all components before making any connections.
* Do not connect the AC power cord until all of the connections are completed.
* Besure to make connections firmly to avoid hum and noise.
* When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on
the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
* When you connect optical digital cords, insert the cord plugs straight in until they click into place.
* Do not bend or tie the optical digital cord.
Antenna hookups
AM loop antenna
(supplied)
FM wire antenna
(supplied)
DIGITAL
OPTICAL
VIDEO 2
IN
ANTENNA
s}usuodui0 əy} ап BuryooH H
DVD
IN
VIDEO OUT
VIDEO IN VIDEOOUT VIDEO IN VIDEO 2 MONTOR
IN ол
C
( |
"t C]
C
FRONT | SURROUND) WOOFER
MULTI CH IN
* The shape of the connector varies depending on the area code.
Notes on antenna hookups
* To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
* After connecting the FM wire antenna, keep it
as horizontal as possible.
755
Audio component hookups
MD or Tape deck
DIGITAL
OPTICAL
VIDEO 2 [7]
IN
COMPONENT VIDEO
MD/
TAPE
IN
MD/
VIDEO IN || VIDEO IN | | VIDEOOUT VIDEOIN || VIDEO OUT
SVIDEO — S VIDEO
OUT IN
AUDIO IN || AUDIO IN | AUDIO OUT — AUDIO IN}
[сүр [шо] VIDEO 1 |
CD or Super Audio
CD player
855
Video component hookups
DVD player
OUTPUT
AUDIO OUT VIDEO
R L OUT
COMPONENT VIDEO
By то 5
N Ol
Geo
AUDIO IN || AUDIO IN боо,
DVD [VIDEO 4
To the VIDEO
3 INPUT jacks
VIE =O 1
B
Camcorder QJ. Satellite
or video J tuner or
game VCR
SURROUND
SPEAKERS weepance use 9:60.
El
INPUT
Е
TV monitor
Note on video component
hookups
You can connect your TV’s audio output jacks
to the VIDEO 2 AUDIO IN jacks on the
receiver and apply sound effects to the audio
from the TV. In this case, do not connect the
TV’s video output jack to the VIDEO 2
VIDEO IN jack on the receiver. If you are
connecting a separate satellite tuner, connect
both the audio and video output jacks to the
receiver as shown above.
If you have a DVD player, TV or satellite tuner
with COMPONENT VIDEO (Y, B-Y, R-Y)
output jacks and a monitor with COMPONENT
VIDEO input jacks, use a component video
cord (not supplied) to connect to the receiver.
Tip
When using the S-video jacks instead of the video
jacks, your monitor must also be connected via an
S-video jack. S-video signals are on a separate bus
from the video signals and will not be output through
the video jacks.
Note
On this receiver, the component video signals are not
compatible with S-video signals or video signals.
ѕұџәиоашод əy} dn бшуоон H
9/5
Digital component hookups
Connect the digital output jacks of your DVD player and satellite tuner (etc.) to the receiver’s digital
input jacks to bring the multi channel surround sound of a movie theater into your home. To fully
enjoy multi channel surround sound, five speakers (two front speakers, two surround speakers, and a
center speaker) and a sub woofer are required. You will also need a surround back speaker for 6.1
channel surround sound.
Satellite tuner or
DVD player*
DIGITAL
DIGITA _
OPTICAL
VIDEO 2
IN
COMPONENT VIDEO
MD/
TAPE
IN
MD/
SVIDEO
S-VIDEO
S-VIDEO
FRONT SURROUND) WOOFER
MULTI CH IN
DVD player
(еїс.)*
* Make either coaxial or optical connections. We recommend making coaxial connections instead of optical
connections.
1045
Connect the digital output jacks of your MD or tape deck to the receiver’s digital input jack апа
connect the digital input jacks of your MD or tape deck to the receiver’s digital output jack. These
connections allow you to make digital recordings of TV broadcasts, etc.
DIGITAL
MD or tape deck
OPTICAL
ІМ0Е02|/-1
IN
Notes
* You cannot make digital recordings when the source is a multi channel digital source.
* All the OPTICAL and COAXIAL jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling
frequencies.
* It is not possible to record analog signals to the components connected to MD/TAPE and VIDEO jacks with
only digital connections. To record analog signals, make analog connections. To record digital signals, make
digital connections.
* The sound is not output when you play a Super Audio CD disc on the Super Audio CD player connected to the
CD/SACD OPTICAL IN jack on this unit. Connect to the analog input jacks (CD/SACD IN jacks). Refer to the
SVIDEO
IN
SVIDEO S-VIDEO
ол ІК
[у OUT AUDIO IN
operating instructions supplied with the Super Audio CD player.
ѕұџәиоашод əy} dn бшуоон Й
11%
12/5
Multi channel input hookups
Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel
input jacks. These connections allow you to enjoy multi channel software encoded in formats other
than Dolby Digital and DTS. If your DVD player is equipped with multi channel output jacks, you
can connect them directly to the receiver to enjoy the sound of the DVD player’s multi channel
decoder. Alternatively, the multi channel input jacks can be used to connect an external multi channel
decoder.
To fully enjoy multi channel surround sound (5.1 channel), five speakers (two front speakers, two
surround speakers, and a center speaker) and a sub woofer are required. You will also need a
surround back speaker for 6.1 channel surround sound. Refer to the operating instructions supplied
with your DVD player, multi channel decoder, etc., for details on the multi channel hookups.
Notes
* When using the connections described below, adjust the level of the surround speakers and sub woofer from the
DVD player or multi channel decoder.
* See page 15 for details on speaker system hookup.
DIGITAL.
OPTICAL
voo] ANTENNA
MD/
TAPE
IN
MD/
TAPE
S-VIDEO || S-VIDEO
N IN
SVIDEO — SI
OUT |
IDEO
IN
©
HOY.
AUDIO IN || AUDIO IN | JAUDIO OUT _ AUDIO IN}
E
Ге]
MULTICH OUT
DVD player, CD/Super
Audio CD player,
Multichannel decoder, etc.
Other hookups
DIGITAL
OPTICAL
VIDEO 2
IN
MD/
TAPE
IN
ANTENNA
MD/
TAPE
CONTROL A1II
Er
CDI
SACD
IN
VIDEO IN
SVIDEO
IN
AUDIO IN.
VIDEO IN
AUDIO IN.
МЕО ОИТ VIDEO IN
R
UDIO OUT AUDIO IN}
CD player, tape
deck, MD deck, etc.
CONTROL А1П hookup
* If you have a Sony CD changer with a
COMMAND MODE selector
* If you have a CONTROL A1II compatible If your CD changer's COMMAND MODE
Sony CD player, Super Audio CD player,
tape deck or MD deck
Use a monaural mini-plug cord (not
supplied) to connect the CONTROL АШ
jack on the CD player, Super Audio CD
player, tape deck or MD deck to the CTRL
АШ jack on the receiver. Refer to
“CONTROL АШ control system" on page
40 and the operating instructions supplied
with your CD player, Super Audio CD
player, tape deck or MD deck for details.
Note
If you make CONTROL А1П connections from
the receiver to an MD deck that is also connected
to a computer, do not operate the receiver while
using the “Sony MD Editor" software. This may
cause a malfunction.
selector can be set to CD 1, CD 2, or CD 3,
be sure to set the command mode to “СР 1”
and connect the changer to the CD jacks on
the receiver.
However, if you have a Sony CD changer
with VIDEO OUT jacks, set the command
mode to *CD 2" and connect the changer to
the VIDEO 2 jacks on the receiver.
continued
s}usuodui0 əy} ап BuryooH H
13/5
Other hookups (continued)
AUX AUDIO IN hookup
If you have an individual audio component
(except PHONO)
Use the audio cords to connect the LINE OUT
jacks on the CD player, tape deck or MD deck
to the AUX IN jacks on the receiver so that you
can listen to stereo sources in surround sound.
140
Connecting the АС power
cord
AC power cord
Toa
wall outlet
AC OUTLET
AC OUTLET*
* The configuration, shape, and number of AC outlets
vary according to the model and country to which
the receiver is shipped.
Before connecting the AC power cord of this
receiver to a wall outlet, connect the speaker
system to the receiver (page 15).
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
If you connect other audio/video components to
the AC OUTLET(s) on the receiver, the
receiver will supply power to the connected
component(s), allowing you to turn the whole
system on or off when you turn the receiver on
or off.
Caution
Make sure that the total power consumption of the
component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or TVs
to this outlet.
Hooking Up and Settin
Speaker system hookups
Required cords
Speaker cords (not supplied)
(+) = <
©)
Active sub woofer
Center speaker
ЕН Monaural audio cord (not supplied)
Black ce Bp
(HT
Surround back
speaker
AC OUTLET
SPEAKERS
FRONT B*
Surround speaker
(R)
Surround speaker
(L)
Front speaker A
(R)
Front speaker A
(L)
ж Tf you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals.
You can select the front speakers you want to use with the SPEAKERS (OFF/A/B/A+B) button (page 24).
continued
шә}ѕ/5 sayeods әц} ап Burgos pue ап BurxyooH H
15/5
Speaker system hookups (continued)
Notes
* Twist the stripped ends of the speaker cords about
2/3 inch. Be sure to match the speaker cord to the
appropriate terminal on the components: + to + and
— to —. If the cords are reversed, the sound will be
distorted and will lack bass.
If you use speakers with low maximum input rating,
adjust the volume carefully to avoid excessive
output on the speakers.
To avoid short-circuiting the
speakers
Short-circuiting of the speakers may damage
the receiver. To prevent this, make sure to take
the following precautions when connecting the
speakers.
Make sure the stripped ends of each
speaker cord does not touch another
speaker terminal, the stripped end of
another speaker cord, or the metal parts of
the receiver.
Examples of poor conditions of the
speaker cord
Stripped speaker cord is touching another
Speaker terminal.
16°
Stripped cords аге touching each other
due to excessive removal of insulation.
Stripped cords are not fully attached and
are touching the rear panel of the receiver.
After connecting all the components,
speakers, and AC power cord, output
a test tone to check that all the
speakers are connected correctly.
For details on outputting a test tone,
see page 22.
If no sound is heard from a speaker while
outputting a test tone or a test tone is output
from a speaker other than the one whose name
is currently displayed on the receiver, the
speaker may be short-circuited. If this happens,
check the speaker connection again.
