Leica GPS1200 System Field Manual

Collection

Survival, Water, Medical Field Manuals

Case

Military Manuals

Download PDF ↗ Live URL (may be dead)

Document text

Leica GPS1200
System
Field Manual

e
Version 5.0
English - when it has to be right euca

Geosystems

Introduction

Purchase

сае

Product
identification

Symbols

Trademarks

Validity of this
manual

Available
documentation

Congratulations on the purchase of a GPS1200 Series instrument.

To use the product in a permitted manner, please refer to the detailed safety direc-
tions in the User Manual.

The type and the serial number of your product are indicated on the type plate.
Enter the type and serial number in your manual and always refer to this information
when you need to contact your agency or Leica Geosystems authorized service
workshop.

Type:

Serial No.:

The symbols used in this manual have the following meanings:

Type Description

cE Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.

* Windows and Windows CE are a registered trademark of Microsoft Corporation
* CompactFlash and CF are trademarks of SanDisk Corporation

* Bluetooth is a registered trademark of Bluetooth SIG, Inc

All other trademarks are the property of their respective owners.

* This manual applies to all GPS1200 instruments. Differences between the
various models are marked and described.

* Тһе RX1200 is available as RX1210 or with touch screen functionality as
RX1210T, RX1250X, RX1250Xc, RX1250T or RX1250Tc. The name RX1210 is
used throughout the manual and may also represent the touch screen models.
Only use the supplied stylus on the screens of the touch screen models.

* This manual covers standard real-time surveying applications. Refer to the
GPS1200 Technical Reference Manual for information about other functionality
available.

Name Description Format

User Manual All instructions required in order to x x
operate the product to a basic level are
contained in the User Manual. Provides
an overview of the product together with
technical data and safety directions.

GPS1200 Introduction

Name Description Format

11%

System Field Manual | Describes the general working of the - x
product in standard use. Intended as a
quick reference field guide.

Application Programs | Describes specific onboard application x x
Field Manual programs in standard use. Intended as a
quick reference field guide. The Road-
Runner application program is described
in a separate manual.

Technical Reference | Overall comprehensive guide to the - x
Manual product and program functions. Included
are detailed descriptions of special soft-
ware/hardware settings and soft-
ware/hardware functions intended for
technical specialists.

Refer to the following resources for all GPS1200 documentation and software:
* . the SmartWorx DVD
* http://www.leica-geosystems.com/downloads

Introduction GPS1200 3

Table of Contents

In this manual Chapter Page
1 User Interface 7
1.1 Keyboard 7

1.2 Screen 9

1.3 Operating Principles 10

1.4 Icons 13

1.5 Symbols 19

2 Equipment Setup 21
2.1 Receiver Ports 21

2.2 Post-Processed Static Reference on Pillar 22

2.3 Real-Time Reference, Single Tripod 23

2.4 Real-Time Reference using SmartAntenna, RX1250 and GHT56 24

2.5 SmartRover - External Radio 25

2.6 Real-Time Rover, Pole and Minipack 26
2.7 Real-Time Rover, All-on-Pole 28

3 Determining Antenna Heights 29
4 Using RX1250 31
4.1 Switching between Leica software and Windows CE desktop 31
4.2 Sleep Mode 32
4.3 Interface Configuration 33
4.3.1 Overview 33

4.3.2 Configuring SmartAntenna Interface 34

4.3.3 Configuring Clip-On Interface 35

5 Receiver Protection with PIN 37
6 Manage... - Getting Started 39
7 Manage...\Jobs 43
7.14 Overview 43

7.2 Creating a New Job/Editing a Job 44

8 Manage...\Data 47
8.1 Overview 47

8.2 Point Management 48
8.2.1 Creating a New Point/Editing a Point 48

8.2.2 Mean Page 52

8.3 Line/Area Management 55
8.3.1 Overview 55

8.3.2 Creating a New Line/Area/Editing a Line/Area 56

8.4 Point Sorting and Filters 59
8.4.1 Sorting and Filters for Points, Lines and Areas 59

8.4.2 Point, Line and Area Code Filter 61

9 Manage...\Codelists 63
9.1 Creating a New Codelist/Editing a Codelist 63

9.2 Creating a New Code/Editing a Code 64

4 GPS1200 Table of Contents

Table of Contents

10 Linework 67
10.1 Performing Linework 67
10.2 Combining Linework and Coding 70

11 Manage...\Coordinate Systems 73
11.1 Overview 73
11.2 Creating a New Coordinate System/Editing a Coordinate System 74
11.3 Transformations/Ellipsoids/Projections 76

11.3.1 Accessing Transformation/Ellipsoid/Projection Management 76
11.3.2 Creating/Editing a Transformation/Ellipsoid/Projection 77
11.4 Geoid/CSCS Models 79

12 Manage...\Configuration Sets 81
12.1 Overview 81
12.2 Creating a New Configuration Set 82
12.3 Editing a Configuration Set 83

13 Manage...\Antennas 85
13.1 Overview 85
13.2 Creating a New Antenna/Editing an Antenna 86

14 Convert...\Export Data from Job 89
14.1 Overview 89
14.2 Exporting ASCII Data 90

15 Convert.. M mport Data to Job 93
15.1 Overview 93
15.2 Importing ASCII/GSI Data 94
15.3 Importing DXF Data 96

16 Convert... Copy Points Between Jobs 97

17 Config.. Survey Settings... 99
17.1 ID Templates 99

17.1.1 Overview 99

17.1.2 Creating a New ID Template/Editing an ID Template 100
17.2 Display Settings 101
17.3 Coding & Linework 103
17.4 Quality Control Settings 105
17.5 Logging of Raw Obs 106
17.6 Point Occupation Settings 108

18 Config.. Instrument Settings... 113
18.1 Antenna & Antenna Heights 113
18.2 Satellite Settings 114
18.3 Time Zone 116
18.4 Instrument ID 117

19 Config.. General Settings... 119
19.1 Wizard Mode 119
19.2 Hot Keys & User Menu 120
19.3 Units & Formats 121
19.4 Language 124
19.5 Display, Beeps, Text 125
19.6 Start Up & Power Down 127

GPS1200

20 Config... Mnterfaces... - General 129
20.1 Overview 129
20.2 Real-Time 131

20.2.1 Overview 131
20.2.2 Configuration without Real-Time Interface 132
20.2.3 Configuration of a Reference Real-Time Interface 133
20.2.4 Configuration of a Rover Real-Time Interface 138
20.2.5 Configuration of SBAS 143
20.2.6 Configuration of GGA Message Sending for Reference
Network Applications 144
20.3 Hidden Point 146
20.4 SmartAntenna 149
20.5 Internet 151

21 Configuration of Devices 153
21.1 Overview 153
21.2 Accessing CONFIGURE Devices / GPRS Internet Devices 154
21.3 Creating a New Device / Editing a Device 156

22 Config... Mnterfaces... - Controlling Devices 159
22.1 Accessing Config... Mnterfaces... - Controlling Devices 159
22.2 Digital Cellular Phones 160
22.3 Radios 163
22.4 Hidden Point Measurement Devices 164
22.5 GPRS / Internet Devices 165
22.6 Creating a New Station to Dial/Editing a Station to Dial 166
22.7 Creating a New Server to Connect/Editing a Server to Connect 168

23 Tools... 171
23.1 Format Memory Device 171
23.2 Transfer Objects... 172
23.3 Upload System Files... 173
23.4 Calculator and File Viewer 174
23.5 Licence Keys 175

24 STATUS 177
24.1 STATUS: Survey... 177

24.1.1 Satellite Status 177
24.1.2 Real-Time Status 179
24.1.3 Current Position 184
24.1.4 Logging Status 186
24.1.5 Occupation Information Status 189
24.2 STATUS: Battery & Memory 191
24.3 STATUS: System Information 193
24.4 STATUS: Interfaces... 194

25 NTRIP via Internet 195
25.1 Overview 195
25.2 Configuring a Real-Time Rover for Using NTRIP Service 196

25.2.1 Configuring an Access to the Internet 196
25.2.2 Configuring to Connect to a Server 198
25.2.3 Using the NTRIP Service with a Real-Time Rover 200
26 Menu Tree 203
Index 205

GPS1200 Table of Contents

1 User Interface

1.1 Keyboard

Keyboard

Keys

User Interface

Function keys F1-F6

Alpha keys

CAPS

Hot keys F7-F12

SPACE, SHIFT

ENTER

Arrow keys

CE, ESC, USER, PROG
Numeric keys

For RX1250: Windows key symbol. It
is the Microsoft flag logo located
between PROG and ESC.

For the purpose of the illustration, а RX1250 model has been selected which is
representative for all models. Differences to other RX1200 models are outlined.

Key

Function

Function keys
F1-F6

Correspond to the six softkeys that appear on the bottom of the
Screen when the screen is activated.

Hot keys User definable keys to execute chosen commands or access
F7-F12 chosen screens.
Alpha keys To type letters.

Numeric keys

To type numbers.

CAPS

Switches between upper case to lower case letters.

CE * Clears all entry at the beginning of user input.
* Clears the last character during user input.
ESC * Leaves the current menu or dialogue without storing any
changes made.
* Turns receiver off when hold for 2 s in GPS1200 Main
Menu.
PROG (ON) * Ifthe sensor is off: hold for 2 s to turn the sensor on.

* Ifthe sensor is on: press at any time to access XX
Programs to select an application.

GPS1200

Key Function

SHIFT Switches between the first and the second level of function
keys.

SPACE Enters a blank.

USER Calls the user defined menu.

Arrow keys Move the focus on the screen.

ENTER * Selects the highlighted line and leads to the next logical

menu / dialog.
* Starts the edit mode for edit fields.

* Opens a choicelist.

Key combinations Keys Function

PROG plus USER |* For RX1210/RX1250:
Turns instrument off.
SHIFT ^ Pages up.

SHIFT ә Pages down.

SHIFT PROG (#7 )| For RX1250:
Displays either the Windows CE task bar and start menu.

8 GPS1200 User Interface

1.2 Screen

Screen

Elements

User Interface

н : a) Time
b — ierat Е Tu NT: Im LA b) Caption
сї X— 9 c) Title
ge ae B d) Screen area
и L e) Message line
1 Survey 2 Programs.. 3 Manage...
d [zt > f) Icons
& Th s а Esce
4 Convert. 5 Config. 6 Tools. , h) CAPS
(REEEMENMENMENMIEME | D SHIFTicon
j Quick coding icon
GPS12 129 к k) Softkeys
Element Description
Time The current local time is shown.
Caption Shows location either in Main Menu, under PROG key or
USER кеу.
Title Name of the screen is shown.

Screen area

The working area of the screen.

Message line

Messages are shown for 10 s.

Icons Shows current status information of the instrument. Refer to
"1.4 Icons". Can be used with touch screen.

ESC x Can be used with touch screen. Same functionality as the fixed
key ESC. The last operation will be undone.

CAPS The caps mode for upper case letters is active. The caps mode
is activated and deactivated by pressing the CAPS key.

SHIFT icon Shows the status of the SHIFT key; either first or second level

of softkeys is selected. Can be used with touch screen and has
the same functionality as the fixed key SHIFT.

Quick coding icon

Shows the quick coding configuration. Can be used with touch
screen to turn quick coding on and off.

Softkeys

Commands can be executed using F1-F6 keys. The
commands assigned to the softkeys are screen dependent.
Can be used directly with touch screen.

GPS1200 9

1.3 Operating Principles

Keyboard and
touch screen

Turn receiver on

Turn receiver off

Lock/Unlock
keyboard (only
RX1210/RX1210T)

Selecting from a
menu

The user interface is operated either by the keyboard or by the touch screen with
supplied stylus.

The workflow is the same for keyboard and touch screen. The difference is the way
information is selected and entered.

Operation by keyboard

Information is selected and entered using the keys. Refer to "1.1 Keyboard" for a
detailed description of the keys on the keyboard and their function.

Operation by touch screen
Information is selected and entered on the screen using the supplied stylus.

Operation Description

To select an item Tap on the item.

To start the edit mode in | Tap on the input field.
input fields

To highlight an item or Drag the supplied stylus from the left to the right.
parts of it for editing

To accept data entered Tap on the screen outside of the input field.
into an input field and exit
the edit mode

Hold PROG for 2 s.

The receiver can only be turned off in GPS1200 Main Menu.

Press both USER and PROG simultaneously.
OR
Hold ESC for 2 s.

Option | Description

Lock |Tolock the keyboard press and hold SHIFT for 3 s. The message
'Keyboard locked' is momentariliy displayed on the Message Line.

Unlock | To unlock the keyboard press and hold SHIFT for 3 s. The message
‘Keyboard unlocked’ is momentariliy displayed on the Message Line.

Appearance Description
17:28 4 Lt- ВУ To select an item from a menu, do one of the following:
GPS1200 7 L6 Move the focus to the item. ENTER or CONT (F1).
9R
2 Data Type the complete selection number in front of the
3 Codelists item. ENTER or CONT (F1) are not required.

GPS1200 User Interface

Selecting a page

Edit an entire value
in input fields

Edit an individual
character in input
fields

Access special
alphanumeric char-
acters for input

User Interface

Appearance

Description

OR
Tap on the item.

Appearance Description
eS! =| ТО Select a page in a screen, do one of the following:

Units [Anglel Tise
Distance Unit:
Distance Dec :
Angle Unit 1
Angle Dec s au:

Grade Unit

: hiv:
Velocity Unit: Km/h (kmh);

PAGE (F6).

т OR

Tap on the page tab.

Appearance

Description

Survey [Code [Annot Ма
Point ID 1

1. Highlight the field.

2. Type numeric and/or alphanumeric characters to
overwrite.

3. ENTER or tap outside of the field.

Appearance Description
Survey [Code [Annot [Map| A character can be inserted or overwritten. The proce-
Point ID : 110001 i

dure is the same for both cases.

1. Highlight the field.

2. For the keyboard: ENTER. The edit mode is acti-
vated where additional functions like insert and
overwrite are available.

3. For the touch screen: Highlight the characters to
be changed.

4. Type numeric and/or alphanumeric characters.

5. ENTER or tap outside of the field.

Step |Description
1. Highlight the input field.
2. For the keyboard: ENTER.
3. Toggle to the desired special character set by using the up/down arrow

keys.

Press the function

key assigned to the required character group.

Press the function

key with the required character.

character set.

Repeat step 4. and 5. for entering more special characters of the same

T. ENTER

GPS1200

Appearance and
selection from a
choicelist

Choicelists have various appearances.

Closed choicelist

Appearance

Description

Selection

Write Logfile: MER ZT ())
File Name : Cogo. txt)
Format File : COGO. ЕКТ +>

Triangles on the right indi-
cate further available
choices.

Use the arrow keys « р to
toggle through the list or
tap the triangles on the

screen.

ENTER or tap on the field to access the choicelist. Opening a choicelist reveals
either a simple listbox or a comprehensive listbox dialogue.

Simple listbox

Appearance

Description

Selection

Date Format $ 4
Month/Day/Year}
Year /Month/Day|

e Choicelist shows
items to select.

e Asearch field is
shown if necessary.

* Highlight an item and
ENTER.

* То exit without
changes ESC or tap
outside the simple

listbox.
e Ascroll bar is shown if
necessary.
Listbox dialogue
Appearance Description Selection
12:19

rm EN:
mase [+ vine 8 s EJ
Jobs (CF Сага) х|
jane Datel
Default
Jobi
Job?

e Choicelist fills the
whole screen.

* A search field is
shown.

* Ascroll bar is shown if
necessary.

* Тһе functionalities
comprise adding,
editing and deleting of
items.

* Listbox dialogues are
explained in detail at
appropriate places in
the manuals.

* Highlight an item and
CONT (F1) or ENTER.

* To exit without
changes press ESC or
tap m.

GPS1200

User Interface

1.4 Icons

Description

сае

Position of the
icons on the screen

Position status

Number of visible
satellites

User Interface

Icons show the current status information of the receiver.

