Searching 6117 models from Printables and open-source repos — drones, robot arms, walkers, humanoids, and the cases & mounts for the Raspberry Pi / Arduino Nano / Jetson boards that run them.
48 of 1981 results in 📦 Cases & Mounts
I am someone that continually is moving my camera depending on what I am printing.
Please note: This is an adapted version of my Raspberry Pi 3 case (https://www.prusaprinters.org/prints/4038-malolos-…
This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns.
This is a case for Raspberry Pi 5 with some nice features. You can choose between different covers.
Retro Desktop PC case based on an old 286 desktop PC I grew up with. Boots via SD card in the 5.25 drive.
Modular Enclosure for Pi 5
A snap fit Raspberry Pi 5 Case specifically made for use with the active cooler.
Slim Raspberry Pi Zero W case, with / without screws, no pin header.
Fractal Baby north-is
ESP32 Wroom-32 Case include lids for bluetooth, wifi, ESPresence and WLED
The case for ESP32 Camera in two versions.
This is a two part, slim Arduino Uno case.
Modular Enclosure for Pi Zero 2 W
Snap-Together case for ESP32-CAM with the lower (USB, Power) board.
This is a remix of Arduino Case by 3DP
Pi case that i made in my free time :-)
OpenSCAD sedigned case for the esp32 development board. Thanks to Sergio Vilches for the rounded corners!
Retro Desktop PC case based on an old 286 desktop PC I grew up with.
This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 Features Internal fan mount (40mm x 40mm x10) Thread inserts…
Case for ESP32 cam which is supposed to be nice to look at
A case for a Raspberry Pi 4 Cluster
Modular open-source case for Raspberry Pi-based MANET radios by Parallel × MorosX.
A remixed camera housing for Sneaks’ brilliant Raspberry Pi Camera mount to accommodate the new RasPi Camera 3.
Low profile raspberry pi camera mount for the voron 0 / voron 0.1 (no support)
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case.
A friction-fit case for the ESP32 D1 Mini featuring 7 different styles/designs
I designed this Pi 5 case, following my Pi 4 case. The top and middle frame are unchanged. (about 4-5h print)
Script for the Argon ONE Raspberry Pi Cases
The tiny Pi5 case from Computex 2024 you all wanted to have...
Simple case for the Raspberry Pi Zero 2 W that prints flat and folds up with living hinges and is secured with end caps.
Simple Raspberry Pi Zero case
A case for a raspberry pi 5 with active cooler
Modular Enclosure for Pi 4
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ...
Print a case for your new Raspberry Pi 5!
Very simple slide-fit box for esp32-devkit boards
A retro TV case for Raspberry Pi based on a Toshiba Blackstripe. Includes a "no-signal" splashscreen for RetroPie.
Snap-fit back for Marius' pi zero 2 slim case
A case for the ESP32 WROOM 32D
An RPi case that attaches seamlessly to your MINI at the z-axis base and replaces the lid of the stock electronics box
A simple case for using an LD2410C radar sensors with an ESP32-C3 SuperMini. Includes multiple backs for mounting.
A fully modular Raspberry Pi server rack.
RPI Pi Zero case that looks like a normal PC but smaller. There are a LOT of variants of this case.
A simple case for the different variants of the ESP32 Super Mini boards.
A normalized set of articulating arm links and all combinations: ff, fm, mm (standard and 90° rotation).
A simple box for your small boards.
Simple Raspberry PI 2 (W) case.