To avoid damaging your
speakers
Make sure that you turn down the volume
before you turn off the receiver. When you turn
on the receiver, the volume remains at the level
you turn off the receiver.
Performing initial setup
operations
Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.
Tip
To check the audio output during settings (to set up
while outputting the sound), check the connection
(page 22).
Clearing the receiver’s
memory
Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.
1 Turn off the receiver.
2 Hold down I/(5 for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
3 Press ENTER.
After “CLEARING” appears in the display
for a while, “CLEARED” appears.
The following are reset to their factory
settings.
* All settings in the SET UP, CUSTOM,
LEVEL and EQ menus.
* The sound field memorized for each
input selector and preset station.
* All sound field parameters.
* АП preset stations.
* All index names for input selector and
preset stations.
* The master volume is set to
“VOL MIN”.
Performing initial setup
operations
Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 56. See pages
17-22 for speaker settings and page 39 for
other settings.
Multi channel surround
setup
For the best possible surround sound, all
speakers should be the same distance from the
listening position (Ө).
However, the receiver lets you place the center
speaker up to 5 feet closer (Ө), the surround
speakers up to 15 feet closer (@) and the
surround back speaker up to 15 feet closer (@)
to the listening position.
The front speakers can be placed from 3 to 23
feet from the listening position (@).
You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).
When placing surround speakers to your side
(long room)
continued
walsAs ләгәб әц} ап Burjes рие ап BurxyooH H
17%
1845
Multi channel surround setup
(continued)
When placing surround speakers behind you
(wide room)
Tips
* When you set up the surround back speaker, set the
speaker at least 1 meter behind the listening
position. It is recommended to place the speaker at
an equal distance from the surround left and right
speakers. If there is no space behind the listening
position, set the speaker above the listening position
by placing it on a stand or hanging it from the
ceiling. To prevent speaker damage or injury in case
the speaker falls, make sure that it is properly fixed
in place.
* Since the active sub woofer does not emit highly
directional signals, you can place it wherever you
want.
Note
Do not place the center speaker further away from the
listening position than the front speakers.
Specifying the speaker
parameters
1 Press MAIN MENU repeatedly to select
“<SET UP>”.
2 Press < or > to select the parameter
you want to adjust.
Note
Some speaker settings may appear dimmed in the
display. This means that they have been changed
automatically due to other speaker settings or may
not be adjustable.
3 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
161]: (SUB WOOFER) S.W. ХХХ YES
ТЕР ІН; (FRONT) ХХХХХ LARGE
CENTER) XXXXX LARGE
1& 168; (SURROUND) XXXXX LARGE
[ (SURR BACK) XXX YES
ту {R} DIST. XX ft. 10 ft.
Тер DIST. XX ft. 10 ft.
181; 488} DIST. XX ft. 10 ft.
168; DIST. XX ft. 10 ft.
Б J68p XXXXXXX SIDE/LO
Ш Sub woofer selection (SW: S.W. XXX)
* If you connect a sub woofer, select “YES”.
* If you do not connect a sub woofer, select
“NO”. This activates the bass redirection
circuitry and outputs the LFE signals from other
speakers.
* In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
E Front speaker size (ТЕ ТЕ} ХХХХХ)
v
* If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
When the front speakers are set to “SMALL”,
the center and surround speakers are also
automatically set to “SMALL” (unless
previously set to *NO?).
When the sub woofer is set to “NO”, the front
speakers are automatically set to “LARGE” and
you cannot change this setting.
Ш Center speaker size (1С XXXXX)
* If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the center speaker to
“LARGE”.
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to LARGE") or sub woofer.*!
If you do not connect a center speaker, select
“NO”. The sound of the center channel will be
output from the front speakers.*”
Ш Surround speaker size
CELE ISR} XXXXX)
vv vv
* If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to "LARGE".
* Ifthe sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other “LARGE” speakers.
* If you do not connect surround speakers, select
“МО”.
Тїр
*1—*3 correspond to the following Dolby Pro Logic
modes
#1 NORMAL
*2 PHANTOM
*3 3 STEREO
Ш Surround back speaker selection
CEEE XXX)"
* If you connect a surround back speaker, select
“YES”,
* If you do not connect a surround back speaker,
select “NO”.
* These parameters are not available when “Surround
speaker size (251; SR)” is set to “NO”.
continued
UI91SÁS 1a9yeads oux ап bungas pue ап бшҹоон М
19/5
Multi channel surround setup
(continued)
Tip
Internally, the LARGE and SMALL settings for each
speaker determine whether or not the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
However, since bass sounds have a certain amount of
directionality, it is best not to cut them, if possible.
Therefore, even when using small speakers, you can
set them to “LARGE” if you want to output the bass
frequencies from that speaker. On the other hand, if
you are using a large speaker, but prefer not to have
bass frequencies output from that speaker, set it to
“SMALL”.
If the overall sound level is lower than you prefer, set
all speakers to “LARGE”. If there is not enough bass,
you can use the BASS parameter in the EQ menu to
boost the bass levels. To adjust the bass, see page 33.
АА
E Front speaker distance (1 tf Тар DIST.
XX ft.)
Set the distance from your listening position to
the front speakers (@ on page 17).
Ш Center speaker distance (1 © ; DIST.
XX ft.)
Set the distance from your listening position to
the center speaker. Center speaker distance
should be set from a distance equal to the front
speaker distance (@ on page 17) to a distance
5 feet closer to your listening position (@ on
page 17).
n АА
E Surround speaker distance (: SU <BR}
DIST. XX ft.)
Set the distance from your listening position to
the surround speakers. Surround speaker
distance should be set from a distance equal to
the front speaker distance (@ on page 17) to a
distance 15 feet closer to your listening
position (@ on page 17).
205
E Surround back speaker distance
(БВ DIST. XX ft.)
Set the distance from your listening position to
the surround back speaker. Surround back
speaker distance should be set from a distance
equal to the front speaker distance (@ on page
17) to a distance 15 feet closer to your listening
position (@ on page 17).
Tip
The receiver allows you to input the speaker position
in terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
5 feet closer than the front speakers.
Likewise, the surround speakers can not be set farther
away from the listening position than the front
speakers. And they can be no more than 15 feet
closer.
This is because incorrect speaker placement is not
conducive to enjoy surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is further
away.
For example, setting the center speaker distance
3-6 feet closer than the actual speaker position will
create a fairly realistic sensation of being "inside" the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound
stage.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
Ш Surround speaker placement
aa aa
({SL 5н; XXXXXXX)*
This parameter lets you specify the location
and height of your surround speakers for proper
implementation of the Digital Cinema Sound
surround modes. Refer to the illustration below.
* Select “SIDE/LO” if the location of your
surround speakers corresponds to section @
and Q.
* Select "SIDE/HT' if the location of your
surround speakers corresponds to section @
and Q.
* Select “BEHD/LO” if the location of your
surround speakers corresponds to section @
and Q.
* Select “BEHD/HI” if the location of your
surround speakers corresponds to section @
and Q.
* These parameters are not available when
“Surround speaker size (50; 2вя;)” is set to “NO”.
Tip
The surround speaker placement parameter is
designed specifically for implementation of the
Digital Cinema Sound modes with virtual elements.
With the Digital Cinema Sound modes, speaker
placement is not as critical as other modes. All modes
with virtual elements were designed under the
premise that the surround speaker would be located
behind the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing towards the listener from the
immediate left and right of the listening position, the
sound fields with virtual elements will not be
effective unless the surround speaker placement
parameter is set to “SIDE/LO” or “ЅІрЕ/НІ”.
Nevertheless, each listening environment has many
variables, like wall reflections, and you may obtain
better results using "BEHD/HT' if your speakers аге
located high above the listening position, even if they
are to the immediate left and right.
Therefore, although it may result in a setting contrary
to the "Surround speaker placement" explanation, we
recommend that you playback multi channel surround
encoded software and listen to the effect each setting
has on your listening environment. Choose the setting
that provides a good sense of spaciousness and that
best succeeds in forming a cohesive space between
the surround sound from the surround speakers and
the sound of the front speakers. If you are not sure
which sounds best, select “BEHD/LO” or
"BEHD/HI" and then use the speaker distance
parameter and speaker level adjustments to obtain
proper balance.
continued
шәҙе/6 ләлеәбв ou: dn &unes pue ап 5uryooH М
2155
Multi channel surround setup
(continued)
Adjusting the speaker level
Use the remote while seated in your listening
position to adjust the level of each speaker.
Note
The receiver incorporates a new test tone with a
frequency centered at 800 Hz for easier speaker level
adjustment.
1 Press I/(5 on the remote to turn on the
receiver.
2 Press TEST TONE on the remote.
You will hear the test tone from each
speaker in sequence.
Front (left) — Center — Front (right) —>
Surround (right) — Surround back —
Surround (left) — Sub woofer
3 Adjust the speaker level and balance
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu, see page
32.
While adjusting, the test tone is output from
the speaker whose adjustment is performed.
4 Press TEST TONE again to turn off the
test tone.
Tip
You can adjust the level of all speakers at the same
time. Press MASTER VOL +/— on the remote or turn
MASTER VOLUME on the receiver.
Notes
* The adjusted value are shown in the display during
adjustment.
* Although these adjustments can also be made via
the front panel using the LEVEL menu (when the
test tone is output, the receiver switches to the
LEVEL menu automatically), we recommend you
follow the procedure described above and adjust the
speaker levels from your listening position using the
remote.
2205
Checking the connections
After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
1 Press 1/0 to turn on the receiver.
2 Turn on the component that you
connected (e.g., CD player or tape
deck).
3 Press the input selector button (e.g.,
CD/SACD or MD/TAPE) to select the
component (program source).
4 start playing.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 50 and take the
appropriate measures to correct the problem.
Basic Operations
Selecting the component
Input Selector buttons
Press the input selector button to select the
component you want to use.
To select Press
VCR VIDEO 1 or VIDEO 2
Satellite tuner VIDEO 2
Camcorder or VIDEO 3
video game
DVD player DVD
MD or Tape deck MD/TAPE
CD or Super Audio CD/SACD
CD player
Built in tuner TUNER FM/AM
An audio component AUX
After turning on the component you selected,
select the component and play the program
source.