The icons provide information related to basic receiver functions. The icons that
appear depend upon which GPS1200 receiver is used and the current receiver
configuration.

abcdef ghi a) Position status
[ps Je TE apps [E b) Number of visible satellites
— + M ui c) Contributing satellites
с = d) Real-time device апа real-time
ae pe [Е status, Internet online status
ey ue) e) Position mode
1 Survey 2 Programs.. 3 Manage.. f) Bluetooth
Г? a Ti g) Line/area
— : h) CompactFlash card/internal memory
4 Convert. 5 Config. 6 Tools. А
mss—i i) Battery
ОНГ] |[ [| |_| Nf K j) SHIFT
GPS12 130 k) Quick coding

Displays the status of the current position.
Touch screen: Tapping the icon leads to STATUS Position.

Icon Description

No icon No position available

e
$

viv Phase fixed solution available. The ticks indicate that an ambi-
A guity check is being made.

Autonomous solution available.

Code solution available.

Displays the number of theoretically visible satellites above the configured cut off
angle according to the current almanac.
Touch screen: Tapping the icon leads to STATUS Satellites.

Icon Description
& The number of satellites above the «Cut Off Angle:> config-
8 ured in CONFIGURE Satellite Settings.
ty The number of satellites above the <Cut Off Angle:> config-
80 ured in CONFIGURE Satellite Settings. Receiver is config-

ured to accept an external oscillator input.

GPS1200 13

Contributing satel-

lites

Real-time device

and real-time
status

Displays the number of satellites that are contributing to the currently computed posi-
tion solution.
Touch screen: Tapping the icon leads to STATUS Satellites.

Icon Description
1:8 6-8 When a position status icon is displayed, the number of satel-
D-8 В=2 lites currently used for the position computation are shown.

If no position is currently available but satellites are being

tracked then the L1 and L2 values (GPS only) or the G and R

values (GPS & GLONASS) show how many satellites are

being tracked.

Cg^ Тһе number of contributing satellites can differ from
the number of visible satellites. This may be either
because satellites cannot be viewed or the
observations to these satellites are considered to be
too noisy to be used in the position solution.

6: 5 Cg^ Тһе number of contributing GLONASS satellites

В: 0 could be zero if five or more GPS satellites аге used
for the position computation. The processing algo-
rithm automatically selects the best possible set of
satellite combinations for the position computation.
A position computation with R = 0 is certainly within
the specified reliability.

Displays the real-time device configured to be used and its status.
Touch screen: Tapping the icon leads to STATUS Real-Time Input.

Real-time mode: Reference

An arrow pointing up indicates a reference configuration, it does not indicate if the
device is working. The arrow flashes when a real-time message is sent. When two
real-time devices are configured, then the icon for the real-time 1 device is shown.

Icon Description

RA RA Digital cellular phone connecting
g "B

RA RA Digital cellular phone transmitting

“р СЫ

Radio transmitting

Ша |

RS232 transmitting

€D

3g
Eos

Bluetooth enabled device attached and transmitting. A digital
cellular phone is shown as an example.

GPS1200 User Interface

Internet online
status

Position mode

User Interface

Real-time mode: Rover
An arrow pointing down indicates a rover configuration. The arrow flashes when real-
time messages are received.

Icon Description

чу чу Digital cellular phone connecting
g "B

чу “у Digital cellular phone receiving

"g ^g

Radio receiving

RS232 receiving

Bluetooth enabled device attached and receiving. A digital
cellular phone is shown as an example.

2M Е I2 |?

The Wide Area Augmentation System, European Geosta-
tionary Navigation Overlay Service or MTSAT Satellite-based
Augmentation System is being used.

Icon

Description

Receiver is online in the Internet.

Displays the current position mode depending on the configuration defined.
Symbols are added to the basic position mode icon when raw data logging or logging
of auto points is configured. As soon as this icon becomes visible the receiver is in
a stage where practical operation can commence.

Touch screen: Tapping the icon leads to STATUS Logging.

Icon |Position |Point Raw data | Logging of auto Move
mode occupation | logging points antenna
е. Static Yes No No No
e. Static Yes Yes No No
Moving No No No Yes
ў Moving No Yes No Yes
GPS1200 15

Bluetooth

Line/area

CompactFlash
card/internal
memory

Icon |Position |Point Raw data | Logging of auto Move

mode occupation | logging points antenna
= Moving No Yes By time Yes
#6
АА | Moving No Yes By distance or height | Yes

Moving No Yes By stop & go Yes

The status of each Bluetooth port and any Bluetooth connection is displayed.
Touch screen: Tapping the icon leads to STATUS Bluetooth.

Icon Description

$ RX1250 or TPS instrument with Communication side cover is
Bluetooth capable. In case of a RX1250, Bluetooth is inte-
grated.

= A Bluetooth connection is established and active.

$ Bluetooth connection not established. Bluetooth port 1, 2 and

123 3 are down. Port 2 and 3 are only available on RX1250.

Eat Bluetooth connection established. Bluetooth port 1, 2 and 3

123 are active. Port 2 and 3 are only available on RX1250.

The number of lines and areas currently open in the active job is displayed.
Touch screen: Tapping the icon leads to MANAGE Data: Job Name.

Icon Description
а 4 The number of lines and areas which are currently open in the
$0 active job is shown.

The status of the CompactFlash card and internal memory are displayed. For the
CompactFlash card, the capacity of used space is shown in seven levels. For the
internal memory, the capacity of used memory is shown in nine levels.

Touch screen: Tapping the icon leads to STATUS Memory & Battery, Memory

page.

Icon Description
м?” м” The CompactFlash сага is inserted and can be removed.
pe =
y" The CompactFlash card is inserted and cannot be removed.
ss It is strongly recommended not to remove the CompactFlash

card to avoid loss of data.

GPS1200 User Interface

Battery

SHIFT

Quick coding

User Interface

Icon Description

@ o The internal memory is the active memory device.

No icon The CompactFlash card is the active memory device. No
CompactFlash card inserted.

The status and source of the battery is displayed. The remaining power in the battery
is indicated by six levels.

For GPS1200 receivers: If two internal batteries are inserted, the battery with the
lower voltage is used. If an external power supply is connected and one or two
internal batteries are inserted, then the external power is used.

For GRX1200 Pro/GRX1200 GG Pro receivers: If two external power supplies are
attached, then the system uses the one which is configured as the preferred power
supply.

Touch screen: Tapping the icon leads to STATUS Memory & Battery, Battery
page.

Icon Description

For GPS1200 receivers: One internal battery in battery
compartment A is in use.

For GPS1200 receivers: One internal battery in battery
compartment B is in use.

For GPS1200 receivers: Two internal batteries, one in each
battery compartment A and B. Black indicates the battery
currently in use.

For GPS1200 receivers: External battery attached and in use.

For RX1250: Internal battery is in use.

The status of the SHIFT key is displayed.
Touch screen: Tapping the icon shows additional softkeys.

Icon Description
ft Additional softkeys are available in the currently visible screen.
t The SHIFT key has been pressed.

The quick coding is displayed.
Touch screen: Tapping the icon turns the quick coding on or off.

Icon Description
01 Quick coding is turned on. Quick codes with one digit are used
from the active codelist.

GPS1200 17

Icon Description

01 Quick coding for quick codes with one digit is turned off.

02 Quick coding is turned on. Quick codes with two digits are used
from the active codelist.

02 Quick coding for quick codes with two digits is turned off.

03 Quick coding is turned on. Quick codes with three digits are
used from the active codelist.

03 Quick coding for quick codes with three digits is turned off.

GPS1200 User Interface

1.5 Symbols
Description The symbols provide information regarding settings.
Filter UU
Symbol Description Example
т The filter symbol is shown оп the Point, Line,
Area or Map page if a point, line or area filter is | points v|Li
active.
Attributes Symbol Description Example
8 The attribute symbol is displayed in MANAGE
Codes to indicate codes that have attributes е Е
attached. ine Е
Limits Symbol Description Example
g Indicates a defined limit has been exceeded. For
example, the exceeding of a residual limit in the 0.0512
Determine Coordinate System application -0.005
program.
Largest residual Symbol Description Example
' This symbol is used to indicate the largest residual
in DET C SYS Step 4: Check Residuals. -0.0691
Staked out Symbol Description Example
h This symbol is used in MANAGE Data: Job Name
to indicate points which have been staked out. тз,
Wake-Up Sessions Symbol Description Example
fa This symbol is used in WAKE-UP Wake-Up
Sessions to indicate which wake-up session is
next to be activated. 2 04
User Interface GPS1200 19

GPS1200

User Interface

2 Equipment Setup

2.1 Receiver Ports

Description

Ports at the
receiver front panel

Ports to connect
equipment

Equipment Setup

All receiver ports on the GPS1200 are located on the receiver front panel.

GX1210, GX1220, GX1230, GX1230 GG, GX1200 with PPS/Event option,
GRX1200 Classic and GRX1200 Lite

ao ow

GPS12_001a

a) Port E2: Event input 2, on GX1200 with g) Port ANT: GNSS antenna in.
PPS/Event option
b) Port E1: Event input 1, on GX1200 with h) Battery compartment B, not for

PPS/Event option GRX1200 Pro/GRX1200 GG Pro
c) Battery compartment A i) Port PPS: PPS output, on GX1200
with CompactFlash card compartment with PPS/Event option
d) LED indicators j Port RX: RX1200 in/out or remote

interface in/out. 8 pin LEMO
e) Port P3: Power out, data in/out, or k) Port P2: Power out, data in/out, or
remote interface in/out. 8 pin LEMO remote interface in/out. 8 pin LEMO
f) Port PWR: Power in. 5 pin LEMO l) Port P1: Power out, data in/out, or
remote interface in/out. 8 pin LEMO

Equipment Port
RX1210 without cable Direct clip on the receiver
RX1210 using a cable Port RX
GNSS antenna Port ANT
Radio in a housing, without cable Port P1 or port P3
Radio without housing, using a cable Port P1, port P2 or port P3
Radio in a System 500 housing, using a cable | Port P1, port P2 or port P3
External power Port PWR
GPS1200 21

2.2 Post-Processed Static Reference on Pillar

Use The equipment setup described below is to be used for static operations on fixed
surveying pillars.

Equipment setup

V /

М. S
GPS12_012 —— — a
a) GNSS antenna f) Receiver GX1210/GX1220/
AX1201/AX1202 GG/AT504/AT504 GG GX1230/GX1230 GG
b) Carrier g) Two batteries
c) Tribrach h) 2.8m antenna cable
d) Pillar plate if required i) CompactFlash card

e) RX1210, if required j) Transport container

22 GPS1200 Equipment Setup

2.3 Real-Time Reference, Single Tripod

Use

Equipment setup

Equipment Setup

The equipment setup described below is to be used for real-time reference stations
with normal radio coverage. Raw observation data may also be collected for post-
processing.

SS
a
b
с ~
d
e
f
g =
h
i

j
k
GPS12_016 //
a) Radio antenna i) RX1210, if required
b) Radio antenna arm 15 cm long j Receiver GX1210/GX1220/

GX1230/GX1230 GG
c) GNSS antenna AX1201/AX1202 GG k) Radio in housing

d) Height hook l) Transport container
e) Carrier m) 1.2 m antenna cable to connect
radio housing to radio antenna
f) Tribrach n) Two batteries
g) 1.2m antenna cable to connect о) CompactFlash card
receiver and GNSS antenna
h) Tripod
GPS1200 23

2.4 Real-Time Reference using SmartAntenna, RX1250 and GHT56

Use The equipment setup described below is to be used for real-time reference stations
using SmartAntenna (ATX1230 or ATX1230 GG), RX1250 and GHT56. This setup
is intended for surveys with the need of normal radio coverage. Raw observation
data may also be collected for post-processing.

Equipment setup

i
RX12 28TR

b)
с)
d)
e)
f
9)
n)

SmartAntenna

(ATX1230 or ATX1230 GG)
Battery for SmartAntenna
Height hook

Carrier

Tribrach

Tripod

GHT57

GHT56

Radio housing

Transport container
RX1250

Radio antenna
Battery for RX1250
CompactFlash card
Battery for radio

GPS1200

Equipment Setup

2.5 SmartRover - External Radio

Use The equipment setup described below is to be used for real-time rover using
SmartAntenna, RX1250X, GHT56 and an external radio.

Equipment setup

RX12 31 y

a) SmartAntenna g) Lower half aluminium pole
b) Battery for SmartAntenna h) Radio antenna
c) Upper half aluminium pole with screw і) Battery for RX1250X
or stub
d) Grip for pole j) CompactFlash card
e) GHT56 k) RX1250X
f) Radio in housing l) Battery for radio

Equipment Setup GPS1200

2.6 Real-Time Rover, Pole and Minipack

Use The equipment setup described below is to be used for a real-time rover with
extended periods of use in the field. Raw observation data may also be collected for
post-processing.

Equipment setup

GPS12 018

8)
b)

с)
d)
e)
f
9)

h)
i)

GNSS antenna AX1201/AX1202 GG j)
Upper half aluminium pole with screw k)

or stub

Grip for pole

RX1210

Holder for RX1210 on pole
Lower half aluminium pole
1.2 m antenna cable

1.6 m antenna cable
Radio in housing

1.8 m, RX to GX cable
Receiver GX1210/GX1220/
GX1230/GX1230 GG

Two batteries

CompactFlash card

Radio antenna

Radio antenna arm 3 cm long
1.2 m antenna cable to connect radio
housing and radio antenna
Telescopic rod

Minipack

GPS1200

Equipment Setup

Position of cables
in the minipack

Equipment Setup

GPS12 036

a)
b)
с)

1.6 m antenna cable

1.8 m, RX to GX cable

1.2 mantenna cable to connect radio
housing and radio antenna

GPS1200

2.7 Real-Time Rover, All-on-Pole

Use The equipment setup described below is to be used for a real-time rover with short
periods of use, especially where there are many obstacles such as fences.

Equipment setup

GPS12 019

а) GNSS antenna AX1201/AX1202 GG h) Radio in housing
b) Upper half aluminium pole with screw i) Receiver GX1210/GX1220/

GX1230/GX1230 GG
c) 1.8mantenna cable j Holder for receiver on pole
d) Grip for pole k) RX1210
e) Holder for RX1210 on pole ) 1.0 m RX to GX cable
f) Lower half aluminium pole m) Two batteries

g) Radio antenna n) CompactFlash card

28 GPS1200 Equipment Setup

3 Determining Antenna Heights

Pillar setup a i Y
i T” i
À
275
d
ft Ӯ a) Mechanical reference plane
Л b) Vertical phase centre offset for L1
c) Vertical phase centre offset for L2
d) Vertical height reading
An AX1201/AX1202 GG antenna is
GPS12 031 shown. Vertical offset = 0

Carrier and adapter

dimensions
A ry ry
A
E
Е
Е
Е Е
o Е Е 8
i ~ Е =
S g u
D wo
SE
Y
1 |
E E
E E
о о
8 8
Y Y 220
GPS12 038 GPS12 037

GRT144 carrier with GAD31 screw-to- GRT146 carrier.
stub adapter.

Determining Antenna Heights GPS1200 29

Tripod setup

GPS12 032

а)
b)
c)
d)

Mechanical reference plane
Vertical phase centre offset for L1
Vertical phase centre offset for L2
Vertical offset

For Leica standard antenna plus
accessories: 0.36 m

Vertical height reading

An AX1201/AX1202 GG antenna is
shown.

Pole setup

hr
a

—N T

GPS12_033

a)
b)
c)
d)

Mechanical reference plane

Vertical phase centre offset for L1

Vertical phase centre offset for L2

Vertical height reading:

* For Leica standard pole consisting
of an upper and a lower half:

2.00 m.

* ForLeica standard pole consisting
of an upper and a lower half with an
additional 1.00 m pole section
added: 3.00 m.

* Forthe lower half of the pole alone:
1.00 m.

An AX1201/AX1202 GG antenna is
shown. Vertical offset = 0

30 GPS1200

Determining Antenna Heights

4 Using RX1250

4.1 Switching between Leica software and Windows CE desktop

Graphic

Access Leica soft-
ware

Access Windows
CE desktop

Using RX1250

Тоа

SmartRover

Geosystems

a) Icon to start Leica

| | software

b) Windows CE desktop
c) Task bar

RX12_33 d) Start button

IF THEN

RX1250 is started | the Leica software starts up automatically.

Windows CE double click to display the Leica software.
desktop is active OR

SHIFT PROG («#7 ) to display the Leica software.

