Document text
AM/FM SELECT
SETTING THE CLOCK
A/C CONTRO
Press to manually enable or disable the air
conditioning in all modes except defrost.
RECIRCULATION CONTROL
Press to recirculate interior air within the cabin. This
provides maximum cooling efficiency, particularly in
extremely hot and humid weather, and also helps to
reduce dust and undesired outside odors from
reaching the interior of your vehicle. Press the
recirculation button again to allow fresh, outside air
to enter the cabin. Recirculation mode should not
be used without the A/C on in order to reduce
excess humidity build-up inside the vehicle.
MANUAL OVERRIDE CONTROLS
When pressed, these four controls will override
automatic operation. All controls allow you to
determine where airflow is directed. To return to
automatic operation, press AUTO.
EMPERATURE SELECTION
To control the temperature, select the desired
temperature by pressing the temperature controls.
01
In radio mode, press to select the AM/FM1/FM2
frequency bands.
SETTING THE CLOCK
Press and hold the H control to set the hour.
Press and hold the M control to set the minute.
VOLUME/POWER CONTROL
02
Press the control to turn the audio system on or
off. Turn the control to raise or lower the volume.
07
To begin CD play while in radio mode, press the
CD control.
REAR WINDOW DEFROSTER
SEEK FUNCTION
In radio mode, press to find the next listenable
station up or down the band. In CD mode, press
to move to the next/previous selection on the CD.
EJECT
Press to eject a CD.
UNE ADJUS
In radio mode, press to move to the next
frequency up or down the band.
08 2
Press to bring soft and loud passages together
for a more consistent listening level.
SHUFFLE
Press to play CD tracks in random order.
1( B
In radio mode, press to hear a sampling of all
listenable stations. In CD mode, press to hear
a brief sampling of all selections.
VOLUME/POWER CONTROL
Press the control to turn the audio system on or
off. Turn the control to raise or lower the volume.
07
To begin tape play while in radio mode, press the
tape control.
SEEK FUNCTION
In radio mode, press to find the next listenable sta¬
tion up or down the band. In tape mode, press to
move to the next/previous selection on the tape.
DOLBY® NOISE REDUCTION
Press to activate the system, which reduces tape
noise and hiss while playing a tape. Press again
to deactivate.
AUTOMATIC OPERATION
In this mode, the system will automatically deter¬
mine fan speed and airflow location to achieve
the temperature selected. Press AUTO to engage
the automatic temperature control.
ROADSIDE ASSISTANCE
0||CT
Press to change tape direction.
UNE ADJUST
05
In radio mode, press to move to the next
frequency up or down the band. In CD changer
mode (if equipped), press to select a disc in
the changer.
LULL
09
In radio mode, press to hear a sampling of all
listenable stations. In tape mode, press to hear
a brief sampling of all selections.
SETTING THE MEMORY PRESETS
Select AM, FMi, or FM2 band, then select a sta¬
tion. Next, press and hold a numbered preset
control until the sound returns.
A BMf! ► |
* + i
I 4 HI *1
4 till w 1
FRONT WINDOW DEFROSTER
>« > 1
WJl
p. th' r#.
AUTOMATIC CLIMATE CONTROL ifequippedj
AM/FM STEREO CASSETTE F equipped)
To fully assist if you should have a vehicle concern, Ford Motor Company offers a complimentary roadside
assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available:
24 hours, 7 days a week for the New Vehicle Limited Warranty period of three years or 36,000 miles, whichever
comes first. Roadside assistance will cover:
Changing a flat tire Jump-starts Limited fuel delivery Lock-out assistance Towing of your vehicle
This Quick Reference Guide is not intended to replace your vehicle’s Owner’s
Guide, which contains more detailed information concerning the features of your
vehicle and important safety warnings to help reduce the risk of injury to you and
your occupants. Always read your entire Owner’s Guide carefully when first learning
about your vehicle and consult the appropriate section when questions arise.
Ford Motor Company September 2003
Customer Relationship Center Second Printing
P.O. Box 6248 Quick Reference
Dearborn, Michigan 48121
(800) 392-3673 Ford Taurus
Litho in U.S.A.
For information on other available audio systems or the CD changer system, please refer
to your Owner’s Guide.
In radio mode, press to select the AM/FM1/FM2
frequency bands.
Press and hold the H control to set the hour.
Press and hold the M control to set the minute.
Press to clear the rear window of ice or fog. Press
the control again to turn off the defroster. The
defroster turns off automatically after 10 minutes
or when the ignition is turned to the OFF position.
Activating the rear window defroster will also
activate the heated mirrors (if equipped).
03
To adjust manually, use the control to raise or
lower the fan speed.