* After selecting VCR, camcorder, video game or
DVD player, turn on the TV and set the TV's
video input to match the component you
selected.
INPUT MODE
Press INPUT MODE to select the input mode
for your digital components.
Each time you press the button, the input mode
of the currently selected component switches.
Select To
AUTO IN Give priority to digital
signals when there are both
digital and analog
connections. If there are no
digital signals, analog is
selected.
COAX IN Specify the digital audio
signals input to the
DIGITAL COAXIAL input
jacks.
OPT IN Specify the digital audio
signals input to the
DIGITAL OPTICAL input
jacks.
ANALOG Specify the analog audio
signals input to the AUDIO
IN (L/R) jacks.
Note
When the 96 kHz digital signal is input, the equalizer,
sound field and effect level do not function.
MULTI CH IN
Press MULTI CH IN to enjoy the audio source
connected to the MULTI CH IN jacks. You can
adjust balance and level of all the speakers.
When this function is on, the equalizer and
effect level are turned off.
MULTI CHANNEL DECODING
indicator
This indicator lights up when the unit is
decoding signals recorded in a multi channel
format.
continued
ѕиоцеләад oiseg i
2355
Selecting the component (continued)
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
* When the headphones are connected, speaker
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
* When the headphones are connected, selectable
sound fields are HP 2CH, HP MULTI or HP
THEA (page 28).
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP A — SP B —> SPA and SP B —»
No display*
To drive Select
Speaker System A
(Connected to the
SPEAKERS FRONT A
terminals)
SP A (default setting)
Speaker System B SPB
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System A
and B (Connected to the
SPEAKERS FRONT A
and B terminals)
SP A and SPB
24%
* Tf you do not want to drive Speaker System A
and B, press SPEAKERS (OFF/A/B/A+B) until
“SP A” and “SP В” do not light up in the display
(no display).
Changing the display
Press DIMMER repeatedly to adjust the
brightness of the display (3 steps).
DISPLAY
Each time you press DISPLAY, the display
changes cyclically as follows:
Index name of the component* — Selected
component — Sound field applied to the
program source
When the tuner is selected
Index name of the preset station* —
Frequency — Sound field applied to the band
or the preset station
* Index name appears only when you have assigned
one to the component or preset station (page 37).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input selector.
Enjoying Surround Sound
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home. You can also
customize the sound fields to obtain the sound
you want by changing the surround parameter.
To fully enjoy surround sound, you must
register the number and location of your
speakers. See “Multi channel surround setup"
starting from page 17 to set the speaker
parameters before enjoying surround sound.
Using only the front
speakers (2 Channel Stereo)
Press 2CH.
The 2CH indicator lights up and “2CH ST."
appears in the display.
This mode outputs the sound from the front left
and right speakers only. Standard 2 channel
(stereo) sources completely bypass the sound
field processing. Multi channel surround
formats are downmixed to 2 channel.
Note
No sound is output from the sub woofer when
“2CH ST.” is selected. To listen to 2 channel (stereo)
sources using the front left and right speakers and a
sub woofer, press A.F.D. repeatedly to select
“A.F.D. AUTO”.
Enjoying higher fidelity
sound
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
Mode Decoding Mode
A.F.D. AUTO As encoded
DOLBY PL Dolby Pro Logic
PLII MOV
Dolby Pro Logic II
PLII MUS
NEO6 CIN
DTS Neo:6
NEO6 MUS
Decoding the input audio
signal automatically
Press A.F.D. repeatedly to select
“A.F.D. AUTO".
The A.F.D. indicator lights up.
This mode automatically detects the type of
audio signal being input (Dolby Digital, DTS,
or standard 2 channel stereo) and performs the
proper decoding if necessary. This mode
presents the sound as it was recorded/encoded,
without adding any effects (e.g. reverberation).
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
punos рипомпс &uiÁKofu3 [|
continued
25°5
Enjoying higher fidelity sound
(continued)
Enjoying stereo sound in
multi channel (Dolby Pro
Logic П) and DTS Neo:6
This receiver incorporates with Dolby Pro
Logic II which has movie mode and music
mode, as well as DTS Neo:6 which has cinema
mode and music mode. The receiver can
reproduce 2 channel sound in 5.1 channel
through Dolby Pro Logic II and 6 channels
through DTS Neo:6.
Press A.F.D. repeatedly to select
“DOLBY PL”, “РЕП MOV”, “РЕП MUS”,
"NEO6 СІМ” or “NEO6 MUS”.
The A.F.D. indicator lights up and the selected
type of decoding is indicated in the display.
Ш DOLBY PL (Dolby Pro Logic)
Performs the Pro Logic decoding. Software
with multi channel surround audio signals is
played back according to the way it was
recorded. Software with 2 channel audio
signals is decoded with Dolby Pro Logic to
create surround effects (4 channels).
B PLII MOV (Pro Logic II Movie)
Performs the Pro Logic II movie mode
decoding. This setting is ideal for the movies
encoded in Dolby Surround. Besides, this mode
can reproduce the sound in 5.1 channel when
watching the videos of old movies or in the
dubbed language.
Ш РЇП MUS (Pro Logic II Music)
Performs the Pro Logic II music mode decoding.
This setting is ideal for the normal stereo
sources, such as CDs.
Note
Dolby Pro Logic and Dolby Pro Logic II decoding
does not function for DTS format signals.
2605
Ш NEO6 СІМ (DTS Мео:6 Cinema)
Performs the DTS Neo:6 Cinema mode
decoding. This setting is ideal for movies
encoded in DTS Surround.
Ш NEO6 MUS (DTS Neo:6 Music)
Performs the DTS Neo:6 Music mode decoding.
This setting is ideal for normal stereo sources
such as CDs.
Selecting a sound field
You can enjoy surround sound simply by
selecting one of the pre-programmed sound
fields according to the program you want to
listen to.
Press To select
MOVIE C.ST.EX A [Ж
C.ST.EX B ИЯ
C.ST.EX C ИЯ
MUSIC HALL
JAZZ
CONCERT
* Sound field with mark use DCS technology.
About DCS (Digital Cinema Sound)
In collaboration with Sony Pictures
Entertainment, Sony measured the sound
environment of their studios and integrated the
data of the measurement and Sony's own DSP
(Digital Signal Processor) technology to
develop "Digital Cinema Sound". In a home
theater, “Digital Cinema Sound” simulates an
ideal movie theater sound environment based
on the preference of the movie director.
Enjoying movies with Cinema
Studio EX
Cinema Studio EX is ideal for enjoying the
movie software encoded with multi channel
format, such as the Dolby Digital DVD. This
mode reproduces the sound characteristics of
Sony Pictures Entertainment’s studios.
Press MOVIE repeatedly to select
“C.ST.EX A", “С.ЅТ.ЕХ B” or “C.ST.EX С”.
The MOVIE indicator lights up and the
selected sound field is indicated in the display.
Ш C.ST.EX A (Cinema Studio EX А)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Cary Grant
Theater" cinema production studio. This is a
standard mode, great for watching most any
type of movie.
Ш C.ST.EX B (Cinema Studio EX B)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Kim Novak
Theater" cinema production studio. This mode
is ideal for watching science-fiction or action
movies with lots of sound effects.
Ш C.ST.EX C (Cinema Studio EX С)
Reproduces the sound characteristics of the
Sony Pictures Entertainment scoring stage.
This mode is ideal for watching musicals or
classic films where music is featured in the
soundtrack.
About Cinema Studio EX
Cinema Studio EX consists of the following
three elements.
* Virtual Multi Dimension
Creates 5 sets of virtual speakers
surrounding the listener from a single pair of
actual surround speakers.
* Screen Depth Matching
In a movie theater, sound seems to come
from inside the image reflected on the movie
screen. This element creates the same
sensation in your listening room by shifting
the sound of the front speakers "into" the
screen.
* Cinema Studio Reverberation
Reproduces the reverberations peculiar to a
movie theater.
Cinema Studio EX is the integrated mode
which operates these elements simultaneously.
Notes
* The effects provided by the virtual speakers may
cause increased noise in the playback signal.
* When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
Selecting other sound fields
Press MUSIC repeatedly to select the
sound field you want.
The MUSIC indicator lights up and the current
sound field is indicated in the display.
Ш HALL
Reproduces the acoustics of a rectangular
concert hall.
W JAZZ (Jazz Club)
Reproduces the acoustics of a jazz club.
Ш CONCERT (Live Concert)
Reproduces the acoustics of a 300-seat live
concert.
To turn the surround effect off
Press A.F.D. repeatedly to select “A.F.D.
AUTO?” or press 2CH.
punos punong Бш Коча
continued
27 US
Selecting a sound field (continued)
When headphones are connected
You can select the following sound fields only.
Ш HP 2CH (Headphone 2СН)
Output the sound in 2 channel (stereo).
Standard 2 channel (stereo) sources completely
bypass the sound field processing. Multi
channel surround formats are downmixed to 2
channel.
Ш HP MULTI (Headphone Multi)
Outputs the front analog signal from MULTI
CH IN jacks.
Ш HP THEA (Headphone Theater)
Allows you to experience a theater like
environment while listening through a pair of
headphones.
Tips
* The receiver lets you apply the last selected sound
field to a program source whenever it is selected
(Sound Field Link). For example, if you listen to
CD with “JAZZ” as the sound field, change to a
different program source, then return to CD,
"JAZZ" will be applied again.
* You can identify the encoding format of DVD
software, etc. by looking at the logo on the
package.
— 00059]. Dolby Digital discs
- DO petsysuanouns]; Dolby Surround encoded
programs
- ЕЗ: DTS Digital Surround encoded programs
* When sound signals with a sampling frequency of
96 kHz are input, the sound signals are output in
stereo automatically, and the sound field is turned
off.
2805
Selecting the surround
back decoding mode
(SURR BACK DECODING)
This function lets you select the decoding mode
for the surround back signals of the multi
channel input stream.
By decoding the surround back signal of DVD
software (etc.) recorded in the Surround EX
format*, you can enjoy the surround sound
intended by the filmmakers.
* Dolby Digital EX, DTS-ES Matrix, DTS-ES
Discrete 6.1, etc.
However, this function is only effective when
used with A.F.D.