Leica software is double click to maximise it.
minimised OR
select SmartRover in the task bar to maximise it.

IF THEN

Leica software is to be minimised SHIFT MINIM (F5) in Main Menu.
Leica software is to be closed SHIFT EXIT (F6) in Main Menu.
Windows CE task bar is to be displayed | SHIFT PROG (s^).

GPS1200 31

4.2 Sleep Mode

Description

Putting RX1250
into sleep mode

In sleep mode, the RX1250 shuts down and reduces power consumption. Rebooting
RX1250 from sleep mode is quicker than a cold start after turning off.

The RX1250 can only be put into sleep mode in the Main Menu screen.

Press SHIFT SLEEP (F3).

GPS1200 Using RX1250

4.3 Interface Configuration

4.3.1 Overview

Description

Using RX1250

The required interface configurations for the RX1250 depend on the type of equip-

ment setup.

Equipment setup

Interface configurations

Refer to
chapter

GHT56

Real-Time Reference using
SmartAntenna, RX1250 and

SmartAntenna interface via
Bluetooth or USB

Clip-on interface for radio or
digital cellular phone in clip-
on-housing

4.3.2

4.3.3

SmartRover - External Radio

SmartAntenna interface via
Bluetooth or USB

Clip-on interface for radio or
digital cellular phone in clip-
on-housing

4.3.2

4.3.3

GPS1200

4.3.2 Configuring SmartAntenna Interface

Configuration step-
by-step

Step |Description

1. Select Main Menu: Config...Mnterfaces... in the Leica software.

2. Highlight SmartAntenna.

3. EDIT (F3)

4 CONFIGURE SmartAntenna Interface
«Use Device: Yes»
Select a free Bluetooth port.

5. DEVCE (F5)

6. CONFIGURE Devices
Highlight ATX1230.

T. CONT (F1)

8. SRCH (F4) to search for Bluetooth devices.

Cg^ |SmartAntenna must be turned on.

9. CONFIGURE Search Bluetooth Device
All available Bluetooth devices are displayed.

10. Highlight the SmartAntenna to be used.

11. CONT (F1)

C= Ifthe SmartAntenna selected is connected for the first time, a Windows
CE authentication request comes up. Type in 0000 as identification
number for Leica's Bluetooth and click OK.

Æ> Опсе the Bluetooth connection is established, the Bluetooth LED on the

SmartAntenna starts flashing in blue.

GPS1200 Using RX1250

4.3.3 Configuring Clip-On Interface

Configuration step-
by-step

Using RX1250

Step

Description

Select Main Menu: Config...\Interfaces... in the Leica software.

Highlight Real-Time.

EDIT (F3)

2.
3.
4

CONFIGURE Real-Time Mode
<R-Time Mode: Rover? or <R-Time Mode: Reference»
«Port: Clip-on>

DEVCE (F5) to select the device attached to the GHT56.

CONT (F1) returns to CONFIGURE Interfaces.

GPS1200

Using RX1250

5 Receiver Protection with PIN

Description

Access

GPS1200
Enter Security PIN
Code

Receiver Protection with PIN

The receiver can be protected by a Personal Identification Number. If the PIN protec-
tion is activated, the receiver prompts for PIN code entry after starting up and before
GPS1200 Main Menu comes up.

If a wrong PIN has been typed in five times, a Personal UnblocKing code is required.

This chapter explains the workflow of entering PIN and PUK.

6Р51200 Enter Security PIN Code is automatically accessed during starting up the
receiver when «Use PIN: Yes» in CONFIGURE Start Up & Power Down, PIN
Code page and a PIN has been defined before.

6Р51200 Enter Security PUK Code is automatically accessed during starting up
the receiver when a wrong PIN code has been typed in five times.

ЇЙ 4 ui 89 Ф ce |
GPS1200 + ss IA s A
Enter Security PIN Code

PIN Code

OK (F4)
To accept the PIN code and to
continue with the subsequent screen.
mrar SHIFT QUIT (F6)
| oK | | | To turn off the receiver.

Description of fields

Field Option Description

PIN Code User input The PIN code as previously defined in
CONFIGURE Start Up & Power Down, PIN
Code page. The correct PIN code must be typed
in within five attempts or the PUK code is
required.

Next step

IF the PIN code THEN

entered is

correct GPS$1200 Main Menu is displayed.

wrong GPS1200 Enter Security PIN Code Error: 479 is displayed.

OK (F4) to return to GPS1200 Enter Security PIN Code where
a PIN code can be typed in again.

GPS1200 37

entered is

IF the PIN code THEN

wrong the fifth time

the PUK code is required. GPS1200 Enter Security PIN

Code Error: 478 is displayed.

OK (F4) to access GPS1200 Enter Security PUK Code.
Refer to paragraph "GPS1200 Enter Security PUK Code".

GPS1200 Refer to paragraph "GPS1200 Enter Security PIN Code" for information on softkeys.
Enter Security PUK
Code Description of fields
Field Option Description
PUK Code User input The PUK code as generated by Leica Geosys-
tems.

* Forreceivers delivered with firmware
version 2.10 or higher, the PUK code comes
with the receiver.

* For receivers delivered with firmware
versions lower than v2.10, contact a Leica
representative to obtain a PUK code.

Serial No. Output The serial number of the receiver. This is
needed to obtain the PUK code from Leica

Geosystems.

Next step

IF the PUK code entered | THEN

correct the old PIN code is cleared and the PIN protection is
deactivated. GPS1200 Main Menu is displayed.

wrong GPS1200 keeps asking for the correct PUK code.

SHIFT QUIT (F6) to turn off the receiver.

GPS1200 Receiver Protection with PIN

6 Manage... - Getting Started

Accessing
MANAGE XX step-
by-step

MANAGE
хх

Step |Description

1. Select Main Menu: Manage....

2. GPS1200 Management

Select an option in the menu.

3. CONT (F1) to access MANAGE XX.

С> |MANAGE XX can directly be accessed from a choicelist in some screens

for example the begin screen of application programs.

MANAGE Jobs (Device) is shown as an example. Additional softkeys are available
on other screens.

The listed options are stored in the database DB-X. Any unavailable information is
shown as ----- :

The screen for MANAGE Data: Job Name consists of several pages. The objects
listed and their order depend on the active sort and filter settings. An active filter for
а page is indicated by т shown to the right of the name of the page. On the Lines
(X) page and the Areas (X) page, the number in brackets next to the name of the
page indicate the number of open lines/areas. Example: Lines (2)/Areas (2) means
that two lines are open.

8 12-8

MANAGE

SITES [EIU GE T
ETATE.
Jobs (CF Card) x]

To select an option and to return to
the previous screen. For MANAGE

Job1 17.02.06 Codelists, the codes from the high-
Job2 17.02.05 lighted codelist are copied to the
active job.
NEW (F2)
To create an option. After storing a
Та new line/area, all existing lines and
CONT | NEW | EDIT | DEL | | INTL | areas which are open are closed.
EDIT (F3)

To edit the option. For MANAGE
Configuration Sets, the first screen
of the sequential configuration set
wizard for the highlighted configura-
tion set is accessed.

DEL (F4)
To delete the option. Available unless
MANAGE Data: Job Name, Lines
(X) page and MANAGE Data: Job
Name, Areas (X) page.

Manage... - Getting Started GPS1200 39

GPS1200

CLOSE (F4) and OPEN (F4)
To change between the options in the
Open column of the highlighted
line/area. The options are:
Yes: The line/area is open. Measured
points are assigned to the line/area.
No: The line/area is closed. Meas-
ured points are not assigned to the
line/area.

MORE (F5)
To display more information in the
second column. Available unless
MANAGE Jobs (Device) and
MANAGE Antennas.

PAGE (F6)
Available for MANAGE Data: Job
Name. To change to another page on
this screen.

CFCRD (F6) or INTL (F6)
Available for MANAGE Jobs. Avail-
able for receivers with internal
memory. To change between viewing
jobs stored on the CompactFlash
card or internal memory.

SHIFT LOG (F4)
Available for MANAGE Data: Job
Name, Points page. To view points,
lines, areas and free codes stored
with the job sorted by time.

SHIFT DEL (F4)
Available for MANAGE Data: Job
Name, Lines (X) page and MANAGE
Data: Job Name, Areas (X) page. To
delete the line/area.

SHIFT SET-D (F4)
Available for MANAGE Coordinate
Systems and MANAGE Configura-
tion Sets. Available unless a default
coordinate system/configuration set
is highlighted. To turn the highlighted
coordinate system/configuration set
into a user defined default coordinate
system/configuration set stored in the
receiver.

SHIFT FILT (F5)
Available for MANAGE Data: Job
Name. To define sort and filter
settings.

Manage... - Getting Started

Next step

SHIFT DEFLT (F5)

Available for MANAGE Coordinate
Systems, MANAGE Configuration
Sets and MANAGE Antennas. To
recall the deleted default coordinate
systems/configuration sets/ antennas
and to reset default configuration
sets/antennas to the default settings.

IF an option

THEN

is to be selected

highlight the desired option.

CONT (F1) closes the screen and returns to the screen from
where MANAGE XX was accessed.

is to be created or
edited

highlight the option and NEW (F2)/EDIT (F3). Refer to the
individual chapters.

Manage... - Getting Started

GPS1200 41

GPS1200

Manage... - Getting Started

7 Manage...\Jobs

7.1 Overview

Description Jobs

structure surveying projects.
contain all points, lines, areas and codes that are recorded and stored.

can be downloaded to LGO for post-processing or for data transfer to a further
program.

can be uploaded from LGO, for example, for real-time stake out operations.
may be stored on the CompactFlash card or internal memory, if fitted.

Manage... Jobs

GPS1200 43

7.2 Creating a New Job/Editing a Job

Access step-by-
step

сае

MANAGE
XX Job,
General page

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Jobs
(Device).

2. In MANAGE Jobs (Device) highlight a job. When creating a new job, the
settings of this job are applied to the new job, the codelist must be
selected.

3. NEW (F2)/EDIT (ЕЗ) to access MANAGE New Job/MANAGE Edit Job.

Editing jobs is similar to creating a new job. For simplicity, the screens are called
MANAGE XX Job and differences are clearly outlined.

Ar EN MI AS ^ үй,
MANAGE Н- 3 E: EN STORE (F1)

New Joh To store the settings and to return to

Reneral [Cndel ist |Гопггі Systeam
Name : MANAGE Jobs (Device).
Description : ----- DATA (F5)

Sa ci Available for editing a job. To view,
Creator : Ch edit and delete points, lines and
Device . CF Card Ф| areas stored with the job. Points,

lines and areas are shown on sepa-

Available for editing a job. To view,

edit and delete points, lines and

areas stored with the job. Points,

lines and areas are sorted by time in

one list.
Description of fields
Field Option Description
<Name:> User input A unique name for the new job. The name may

be up to 16 characters long and may include
spaces. Input required.

<Descrip- User input Two lines for a detailed description of the job.
tion:> This can be for example, work to be performed
or the classes contained in the job. Input
optional.

<Creator:> User input The person’s name who is creating/editing the
job. Input optional.

<Device:> The device on which the job will be stored.
Choicelist For receivers with internal memory.

Output For receivers without internal memory and when
editing a job.

GPS1200 Manage...\Jobs

MANAGE
XX Job,
Codelist page

MANAGE
XX Job,
Coord System

page

Manage...\Jobs

Next step
PAGE (F6) changes to the Codelist page.

44:07 Em. are FE S X IMPRT (F2)
MANAGE Available for editing a job. To add
Edit Job: Job1

n . additional codes from a new codelist
Ranaral|fndelist [Гоп Systen [Avge] Я . M
Codelist : Codelist 2 to the job. The name of this codelist is
copied to the job.
CODES (F4)

Available for editing a job. To view,
edit, delete, sort and group codes
currently stored in the job. The func-

To view, edit and delete points, lines
and areas stored with the job. Points,
lines and areas are shown on sepa-
rate pages. Selected sort and filter
settings apply.
SHIFT EXPRT (F2)

Available for editing a job. To copy
codes from the job to an existing or

new codelist.
Description of fields
Field Option Description
<Codelist:> | Choicelist Available for creating a new job or for editing a

job if no codes are stored in the job. Choosing a
codelist copies the codes to the job.

Output Available for editing a job if codes are stored in
the job. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in manually,
then the name of the active job is displayed.

Next step
PAGE (F6) changes to the Coord System page.

Choosing a coordinate system attaches it to the job. If it is not known which coordi-
nate system to use, select <Coord System: WGS 1984 >.

All other fields on this screen are output fields. They depend on the transformation
type of the selected coordinate system.

Next step
PAGE (F6) changes to the Avge page.

GPS1200 45

MANAGE
XX Job,
Avge page

In order to check measurements, the same point can be measured more than once.
If activated, an average or an absolute difference is calculated. Refer to paragraph
"MANAGE XX Job, General page" for information on the softkeys.

Description of fields

Field Option Description
<Averaging Defines the averaging principles for multiple
Mode:> measured points.

Average Computes the average for the position and the
height. Points exceeding the defined limits are
marked with ? in MANAGE Edit Point, Mean
page.

Absolute Diffs | Computes the absolute differences between two
points selected from a list of measured points
which are all stored with the same point ID.

Off Averaging is turned off.

<Points to Choicelist The type of points which will be taken into

Use:> account for averaging or for absolute differ-
ences.

<Avge Limit | User input Available for <Averaging Mode: Average>.

Pos:> and The acceptable difference for the position and

<Avge Limit height components.

Ht:>

From User input Available for <Averaging Mode: Absolute

<Easting:> to Diffs>. The acceptable absolute differences for

<Cartesian each coordinate component.

2:>

Next step

STORE (F1) stores the job and returns to MANAGE Jobs (Device).

GPS1200

Manage...\Jobs

8 Manage...\Data

8.1 Overview

Description Data is a generic term for points, lines and areas.

Data management is the administration of data stored in the active job. This includes

viewing data with their related information.
editing data.

creating new data.

deleting existing data.

filtering existing data.

Objects Objects

are points, lines and areas.
have a unique identification ID. This is the point ID, the line ID and the area ID.

may or may not have a code attached. This is a point code for a point, a line code
for a line and an area code for an area.

Manage...\Data

GPS1200 47

8.2 Point Management

8.2.1 Creating a New Point/Editing a Point

Access step-by-
step

MANAGE
XX Point,
Coords page

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: Job
Name, Points page.

2. MANAGE Data: Job Name, Points page
If a point is to be edited, then highlight the point.

3. NEW (F2)/EDIT (F3) to access MANAGE New Point/MANAGE Edit
Point: Point ID.

Editing points is similar to creating a new point. For simplicity, the screens are called
MANAGE XX Point and differences are clearly outlined. If editing a point, then the
visible pages and softkeys on this screen depend on the properties of the point being
edited.

13:28 — [4 479 . Hp] STORE (F1)
+ a4] B CA | To store the point and all associated

MANAGE 8 127

information and to return to

Point D ШШЕ MANAGE Data: Job Name, Points
page.

Easting : 764436.044 n COORD (F2) Р

North ing : 253215.935 n To view other coordinate types.

Ortho Ht | 428.200 » NORTH (F3) or SOUTH (ЕЗ)

Available for local geodetic or
Та WGS 1984 geodetic coordinates
STORE| COORD| | | | PAGE | when <Local Lat:> or <WGS 1984
Lat:> is highlighted. To change
between North and South latitude.

EAST (F3) or WEST (F3)

Available for local geodetic or

WGS 1984 geodetic coordinates
when <Local Long:> or <WGS 1984
Long:> is highlighted. To change
between East and West longitude.

MORE (F5)

Available for editing a point. To
display information about class, sub
class, 3D coordinate quality, time and
date of when point was stored, instru-
ment source and the flag for Linework
if available.

SHIFT ELL H (F2) or SHIFT ORTH (F2)
Available for local coordinates. To
change between the ellipsoidal and
the orthometric height.

GPS1200 Manage...\Data

MANAGE

SHIFT INDIV (F5) or SHIFT RUN (F5)
To change between entering an indi-
vidual point ID different to the defined
ID template and the running point ID
according to the ID template.

Description of fields

Field Option Description

«Point ID:> | User input The name ofthe new point. The configured point
ID template is used. The ID can be changed in
the following way:

* То start a new sequence of point ID's type
over the point ID.