Distributes outside air through the windshield
defroster ducts. Can be used to clear ice or fog
from the windshield.
4F1J-19G217-AA
REAR WINDOW WIPER & WASHER (Wagon only)
ROADSIDE ASSISTANCE CENTERS
United States: (800) 241-3673 Canada: (800) 665-2006
For complete details on any roadside assistance concern, see the Roadside Emergencies section or the
Customer Assistance section in your Owner’s Guide.
The rear wiper and washer control is located under the headlamp controls. Press
the wiper control to activate the rear wiper. Press again to turn off the wiper. Press
the washer control to activate the rear washer.
ESSENTIAL INFORMATION
MESSAGE CENTER
02
This feature shows the following control displays:
Odometer Distance to Empty Average Fuel Economy
Trip Odometer Trip Elapsed Drive Time Compass (if
equipped) Outside air temperature (if equipped)
For a more detailed description of the INFO controls,
please refer to your Owner's Guide.
RESET BUTTON
Press this control to select and reset functions shown in
the INFO menu and SETUP menu.
Fora more detailed description of the RESET control,
please refer to your Owner's Guide.
With the ignition in the ON position, the message
center, located on your instrument cluster, displays
important vehicle information through a constant
monitor of vehicle systems. You may select display
features on the message center for a display of status
preceded by a brief indicator chime. The system will
also notify you of potential vehicle problems with a
display of system warning followed by a long indicator
Setup menu controls the following displays:
Language Units (English Metric) System Check
For a more detailed description of the Setup menu,
please refer to your Owner's Guide.
SYSTEM WARNINGS
System warnings alert you to possible problems or
malfunctions in your vehicle operating systems.
In the event of a multiple warning situation, the message
center will cycle the display to show all warnings by
displaying each one for several seconds.
The message center will display the last selected feature
if there are no more warning messages. This allows you
to use the full functionality of the message center after
you acknowledge the warning by pressing the RESET
control and clearing the warning message.
If any warning stays on or continues to come on, contact
your dealer as soon as possible. For a more detailed
description of system warnings please refer to your
Owner’s Guide.
COMPASS (If Equipped)
The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broad¬
cast antennas. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy.
Usually, when something affects the compass readings, the compass will correct itself after a few days of operating
your vehicle in normal conditions. If the compass still appears to be inaccurate, a manual calibration my be neces¬
sary. Refer to Compass zone/calibration adjustment in the Driver Controls chapter of your Owner’s Guide.
04 TAURUS
QUICK REFERENCE GUIDE
INTERIOR FEATURES
04 TAURUS
QUICK REFERENCE GUIDE
From the advanced Personal Safety System
to the bountiful amenities, every Taurus is
HEADLAMP AND PANEL DIMMER CONT
Rotate clockwise to the first position to turn on the parking lamps,
instrument panel lamps, license plate lamps and tail lamps. Rotate
to the second position to also turn on the low beam headlamps. Rotate
counterclockwise to activate autolamp (if equipped), which provides
light-sensitive automatic on-off control of the exterior lights and keeps
the lights on for a fixed period of time after the ignition is turned OFF. Use
the panel dimmer control, located to the right of the headlamp
control, to adjust the brightness of the instrument panel during headlamp and parking lamp
operation, and to turn on or off the overhead dome lamp.
TURN SIGNAL, HIGH BEAM & WIPER/WASHER CONTRO
Push down to activate the left turn signal or up to activate the right turn signal.
Pull stalk toward you to briefly flash the high beams. Push stalk away to turn
on the headlamp high beams.
Rotate the end of the control away from you to increase or toward you to
decrease the speed of the wipers. Pushing the end of the stalk briefly causes
a single swipe (no wash). Push and hold to activate the washer.
For extended wiper blade quality, occasional cleaning of the wiper blades is required.
SERVICE ENGINE SOON WARNING LAMP
This lamp momentarily illuminates to ensure the system is functional. If the
light comes on after the engine is started, refer to your Owner’s Guide. To help
prevent activation, always secure your fuel cap by turning it clockwise until you
hear three clicks.
equipped to provide you with safety, comfort, and enjoyment on the road. In order to help
you fully appreciate the countless features of your new Taurus, we invite you to explore this
easy-to-use Quick Reference Guide. Using the image of the instrument panel located in the
center of the guide, locate the feature you would like to learn more about. Each numbered
feature is briefly described to the left of the instrument panel image. For more information,
POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)
Press and hold the rocker control to adjust the accelerator and brake pedals
toward you or away from you. Adjust the pedals only when the vehicle is
stopped and the gearshift lever is in the P (Park) position. The adjustment
allows for approximately three inches of maximum travel.
HAZARD FLASHER CONTROL
please consult your Owner’s Guide.