1 Press A.F.D.
2 Press SURR BACK DECODING
repeatedly to select the surround back
decoding mode.
"SB XXXX" appears in the display.
When the receiver is decoding the surround
back signal, the “SURR BACK DECODING”
indicator lights up.
Surround back decoding modes
* SB OFF
* SB AUTO
* SBMTRX
For details, see “How to select the surround
back decoding mode" on the next page.
Tip
You can select the surround back decoding mode
using "SB XXXX" in the CUSTOM menu (page 39).
Note
You cannot select the surround back decoding mode
when using the 2CH ST. (page 25), when MULTI CH
IN is selected or when headphones are connected.
How to select the surround back decoding mode
You can select the surround back mode you want according to the input stream.
When you select “SB OFF”
Surround back decoding is not performed.
When you select “SB AUTO”
When the input stream contains the 6.1 channel decode flag*!, the appropriate decoder is applied to
decode the surround back signal.
For the DTS-ES Matrix 6.1 source, DTS Matrix decoder is applied.
For the DTS-ES Discrete 6.1 source, DTS Discrete decoder is applied to reproduce the Discrete 6.1
channel signal.
Input stream Output channel Applied surround back decoder
Dolby Digital 5.1 5.1 —
DTS 5.1 5.1 -
Dolby Digital ЕХ*? 6.1 Matrix decoder conforms to Dolby Digital EX
DTS-ES Matrix 6.1*? 6.1 DTS Matrix decoder
DTS-ES Discrete 6.1** 6.1 DTS Discrete decoder
When you select “SB MTRX”
Dolby Digital EX is applied to decode the surround back signal regardless of the 6.1 channel decode
flag*! in the input stream. This decoder conforms to Dolby Digital EX and functions the same as the
decoders used in movie theaters. This decoder can be used for all the Surround EX formats (Dolby
Digital EX, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1).
punos рипомпс &uiAofu3 |
Input stream Output channel Applied surround back decoder
Dolby Digital 5.1 6.1 Matrix decoder conforms to Dolby Digital EX
Dolby Digital EX 6.1 Matrix decoder conforms to Dolby Digital EX
DTS 5.1 6.1 Matrix decoder conforms to Dolby Digital EX
DTS-ES Matrix 6.123 6.1 Matrix decoder conforms to Dolby Digital EX
DTS-ES Discrete 6.1** 6.1 Matrix decoder conforms to Dolby Digital EX
*! 6.] channel decode flag is the information recorded in software like DVDs.
*? Dolby Digital DVD that includes a Surround EX flag. The Dolby Corporation web page can help you
distinguish Surround EX films.
*3 Software encoded with a flag to denote it has both Surround EX and 5.1 channel signals.
** Software encoded with both 5.1 channel signals and an extension stream designed for returning those signals to
6.1 discrete channels. Discrete 6.1 channel signals are DVD specific signals not used in movie theaters.
29 US
Understanding the multi channel surround displays
12
15
SW: Lights up when sub woofer selection is
set to “YES” (page 18) and the audio signal is
output from the SUB WOOFER jacks.
SP A*: Lights up when you select to drive
Speaker System A.
SP B*: Lights up when you select to drive
Speaker System B.
* Does not light up when you connect
headphones to the PHONES jack.
ПП DIGITAL ЕХ: “ПП DIGITAL” lights up
when the receiver is decoding signals
recorded in the Dolby Digital format.
“ПП DIGITAL EX" lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
ПП PRO LOGIC ЇЇ: “ПП PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “ПП PRO LOGIC П” lights up when
Pro Logic II processing (“РІЛ MOV” or
"PLII MUS”) is applied (page 26). However,
both indicators do not light up if the center
and surround speakers are set to “МО”, and
"A.F.D. AUTO”, “DOLBY PL”, “PLII
MOV” or “РІЛ MUS” is selected.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding does not function for DTS format
signals.
L exIOOPRO Loo LOGIC II ecient: i emm
STEREO MONO SLEEP
11
10 9
10
11
DTS-ES: “DTS” lights up when DTS signals
are input. “DTS-ES” lights up when DTS-ES
signals are input.
Note
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is NOT set to “ANALOG”
(page 23).
NEO:6: Lights up when DTS Neo:6
processing (“NEO6 CIN" or “NEO6 MUS")
is applied.
Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 34—36 for tuner operations.
SLEEP: Lights up when sleep timer is
activated.
EQ: Lights up when the equalizer functions.
D.RANGE: Lights up when dynamic range
compression is activated. See page 32 to
adjust the dynamic range compression.
MULTI CH IN: Lights up when MULTI CH
IN is selected.
13
14
15
16
COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and when the sound of the
LFE channel signal is actually being
reproduced.
Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters
vary to show how the receiver downmixes the
source sound (based on the speakers settings).
When using sound fields like *C.ST.EX", the
receiver adds reverberation based on the
source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SB (Surround Back (the
surround back components obtained by 6.1
matrix decoding)).
Example:
Recording format (Front/Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
СДА
SL SR
Customizing sound fields
By adjusting the surround parameters and the
equalization of the front speakers, you can
customize the sound fields to suit your
particular listening situation.
Once you customize a sound field, the changes
are stored in the memory indefinitely. You can
change a customized sound field any time by
making new adjustments to the parameters.
See the tables on pages 57—58 for the
parameters available in each sound field.
To get the most from multi
channel surround sound
Position your speakers and do the procedures
described in “Multi channel surround setup”
starting from page 17 before you customize a
sound field.
Note on the displayed items
The setup items you can adjust in each menu
vary depending on the sound field. Certain
setup parameters may be dimmed in the
display. This means that the selected parameter
is either unavailable or fixed and unchangeable.
continued
punos punouing 6bulfofuq lii
31/5
Customizing sound fields (continued)
Adjusting the level
parameters
The LEVEL menu contains parameters that let
you adjust the balance and volumes of each
speaker. You can also customize various
aspects of the current sound field. The settings
are applied to all sound fields except for EFCT.
parameter. For EFCT. parameter, the settings
are stored individually for each sound field.
1 Start playing a program source
encoded with multi channel surround
sound.
2 Press MAIN MENU repeatedly to select
“<LEVEL>”.
3 Press < or > to select the parameter
you want to adjust.
4 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
Initial settings
Parameter Initial setting
ТЕР ДЕР BAL. L/R XX BALANCE
CTR XXX.X dB 0 dB
SUR.L. XXX.X dB 0 dB
SUR.R. XXX.X dB 0 dB
SB XXX.X dB 0 dB
S.W. XXX.X dB 0 dB
Jp. RANGE: COMP. XXX OFF
EFCT. XXX STD
3205
n АА
Front balance (ГІ); <
Y Мы
т
- BAL. L/R XX)
Lets you adjust the balance between front left
and right speakers.
Center level (CTR XXX.X dB)
Lets you adjust the level of the center speaker.
Surround left level (SUR.L. XXX.X
dB)
Lets you adjust the level of the surround left
speaker.
Surround right level (SUR.R. XXX.X
dB)
Lets you adjust the level of the surround right
speaker.
Surround back level (SB XXX.X dB)
Lets you adjust the level of the surround back
speaker.
Sub woofer level (S.W. XXX.X dB)
Lets you adjust the level of the sub woofer.
Dynamic range compressor (-D. RANGE-
COMP. XXX)
Lets you compress the dynamic range of the
sound track. This may be useful when you want
to watch movies at low volumes late at night.
We recommend using the “МАХ” setting.
* To reproduce the sound track with no
compression, select “OFF”.
* To reproduce the sound track with the dynamic
range intended by the recording engineer, select
“STD”.
* To reproduce a dramatic compression of the
dynamic range, select “МАХ”.
Note
Dynamic range compression is possible with Dolby
Digital sources only.
Effect level (EFCT. XXX)
Lets you adjust the “presence” of the current
surround effect.
Adjusting the equalizer
parameter
The EQ menu contains parameters that let you
adjust the equalizer of the front speakers for
optimum sound. The settings are applied to all
sound fields.
1 Start playing a program source
encoded with multi channel surround
sound.
2 Press MAIN MENU repeatedly to select
“<EQ>”.
3 Press < or > to select the parameter
you want to adjust.
4 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
Initial settings
Parameter Initial setting
BASS XXX.X dB 0 dB
TREB. XXX.X dB 0 dB
EQ XXX OFF
To turn on/off the equalizer
1 Press MAIN MENU repeatedly to select
“<EQ>”.
2 Press < or > repeatedly to select
“EQ XXX”.
3 Turn the jog dial to select “EQ ON” or
“EQ OFF”.
Note
The EQ indicator in the display lights up when the
equalizer is turned on. When you adjust the equalizer
using the EQ parameters, the settings are applied to
all sound fields and can be reproduced whenever you
turn on the equalizer.
Bass (BASS XXX.X dB)
Lets you adjust the gain of bass.
Treble (TREB. XXX.X dB)
Lets you adjust the gain of treble.
Resetting customized sound
fields to the factory settings
1 If the power is on, press 1/00) to turn off
the power.
2 Hold down 2СН and press 1/0).
“SF. CLR.” appears in the display and all
sound fields are reset at once.
punos рипомпс &uiKofu3 li
3255
з4%
Receiving Broadcasts
Before receiving broadcasts, make sure you
have connected FM and AM antennas to the
receiver (page 7).
Direct tuning
You can enter a frequency of the station you
want directly by using the numeric buttons on
the supplied remote. For details on the buttons
used in this section, see pages 42-49.
1 Press TUNER on the remote repeatedly
to select the FM or AM band.
The last received station is tuned in.
2 Press D. TUNING on the remote.
3 Press the numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
(D * (0) * (2) * 8)» (0)
Example 2: AM 1350 kHz
(You don't have to enter the last *0" when the
tuning scale is set to 10 KHz.)
O*@*O©*O©
If you cannot tune in a station and the
entered numbers flash
Make sure you’ve entered the right
frequency. If not, repeat steps 2 and 3.
If the entered numbers still flash, the
frequency is not used in your area.
4 If you’ve tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
5 Repeat steps 1 to 4 to receive another
station.
Tips
* If you do not remember the precise frequency, press
TUNING + or TUNING — after entering the value
close to the frequency you want. The receiver
automatically tunes in the station you want. If the
frequency seems to be higher than the entered
value, press TUNING +, and if the frequency seems
to be lower than the entered value, press
TUNING -.