* Foran individual point ID independent of the
ID template SHIFT INDIV (F5). SHIFT RUN
(F5) changes back to the next free ID from
the configured ID template.

If editing a point, then changing the point ID for
a point of any class applies this new point ID to
all other points with the same original name,
regardless of class.

Output Points of «Class: REF» cannot be renamed.

Coordinates | User input Negative geodetic coordinates are interpreted
as being of the opposite hemisphere or other
side of the meridian. For example, entering -
25 °N will be stored as 25 °S, entering -33 ^E
will be stored as 33 °W.

Output If editing, then points of «Class: REF» cannot

be renamed.

Next step
PAGE (F6) changes to the next page. Refer to the relevant paragraph below.

For GNSS points

Edit Point: Point ID, The name of the real-time reference station from where the GNSS point was meas-

Obs page

Manage... Data

ured, the name of antenna used to measure the point and the baseline values are
shown in output fields.

For TPS points

It is possible to edit the reflector height. Changing the reflector height recalculates
the point height.

The name of the station from where the point was measured is shown in an output
field.

Next step
PAGE (F6) changes to the next page. Refer to the relevant paragraph below.

GPS1200 49

MANAGE
XX Point,
Code page

The setting for <Thematc Codes:> in CONFIGURE Coding & Linework deter-
mines the availability of the subsequent fields and softkeys. For «Thematc Codes:
Without Codelist» none of the keys is available except for STORE (F1).

1 E K lest an AC. * wv a
8 12

MANAGE. 5 S 5
f:anrds] finde
point Code STORE (F1)
Code Deec : Green Trees To store the point and all associated
Species : oak information and to return to
Height : 2.5000 MANAGE Data: Job Name, Points
Condition A Dead page.
NEW-A (F2)

Та To create additional attributes for the

NAME (F3) or VALUE (F3)
Available for attributes for which an
attribute name can be typed in.
To highlight «Attribute n:> or the
field for the attribute value. The name
of «Attribute n:» can be edited and
an attribute value can be typed in.
LAST (F4)
To recall the last used attribute
values which were stored with this
point code.
DEFLT (F5)
To replace all currently displayed
attribute values with the default

values.
Description of fields
Field Option Description
«Point Choicelist Available for «Thematc Codes: With
Code:> Codelist>. All point codes of the job codelist can

be selected. The description of the code is
shown as an output field. The attributes are
shown as output, input or choicelist fields
depending on their definition.

<Code:> User input Available for <Thematc Codes: Without
Codelist>. The code to be stored with the point.
A check is performed to see if a point code of
this name already exists in the job. If so, the
according attribute values are shown.

<Attribute User input Available for <Thematc Codes: Without
n:> Codelist>. Up to eight attribute values are avail-
able.

GPS1200 Manage... Data

MANAGE
Edit Point: Point ID,
Annots page

Manage... Data

Next step

THEN

creating a point

STORE (F1) stores the point and all associated information
and returns to MANAGE Data: Job Name, Points page.

editing a point

* PAGE (F6) changes to the Annots page, if available.

* PAGE (F6) changes to the Mean page, if available. Refer
to "8.2.2 Mean Page" for information on softkeys and
fields on the Mean page.

The comments to be stored with the point can be edited except for <4:> if a GPS
seismic value has been recorded.

Next step

STORE (F1) stores the changes and returns to MANAGE Data: Job Name.

GPS1200 51

8.2.2 Mean Page

Description

Averaging

Access step-by-
step

MANAGE

Edit Point: Point ID,

Mean page

Various measured coordinate triplets for one point can be recorded using the same
point ID. If the averaging mode is activated, an average is calculated.

It is checked if the deviations of each single point are within the configured limits.
After averaging, the Mean page becomes available in MANAGE Edit Point: Point
ID and accessible from the Survey application program SURVEY Survey: Job
Name, Survey page.

Defining the averaging mode and configuring the limits

The averaging mode and the limits are configured in MANAGE New Job, Avge
page or in MANAGE Edit Job: Job Name, Avge page. Refer to "7.2 Creating a New
Job/Editing a Job".

Description of averaging modes

Averaging Description

mode

Average The horizontal and height distances from the measured points to
the average are computed and displayed on the Mean page.

Absolute The same as for Average above applies for Absolute Diffs.

Diffs Additionally, the absolute difference between two points selected
from a list of measured points, which are all stored with the same
point ID, are computed.

Off Averaging functionality is turned off.

Access within data management

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: Job
Name.
2. In MANAGE Data: Job Name, Points page highlight a point to be edited.

EDIT (F3) to access MANAGE Edit Point: Point ID, Mean page.

All measured coordinate triplets recorded using the same point ID are shown.

44:49 H- Site ag $ 0349

МАМАСЕ BAB
HDD STORE (F1)
0.0010 0. ? To store the changes and to return to
the screen from where this screen
was accessed.

GPS1200 Manage...\Data

Manage... Data

EDIT (F3)
To view and edit the highlighted
measured coordinate triplet.

DEL (F4)
To delete the highlighted coordinate
triplet. The average is recomputed.

MORE (F5)
To display more information in the
second column.

SHIFT DIFFS (F5)
Available for <Averaging Mode:
Absolute Diffs» and Yes set in the
Use column for exactly two measure-
ments. To display the absolute coor-
dinate differences when a local coor-
dinate system is active. Differences
exceeding the defined limit are indi-
cated by t.

Description of columns

Column Description
Use The use of a measured coordinate triplet in the averaging.
* Auto
The coordinate triplet is included in the averaging computation
if within the defined averaging limit.
* Yes
The coordinate triplet is always included in the averaging
computation even if it would fall outside the defined averaging
limit.
* No
The coordinate triplet is never included in the averaging
computation.
The coordinate triplet cannot be included in the averaging
computation. Automatically set by the system.
USE (F2) changes between the options.
dPos The horizontal distance from the measured coordinate triplet to the
average.
dHt The height distance from the measured coordinate triplet to the

average.

Available for measured coordinate triplets with Auto or Yes in the
Use column if <Averaging Mode: Average». Indicates an
exceeding of the limits.

GPS1200 53

Next step

IF a measured
coordinate triplet

THEN

is not to be viewed

STORE (F1) stores the changes and returns to MANAGE
Data: Job Name.

is to be viewed

highlight a measured coordinate triplet and EDIT (F3).

са

Codes cannot be changed. A change in codes must
be an overall change for the average point.

GPS1200 Manage... Data

8.3 Line/Area Management

8.3.1 Overview

Description

Manage... Data

A line/area consists of points and can be created/edited in MANAGE Data: Job
Name. The individual points are measured within any application program. These
can be all points except auxiliary points. Points can be simultaneously assigned to
one or more lines and/or areas.

A line/area can have
* а style for display in MapView.
e acode independent of the point code of the points comprising the line/area.

Points are assigned to a line/area when the line/area is open. Press USE (F4) to
open/close a line/area.

GPS1200 55

8.3.2 Creating a New Line/Area/Editing a Line/Area

сае

Access step-by-
step

сае

MANAGE
XX Line,
General page

Creating/editing lines/areas and the functionality of all screens and fields are similar
for lines/areas. For simplicity, only the creation/editing of a line is explained in this
chapter.

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: Job
Name.

2. PAGE (F6) until the Lines (X) page is active.
MANAGE Data: Job Name, Lines (X) page
If a line is to be edited, then highlight the line.

4. NEW (F2) EDIT (ЕЗ) to access MANAGE New Line/MANAGE Edit Line:
Line ID.

Editing lines/areas is similar to creating a new line/area. For simplicity, the screens
are called MANAGE XX Line and differences are clearly outlined.

Gi riesen eee WI ea SET
mance Ө ini йй] noch STORE (F1)

— —— — To store the line and all associated
3eneral [Points| finde

Line ID information and to return to

Pts to Store : All Points + MANAGE Data: Job Name, Lines

Line Style | (X) page. Any existing lines and

No. of Pts : 0 areas which are open are closed.

Length ZEN зззз- п | MORE (F5)

Start Date: 04.11.03 Available on MANAGE Edit Line:

Ulat Line ID. To display additional fields
STORE| | | | MORE | PAGE | with more information.
SHIFT INDIV (F5) or SHIFT RUN (F5)
To change between entering an indi-
vidual line ID different to the defined
ID template and the running line ID
according to the ID template.

Description of fields

Field Option Description

«Line ID:> User input The name of the new line.

«Pts to All Points, Only | The type of points which are used to form the
Store:> Msd Pts, Only |line during a survey.

Auto Pts, Only
Offset1 Pts or
Only Offset2 Pts

GPS1200 Manage...\Data

Field Option Description

«Line Style:> | Choicelist Available on MANAGE New Line. This is the
line style in which lines/areas are represented in
MapView and СО. For «Line Code: «None»?
on the Code page a line style can be selected
from a choicelist. Otherwise the line style as
defined for the selected line code on the Code
page is shown.

«No. of Pts:> | Output The number of points contained within the line.

<Length:> Output Available on MANAGE Edit Line: Line ID. The
sum of the distances between the points in the
sequential order in which they are stored for the
line. This can be a horizontal grid distance or a
geodetic distance on the WGS 1984 ellipsoid.

<Start Output Available on MANAGE Edit Line: Line ID. The
Time:> and time/date when the line was created.

<End Time:> | Output Available on MANAGE Edit Line: Line ID after
and <End pressing MORE (F5). The time/date when the
Date:> last point was added to the line. The values do

not change after deleting the last added point or
after editing unless an additional point is added

to the line.
Next step
IF THEN
creating a line PAGE (F6) changes to the Code page. Refer to paragraph
"MANAGE XX Line, Code page".
editing a line PAGE (F6) changes to the Points page. Refer to paragraph
"MANAGE Edit Line: Line ID, Points page".
MANAGE All points belonging to the line are listed. The point that was added last to the line is
Edit Line: Line ID, at the top of the list.
Points page 43:23

4p ui 79
MANAGE "t 8 12-7

Manage...\Data GPS1200 57

MANAGE
XX Line,
Code page

Creating
lines/areas most
efficiently

Next step

REMOV (F4)
To remove the highlighted point from
the line. The point itself is not deleted.
MORE (F5)
To display more information in the
second column.

PAGE (F6) changes to the Code page.

The functionality is very similar to MANAGE New Point, Code page. Refer to "8.2.1
Creating a New Point/Editing a Point".

Next step

STORE (F1) stores the changes and returns to MANAGE Data: Job Name, Lines

(X) page.

IF the task is to
create

THEN

multiple lines/areas
with subsequent
line/area ID's

use the hot key/user menu function FUNC Create New Line
(Quick)/FUNC Create New Area (Quick). Pressing the hot
key or selecting the function from the user menu creates and
immediately stores the new line/area. For the line/area ID, the
line/area ID template as defined in CONFIGURE ID
Templates is used. The code and attributes are taken over
from the last created line/area.

lines/areas with
certain codes

use quick coding. The job codelist must contain quick codes
for lines/areas. By tying the quick code a new line/area is
created and immediately stored with that line/area code and
attributes. For the line/area ID, the line/area ID template as
defined in CONFIGURE ID Templates is used.

GPS1200 Manage... Data

8.4 Point Sorting and Filters

8.4.1 Sorting and Filters for Points, Lines and Areas

Description

са

Access step-by-
step

сае

МАМАСЕ
Sorts & Filters,
Points page

Manage... Data

The sort settings define the order of the objects in the active job.
The filter settings define the objects to be viewed.

An active filter for an object is indicated in MANAGE Data: Job Name by v on the
right hand side of the page name.

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: Job
Name.
2. In MANAGE Data: Job Name on the Points, Lines (X) or Areas (X)

page, SHIFT FILT (F5) to access MANAGE Sorts & Filters.
3. MANAGE Sorts & Filters

The page for an object is displayed when the equivalent page is displayed
in MANAGE Data: Job Name.

The functionality on the Lines (X) and Areas (X) page is similar to that on the Points
page. For simplicity, only the Points page is described.

The available fields on this screen depend on the selected setting for <Filter:>.

42:43 — — eS i. |
МАМАБЕ +: eis EL

Points | ines |Arreas
Sort
CONT (F1)

Filter | Class 4)| To close the screen and to return to
the screen from where this screen

CTRL Š Show [=

ADJ : Hide *| was accessed.
REF : Show 4 STAKE (F5)

AVGE 2 Show t'i

Description of fields

Field Option Description

<Sort:> Ascend Point | Always available. The method by which points
ID, Descend are sorted.
Point ID,

Forward Time or
Backward Time

<Filter:> Always available. The method the points are
filtered by.

No Filter Shows all points.

Highest Class | Shows points of highest class.

GPS1200 59

Field

Option
Range of Pt ID's

Pt ID Wildcard

Time

Class

Instrument
Coordinate
Type

Point Code
Radius From Pt

Individual Line

Individual Area

Description

Shows points with point ID’s between the
entered start and end ID. The points are left
aligned and sorted by the first digit.

Shows points with point ID’s matching the wild-
card. * and ? are supported. * indicates an unde-
fined number of unknown characters. ? indi-
cates a single unknown character.

Shows points which were recorded within a
defined time window.

Shows points of the selected class.

Shows points originating from the selected
instrument or software program type.

Shows points of the selected type of coordi-
nates.

Shows points with selected codes attached.

Shows points within the defined radius from a
particular point. The radius is the horizontal
distance.

Shows points forming a selected line. This may
for example be useful during stakeout.

Shows points forming a selected area. This may
for example be useful during stakeout.

Next step

CONT (F1) returns to the screen from where MANAGE Sorts & Filters was

accessed.

GPS1200

Manage...\Data

8.4.2 Point, Line and Area Code Filter

сае

Access step-by-
step

MANAGE
Point Code Filter

Manage...\Data

For each object, a code filter exists. The point, line and area code filters are inde-
pendent from each other. The functionality is identical. For simplicity, only the point
code filter is explained.

Step |Description

1. Refer to "8.4.1 Sorting and Filters for Points, Lines and Areas" to access
MANAGE Sorts & Filters.

2. MANAGE Sorts & Filters
<Filter: Point Code>

3. CODES (F4) to access MANAGE Point Code Filter.

This screen shows the point codes from the active job and codes currently used as
filter.

ПИЕ а ee ar A XU
8

MANAGE AB
Point Code Fi er — CONT (F1)
К rt a
YES To close the screen and return to the
Path NO screen from where this screen was
Road YES accessed.
GROUP (F4)
To activate and deactivate code
groups. Codes belonging to a deacti-
diat vated code group are not displayed in
CONT | | |GROUP| USE | NONE | MANAGE Code Filter.
USE (F5)
To activate and deactivate the filter
for the highlighted code.
NONE (F6) or ALL (F6)
To deactivate or activate all point
codes.
SHIFT SORT (F5)
To define the order of the codes.
GPS1200 61

GPS1200

Manage...\Data

9 Manage...\Codelists

9.1 Creating a New Codelist/Editing a Codelist

сае

Access step-by-
step

сае

MANAGE
XX Codelist

Manage...\Codelists

It is recommended to create a codelist in LGO. A codelist can be transferred from
LGO to the System RAM of the receiver using the CompactFlash card.

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Codelists.
2. NEW (F2)/EDIT (F3) to access MANAGE New Codelist/MANAGE Edit
Codelist.

Editing codelists is similar to creating a new codelist. For simplicity, the screens are
called MANAGE XX Codelist and differences are clearly outlined.

13:38 __ mE AUT I а. =

MANAGE Boras
New Codel ist
Name Roads
б РР ] STORE (F1)
oseription. = ЇС_ == To store the codelist and to return to
Creator т == MANAGE Codelists.
CODES (F4)
To access MANAGE Codes where
codes can be created, edited or
[iat deleted and code groups can be
STORE| | | CODES| | | accessed.

Description of fields

Field Option Description

<Name:> User input A unique name for the codelist. The name may
be up to 16 characters long and may include
spaces. Input required.

<Descrip- User input A detailed description of the codelist. This can

tion:> be for example, work to be performed. Input
optional.

<Creator:> User input The person’s name who is creating the new

codelist. Input optional.

Next step
STORE (F1) stores the codelist and returns to MANAGE Codelists.