06
ABS WARNING LAMP (IF EQUIPPED)
; lamp illuminates briefly when the ignition is turned to the ON position.
If the lamp stays on, does not illuminate or flashes, after the engine is
started, seek service immediately. In an emergency, apply continuous force on
the brake pedal to prevent wheel lock when braking on slippery surfaces - do
not pump your brakes. Note: It is normal to feel a pedal pulsation or hear a
noise when the ABS system is activated.
CHI
TRACTION CONTROL (IF EQUIPPED)
This system helps your vehicle make better use of available traction,
especially on slippery road surfaces. The system defaults to ON,
however, should you become stuck, try switching the traction control system
off. For more information, please consult your Owner’s Guide.
Located above the coin holder on the lower portion of the instrument panel,
the auxiliary power point is an additional power source for electrical
accessories. Improper use of the power outlet can cause damage not covered
by your warranty.
SPEED CONTROL (IF EQUIPPED)
Overdrive 0 is the normal drive position for the best fuel economy. Switch to the
second drive position only when driving with a heavy load, towing a trailer, driving
up or down steep hills, or when additional engine braking is desired. This vehicle is
equipped with a brake-shift interlock feature that prevents the gearshift lever from being
moved from P (Park) when the ignition is in the ON position unless the brake pedal is
depressed. If your vehicle is equipped with a console-mounted gearshift lever, you must
also press the thumb button on the side of the gearshift lever to move the gearshift lever
from P (Park).
0 operate, the speed control must be ON and the vehicle's speed must be at or
above 30 mph. To set a speed, press SET/ACC. To set a higher speed, press
SET/ACC again, and hold until you reach the desired speed. To set a lower
speed, press and hold CST until you reach the desired speed. Pressing RES will
return to a previously set speed. To turn the speed control off, press the OFF
button or depress the brake pedal to disengage.
TRUNK RELEASE (IF EQUIPPED)
Press to release the trunk. The control is located on the instrument panel to
the left of the steering wheel.
12
CHECK FUEL CAP
Illuminates when the fuel cap may not be properly installed. Continued driving with this
light on may cause the “SERVICE ENGINE SOON” warning light to come on. Refer to
Fuel Filler cap in the Maintenance and Specifications chapter of your Owner’s Guide.
Please note that if the fuel cap is not properly installed, “CHECK FUEL CAP”
warning may be displayed in the Message Center.
PASSENGER FRONTAL AIRBAG DEACTIVATION SYSTEM NEW
PA Si
AIK BAG
OFF
The “PASSENGER AIRBAG OFF’ light will be unlit for properly seated adults (airbag on)
or unlit for an empty seat (airbag off). The “PASSENGER AIRBAG OFF” light will be lit
(airbag off) for smaller people and properly restrained child safety seats. Even with an
automatic on/off system, properly restrain children age 12 and under in the rear seat
whenever possible. For additional information on the Passenger Airbag Deactivation
System, refer to the Airbags section in the Seating and Safety Restraints chapter of your Owner’s Guide.
The interior lights will turn on when the remote is used to unlock the doors or sound the
panic alarm. The interior lights will turn off if the ignition switch is turned to the ON position, or after 25
seconds of illumination. The dome lamp control must not be set to the OFF position for the illuminated entry
system to operate. The remote-control entry features only operate with the ignition in the LOCK position.
SECURILOCK™ PASSIVE ANTI-THEFT SYSTEM
The SecuriLock passive anti-theft system is an engine immobilization system.
This system prevents the engine from being started unless a coded key
programmed to your vehicle is used. Please note that for security purposes,
your coded keys cannot be copied. If you would like spare coded keys, they
can be purchased from your dealership.
KEYLESS ENTRY SYSTEM (IF EQUIPPED)
Move the mirror selector control to L to adjust the left mirror, or R to
adjust the right mirror. Next, move the mirror control in the direction you wish
to tilt the mirror. Return the selector control to the center position to lock the
mirrors in place.
this control you can unlock the trunk/liftgate or lock/unlock the doors
without using a key. First, enter your five-digit program code, which will
unlock the driver's door only, and then press the corresponding quick key:
Unlock all doors and the liftgate (wagon only) 3-4
Unlock the trunk or liftgate (wagon only) 5-6
Lock all doors 7-8 and 9-0 simultaneously
Press this control once to unlock the driver’s door. Press again within
3 seconds to unlock all doors and liftgate (wagon only).
Press this control once to lock all doors and liftgate (wagon only).
Pressing the control a second time within 3 seconds will chirp the horn
to confirm that all doors are closed and locked.
Press this control to activate the panic alarm. To deactivate, press the
control again, or turn the ignition to ON.
Press this control to unlatch the trunk or liftgate (wagon only).