If “STEREO” flashes in the display and the FM
stereo reception is poor, press FM MODE to change
to monaural (MONO). You will not be able to enjoy
the stereo effect, but the sound will be less
distorted. To return to stereo mode, press
FM MODE again.
The tuning scale differs depending on the area code
as shown in the following table. For details on area
codes, see page 4.
Area code FM AM
U, CA 100kHz 10kHz*
* The AM tuning scale can be changed (page 54).
Automatic tuning
If you don’t know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1 Press TUNER FM/AM repeatedly to
select the FM or AM band.
The last received station is tuned in.
2 Press TUNING + or TUNING -.
Press TUNING + to scan from low to high;
press TUNING - to scan from high to low.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end of
the band
Scanning is repeated in the same direction.
3 To continue scanning, press TUNING +
or TUNING - again.
Preset tuning
After you have tuned in stations using Direct
Tuning or Automatic Tuning, you can preset
them to the receiver. Then you can tune in any
of the stations directly by entering its
2-character preset code using the supplied
remote. Up to 30 FM or AM stations can be
preset. The receiver will also scan all the
stations that you have preset.
Before tuning to preset stations, be sure to
preset them by performing steps on “Presetting
radio stations".
Presetting radio stations
1 Press TUNER ЕМ/АМ.
The last received station is tuned in.
2 Tune in the station that you want to
preset using Direct Tuning (page 34) or
Automatic Tuning (page 35).
3 Press MEMORY.
"MEMORY" appears in the display for a
few seconds.
Do steps 4 to 5 before “MEMORY” goes
out.
4 Press PRESET TUNING + or PRESET
TUNING - repeatedly to select a preset
station number.
Each time you press the button, the preset
station number changes in the
corresponding number and direction as
follows:
A1«—A2«»...—— A0«—B1«-—B2«...— B0
аа]
If “MEMORY” goes ош before you press
the preset station number, start again from
step 3.
5 Press MEMORY again to store the
station.
If “MEMORY” goes out before you can
store the station, start again from step 3.
6 Repeat steps 2 to 5 to preset another
station.
To change a preset number to
another station
Do steps 1 to 5 to preset a new station to the
number.
Tip
In Step 4, you can also use the remote to select a
preset station number. Press SHIFT repeatedly to
select a memory page (A, B or C) and then press the
numeric button to select a preset number.
continued
s}seopeoig Buy
3545
Preset tuning (continued)
Tuning to preset stations
You can tune the preset stations by either of the
following two ways.
Scanning the preset stations
1 Press TUNER FM/AM.
The last received station is tuned in.
2 Press PRESET TUNING + or PRESET
TUNING - repeatedly to select the
preset station you want.
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
»A1«—A2«€»...—— A0 B1 B2«»...—— B04
—C0«...C2C1—
Using the preset codes
Use the supplied remote to perform the
following operations. For details on the buttons
used in this section, see pages 42-49.
1 Press TUNER on the remote.
The last received station is tuned in.
2 Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.
364
Other Operations
Naming preset stations
and program sources
You can enter a name (index name) of up to 8
characters for preset stations and program
sources. These names (for example, “УН$”)
appear in the receiver’s display when a station
or program source is selected. Note that no
more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8MM”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MD/TAPE jacks.
1 To name a preset station
Press TUNER FM/AM, then tune іп the
preset station you want to create an
index name for.
If you are not familiar with how to tune in
preset stations, see “Tuning to preset
stations” on page 36.
To name a program source
Select the program source (component)
to be named.
2 Press MAIN MENU repeatedly to select
“<CUSTOM>”.
3 Press < or > repeatedly to select
“NAME IN”.
4 Create an index name by using the jog
dial and < or >:
Turn the jog dial to select a character, then
press > to move the cursor to the next
position.
To insert a space
Turn the jog dial until a blank space appears
in the display.
If you’ve made a mistake
Press < or > repeatedly until the character
to be changed flashes, then turn the jog dial
to select the character you want.
5 press ENTER.
6 Repeat steps 2 to 5 to assign index
name for another station or program
source.
Recording
Before you begin, make sure you’ve connected
all components properly.
Recording on an audio tape
or MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.
1 Select the component to be recorded.
2 Prepare the component for playing.
For example, insert a CD into the CD
player.
3 Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4 Start recording on the recording deck,
then start playback on the playback
component.
continued
ѕиоцеләад 19410
37 US
Recording (continued)
Notes
* Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
* The analog audio signals of the current input source
is output from the REC OUT jacks.
* When MULTI CH IN is selected, the analog audio
signals of the current input source is output from the
REC OUT jacks.
* You cannot record a digital audio signal using a
component connected to the analog MD/TAPE
OUT jacks. To record a digital audio signal,
connect a digital component to the DIGITAL MD/
TAPE OUT jacks.
* Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources.
* When MULTI CH IN is selected, no signals are
output from DIGITAL OUT jacks (MD/TAPE
OPTICAL OUT).
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1 Select the program source to be
recorded.
2 Prepare the component for playing.
For example, insert the DVD you want to
record into the DVD player.
3 Insert a blank video tape into the VCR
(VIDEO 1) for recording.
4 start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape or
DVD. Locate the point where you want to start
recording from another audio source, select the
program source, then start playback. The audio from
that source will be recorded onto the audio track of
the video tape instead of the audio from the original
medium. To resume audio recording from the original
medium, select the video source again.
3845
Notes
* Make sure to make both digital and analog
connections to the VIDEO 2 and DVD inputs.
Analog recording is not possible if you make only
digital connections.
* When MULTI CH IN is selected, the analog audio
signals of the current input source is output from the
REC OUT jacks.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press ALT, then press SLEEP on the
remote while the power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 — 1-30-00 —> 1-00-00 — 0-30-00
— OFF
Tip
To check the remaining time before the receiver turns
off, press SLEEP. The remaining time appears in the
display.
Adjustments using the
CUSTOM menu
The CUSTOM menu allows you to make the
following adjustments.
1 Press MAIN MENU repeatedly to select
“<CUSTOM>”.
2 Press < or > to select the parameter
you want to adjust.
Certain setup parameters may be dimmed in
the display. This means that the selected
parameter is either unavailale or fixed and
unchangeable due to sound field (pages 25—
28) or other settings.
3 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
SB XXXX AUTO
DEC. XXXX PCM (for DVD,
CD/SACD and MD/TAPE),
AUTO (for VIDEO 2)
P.SAVE.XXX OFF
Ш Surround back decoding mode
(SB XXXX)
You can also set this parameter using SURR
BACK DECODING on the front panel. For
details, see page 28.
Ш Decode priority (DEC. ХХХХ)
Sets the appropriate decoding for incoming
digital signals.
* PCM priority mode (DEC. PCM)
Use to enjoy playback from audio CD
(PCM), DVD and MD. When used with
media other than CD, DVD or MD, you may
experience noise and ^DEC. ERR." appears
in the display. If this happens, switch to
AUTO mode.
* AUTO mode (DEC. AUTO)
Use to enjoy playback from audio CD
(PCM), DVD, DTS-CD and DTS-LD
sources. However, with audio CDs, you may
not be able to listen the very first moments
of each track.
Normally, use as-is with the initial settings
above.
Ш CONTROL A1II power save function
(P.SAVE.XXX)
When set to “OFF”, you can turn on the
receiver automatically when the component
connected via monaural miniplug cord (see
page 13) is turned on and the playback is
started. However, the receiver will not be
turned on automatically if set to *ON".
When set to “ON”, you can save the power
consumption of the receiver during standby
mode.
Changing the command
mode of the receiver
This function is useful when you use 2 Sony
receivers in the same room.
1 Turn off the receiver.
2 Hold down ENTER and press 1/0) to
turn on the receiver.
“C.MODE.AVX” appears in the display.
Each time you repeat the procedure above,
the display changes as follows:
C.MODE.AVI «— C. MODE.AV2
Tip
The initial setting is "C. MODE.AV2".
Notes
* The initial setting for the command mode of the
supplied remote is “AV2”.
* If the command mode of the receiver and the
remote is different, you cannot use the remote to
operate the receiver.
ѕиоцеләад 19410 H
39 US
CONTROL A111 control
system
Getting Started
This section explains the basic functions
of the CONTROL А1П Control System.
Certain components have special
functions, such as “CD Synchro Dubbing”
on cassette decks, that require CONTROL
A1II connections. For detailed information
regarding specific operations, be sure to
also refer to the Operating Instructions
supplied with your component(s).
The CONTROL А1П Control System was
designed to simplify the operation of audio
systems composed of separate Sony
components. CONTROL А1П connections
provide a path for the transmission of control
signals which enable automatic operation and
control features usually associated with
integrated systems.
Currently, CONTROL А1П connections
between a Sony CD player, amplifier
(receiver), MD deck and cassette deck provide
automatic function selection and synchronized
recording.
In the future, the CONTROL А1П connection
will work as a multifunction bus allowing you
to control various functions for each
component.
Notes
* The CONTROL А1П Control System is designed to
maintain upward compatibility as the Control
System is upgraded to handle new functions. In this
case, however, older components will not be
compatible with the new functions.
* Do not operate a 2 way remote control unit when
the CONTROL АШ jacks are connected via a PC
interface kit to a personal computer running “MD
Editor" or similar application. Also, do not operate
the connected component in a manner contrary to
the functions of the application, as this may cause
the application to operate incorrectly.
40%
CONTROL А1П and CONTROL A1
compatibility
The CONTROL А1 control system has been
updated to the CONTROL А1П which is the
standard system in the Sony 300 disc CD changer
and other recent Sony components. Components
with CONTROL А1 jacks are compatible with
components with CONTROL ALII, and can be
connected to each other. Basically, the majority of
the functions available with the CONTROL А1
control system will be available with the
CONTROL АШ control system.
However, when making connections between
components with CONTROL А1 jacks and
components with CONTROL А1П jacks, the
number of functions that can be controlled may be
limited depending on the component. For detailed
information, refer to the operating instructions
supplied with the component(s).
Connections
Connect monaural mini-plug cords in series to
the CONTROL АШ jacks on the back of each
component. You can connect up to 10
CONTROL А1П compatible components in
any order. However, you can connect only one
of each type of component (i.e., 1 CD player, 1
MD deck, 1 tape deck and 1 receiver).