GPS1200 63

9.2 Creating a New Code/Editing a Code

Access step-by-
step

сае

MANAGE
XX Code

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Codelists.
2. In MANAGE Codelists highlight the codelist of which codes are to be
managed.

EDIT (F3) to access MANAGE Edit Codelist.

CODES (F4) to access MANAGE Codes.

MANAGE Codes

Codes from currently active code groups are shown. Тһе = indicates codes
which have attributes attached.

MORE (F5) displays information about the code description, the quick
codes if available, the code groups and the code type.

SHIFT GROUP (F4) to view, create, delete, activate and deactivate code
groups.

SHIFT SORT (F5) sorts codes by code name, code description, quick
code or the last use.

"| 4 8 4

MANAGE Codes

If a code is to be edited, then highlight the code.
T. NEW (F2)/EDIT (ЕЗ) to access MANAGE New Code/MANAGE Edit

Code.

Editing codes is similar to creating a new code. For simplicity, the screens are called
MANAGE XX Code and differences are clearly outlined.

ЕЛЕЕ ЕЕЕ $ > ШП

MANAGE Bora 3

New Code

Code : Path

Code Dese : Edge of Path

Group - Defau1t 4»

Code Type - Point 4

Linework - Begin Line‘ 5ТОВЕ (Е1)

To add the new code and any associ-

Line Style => CS
Attribute 1 i ----- ated attributes to the System

RAM/job codelist and to return to the

To add a new input field for an
attribute of attribute type normal and
of value type text. Attributes of
attribute type mandatory or fixed and
of value type real or integer must be
created in LGO. Up to twenty
attributes can be created.

GPS1200 Manage...\Codelists

Description of fields

NAME (F3) or VALUE (F3)
Available for attributes for which an
attribute name can be typed in. To
highlight the field for the attribute
name or the field for the attribute
value. The attribute name can be
edited and the attribute value to be
used as the default attribute value
can be typed in.

Field

Option

Description

<Code:>

User input

A unique name for the new code. The name may
be up to 16 characters long and may include
spaces. Input required.

User input

A detailed description of the code. This can be
for example the full designation if <Code:> is an
abbreviation. Input optional.

<Group:>

Choicelist

The code group to which the code is to be
assigned.

<Linework:>

Choicelist

None

Begin Line

Begin Area

Choicelist

Defines the use of the code. It can be used as
thematical code for points, lines or areas or as a
free code. It makes a code unique. For example
<Code: Oak> can have <Code Type: Point>,
<Code Type: Line>, <Code Type: Area>
and/or <Code Type: Free> within the same
codelist and job.

Available for <Code Type: Point> only. This
field allows a new line or new area to be opened
whenever the point code is newly selected. This
functionality is also available when creating
codelists with LGO Codelist Management.

Select this option to disable the functionality. All
other code settings on the instrument are not
affected when this option is set.

When a point code is newly selected, a new line
is opened and the point being stored is added to
the line. When the same point code remains
selected, a new line is not opened. The point
being stored is simply added to the current line.

The behaviour for opening a new area is the
same as the behaviour for opening a new line,
as mentioned above.

Not available for <Code Type: Free>. The style
in which lines/areas using this case are repre-
sented in MapView and LGO.

Manage...\Codelists

GPS1200

Next step
STORE (F1) adds the code to the codelist/stores the changes and returns to
MANAGE Codelists.

GPS1200 Manage...\Codelists

10 Linework

10.1 Performing Linework

са

Requirements

Access step-by-
step

SURVEY

Survey: Job Name,

Survey page

Linework

The Survey application program is used here to explain Linework.

e A display mask with a choicelist for Linework must be configured.
* The flags for Linework must be defined in CONFIGURE Coding & Linework
Settings, Linework page.

* «R-Time Mode: None» or <R-Time Mode: Rover? in CONFIGURE Real-Time
Mode.

Step |Description

1. Select Main Menu: Survey to access SURVEY Survey Begin.

2. In SURVEY Survey Begin select a job.

3. Select a configuration set with «R-Time Mode: None» or <R-Time Mode:
Rover».

Select an antenna.
CONT (F1) to access SURVEY Survey: Job Name.

The most important keys are explained.

Mri Es Su 758 a’ M HEN OCUPY (F1)

SURVEY : ds
CEPPSEEIESTS TUS To start recording positions. The
Survey [Ende Annnt [Ма position mode icon changes to the
Point ID — static icon. (F1) changes to STOP.
Linework HM eee d STOP (F1)

Antenna Ht: 2.000 n To end recording of positions when
enough data is collected. (F1)
changes to STORE.

3D CQ : о.009 n STORE (F1) "M :

[ AT To store the point information. (F1)

Description of fields

Field Option Description

«Point ID:» | User input The identifier for manually occupied points. The
configured point ID template is used. The ID can
be changed in the following ways:

* To start a new sequence of point ID's type

over the point ID.

GPS1200 67

Field

Option

Description

* Foran individual point ID independent of the
ID template SHIFT INDIV (F5). SHIFT RUN
(F5) changes back to the next ID from the
configured ID template.

<Linework:>

Begin Line

3pt Curve

ReOpen Any
Line

ReOpen Last
Line

End Line
Cont Line/Area
Start Spline

End Spline

Cont Spline

Begin Area

GPS1200

The linework flag to be stored with the point.
No linework flag is stored.

Opens a new line when the next point is stored.
Any line/area which is currently open is closed
and the last point belonging to that line/area is
given the End Line/Close Area linework flag.
The point may or may not be stored with a point
code.

Stores the linework flag for a curve through
three points and continues a line/area.

Opens a line from a list of all lines which are
currently stored in the job when the next point is
stored. The last code used with the reopened
line is automatically selected when the point is
stored. Any line/area which is currently open is
closed and the last point belonging to that
line/area is given the End Line/Close Area line-
work flag.

Opens the last used line again. The last code
used with the reopened line is automatically
selected when the point is stored.

Closes all open lines.
Indicates a line/area is open.

Stores the linework flag for beginning a spline
and continues any open line/area.

Closes a spline and continues any open
line/area.

Indicates a line/area is open with spline line
type.

Opens a new area when the next point is stored.
Any line/area which is currently open is closed
and the last point belonging to that line/area is
given the End Line/Close Area linework flag.
The point may or may not be stored with a point
code.

Linework

Field

Option

ReOpen Any
Area

ReOpen Last

Description

Opens an area from a list of all lines which are
currently stored in the job when the next point is
stored. The last code used with the reopened
area is automatically selected when the point is
stored. Any line/area which is currently open is
closed and the last point belonging to that
line/area is given the End Line/Close Area line-
work flag.

Opens the last used area again. The last code

Area used with the reopened area is automatically
selected when the point is stored.
Close Area Closes all open areas.
Next step
Step |Description

Go to the point to be occupied.

2. Select the linework flag to be stored with the next point.

3. OCUPY (F1)

4. STOP (F1)

5. STORE (F1)
> Depending on the option selected for <Linework:>, a line/area is opened,

closed or re-opened.

6. Repeat steps 1. to 5. until all points are occupied.

T. SHIFT QUIT (F6) to exit the Survey application program.

8. Use a format file to export the points including the linework flags.

GPS1200

10.2 Combining Linework and Coding

Description Combining Linework and coding can only be configured if thematical point codes or
if thematical point, line and area codes are available for selection. Thematical coding
can be done with or without codelists.

Requirements * A display mask must be configured with
* afield for codes.
* achoicelist for Linework.

* The configuration of a field for code types in a display mask is required for
working with point, line and area codes without choicelist. Else the configuration
of a field for code types is optional.

* Configure in CONFIGURE Coding & Linework, Coding page
* «Show Codes: Only Pt Codes> or «Show Codes: All Codes>.

* <Thematc Codes: With Codelist> or <Thematc Codes: Without
Codelist>.

* |n CONFIGURE Coding & Linework Settings, Linework page define the flags
for Linework.

* «R-Time Mode: None» or <R-Time Mode: Rover? in CONFIGURE Real-Time
Mode.

Cg The Survey application program is used here to explain the combination of Linework
and coding.
m step-by- Step |Description
1. Select Main Menu: Survey to access SURVEY Survey Begin.
2. In SURVEY Survey Begin select a job.
3. Select a configuration set with <R-Time Mode: None» or <R-Time Mode:
Rover».
4. Select an antenna.
CONT (F1) to access SURVEY Survey: Job Name.
70 GPS1200 Linework

SURVEY

Survey: Job Name,

Survey page

Linework and
coding step-by-
step

Linework

This is what a display mask configured for Linework and coding looks like. The most
important keys are explained.

БОГДЕ 2100 пете з хи
SURVEY + И gal B EXT

Survey: Local Job
Survey [Ende |Annat (Ма
Point D —YI
с a : " EL| ОСОРҮ (F1)
oo pe : int To start recording positions. (F1)
Li k : Begin Line ** `
т egin Lined changes to STOP.
Antenna Ht : 2.000 u STOP (F1)
СБОР . э 0 To end recording of positions when
i AT enough data is collected. (F1)
OCUPY| NEAR | | [H PNT| PAGE | changes to STORE.
STORE (F1)

To store the point information. (F1)
changes to OCUPY.

These step-by-step instructions refer to the previous screen.

For «Show Codes: Only Pt Codes»

Step | Field Description for thematical coding
With codelist Without codelist
1. <Code:> Select a code from the Type in a code.
choicelist. Only point codes
are available for selection.
cg «None»? to store a point — |----- to store a point without
without code or to perform |code or to perform Linework
Linework without coding. without coding.
2. «Code Point is displayed. This field is an output field. It can not be
Type: changed.
3. <Linework:> | Select an option for the Linework flag to be stored with the
point.
Ceo | en to store a point without Linework flag or to perform
coding without Linework.
4. - OCUPY (F1)
5. - STOP (F1)
6. - STORE (F1)
Ee l- * Тһе point is stored with the selected code.
- * Depending on the selection for <Linework:>, а
line/area is opened/closed.

GPS1200 71

For «Show Codes: All Codes>

Step | Field Description for thematical coding
With codelist Without codelist
1. <Code:> Select a code from the Type in a code.
choicelist. Point, line and
area codes are available for
selection.
cE «None»? to store a point — |----- to store a point without
without code or to perform |code or to perform Linework
Linework without coding. without coding.
2. «Code The type of the selected Select the type of the
Type:> code. This field is an output | entered code.
field. It can not be changed.
3. <Linework:> | Select an option for the Linework flag to be stored with the
point.
CB 1 to store a point without Linework.
4. - OCUPY (F1)
5. - STOP (F1)
6. - STORE (F1)
CE l- * Ifa point code was selected, the point is stored with the

selected code.

* Ға Ііпе/агеа code was selected, the point is stored as

part of the line/area.

* Depending on the selection for <Linework:>, а
line/area is opened/closed.

GPS1200

Linework

11 Manage...\Coordinate Systems

11.1 Overview

Description A coordinate system

consists of up to five elements.

allows the conversion from WGS 1984 geodetic or cartesian coordinates to local
cartesian, geodetic or grid coordinates and back.

Elements of coordi- The five elements which define a coordinate system are:

nate system А

a transformation

a projection

an ellipsoid

a geoid model

a Country Specific Coordinate System model

Manage...\Coordinate Systems GPS1200 73

11.2

Access step-by-
step

сае

MANAGE
XX Coordinate
System

Creating a New Coordinate System/Editing a Coordinate System

Step |Description
1. Refer to "6 Manage... - Getting Started" to access MANAGE Coordinate
Systems.
2. In MANAGE Coordinate Systems highlight a coordinate system. When

creating a new coordinate system, a copy of this coordinate system is
taken for further configurations.

3. NEW (F2)/EDIT (F3) to access MANAGE New Coordinate

System/MANAGE Edit Coordinate System.

Editing a coordinate system is similar to creating a new coordinate system. For
simplicity, the screens are called MANAGE XX Coordinate System and differences
are clearly outlined.

When editing a coordinate system the transformation type of the selected coordinate
system determines the availability and the options of the subsequent fields. Most
fields are identical with those for the creation of a new coordinate system.

Description of fields

Field Option Description
<Name:> User input A unique name for the coordinate system. The
name may be up to 16 characters long and may
include spaces.
<Residuals:> Available for transformations with control points.
The method by which residuals are distributed
throughout the transformation area.
None No distribution is made. Residuals remain with
their associated points.
1/0іѕќапсеХХ Distributes the residuals according to the

Multiquadratic

distance between each control point and the
newly transformed point.

Distributes the residuals using a multiquadratic
interpolation approach.

«Trans- Choicelist The type of transformation.

form:»

«Pre Trans- |Output Available for editing Twostep transformations.

form:> The name of a preliminary 3D transformation
which is used together with the selected projec-
tion to obtain preliminary grid coordinates to be
used for a final 2D transformation.

<Ellipsoid:> | Choicelist Available unless projection <Type: Custom-
ised>. The local coordinates are based on this
ellipsoid.

<Projec- Choicelist The map projection.

tion:>

GPS1200 Manage...\Coordinate Systems

Field Option Description

<Geoid Choicelist The geoid model.

Model:>

Next step

STORE (F1) stores the coordinate system and returns to MANAGE Coordinate

Systems.

Manage...\Coordinate Systems

GPS1200 75

11.3 Transformations/Ellipsoids/Projections

11.3.1 Accessing Transformation/Ellipsoid/Projection Management

Access step-by-
step

Step |Description
1. Refer to "6 Manage... - Getting Started" to access MANAGE Coordinate
Systems.
2. In MANAGE Coordinate Systems highlight a coordinate system to be
edited.
EDIT (F3)
4. In MANAGE Edit Coordinate System highlight <Transform:>, «Ellip-
soid:> or <Projection:>.
5. ENTER to access MANAGE XX.
Cg^ |The screen is similar to MANAGE Coordinate Systems. Refer to "6
Manage... - Getting Started" for information on the softkeys.
C= |In MANAGE Transformations all Classic 3D transformations stored in
the database DB-X are listed.
Next step
IF THEN
a transforma- highlight the desired transformation/ellipsoid/projection.
tion/ellip- CONT (F1) closes the screen and returns to the screen from

soid/projection is to | where MANAGE XX was accessed.

be selected

atransformation/an | highlight the transformation/ellipsoid/projection and NEW
ellipsoid/projection | (F2)/EDIT (F3). Refer to "11.3.2 Creating/Editing a Transfor-
is to be created or | mation/Ellipsoid/Projection".

edited

GPS1200 Manage...\Coordinate Systems

11.3.2

са

сае

Access step-by-
step

сае

MANAGE
XX Transformation,
General page

MANAGE
XX Transformation,
Parameters page

MANAGE
XX Transformation,
More page

Manage...\Coordinate Systems

Creating/Editing a Transformation/Ellipsoid/Projection

Creating/editing an ellipsoid/projection is very similar to creating/editing a transfor-
mation which is explained below. The main difference is that MANAGE XX Ellipsoid
and MANAGE XX Projection do not use pages and all the information is input on

one screen.

Classic 3D transformations can be created.

Step |Description
1. Refer to "11.3.1 Accessing Transformation/Ellipsoid/Projection Manage-
ment" to access MANAGE Transformations.
2. In MANAGE Transformations highlight a transformation. When creating

a new transformation/ellipsoid/projection, a copy of this transforma-
tion/ellipsoid/projection is taken for further configurations.

3. NEW (F2)/EDIT (F3) to access MANAGE New Transforma-
tion/MANAGE Edit Transformation.

Editing a transformation is similar to creating a new transformation. For simplicity,
the screens are called MANAGE XX Transformation and differences are clearly
outlined.

Description of fields

Field Option Description

<Name:> User input A unique name for the transformation. The
name may be up to 16 characters long and may
include spaces.

<Type:> Output No other transformations than Classic 3D can
be created.

Next step

PAGE (F6) changes to the Parameters page.

Enter the known values of the transformation parameters.

Next step
PAGE (F6) changes to the More page.

Description of fields

Field Option Description
<Height Choicelist or The type of heights to be computed. When
Mode:> Output editing a transformation, the option cannot be
changed.
GPS1200 77

Field Option Description

«Transf Choicelist The transformation model to be used. For

Model:> <Transf Model: Molodensky-Bad>, additional
input fields are available.

Next step

STORE (F1) stores the transformation and returns to MANAGE Transformations.