(You may be able to connect more than one CD
player or MD deck, depending on the model.
Refer to the operating instructions supplied
with the respective component for details.)
Example
Amplifier CD MD Tape Other
(Receiver) player deck deck component
In the CONTROL А1П control system, the
control signals flow both ways, so there is no
distinction of IN and OUT jacks. If a
component has more than one CONTROL АШ
jack, you can use either one, or connect
different components to each jack.
Jacks and connection examples
CONTROL A11
©
(9) «= ==
CONTROL Аш
CD player
oqar
oy- L
MD deck
On CONTROL A1 jacks and
connections
It is possible to make connections between
CONTROL A1 and CONTROL А1П jacks.
For details regarding particular connections or
set up options, refer to the operating
instructions supplied with the component(s).
About the connecting cord
Some CONTROL A1 compatible components
are supplied with a connecting cord as an
accessory. In this case, use the connecting cord
for your connection.
When using a commercially available cord, use
a monaural mini-plug cord less than 2 meters
long, with no resistance (such as the Sony
RK-G69HG).
Basic Functions
The CONTROL А1П functions will operate as
long as the component you want to operate is
turned on, even if all of the other connected
components are not turned on.
Automatic function selection
When you connect a CONTROL АШ
compatible Sony amplifier (or receiver) to
other Sony components using monaural mini-
plug cords, the function selector on the
amplifier (or receiver) automatically switches
to the correct input when you press the play
button on one of the connected components.
Notes
* You must connect a CONTROL А1 compatible
amplifier (receiver) using a monaural mini-plug
cord in order to take advantage of the automatic
function selection feature.
This function only works when the components are
connected to the amplifier (or receiver) inputs
according to the names on the function buttons.
Certain receivers allow you to switch the names of
the function buttons. In this case, refer to the
operating instructions supplied with the receiver.
When recording, do not play any components other
than the recording source. It will cause the
automatic function selection to operate.
Synchronized recording
This function lets you conduct synchronized
recording between the selected source and
recorder components.
1 Set the function selector on the
amplifier (or receiver) to the source
component.
2 Set the source component to pause
mode (make sure both the B® and II
indicators light together).
3 Set the recorder component to the
REC-PAUSE mode.
4 Press PAUSE on the recorder
component.
The source component is released from
the pause mode, and recording begins
shortly thereafter.
When playback ends from the source
component, recording stops.
Notes
* Do not set more than one component to the pause
mode.
* Certain recorder components may be equipped with
a special synchronized recording function that uses
the CONTROL А Ш Control System, such as
“CD Synchro Dubbing”. In this case, refer to the
operating instructions supplied with the recorder
component.
ѕиоцеләад 19410 H
4155
Operations Using the Remote RM-PP412
You can use the remote RM-PP412 to operate
the components in your system.
Remote button
description
Before you use your
remote S56
SYSTEMSTANDBY SLEEP
VIDEO! VIDEO2 VIDEOS DVD
уг Aye
TVSAT МОТАРЕ CDSACD TUNER
Inserting batteries into the
remote 5 & ro} =
2CH AFD. МОМЕ MUSIC
Insert R6 (size-AA) batteries with the + and — em C22. =
properly oriented in the battery compartment. CC,
When using the remote, point it at the remote e, m Tue E
sensor E on the receiver. seme ENTER
ED x) CO
H0 >1011
SHIFT DTUNNG DISC АТ
ANT СІҒАН SEARCH MODE
ON
TOP MENU/
GUIDE
ENTER/
EXECUTE
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace all batteries with new ones.
Notes
Do not leave the remote in an extremely hot or
humid place.
Do not use a new battery with an old one.
Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction. The tables below show the settings of each
* If you don't use the remote for an extended period button
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion. Remote Operations Function
Button
1/0 Кесеіуег Turns the receiver оп or off.
SLEEP Receiver Activates the sleep
function and the duration
which the receiver turns
off automatically.
425
ZIPdd-WH 910ueg әці Бш<п виоцеләйо m
Remote Operations Function Remote Operations Function
Button Button
VIDEOI Receiver To watch VCR. SHIFT Receiver Press repeatedly to
(VTR mode 3) select a memory page
VIDEO2 Receiver To watch VCR. for presetting radio
(VTR mode 1) stations or tuning to
т preset stations.
VIDEO3 Receiver To watch VCR. - - -
(VTR mode 2) D.TUNING Receiver Tuner station direct key-
in-mode.
DVD Receiver To watch DVD.
: MUTING Receiver Mutes the sound from
TV/SAT Receiver To watch TV programs ilie receiver:
or satellite receiver.
ж/ж Кесеіуег Select a menu item.
MD/TAPE Receiver To listen to Minidisc or - Я
audio tape. +> Receiver Makes adjustment or
- - change the setting.
CD/SACD Receiver To listen to compact : -
disc. MASTER Receiver Adjusts the master
VOL +/— volume of the receiver.
TUNER Receiver To listen to radio 3 -
programs. MAIN Receiver Press this button
- - MENU repeatedly to select one
PHONO Receiver To listen to turntable. of the four cursor
AUX Receiver То listen to an audio modes: SET UP,
equipment. LEVEL, EQ and
MULTICH Receiver Selects MULTI CH IN CUSTOM;
source. ON Receiver To display the menus
2CH Receiver Selects 2CH mode. SCREEN of the receiver on the
ТУ screen.
A.F.D. Receiver Selects A.F.D. AUTO, І
DOLBY PL. PLII MOV. AV I/O TV/VCR/ Turns the audio and
PLII MUS NEO6 CIN ; СР ріауег/ video components оп or
and NEO6 MUS. VCD player/ off.
- LD player/
MOVIE Receiver Selects C.ST.EX A, DVD player/
C.ST.EX B and MD deck/
CORES: DAT deck
MUSIC Receiver Selects HALL, JAZZ SYSTEM Receiver/ Turns off the receiver
and CONCERT. STANDBY TV/VCR/ and other Sony audio/
TEST Receiver Press to output test tone. (Press Satellite tuner/ video components.
TONE AVI CD player/
І
DIRECT ^ Receiver | Selects 2CH ANALOG and I/O" NCO player
DIRECT. at the LD player/
- same time) DVD player/
AAC Receiver Selects Dual Mono or MD deck/
BI-LING Bilingual sound of DAT deck
Dolby Digital, DTS or
ААС, etc.
SB Receiver Press to select the continued
DECODING surround back decoding
modes.
4305
Remote Button Description Remote ^ Operations Function
(continued) Button
1 —————————— PRESET/ Receiver Scans and selects preset
Remote Operations Function CH/ stations.
Button
D.SKIP +/— TV/VCR/ Selects preset channels.
1-9 and Receiver Use with “SHIFT” button satellite tuner
0/10 to preset radio station or x 5 T
iuni < CD player/ Skips discs (multi-disc
uning to preset stations
and with “D.TUNING” VCD player/ changer only).
for direct tuning. DVD player/
MD deck
CD player/ | Select track numbers. "EE
VCD player/ 0/10 selects track 10. ENTER TV/V CR/ After selecting a
LD player/ satellite tuner/ channel, disc or track
MD deck/ LD player/ using the numeric
DAT deck MD deck/ buttons, press to enter
DAT deck/ the value.
TV/VCR/ Select channel numbers. Tape deck
Satellite tuner = 5
DISC CD player/ Selects a disc directly
210/11 CD player/ | Select track numbers VCD player —(multi-disc changer
VCD player/ over 10. only).
LD player/ F
MD deck/ ANT VCR Selects output signal
T from aerial terminal: TV
ape deck ;
signal or VCR program.
AUDIO TV/VCR/ Changes the sound to 7 2 -
DVD player Multiplex, Bilingual or VCR/ ў Skips tracks.
Multi channel TV Sound. CD player/
VCD player/
SWAP*/ TV Swaps the small and DVD player/
ANGLE large picture. LD player/
DVD player To select viewing angle MD deck/
or changes the angles. DAT deck/
JUMP/ TV Toggles between the Tape deck
TIME previous and the current 4Я4/»»> CDplayer/ Searches tracks
channels. VCD player/ (forward or backward).
CD player/ Shows the time or e RU d
VCD player/ displays the playing time ы.
DVD player of disc, etc. ee
VCR/ Fastforwards or
* Only for Sony TVs with the picture-in-picture РАТ OC, (чей;
function. Tape deck
445
Zh bdd-WH 910ueg әці Бш<п виоцеләйо if
Remote Operations Function Remote Operations Function
Button Button
»- VCR/ Starts play. SEARCH DVD player Select searching mode.
CD player/ MODE Press to select the unit
VCD player/ for search (track,
LD player/ index, etc.)
DVD player/ ТОР MENU/ DVD player Displays DVD title.
MD deck/ GUIDE Р : я
DAT deck/ satellite tuner Displays guide menu.
Tape deck AV MENU VCR/ Displays menu.
и VCR/ Pauses play or record. Satellite tuner/
CD player/ (Also starts recording DVD player
VCD player/ with components іп ce VCD player/ Returns to the previous
LD player/ record standby.) LD player/ menu or exits the
DVD player/ DVD player menu.
MD deck/ 4/4 /«/> VCR/ Selects a menu item.
DAT deck/ Satellite tuner/
Tape deck DVD player
" ad Stops play. ENTER/ — VCR/ Press to enter the
player/ EXECUTE Satellite tuner/ selection.
VCD player/
DVD player
LD player/
DVD player/ ТУ 0 ТУ Turns the TV on or off.
MD deck/ -/-- TV Selects the channel
DAT deck/ entry mode, either one
Tape deck or two digit.
DISPLAY TV/VCR/ Selects information TV VOL TV Adjust the volume of
VCD player/ displayed on the TV H- the TV.
LDphyeur. sereen. TVCH4- TV Select preset TV
DVD player
- channels.
лл er ee ee” Т TV Selects input signal:
piana Ue VIDEO TV input or video
DVD player і
- | input.
Satellite tuner Exits the menu. WIDE TV Selects the wide
SUBTITLE DVD player Changes the subtitles. picture mode.
CLEAR DVD player Press if you made a USE MODE Remote To set up the remote.
ШЕКЕ when you press АУ1 and Remote Select the command
the number button or
AV2 mode of the remote.
press to return to the
continuous play etc. SOURCE Remote Selects 2ND AV
output.
ALT Remote Change remote key
function to activate
those buttons with
orange printing.
continued
4505
Remote Button Description
(continued)
Notes
* Some functions explained in this section may not
work depending on the model of the receiver.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
To activate the buttons with orange printing, press
ALT first before pressing the buttons.
Press MAIN MENU on the remote before you use
the +/#/#/» buttons for receiver operation.
Press TOP MENU/GUIDE or AV MENU on the
remote before you use the remote to control the
satellite tuner, VCR and DVD player.
The TV/SAT, PHONO, SOURCE, DIRECT, AAC
BI-LING, 12 and ON SCREEN functions are not
available for set operation.
Selecting the command
mode of the remote
Set the remote command mode using the USE
MODE button and the remote command mode
buttons.
Selecting the command mode
You can switch the command mode (AV1 or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.
Press AV1 or AV2 while pressing down
USE MODE.
The indicator lights once (twice for AV2) , then
the command mode switches.
To check the command mode of the
remote
Press USE MODE. You can check the remote
by the indicator.
Mode Indicator lights
AVI once
AV2 twice
46.5
To reset the remote to factory
settings
Press 1/(!), AV 1/©), and MASTER VOL - at
the same time.
The indicator lights 3 times, then goes off.
Programming the remote
You can program the remote to control non-
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your
system.
Furthermore, you can also program the remote
for Sony components that the remote is unable
to control. Note that the remote can only
control components that accept infrared
wireless control signals.
1 Press AV 1/©) while pressing down USE
MODE.
The indicator lights.
2 Press the input selector button
(including TV 1/©)) for the component
you want to control.
For example, if you are going to control a
CD player, press CD/SACD.
З Press the numeric buttons to enter the
numeric code (or one of the codes if
more than one code exists)
corresponding to the component and
the maker of the component you want
to control.
See the tables on pages 47—49 for
information on the numeric code(s)
corresponding to the component and the
maker of the component (the first digit and
the last two digits of the numeric code
correspond to the category and the maker's
code respectively.)
4 Press ENTER.
Once the numeric code has been verified,
the indicator slowly flashes twice and the
remote automatically exits the programming
mode.
5 Repeat steps 1 to 4 to control other
components.
To cancel programming
Press USE MODE during any step. The remote
automatically exits the programming mode.
To activate the input source after
programming
Press the programmed button to activate the
input source you want.
If programming is unsuccessful,
check the following:
* If the indicator does not light up in step 1, the
batteries are weak. Replace both batteries.
* If the indicator flashes 4 times in quick succession
while entering the numeric code, an error has
occurred. Start again from step 1.
Notes
* The indicator turns off while a valid button is
pressed.
* [n step 2, if several input selector buttons are
pressed, only the last pressed button is valid.
* In step 2, if you press TV VO, only TV VOL +/—,
TV СН +/-, TV/VIDEO and WIDE buttons are
reprogrammed.
* In step 3, if an input selector button is pressed, the
new input source is selected and the programming
procedure returns to the beginning of step 3.
* For the numeric codes, only the first three numbers
entered are valid.
To clear the memory of the remote
To clear all programmed and learned signals,
do the following to reset the remote to factory
settings.
Press 1/05, AV 1/(!) and MASTER VOL - at
the same time.
The indicator flashes 3 times, then goes off.
The numeric codes corresponding to
the component and the maker of the
component
Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than
one numeric code may be assigned to a
component. If you fail to program your remote
using one of the codes, try using other codes.
Notes
* The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.
АП of the input selectors on this remote may not be
available when used with your particular
component.
To control a CD player
Maker Code(s)
SONY 101, 102, 103
DENON 04, 123
JVC 05, 106, 107
KENWOOD 08, 109, 110
MAGNAVOX 11, 116
MARANTZ 16
ONKYO 12, 113, 114
PANASONIC 15
PHILIPS 16
PIONEER 17
TECHNICS 115, 118, 119
YAMAHA 20, 121, 122
continued
Zh bdd-WH 910ueg әці Бш<п ѕиоцеләао if
4755
Programming the remote (continued)
To control a VCR
Maker Code(s)
To control a DAT deck SONY 701, 702, 703, 704, 705,
706
Maker Code(s) AIWA 710, 750, 757, 758
SONY 203
AKAI 707, 708, 709, 759
PIONEER 21
а BLAUPUNKT 740
EMERSON 711, 712, 713, 714, 715,
To control an MD deck 716, 750
Maker Code(s) FISHER 717, 718, 719, 720
SONY 301 GENERAL ELECTRIC 721, 722, 730
DENON 302 GOLDSTAR 723,753
ІҮС 303 GRUNDIG 724
KENWOOD 304 HITACHI 722, 725, 729, 741
ITT/NOKIA 717
To control a tape deck ТУС 726, 727, 728, 736
Maker Code(s) MAGNAVOX 730, 731, 738
SONG AUS MITSUBISHI/MGA 732, 733, 734, 735
DENON 204, 205 NEC 736
RENWOOD ЗЕ 20k HOD PANASONIC 729, 730, 737, 738, 739,
калы акті 740
МАКАМІСНІ 210
PHILIPS 729, 730, 731
PANASONIC 216
PIONEER 729
PHILIPS 211, 212
RCA/PROSCAN 722, 729, 730, 731, 741,
PIONEER 213, 214 747
TECHNICS 215, 216 SAMSUNG 742, 743, 744, 745
YAMAHA 217, 218 SANYO 717, 720, 746
SHARP 748, 749
To control an LD player TELEFUNKEN 751, 752
Maker Code(s) TOSHIBA 741,155, 156
SONY 601, 602, 603 ZENITH 754
PIONEER 606
To control a DVD player
To control a video CD player Maker Code(s)
Maker Code(s) SONY 401, 402, 403
SONY 605 PANASONIC 406, 408
PHILIPS 407
PIONEER 409
TOSHIBA 404
DENON 405
48%
To control а TV
Maker Code(s)
SONY 501, 502
DAEWOO 504, 505, 506, 507, 515,
544
FISHER 508
GOLDSTAR 503, 511, 512, 515, 534,
544
GRUNDIG 517, 534
HITACHI 513, 514, 515, 544
ITT/NOKIA 521, 522
JVC 516
MAGNAVOX 503, 518, 544
MITSUBISHI/MGA 503, 519, 544
NEC 503, 520, 544
PANASONIC 509, 524
PHILIPS 515, 518
PIONEER 509, 525, 526, 540
RCA/PROSCAN 510, 527, 528, 529, 544
SAMSUNG 503, 515, 531, 532, 533,
534, 544
SANYO 508, 545, 546, 547
SHARP 535
TELEFUNKEN 523, 536, 537, 538
THOMSON 530, 537, 539
TOSHIBA 535, 540, 541
ZENITH 542, 543
To control a satellite tuner or cable
box
Maker Code(s)
SONY 801, 802, 803, 804
JERROLD/G.I. 806, 807, 808, 809, 810,
811, 812, 813, 814
PANASONIC 818
RCA 805, 819
S. ATLANTA 815, 816, 817
To control a tuner
Maker Code(s)
SONY 002, 003, 004, 005
Zkbdd-WH әзошәң әці Бш<п виоцеләйо А
49%
Additional Information
Precautions
On safety
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
On power sources
* Before operating the unit, check that the operating
voltage is identical with your local power supply.
The operating voltage is indicated on the nameplate
at the rear of the receiver.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the receiver itself has been turned off.
If you are not going to use the receiver for a long
time, be sure to disconnect the receiver from the
wall outlet. To disconnect the AC power cord, grasp
the plug itself; never pull the cord.
One blade of the plug is wider than the other for the
purpose of safety and will fit into the wall outlet
only one way. If you are unable to insert the plug
fully into the outlet, contact your dealer.
* AC power cord must be changed only at the
qualified service shop.
On heat buildup
Although the unit heats up during operation, this is
not a malfunction. If you continuously use this unit at
а large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
On placement
* Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
Use caution when placing the unit on surfaces that
have been specially treated (with wax, oil, polish,
etc.) as staining or discoloration of the surface may
result.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
50^5
If you have any question or problem concerning your
receiver, please consult your nearest Sony dealer.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem. Also, see *Checking the connections"
on page 22 to verify that the connections are
correct.
There is no sound or only a very low-level sound
no matter which component is selected.
* Check that the speakers and components are
connected securely and correctly.
Check that both the receiver and all the
components are turned on.
Check that the MASTER VOLUME control is
not set at “VOL MIN”.
Check that the SPEAKERS (OFF/A/B/A+B)
button is not set to off and is set accordingly to
your SPEAKERS FRONT system (page 24).
Press MUTING on the remote to cancel the
muting function.
Check that the headphones are not connected.
The protective device on the receiver has been
activated because of a short circuit (“РКОТЕСТ”
flashes). Turn off the receiver, eliminate the
short-circuit problem and turn on the power
again.
There is no sound from a specific component.
* Check that the component is connected correctly
to the audio input jacks for that component.
* Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
* Check that you have selected the correct
component on the receiver.
There is no sound from one of the front
speakers.
Connect a pair of headphones to the PHONES jack
to verify that sound is output from the headphones
(page 24).
If only one channel is output from the headphones,
the component may not be connected to the
receiver correctly. Check that all the cords are fully
inserted into the jacks on both the receiver and the
component.
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection of the
front speaker which is not outputting any sound.
The left and right sounds are unbalanced or
reversed.
* Check that the speakers and components are
connected correctly and securely.
* Adjust balance parameters in the LEVEL menu.
There is severe hum or noise.
* Check that the speakers and components are
connected securely.
* Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
* Move your TV away from the audio components.
* The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
There is no sound or only a very low-level sound
is heard from the center or/and surround
Speakers.
* Make sure the sound field function is on (press
MOVIE or MUSIC).
* Select a sound field containing the word
“C.ST.EX” (pages 26-27).
* Adjust the speaker level (page 22).
* Make sure the center or/and surround speaker
size parameter is set to either "SMALL" or
"LARGE" (page 19).
There is no sound from the active sub woofer.
* Check that the sub woofer is connected correctly
and securely.
* Make sure the sub woofer selection parameter is
set to “YES” (page 18).