GPS1200

Manage...\Coordinate Systems

11.4 Geoid/CSCS Models

са

Access step-by-
step

MANAGE
Geoid Models

The creation of CSCS models on the receiver and the functionality of all screens and
fields is similar to those for geoid models. For simplicity, geoid models are used as
an example in this chapter.

Step |Description

1. Refer to "6 Manage... - Getting Started" to access MANAGE Coordinate
Systems.

2. In MANAGE Coordinate Systems highlight a coordinate system to be
edited.

EDIT (F3) to access MANAGE Edit Coordinate System.

In MANAGE Edit Coordinate System highlight «Geoid Model:>.

ENTER to access MANAGE Geoid Models.

All geoid models stored in the database DB-X are listed. Any unavailable information
is shown as ----- ‚ for example, if the geoid field file which was associated to the geoid
model is not available on the CompactFlash card / internal memory.

14:38 Ep ЖЕШ =

MANAGE 8 12-8 Boras
CONT (F1)
Hy Swiss System To select the highlighted geoid model
and to return to the previous screen.
CFCRD (F2)

To create a new geoid model. For
each geoid field file on the Compact-
Ria Flash card, one geoid model is auto-
CONT |CFCRD| EDIT | DEL | |INTL| matically created.
EDIT (F3)
To view the highlighted geoid model.
None of the fields can be edited.
DEL (F4)
To delete the highlighted geoid
model. The geoid field file which was
associated with this geoid model is
then also deleted.
INTL (F6)
To create a new geoid model. For
each geoid field file in the internal
memory, one geoid model is auto-
matically created.

Manage...\Coordinate Systems GPS1200 79

GPS1200

Manage...\Coordinate Systems

12 Manage...\Configuration Sets

12.1 Overview

Description The receiver has numerous user configurable parameters and functions. This allows
a variety of preferences to be addressed. The configuration of the parameters and
functions for an individual measuring technique are combined in a configuration set.

Default configura- Default configuration sets exist on the instrument. They use standard settings for the
tion sets majority of application programs. Default configuration sets can be edited and
deleted. It is always possible to restore the default configuration sets.

User defined New configuration sets can be created. The configuration set wizard assists in
configuration sets editing configuration sets.

Manage...\Configuration Sets GPS1200 81

12.2 Creating a New Configuration Set

Access step-by-
step

MANAGE
New Configuration
Set

Step |Description
1. Refer to "6 Manage... - Getting Started" to access MANAGE Configura-
tion Sets.
2. In MANAGE Configuration Sets highlight a configuration set. A copy of
this configuration set is taken for further configurations.
3. NEW (F2) to access MANAGE New Configuration Set.

Description of fields

Field Option Description

<Name:> User input A unique name for the new configuration set.
<Descrip- User input A detailed description of the configuration set,
tion:> since the name of a configuration set is usually

an abbreviation. Input optional.

<Creator:> User input

The person’s name who creates the new config-
uration set. Input optional.

Next step
STORE (F1) accesses the next subsequent screen in the configuration wizard.
Refer to the chapters "Config...\XX" for information on the screens.

GPS1200 Manage...\Configuration Sets

12.3 Editing a Configuration Set

Access step-by-

Ste Description
step with using B S

configuration set 1. Refer to "6 Manage... - Getting Started" to access MANAGE Configura-
wizard tion Sets.
2. In MANAGE Configuration Sets highlight a configuration set to be
edited.

3. EDIT (F3) to access CONFIGURE Wizard Mode. This starts the sequen-
tial configuration set wizard.

4. Refer to the chapters "Config... XX" for information on the screens.
Access without The currently active configuration set can be edited. Choose one of the following
using the configu- options and access the required screens to edit the configuration set.
ration set wizard Select Main Menu: Config...
OR
From inside an application program press USER and then CONF (F2).
OR

In CONFIGURE Wizard Mode, press LIST (F6).

Manage... Configuration Sets GPS1200 83

GPS1200

Manage...\Configuration Sets

13 Manage...\Antennas

13.1 Overview

Description * Leica Geosystems antennas are predefined as default and can be selected from
a list.

e Additional antennas can be defined.
* Default antennas contain an elevation dependent correction model.

e New antenna correction models can be set up and transferred to the receiver
using LGO.

Manage... Antennas GPS1200 85

13.2 Creating a New Antenna/Editing an Antenna

Access step-by-
step

сае

MANAGE
XX Antenna,
General page

Step |Description
1. Refer to "6 Manage... - Getting Started" to access MANAGE Antennas.

2. In MANAGE Antennas highlight an antenna. When creating a new
antenna, highlight the antenna with offset characteristics similar to those
required by the new antenna.

3. NEW (F2)/EDIT (F3) to access MANAGE New Antenna/MANAGE Edit
Antenna.

Editing antennas is similar to creating a new antenna. All fields can be edited except
those of Leica default antennas. For simplicity, the screens are called MANAGE XX
Antenna.

43:20 |a 40те FOO YN |

MANAGE + a7 84| % EXT
New Antenna

Reneral [TRS
Name B New Antennal
Hz Offset = 0.0000
V Offset 0.3600
L1 PhOffset 0.0648
L2 PhOffset 0.0622
Copy Additional
Corrections Yes 3| ibis (F1) h d
Гота T o store the new antenna and to

Field Option Description

<Name:> User input A unique name for the new antenna.

«Hz Offset:> | User input Horizontal offset of measurement reference

point.
«V Offset:> | User input Vertical offset of measurement reference point.
<L1 User input Offset of L1 phase centre.
PhOffset:>
<L2 User input Offset of L2 phase centre.
PhOffset:>

«Copy Addi- | Yes or No Allows additional corrections to be copied from
tional the antenna which was highlighted when
Correc- MANAGE New Antenna was accessed.
tions:>

Next step
PAGE (F6) changes to the IGS page.

GPS1200 Manage...\Antennas

MANAGE The combination of values typed in on this page provides a unique standardised ID

New Antenna, for the antenna being used.
IGS page Description of fields
Field Option Description
<IGS Name:> | User input The International GPS Service name of the
antenna.
<Serial User input The serial number of the antenna.
Number:>
<Set Up User input The set up number of the antenna. This identi-
Number:> fies the version number of the current calibra-
tion.
Next step

STORE (F1) stores the antenna and returns to MANAGE Antennas.

Manage...\Antennas

GPS1200 87

GPS1200

Manage...\Antennas

14 Convert... Export Data from Job

14.1 Overview

Description The settings on this screen define the data that is converted and exported and what
format is used.

Data is exported from the selected job. Currently active view, filter and sort settings
are applied. The points that are exported are those that are visible in MANAGE
Data: Job Name.

Data can be exported

e toa file on the CompactFlash card.

* toa file on the internal memory, if fitted.

e via RS232 to a Leica TPS400/700 instrument.

Export format The export format must be composed individually as format file using LGO. Refer to
the online help of LGO for information on creating format files.

Convert... Export Data from Job GPS1200 89

14.2 Exporting ASCII Data

Requirements

Access
EXPORT

Export ASCII Data
from Job

At least one format file was created using LGO and has been transferred to the
System RAM.

Select Main Menu: Convert.. Export Data from Job.

SS H- AED > ШП

EXPORT Ў CRAB

Export ASCII Data from Job X
Export To - CF Сага
Directory : Data |

ы СОМТ (Е1)
Job : Default 4 To export the data.
Coord System : WGS84 CONF (F2)
Format File : gs i18.FRT s] To define the default extension for
Piden . Detaile the export file and to select the
ш 7 itd ra behaviour for the Setup measure-
CONT | CONF | | FILT | | csys | ments.
FILT (F4)

To set the sort and filter settings for
export. The setting for <Sort:> on the
Points page defines the order in
which points, lines and areas are
exported. The setting for <Filter:> on
each page defines which points, lines
or areas are exported.
IFACE (F5)
Available for <Export To: RS232>.
To choose the port and device to
which the data should be exported.
CSYS (F6)
To update the coordinate system in
which the coordinates are exported.

Description of fields

Field Option Description
<Export To:> | CF Card, Defines to where the exported file should be
Internal written.
Memory, if fitted,
or RS232
<Directory:> | Data, GSI or Available for <Export To: CF Card>. The data
IRoot can be exported to the Data, the XGIS or the root
directory. Data must be stored to the \GSI direc-
tory in order to read it in a TPS1100. For
«Export To: Internal Memory>, the data is
always exported to the \Data directory.

GPS1200 Convert...\Export Data from Job

Field Option Description

<Job:> Choicelist If points from a job on the internal memory are to
be exported, open this choicelist. When in this
choicelist press CFCRD (F6) or INTL (F6) to
select a job from a different memory device.

«Coord Output The coordinate system currently attached to the

System:> selected <Job:>.

<Format Choicelist The format files currently available in the

File:> System RAM.

«File Name:> | User input Available for «Export To: CF Card» and
«Export To: Internal Memory». The name of
the file to which the data should be exported.
The name is automatically suggested based on
the job name to be exported and an extension.

<Port:> Output Available for <Export To: RS232>. Displays the
port currently configured to be used with RS232.

<Device:> Output The device currently configured to be used with
<Port:>.
Convert...\Export Data from Job GPS1200 91

GPS1200

Convert...\Export Data from Job

Convert... Mmport Data to Job

15.1 Overview

Description

Import formats

Access step-by-
step

This screen lists all the importers loaded. The data to import must be stored on the
CompactFlash card.

Data can be imported to a job
* onthe CompactFlash card.
* onthe internal memory, if fitted.

Data can be imported in ASCII, GSI8, 65116 or DXF format.

Step |Description

1. Select Main Menu: Convert...\lmport Data to Job to access IMPORT
Import Data to Job Menu.
2. IMPORT Import Data to Job Menu

The Import Data to Job menu lists all the converters for importing data.

Highlight the Import Data converter to be started.

3. CONT (F1) to access the screen for the Import Data converter.

Cg^ |The screens for each Import Data converter can be accessed directly by
pressing a configured hot key or USER.

Convert... Mmport Data to Job GPS1200 93

15.2 Importing ASCII/GSI Data

Requirements

Access
IMPORT

Import ASCII/GSI
Data to Job

e For ASCII files:
At least one ASCII file with any file extension is stored іп the «DATA directory of
the CompactFlash card.

* For GSI files:

At least one ASCII file in GSI format with the file extension *.gsi is stored in the
\GSI directory of the CompactFlash card.

Refer to "15.1 Overview" to access Import ASCII/GSI Data to Job.

EINEN TEE 4 Lt- d A Е Er CONT (F1)
7 l2

IMPORT <ZA B To import the data.

Import ASCII/GSI ue E TE CONF (F2)

From СЕ Eme

Import : ASCII Data 4 For «Import: ASCII Data»: To select
From File : logfile. txt 4 the delimiter, the positions of the

To Job : Job1 4 particular variables and, if required,
Header : None 4f] the number of lines used to describe

each point or if the variables are
delimited by one or multi spaces.
Та For «Import: GSI Data»: Coordi-
CONT | CONF | VIEW | | | | nates сап be switched for "left
handed" coordinate systems. All
WI 81 data, normally Easting, is then
imported as Northing and all WI 82
data, normally Northing, is then
imported as Easting.
VIEW (F3)
To display the data in «From File:>.
SHIFT HTS (F2)
To define the height type for the
imported data and if the Easting
should be multiplied by -1. This is
required by some coordinate

Systems.

Description of fields

Field Option Description

«From:» Choicelist ASCII/GSI data can be imported to a job, from
either the CompactFlash card or internal
memory.

<Import:> Choicelist The type of data to be imported.

<From File:> | Choicelist For <Import: ASCII Data> all files in the \DATA
directory on the CompactFlash card can be
selected.
For <Import: GSI Data> all files in the \GSI
directory on the CompactFlash card can be
selected.

GPS1200 Convert...\lmport Data to Job

to 10

Field Option Description

«To Job:> Choicelist Choosing a job as destination for import makes
this job the active job.

<Header:> None and from 1 | Available for <Import: ASCII Data>. This option

allows up to ten header lines which may exist in
an ASCII file to be skipped. Select the number of
header lines.

Convert...\lmport Data to Job

GPS1200

15.3 Importing DXF Data

Requirements

Access
DXF IMPORT

Import DXF Data to
Job

* Atleast one DXF file with the file extension *.dxf has to be stored in the «DATA
directory of the CompactFlash card.

Refer to "15.1 Overview" to access Import DXF Data to Job.

EES ky L1- D a ^ үф
HE E:

DXF IMPRT B
Import DXF Data 5: iH X CONT (F1)

From File ШЕГШЕ) To import the data.
To Job : Job1 | СОМЕ (F2)

To define an optional prefix for
blocks, points and/or lines, to select
the file units and to activate the crea-

Description of fields

Field Option Description

«From:» Choicelist DXF data can be imported to a job, from either
the CompactFlash card or internal memory.

«To Job:> Choicelist Choosing a job as destination for import makes
this job the active job.

<Progress:> |Output Progress bar of the import procedure.

GPS1200 Convert...\lmport Data to Job

16 Convert...\Copy Points Between Jobs

Description This chapter explains the process of copying points from one job to another.
Access Select Main Menu: Convert...\Copy Points Between Jobs.
COPY 21:44 [+ Фи aem a" * w gp CONT (F1)
Copy Points COPY T et Bora = To copy a selection of points.
Between Jobs te = zt FILT (F4)
rom Job Job1 tm . я :
Coord System : Swiss To define the point sort and/or point
filter settings of points from the job
To Job Job2 «j| «From Job:».
DATA (F5)
To view, edit and delete points, lines
and areas stored with the job. Points,
Гота lines and areas are shown оп sepa-
CONT | | | FILT | DATA | csYs | rate pages. Selected sort and filter
settings apply.
CSYS (F6)
To select a different coordinate
system.
Description of fields
Field Option Description
«From Job:> | Choicelist Describes where the points are to be copied
from.
<Coord Output The coordinate system which is currently
System:> attached to the job <From Job:>.
<To Job:> Choicelist Describes where the points are to be copied to.

Convert...\Copy Points Between Jobs

GPS1200 97

GPS1200

Convert...\Copy Points Between Jobs

17 Config...\Survey Settings...

17.1 ID Templates

17.1.1 Overview

Description ID templates are predefined templates for point, line or area numbers. ID templates
save having to type in the ID for each object. They are useful when many points are
collected quickly, for example in post-processed and real-time kinematic operations.

Access Select Main Menu: Config...\Survey Settings...\ID Templates.
CONFIGURE Description of fields
ID Templates
Field Option Description
<Survey Choicelist Sets the ID templates for manually occupied
Pts:> points.
<Auto Pts:> | Choicelist Sets the ID templates for auto points. These
points are automatically recorded at a specific
rate.
<Auxil Pts:> | Choicelist Sets the ID templates for auxiliary points. These
points are used when trying to find a stake-out
point.
<Lines:> Choicelist Sets the ID templates for lines.
<Areas:> Choicelist Sets the ID templates for areas.
Next step

CONT (F1) closes the screen and returns to the screen from where CONFIGURE ID

Templates was accessed.

Config... Survey Settings...

GPS1200 99

17.1.2 Creating a New ID Template/Editing an ID Template

ош step-by- Step |Description
1: Refer to "17.1.1 Overview" to access CONFIGURE ID Templates.
2. In CONFIGURE ID Templates highlight any field.
3. ENTER to access CONFIGURE ID Template Library.
4 Highlight an ID template. A copy of this ID template is taken for further
configurations.
5. NEW (F2)/EDIT (F3) to access CONFIGURE New ID
Template/CONFIGURE Edit ID Template.
CS DEL (F4) deletes the highlighted template.
Cg Editing ID templates is similar to creating a new ID template. For simplicity, the
Screens are called MANAGE XX ID Templates and differences are clearly outlined.
CONFIGURE Description of fields
XX ID Template
Field Option Description
<ID:> User input The name of the ID template.

<Increment:> | Numeric only

Alphanumeric

The rightmost numeric part is incremented
within the point ID.

The rightmost character within the point ID is
incremented regardless of whether that char-
acter is numeric or alphanumeric.

<Increment |User input

The amount by which the ID is incremented.

By:>

<Cursor Last Character | The character position at which the cursor is

Posn:> or from 1 to 16 | placed when ENTER is pressed in «Point ID:>
when surveying points.