* There is no sound output from the SUB
WOOFER terminal depending on the sound field
(page 58).
The surround effect cannot be obtained.
Make sure the sound field function is on (press
MOVIE or MUSIC).
Dolby Digital or DTS multi channel sound is not
reproduced.
* Check that the playing DVD, etc. is recorded in
Dolby Digital or DTS format.
* When connecting the DVD player, etc. to the
digital input jacks of this receiver, check the
audio setting (settings for the audio output) of the
connected component.
Recording cannot be done.
* Check that the components are connected
correctly.
Select the source component with input selector
buttons.
Make sure that INPUT MODE is set to
“ANALOG” before recording from a digital
component connected to the analog MD/TAPE
terminals.
Make sure that INPUT MODE is set to “COAX
IN" or “ОРТ IN" (page 23) before recording
from a digital component connected to the
DIGITAL MD/TAPE OUT terminals.
continued
uoneunoju| jeuonippy
51
Troubleshooting (continued)
The FM reception is poor.
Use а 75-ohm coaxial cable (not supplied) to
connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the ground
wire to a gas pipe.
Receiver
ANTENNA
Outdoor FM antenna
Ground wire
(not supplied)
To ground
Radio stations cannot be tuned in.
* Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
* The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
* Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning).
* No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations
(page 35).
* Press DISPLAY so that the frequency appears in
the display.
5205
There is no picture ог an unclear picture appears
on the TV screen or monitor.
* Select the appropriate input selector on the
receiver.
* Set your TV to the appropriate input mode.
* Move your TV away from the audio components.
The remote does not function.
* The TV/SAT, PHONO, SOURCE, DIRECT,
ААС BI-LING, 12 and ON SCREEN buttons on
the remote are not available.
Check that the command mode of the remote
corresponds to that of the receiver. If the
command mode of the receiver and the remote is
different, you cannot use the remote to operate
the receiver (pages 39 and 46).
Press MAIN MENU on the remote before you
use the 4/*/ €/»* buttons for receiver operation.
To activate the buttons with orange printing,
press ALT first before pressing the buttons.
Point the remote at the remote sensor ІН on the
receiver.
Remove any obstacles in the path between the
remote and the receiver.
Replace both batteries in the remote with new
ones, if they are weak.
Make sure you select the correct input selector
on the remote.
If the remote is set to operate the TV only, use
the remote to select a source or component other
than TV before operating the receiver or other
component.
If you are unable to remedy the
problem using the troubleshooting
guide
Clearing the receiver's memory may remedy
the problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all
settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Clearing the receiver's memory
To clear See
АП memorized settings page 17
Customized sound fields page 33
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 — 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz — 20 kHz, THD 0.09 %)
90 W + 90 W
Reference Power Output
(8 ohms 20 Hz — 20 kHz, THD 0.09 %)
FRONT?: 90 W/ch
CENTER": 90W
SURR”: 90 W/ch
SURR BACK": 90W
(8 ohms 1 kHz, THD 0.7 96)
FRONT?: 100 W/ch
CENTER": 100W
SURR”: 100 W/ch
SURR BACK?: 100 W
1) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
MULTI CHIN, 10 Hz - 70 kHz
CD/SACD, AUX, +0.5/—2 dB (with sound
MD/TAPE, DVD, field and equalizer
VIDEO 1,2,3 bypassed)
Inputs (Analog)
MULTI CH IN, Sensitivity: 500 mV
CD/SACD, AUX, Impedance: 50 kilohms
MD/TAPE, DVD, S/N?: 96 dB
VIDEO 1,2,3 (A, 500 mV?)
2) INPUT SHORT (with sound field and equalizer
bypassed).
3) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: —
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
VIDEO 2, CD/SACD,
Sensitivity: —
MD/TAPE (Optical) Impedance: —
S/N: 100 dB
(A, 20 kHz LPF) Emm
>
Outputs (Analog) о.
MD/TAPE (OUT), Voltage: 500 mV 8;
VIDEO 1 (AUDIO OUT) Impedance: 10 kilohms o
3
SUB WOOFER Voltage: 2 V D
Impedance: 1 kilohms 5
=h
2
Outputs (Digital) 3
MD/TAPE (Optical) Sensitivity: — 5
О
3
EQ
Gain levels: +10 dB, 0.5 dB step
continued
5395
Specifications (continued)
FM tuner section
Tuning range
Antenna terminals
87.5 - 108.0 MHz
75 ohms, unbalanced
Intermediate frequency
Sensitivity
Mono:
Stereo:
Usable sensitivity
S/N
Mono:
Stereo:
10.7 MHz
18.3 dBf, 2.2 nV/75 ohms
38.3 dBf, 22.5 pV/75 ohms
11.2 dBf, 1 pV/75 ohms
76 dB
70 dB
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response
Selectivity
54%
0.3%
0.5%
45 dB at 1 kHz
30 Hz - 15 kHz,
*0.5/-2 dB
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale: 530 — 1710 kHz?
With 9-kHz tuning scale: 531 – 1710 kHz?
Antenna Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
4) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press 1/@). АП preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y: 1 Vp-p, 75 ohms
Рв/В-Ү:
0.7 Vp-p, 75 ohms
Pr/R-Y: 0.7 Vp-p, 75 ohms
Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Component Video:
Y: 1 Vp-p, 75 ohms
Рв/В-Ү:
0.7 Vp-p, 75 ohms
Pr/R-Y: 0.7 Vp-p, 75 ohms
General
Power requirements
Area code Power requirements
U, CA 120 V AC, 60 Hz
Power consumption
Area code Power consumption
U 245 W
CA 330 VA
Power consumption (during standby mode)
0.3 W (when “P.SAVE” in the CUSTOM menu is set
to “ОМ”) (page 39).
AC outlets 1 switched,
120 W/1A MAX
430 x 157.5 x 310 mm
(16 7/8 x 6 2/8 x 12 2/8
inches) including
projecting parts and
controls
Dimensions
Mass (Approx.) 8.0 kg (17 Ib 11 oz)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander (1)
R6 (size-AA) batteries (2)
For details on the area code of the component you
are using, see page 4.
Design and specifications are subject to change
without notice.
uoneunuoju| jeuonippy
5545
Tables of settings using the MAIN MENU button
You can make various settings using the MAIN MENU, < / > buttons and jog dial. The tables
below show each of the settings that these buttons can make.
Press MAIN MENU Press < or > to select Turn jog dial to select Page
repeatedly to select
<LEVEL> ТЕР ТЕЁ BAL. L/R XX L +8 to R +8 (1 steps) 32
CTR XXX.X dB -10 dB to +10 dB (0.5 dB steps)
SUR.L.XXX.X dB -10 dB to +10 dB (0.5 dB steps)
SUR.R.XXX.X dB -10 dB to +10 dB (0.5 dB steps)
SB XXX.X dB -10 dB to +10 dB (0.5 dB steps)
S.W. XXX.X dB -10 dB to +10 dB (0.5 dB steps)
Jp. RANGE: COMP. XXX OFF, STD, MAX
EFCT. XXX depends on the sound field
(MIN, STD, MAX)
«EQ» BASS XXX.X dB -10 dB to +10 dB (0.5 dB steps) 33
TREB. XXX.X dB -10 dB to +10 dB (0.5 dB steps)
EQ XXX ON, OFF
«SETUP» 161; (SUB WOOFER) S.W. XXX YES, NO 18
ТЕР ТЕЁ (FRONT) XXXXX LARGE, SMALL
{©} (CENTER) XXXXX LARGE, SMALL, NO
{SUE ISA; (SURROUND) XXXXX LARGE, SMALL, NO
188: (SURR BACK) ХХХ YES, NO
1 ir 1 н - DIST. XX ft. between 3 ft. and 23 ft. (1 foot steps)
Дер DIST. XX ft. between ЕР TBI DIST. and 5 ft.
(1 foot steps)
деу; SRE DIST. XX ft. between ТЕР TRI DIST. and 15 ft.
(1 foot steps)
168; DIST. XX ft. between ТЕР ТЕР DIST. and 15 ft.
(1 foot steps)
{SUL ЗА; XXXXXXX SIDE/LO, SIDE/HI, BEHD/LO, BEHD/HI
<CUSTOM> SB XXXX MTRX, AUTO, OFF 39
DEC. XXXX AUTO, PCM
P.SAVE.XXX ON, OFF
564
Adjustable parameters for each sound field
The adjusted BASS and TREB. parameters are applied to all sound fields.
< EQ >
BASS TREB. EQ ON/OFF
2CH ST. ө ө ө
A.F.D. AUTO ө ө ө
DOLBY PL ө ө ө
РІЛ MOV ө ө ө
PLII MUS ө ө ө
NEO6 CIN
NEO6 MUS
C.ST.EX A ө ө ө
C.ST.EX B ө e e
C.ST.EX C e e ө
НАШ, ө ө ө
1А77. ө ө ө
CONCERT ө ө ө
MULTI CH IN
HP 2CH ө ө ө
HP MULTI =
о.
HP THEA ө ө ө =
PCM 96K S
E
continued 5
5
3
D
=
o
з
57 US
Adjustable parameters for each sound field (continued)
The adjusted LEVEL parameters are applied to all the sound fields except for EFCT. parameter. For
EFCT. parameter, the settings are stored individually for each sound field.
< LEVEL >
FRONT CENTER SUR.L. SUR.R. SURRBACK S.W. D.RANGE ЕЕСТ.
BAL LEVEL LEVEL LEVEL LEVEL LEVEL COMP” LEVEL
2CH ST.
A.F.D. AUTO
DOLBY PL
PLII MOV
PLII MUS
E
NEO6 CIN
NEO6 MUS
C.ST.EX A
C.ST.EX B
C.ST.EX C
2)
HALL
2)
JAZZ
2)
CONCERT
E
MULTI CH IN
HP 2CH
HP MULTI
HP THEA
PCM 96K
D These parameters may not operate depending on the source or adjustments. For details, see each item in
“Adjusting the level parameters" (page 32).
2 When these sound fields are selected, there is no sound output from the sub woofer if the front speaker size is set
to "LARGE". However, sound will be output from the sub woofer if the digital input signal contains LFE
signals.
5805
Sony Corporation Printed in Malaysia http://www.sony.net/