Next step

CONT (F1) stores the ID template and returns to CONFIGURE ID Template

Library.

100

GPS1200

Config...\Survey Settings...

17.2 Display Settings

Description Display settings define the parameters shown on a page on the SURVEY screen.

Four display masks are definable.

Mask 1: Always shown on the SURVEY screen.
Mask 2: Can be shown or hidden on the SURVEY screen.
Mask 3: Can be shown or hidden on the SURVEY screen.
Mask 4: Never shown on the SURVEY screen. Reserved for application
programs.
Access Select Main Menu: Config... Survey Settings...\Display Settings.
CONFIGURE Rie s Фи af a’ мае UU
Display Settings CONFIGURE T 8 12-8 % LAB
Display Settings
Define Ħask 2
Мате : Code

Use in Survey: No CONT (F1)
To accept changes and return to the

Position and Screen from where this screen was

Description of fields

Field Option Description

«Define: Mask 1, 2, 3 or 4 | Selected display mask.

«Use in Output Indicates if the display mask is shown or hidden
Survey:> as a page in SURVEY.

<Position From 0.05s to Determines how often positions are computed
and Screen |1.0s and the screen display is updated. The
Update:> maximum update rate using Bluetooth on

RX1250 is 0.2 s.

Next step
DMASK (F3) accesses CONFIGURE Define Display Mask n.

Config... Survey Settings... GPS1200 101

CONFIGURE
Define Display
Mask n

102

ELE 4 u- 7 Ф og
CONFIGURE H$ su ДӘ] s pA
Def ine Display Hask 2

Name : Code
Visible - No 4» CONT (F1)
Fixed Lines: 144 To accept changes апа to return to
1st Linc : Point 10 А n
?nd Line; Line Space Full 4 CONFIGURE Display Settings.
3rd Line : Code {| CLEAR (F4)
4th Line : Attrib 01 | To set all fields to «XXX. Line: Line
5th Line : Attrib 02 = Space Full>.
6th Line А Attrib 03 |
отат DEFLT (F5)
CONT | | | CLEAR|DEFLT| | To recall the default settings.
Description of fields
Field Option Description
«Visible: Yes or No Shows or hides the display mask as a page in
SURVEY.
«Fixed From 0 to 5 Defines how many lines do not scroll in the
Lines:» survey screen when that display mask is used.
«1stLine:» | Output Fixed to «1st Line: Point ID».
«2nd Line:> |Choicelist For each line an option can be selected.
to «16th
Line:>
Next step

CONT (F1) returns to CONFIGURE Display Settings.

GPS1200 Config...\Survey Settings...

17.3

Description
Access

CONFIGURE
Coding & Line-
work,

Coding page

Coding & Linework

The settings on this screen define the method of coding.

Select Main Menu: Config...\Survey Settings... Coding & Linework Settings.

Description of fields

Field Option Description
«Quick Never, On or Off | Determines if quick coding is never available,
Code:> activated or available but deactivated.
<Digits:> 1,20r3 Available unless «Quick Code: Never>.
Sets the mostly used number of digits for the
quick code.
«Rec Free After Point or Available unless «Quick Code: Never>.
Code:> Before Point Determines if a free code measured with a quick

code is stored before or after the point.

<Attributes:>

Default Values
or Last Used

Determines the attribute values displayed under
certain circumstances. This is applicable to both
the storing and displaying of attribute values.

Always Prompt

Only If No Value

Code Change
Only

The screen XX Enter Mandatory Attribute will
always appear when codes, having one or more
attributes of attribute type mandatory, are being
stored.

The screen XX Enter Mandatory Attribute will
only appear when codes, having one or more
attributes of attribute type mandatory, are being
stored without an attribute value.

The screen XX Enter Mandatory Attribute will
only appear when a new code with a mandatory
attribute was selected.

With Codelist

Without
Codelist

Codes stored within the job codelist can be
selected to code points, lines and areas.

Codes stored within the job codelist cannot be
selected to code points, lines and areas. Each
code must be entered manually.

Only Pt Codes
or All Codes

Either only point codes or all codes of the job
codelist will be available in the choicelist for
<Code:>/<Point Code:> in a display mask of an
application program. Selecting a line/area code
opens a new line/area.

«String
Attrib:>

Choicelist

Available for <Show Codes: All Codes>. When
this field is active, surveyed points that have the
same code attached are strung to one line.

Config...\Survey Settings...

GPS1200 103

CONFIGURE
Coding & Line-
work,
Linework page

104

Next step

PAGE (F6) changes to the Linework page.

The flags for Linework are defined on this screen.

The flags defined on this screen are linked to the options available for <Linework:>
in a display mask of an application program. The selection for <Linework:> in a
display mask determines the flag stored with a point. The availability of <Linework:>
in a display mask is configured in CONFIGURE Define Display Mask n.

Description of fields

Field Option Description

«Begin User input Opens a new line when the next point is stored.

Line:> Any lines which are currently open are closed.
The point may or may not be stored with a point
code.

<3pt Curve:> | User input Stores the linework flag for a curve through
three points and continues a line/area.

<ReOpen User input Opens the last used line again.

Last Line:>

«End Line:> | User input Closes all open lines.

<Cont User input Indicates a line/area is open.

Line/Area:>

<Start User input Stores the linework flag for beginning a spline

Spline:> and continues any open line/area.

<End User input Stores the linework flag to stop a spline.

Spline:>

<Cont User input Indicates a line/area is open with spline line

Spline:> type.

<Begin User input Opens a new area when the next point is stored.

Area:> Any areas which are currently open are closed.
The point may or may not be stored with a point
code.

<ReOpen User input Opens the last used area again.

Last Area:>

<Close User input Closes all open areas.

Area:>

Next step

CONT (F1) returns to the screen from where CONFIGURE Coding & Linework was

accessed.

GPS1200

Config...\Survey Settings...

17.4

Description

Access

CONFIGURE
Quality Control
Settings

Quality Control Settings

The settings on this screen define the limits for coordinate quality and DOP values
accepted for point occupations.

Select Main Menu: Config...\Survey Settings... Quality Control Settings.

Description of fields

Field Option Description
«cQ None, Pos Only, | The type of coordinate quality to be checked
Control:> Height Only or | before storing a point. If activated, the limit
Pos & Height defined in «Maximum CQ:> is checked before
storing a point.
«Maximum | User input Available unless <CQ Control: None>.
CQ:» The maximum acceptable coordinate quality.
«DOP Limit:» | None, GDOP, If activated, the limit defined in «Maximum
PDOP, НООР or | DOP:> is checked. GPS positions are unavail-
VDOP able when the limit is exceeded.
«Maximum _ | User input Available unless <DOP Limit: None>.
DOP:> The maximum acceptable DOP value.
<Allow 2D Yes 2D positions can be obtained with only three
Posn:> satellites available. The height is fixed to that of
the last position computed with height.
No 2D positions cannot be obtained with only three
satellites available.
Next step

CONT (F1) returns to the screen from where CONFIGURE Quality Control
Settings was accessed.

Config... Survey Settings...

GPS1200

105

17.5 Logging of Raw Obs

Description

Access
CONFIGURE

Logging of Raw
Obs

106

Logged raw observations are used for

* Static and kinematic operations. With these operations, raw data is always post-
processed in the office. Raw data must therefore be logged on both reference
and rover receivers.

real-time operations

to check the work in the office by post-processing.
OR

to fill in gaps when a real-time position could not be calculated in the field.
This can happen due to problems with the real-time data reception.

Observations must be logged on all receivers which will be used for post-processing.

Select Main Menu: Config...\Survey Settings.. Logging of Raw Obs.

ШЕ РЕШЕ +ê SN E
8

CONFIGURE Boras
Logging of Raw obs

Log Raw Obs If Radio Down 4|
Log After JENNI: -

CONT (F1)
To accept changes and return to the

For Hinimum : Bain screen from where this screen was
accessed.
Log Rate 5.0s 4
8 t FILES (F6)

Available unless <Log Raw Obs:
Never> or <Log Raw Obs: No>. To
[iat configure the files for raw observa-

Description of fields

Field Option Description

<Log Raw Never, Static Available unless <R-Time Mode: Reference>.
Obs:> Only or Static & | Determines if raw observation are logged and

Moving during what circumstances they are logged.

If Radio Down Available for <R-Time Mode: Rover>. Contin-
uous raw observation logging during static and
moving intervals when no real-time corrections
are being received by a receiver.

Yes or No Available for <R-Time Mode: Reference».

Determines if the reference logs raw observa-
tions.

< од After:> | User input Available for «Log Raw Obs: If Radio Down».
Raw data logging begins after the specified time

if radio contact is lost.

«For User input Available for «Log Raw Obs: If Radio Down».
Minimum:> Raw data logging continues for the specified
time, also after the radio link is regained.
GPS1200 Config...\Survey Settings...

CONFIGURE
Raw Observation
Files

Field Option Description
< од Rate:> | From 0.055 to Rate at which raw observations are logged. The
300.0s maximum logging rate using Bluetooth on
RX1250 is 0.2 s.
Next step

IF files for raw
observations

THEN

are not to be config-

ured

CONT (F1) closes the screen and returns to the screen from
where CONFIGURE Logging of Raw Obs was accessed.

are to be config-

ured

tion Files".

FILES (F6). Refer to paragraph "CONFIGURE Raw Observa-

Description of fields

Field Option Description

«Use Sepa- | Yes or No Stores all raw observations into one or into

rate Files:> separate files.

«Obs File From 1 min to Available for «Use Separate Files: Yes>.

Size:> 24 hours Splits the recorded data up into files of a specific
period of time.

«Split Yes or No Available for «Use Separate Files: Yes» and

Tracks:> unless <R-Time Mode: Reference>.
Activates the interruption of static intervals when
the time set for <Obs File Size:> is reached.
The data is then recorded to a new file.
Moving intervals are always interrupted and
written to a new file when the time set for <Obs
File Size:> is reached.

«Delete Old | Yes or No Available for <Use Separate Files: Yes>.

Files:> Deletes the recorded data after a specified
period of time.

<When Older | From 1 day to Available for <Delete Old Files: Yes>. The

Than:> 30 days period of time after which the recorded data is
deleted.

Next step

Step |Description

1. CONT (F1) returns to CONFIGURE Logging of Raw Obs.

2. CONT (F1) returns to the screen from where CONFIGURE Logging of

Raw Obs was accessed.

Config...\Survey Settings...

GPS1200

107

17.6

Description

Access
CONFIGURE

Point Occupation
Settings

108

Point Occupation Settings

The settings on this screen define the way in which points are occupied and

recorded.

Select Main Menu: Config... Survey Settings... Point Occupation Settings.

11:45 ed
CONFIGURE

Auto OCCUPY

kylt 7
7 12-7

a? 55.00

Bory

B
Point Occupation Settings
Pt Occupation: Norma 1 4f]

CONT (F1)
To accept changes and return to the
screen from where this screen was

Auto STOP accessed.

STOP Criteria: >| PARAM (ЕЗ)

Beep On STOP : Yes P To configure the time interval after

со Hp EC Se + which a point occupation can be

End Surve Htanua1 Ф] stopped automatically. Refer to para-
у [iat graph "CONFIGURE Post-Process

Description of fields

Field Option Description

«Pt Occupa- | Normal Records observations between pressing

tion:> OCUPY (F1) and STOP (F1).

Instantaneous | Records the time tag when OCUPY (F1) is
pressed. A coordinate is interpolated between
the positions at the neighbouring two epochs to
filter out effects of slight movement.

«Auto Available for «Pt Occupation: Normal».
OCCUPY:

No Starts point occupation when pressing OCUPY
(F1).

Yes Starts point occupation automatically when
entering SURVEY Survey: Job Name. All
subsequent points must be occupied by
pressing OCUPY (F1).

Timed Starts point occupation automatically at a
certain time. The start time is specified in
SURVEY Survey: Job Name.

«Auto Yes or No Available for «Pt Occupation: Normal».
STOP:> Stops the measurements automatically when
the parameter defined for <STOP Criteria:>
reaches 100 %.
GPS1200 Config...\Survey Settings...

Field Option Description
«STOP Choicelist Available for «Pt Occupation: Normal» and
Criteria:> <Auto STOP: Yes>.
Defines the method used for <Auto STOP:>.
The setting determines the computation and
value to be shown for <% Completed:> in the
display mask and in STATUS Occupation
Information.
<% Indi- Choicelist Available for <Pt Occupation: Normal> and
cator:> <Auto STOP: No>.
The setting determines the computation and
value to be shown for <% Completed:> in the
display mask and in STATUS Occupation
Information. This is an indicator when to stop
the point occupation.
<Beep On Yes or No Activates that a beep is made when the point
STOP:> occupation is ended by <Auto STOP:>.
<Auto Yes or No Stores points automatically after stopping the
STORE:> point occupation.
<Beep On Yes or No Activates that a beep is made when the point is
STORE:> stored by <Auto STORE:>.
<End Available for <Pt Occupation: Normal>.
Survey:>
Manual Exits SURVEY when pressing ESC.
Automatically | Exits SURVEY automatically when pressing
STORE (F1) and returns to main menu.
Auto & Turn Off | Exits SURVEY automatically when pressing
STORE (F1) and turns receiver off.
Next step

IF parameters for | AND
«Auto STOP:>

THEN

ured

are not to be config-

CONT (F1) closes the screen and
returns to the screen from where

CONFIGURE Point Occupation

Settings was accessed.

are to be configured

<R-Time Mode: None» | PARAM (ЕЗ) changes to

CONFIGURE Post-Process Stop
Criteria. Refer to paragraph
"CONFIGURE Post-Process Stop
Criteria".

Config... Survey Settings...

GPS1200

109

CONFIGURE
Post-Process Stop
Criteria

110

IF parameters for | AND
«Auto STOP:»

THEN

are to be configured | <R-Time Mo

de: Rover>| PARAM (F3) changes to
CONFIGURE Real-Time Stop
Criteria. Refer to paragraph
"CONFIGURE Real-Time Stop
Criteria".

Description of fields

The parameters shown on this screen depend on the setting for <STOP Criteria:>
in CONFIGURE Point Occupation Settings.

Field Option Description
<Time at User input Sets the required observation time for each
Point:> point. Counting time starts when OCUPY (F1) is

pressed.

«Number of | User input
Obs:>

Sets the required number of observations that
should be recorded at each point. Counting
observations starts when OCUPY (F1) is
pressed.

«At Logging | Output
Rate:>

Displays the rate at which static raw observa-
tions are logged as configured in CONFIGURE
Logging of Raw Obs.

«n satellites | User input
for:>

Sets the required observation time depending
on the number of satellites available. Counting
time starts when OCUPY (F1) is pressed. The
receiver stops measuring when the set length of
time for a certain number of satellites is reached.
Should the number of available satellites
change during observation, the observations
already recorded will be taken into account.

Next step

Step |Description

1. CONT (F1) closes the screen.

2. CONT (F1) returns to the

screen from where CONFIGURE Point Occu-

pation Settings was accessed.

GPS1200

Config...\Survey Settings...

CONFIGURE Description of fields

Real-Time Stop The parameters shown on this screen depend on the setting for «STOP Criteria:
Criteria in CONFIGURE Point Occupation Settings.

Field Option Description

«Pos Quality <:> |Userinput | Sets the maximum position and height qualities

and
«Ht Quality <:>

for each point occupation. Calculating the quali-
ties starts when OCUPY (F1) is pressed. The
receiver stops measuring when the position and
height qualities are both less than the configured
values.

<Positions:> User input | Raw data is logged for a minimum number of
positions even when the <Pos Quality <:> and
<Ht Quality <:> is already less than the speci-
fied maximum.

<Position Output Displays the value for <Position and Screen

Update:> Update:> as configured in CONFIGURE
Display Settings.

<No. of Posi- User input | Sets the number the positions which must be

tions:> observed before the receiver stops measuring.

Next step

Step |Description

1. CONT (F1) returns to CONFIGURE Point Occupation Settings.

2. CONT (F1) returns to the screen from where CONFIGURE Point Occu-
pation Settings was accessed.

Config... Survey Settings...

GPS1200

111

112 GPS1200 Config...\Survey Settings...

18 Config...\Instrument Settings...

18.1 Antenna & Antenna Heights

Description

Access

CONFIGURE
Antenna & Antenna
Heights

The settings on this screen define the antenna and the default height for the

antenna.

Select Main Menu: Config...\iInstrument Settings...\Antenna & Antenna Heights.

Description of fields

Field Option Description

<Antenna:> | Choicelist Antennas in the receiver's System RAM or as
defined in Main Menu: Manage...\Antennas.

<Default Ht:> | User input Sets the default antenna height for the current
configuration. The antenna height can still be
changed during a survey. The change will not
update <Default Ht:> in the configuration.

<Vert Output The vertical antenna offset for the selected

Offset:> antenna.

<Meas Slope or Vertical | The way the antenna height will be measured.

Type:>

<Horiz Output Available for <Meas Type: Slope>. The hori-

Offset:> zontal antenna offset for the selected antenna.

«Moving Ht:>| User input Sets the default antenna height for auto points
and for the moving part of a track when logging
raw observations.

Next step

CONT (F1) returns to the screen from where CONFIGURE Antenna & Antenna
Heights was accessed.

Config... Mnstrument Settings...

GPS1200

113

18.2 Satellite Settings

Description

Access

CONFIGURE
Satellite Settings

114

The settings on this screen define which satellite system (available for GX1230 GG/
ATX1230 СС), satellites and satellite signals will be used by the receiver.

Select Main Menu: Config... Instrument Settings... Satellite Settings.

. v 7
оошсо Е < 90
Satellite Settings
Sat System ШИТИ
L2C Tracking : Automatic] ^ CONT (F1)
Cut Off Angle: 10 ° To accept changes and return to
Loss of Lock : Beep & Message 4 GPS1200 Main Menu.
SV Health : MNT HELTH (F4)
Suppros Wath: Automatics Available for <SV Health: User
ad Defined». To configure the satellites
CONT | | | HELTH| | | used in the survey.
Description of fields
Field Option Description
«Sat Available for GX1230 GG/ATX1230 GG.
System:> Defines the satellite signals accepted by the
receiver when tracking satellites.
GPS Only Only GPS satellites are tracked.
GPS & Glonass |GPS and GLONASS satellites are tracked.
<L2C Automatic or Available for GX1230 (serial numbe > 465000)/

Tracking:> |Always Track ATX1230 (serial number > 160000)/
GX1230 GG/ATX1230 GG.

Defines if the L2C signal will be tracked. The
recommended setting is Automatic.

<Cut Off User input Sets the elevation in degrees below which satel-
Angle:> lite signals are not recorded and are not shown
to be tracked. Recommended settings:

For real-time: 10°.

For purely post-processing applications: 15°.

<Loss of Beep & Activates an acoustic warning signal and a
Lock:> Message or Мо |message given by the receiver when satellites
Beep/Message are lost and therefore no position can be
computed.
«SV Health:> | Automatic Incoming satellite signals are monitored by the

receiver. Data from signals which are flagged as
unhealthy are neither recorded nor used for real-
time computations.

User Defined Satellites must manually be included/excluded
from data recording and real-time computations

with HELTH (F4).

GPS1200 Config... Instrument Settings...

Field

Option Description

«Suppress
MPath:>

Automatic or Available for GX1230 GG/ATX1230 GG.

Always On Defines if phase multipath mitigation techniques

will be used. The recommended setting is
Automatic.

Next step

CONT (F1) closes the screen and returns to GPS1200 Main Menu.

Config... Mnstrument Settings...

GPS1200

115

18.3 Time Zone

Description
Access

CONFIGURE
Local Time Zone

116

The settings on this screen help the receiver to quickly locate and track satellites.

Select Main Menu: Config... Instrument Settings.. Time Zone.

БИЯ & u- 7™ $ sw
CONFIGURE + 5 вот ШӘ] m zi
Local Time Zone

Time Zone : ZEE
Local Time : 13:14:42
Local Date : 04.11.03
CONT (F1)
maT To accept changes and to return to
CONT | | | | | | GPS1200 Main Menu.

GPS1200 Config...\Instrument Settings...

18.4 Instrument ID

Description The settings on this screen define the instrument identification number. This number
is used for the generation of the file names. Using format files, the instrument ID can
be output together with data from the instrument. This means that it can be identified
which instrument was used for certain measurements.

Access Select Main Menu: Config...\Instrument Settings... Instrument ID.
CONFIGURE Description of fields
Instrument ID
Field Option Description
«Instrument | User input Sets a four digit number as instrument identifica-
ID:> tion number. By default the last four numbers of
the serial number are used.
Next step

CONT (F1) returns to GPS1200 Main Menu.

Config... Mnstrument Settings...

GPS1200 117

118 GPS1200 Config... Instrument Settings...

19 Config...\General Settings...

19.1 Wizard Mode

Description The settings on this screen define the behaviour of the configuration set wizard.
Access Select Main Menu: Config...\General Settings...\Wizard Mode.
CONFIGURE SESE Фи Е? x’ S e
Wizard Mode CONFIGURE AE sz 8 208
izard Моде

Wizard Hode · АСЕ чу i

CONT (F1)
To accept changes and to return to
GPS1200 Main Menu.

LIST (F6)
To list all screens within a configura-
Та tion set. Allows to access these indi-
CONT | | | | | LIST | vidual screens and change settings.
Description of fields
Field Option Description
«Wizard View All All configuration screens are shown in the
Mode:> Screens configuration set wizard. Application program

configuration screens are not included. They
can be configured within each application
program.

Reduced A reduced set of screens are shown in the
configuration set wizard.

Next step
CONT (F1) returns to GPS1200 Main Menu.

Config... General Settings... GPS1200 119

19.2 Hot Keys & User Menu

Description The settings on this screen assign a particular function, screen or application
program to each of the first and second level of hot keys and to the USER key.

Access Select Main Menu: Config...\General Settings... Hot Keys & User Menu.
CONFIGURE Description of fields
Hot Keys & User
Menu Field Option Description
<F7:> to Choicelist Available on the Hot Keys page and the Shift
<F12:> Hot Keys page. All functions, screens or appli-
cation programs which can be assigned to the
particular key.
<1:> to <9:> | Choicelist Available on the User Menu page. All functions,
screens or application programs which can be
assigned to the individual lines in the user
defined menu.

Next step
PAGE (F6) changes to another page on this screen.

120 GPS1200 Config...\General Settings...

19.3

Description

Access

CONFIGURE
Units & Formats,
Units page

Units & Formats

The settings on this screen define
e the units for all types of measurement data displayed.

e information related to some types of measurement data.
e the order in which coordinates are displayed.

Select Main Menu: Config...\General Settings... Units & Formats.

Description of fields

Field Option Description
«Distance Metre (m), Int Ft | The units shown for all distance and coordi-
Unit:> (fi), Int Ft/Inch | nate related fields.

(fi), US Ft (ft),
US Ft/Inch (ft),
US Miles (mi) or
Kilometres (km)

«Distance Dec:>

From 0 Deci-
mals to 4 Deci-
mals

The number of decimal places shown for all
distance and coordinate related fields. This is
for data display and does not apply to data
export or storage.

«Angle Unit:>

400 gon, 360 ° '

The units shown for all angular and coordi-

"; 360° dec or nate related fields. More angle settings can
6400 mil be defined on the Angle page.
«Angle Dec:> Choicelist The number of decimal places shown for all
angular and coordinate related fields. This is
for data display and does not apply to data
export or storage.
«Grade Unit:> The input and output format for grades.
h:v Horizontal by vertical distance.
v:h Vertical by horizontal distance.
% (v/h * 100) Percentage of vertical by horizontal distance.
Elev Angle Elevation angle.

«Velocity Unit:> | Km/h (kmh), The units shown for all velocity related fields.
Mph (mph) or
Knots (kn)

m2, Int Acres
(Ai), US Acres
(A), Hectares
(ha), fi? or ft?

The units shown for all area related fields.

«Volume Unit:>

тз, fi?, ft? or yd?

The units shown for all volume related fields.

«Temp Unit:>

Celsius (°С) or
Fahrenheit (?F)

The units shown for all temperature related
fields.

Config... General Settings...

GPS1200

121

CONFIGURE
Units & Formats,
Angle page

CONFIGURE
Units & Formats,
Time page

CONFIGURE
Units & Formats,
Format page

122

Field

Option

Description

«Press Unit:>

mbar, mmHg,

hPa or psi

Inch Hg (inHg),

The units shown for all pressure related
fields.
PSI = pounds per square inch.

Next step

PAGE (F6) changes to the Angle page.

Description of fields

Field

Option

Description

North Azimuth,
South Azimuth,

Sets the reference direction as well as the direc-
tion from where and how azimuths are

North Anticlock | computed.
or Bearing
<Direc True or Sets the North direction.
Base:> Magnetic
<Mag User input Available for <Direc Base: Magnetic>.
Declin:> The value for the magnetic declination. It is
considered when computing or using any
azimuth values.
Next step

PAGE (F6) changes to the Time page.

Description of fields

Field Option Description
<Time 24 hour or 12 How the time is shown in all time related fields.
Format:> hour (am/pm)
<Date Day.Month.Year, | How the date is shown in all date related fields.
Format:> Month/Day/Year
or
Year/Month/Day
Next step

PAGE (F6) changes to the Format page.

Description of fields

Field Option Description
<Grid East,North or The order in which grid coordinates are shown in
Format:> North,East all screens. The order in display masks depends
on the user settings.
GPS1200

Config...\General Settings...

Field Option Description

<Geodetic Lat,Long or The order in which geodetic coordinates are
Format:> Long,Lat shown in all screens. The order in display masks
depends on the user settings.

Next step
PAGE (F6) changes to the first page on this screen.

Config...\General Settings... GPS1200 123

19.4 Language

Description The setting on this screen defines the language used on the instrument. Three
languages can be stored on the receiver at one time - English and two others.
English cannot be deleted.

Access Select Main Menu: Config... General Settings.. Language.
CONFIGURE Description of columns

Languages on

Instrument Field Description

Language The languages available on the receiver. The selected language is
used for the system software. If a language is not available for the
System software, the English language is used instead. Application
programs run in the language they were loaded.

Next step
CONT (F1) returns to GPS1200 Main Menu.

124 GPS1200 Config...\General Settings...

19.5 Display, Beeps, Text

Description

Access

CONFIGURE
Display, Beeps,
Text,

Display page

Config... General Settings...

The settings on this screen allow the screen appearance to be configured, turn the
notification beeps on and off and define the behaviour of the keys. The settings are
stored on the RX1200 itself. If RX1200's are exchanged, the settings stored on the
new RX1200 apply.

Select Main Menu: Config...\General Settings... Display, Beeps, Text.

42:25 —— Фи 1% Ф м
CONFIGURE Hi 8 a4] 5 at

Display, Beeps, TE

Display [Reeps]|Text

Touch Screen : DTE «>|

Screen Beep : 0f f «>|

Screen Illum : отер

Key Illum : Off < CONT (F1)

Contrast Eo 0% To accept changes and return to
Heating off 4 GPS1200 Main Menu.

mar CALIB (F5)

Field Option Description

«Touch On or Off Turns touch screen on and off.

Screen:>

<Screen Off, Soft or Loud | Controls the beep upon touching the touch
Beep:> screen.

<Screen Off, Always On, | Controls the screen illumination to be on, off or

Шит:> Onfor 1 min, On |on for the specified time after the last key was
for 2 тіп or On pressed, or touch screen event.

for 5 min

«Key Illum:> | Off, Same as
Screen or
Always On

Controls the keyboard illumination.

<Contrast:> |From 0% to Adjust the contrast level for the display with the
100% right and left arrow key when the field is high-
lighted or using the supplied stylus on the slider.

<Heating:> | Automatic The screen heating comes on automatically at
5°C and shuts off again at 7°C.
off The screen heating never comes on.
Next step

PAGE (F6) changes to the Beeps page.

GPS1200 125

CONFIGURE Description of fields
Display, Beeps,

Text, Field Option Description
Beeps page «Warning Off, Softor Loud | Controls the beep for acoustic warning signals.
Beeps:>
<Key Off, Soft or Loud | Controls the beep upon key presses on the
Beeps:> RX1200.
Next step
PAGE (F6) changes to the Text page.
CONFIGURE Description of fields
Display, Beeps, Е z РЕН
Text, Field Option Description
Text page <Defit Choicelist Sets the set of extra characters available
aNum:> through aNUM or F1-F6 whenever an entry is
made.
The choices available depend on the character
sets loaded on the instrument and the language
configured to be used on the instrument.
Next step

PAGE (F6) changes to the first page on this screen.

126 GPS1200 Config...\General Settings...

19.6

сае

Description

Access

CONFIGURE
Start Up & Power
Down,

Start Up page

CONFIGURE
Start Up & Power
Down,

Power Down page

Start Up & Power Down

Power Down is unavailable for a RX1250 with SmartAntenna.

The settings on this screen

* define the behaviour of the instrument for a general start up.
* define the behaviour of the instrument when starting up after a power loss.

* define a PIN code which needs to be typed in on starting up the receiver. A PIN
is a Personal Identification Number.

Select Main Menu: Config...\General Settings...\Start Up & Power Down.

Description of fields

Field Option Description

<Start Choicelist Determines the screen entered after turning on
Screen:> the receiver.

<Port 1:> Yes or No Determines if the receiver powers up when a
<Port 2:> pulse is received at one of the ports. The fields
<Port 3:> are unavailable for RX1250 with SmartAntenna.
Next step

PAGE (F6) changes to the Power Down page.

This page is not available for RX1250 with SmartAntenna.

Description of fields

Field

Option

Description

<Recovery:>

Sudden Loss
Only

Always

The receiver turns itself back on automatically
once power is restored after a sudden power
loss.

The receiver turns itself back on automatically
once power is restored after a sudden power

loss or after gradual power loss. The receiver
returns to the screen in which it was operating
when the power failed.

External A,
External B or
Automatic

Available for the GRX1200 Series where
batteries can be attached to port PWR with a Y-
cable. Sets the external battery which is always
used when sufficient power is available, regard-
less of the status of the other battery. Primary
power sources must provide a minimum voltage
of 11.4 V.

Config... General Settings...

GPS1200

127

Next step

PAGE (F6) changes to the PIN Code page.

CONFIGURE The appearance of the screen varies with the setting for «Use PIN:> when this
Start Up & Power Screen is accessed.
EIC Р «Use PIN: No» «Use PIN: Yes»
ode page Gee 4 Lt- ag Ж -% и EE Ry Li- 95 FE ^ o
CONFIGURE is 8 4] & pA CONFIGURE + i 8 & <a
Start Up & T UH [x] СЕТЕ TE: ur:
Start llp|Pnwer Dnwn|PTN finde E
Use PIN [M4 РІН Code hs
|
Ф|
01а? 01а т
CONT | | | | | PAGE | | CONT | | | | | PAGE |

Description of fields

Field Option Description

Use PIN Yes or No Activates the PIN code protection. This setting is
not part of the configuration set.

New PIN User input The PIN code must be a number with four to six

digits.

PIN Code User input

The PIN code as previously defined on this
page. The correct PIN code must be typed in
within five attempts or the PUK code is required.

Change PIN | Yes or No

Activates <New PIN:> to type in a new PIN
code.

Next step

PAGE (F6) changes to the first page on this screen.

128 GPS1200 Config...\General Settings...

20 Config...\Interfaces... - General

20.1 Overview

Description

Interface, port and
device

Access

CONFIGURE
Interfaces

Config...\Interfaces...

The receiver has a variety of interfaces which can be configured to be used with
different ports and devices. The configuration varies depending on the individual
application.

Description of the technical terms

Technical term |Description Example

Interface An interface should be considered as a function of | Real-Time
the receiver.

Port The physical port on the instrument which will be | Port P1
used for the interface functionality. It is sometimes
necessary to use particular ports with certain inter-
faces.

Device The hardware which is connected to the chosen Radio
port.

Select Main Menu: Config... Mnterfaces....

The screen gives an overview of all interfaces with the currently assigned port and

device. If a second real-time interface is configured it will also be shown.
WEXSBE Фи A А Mo P CONT (F1)

CONFIGURE 8 127 Ў 7AB To return to the screen from where

IEEE this screen was accessed.

AAE- EDIT (F3)
To configure the parameters related

ASCII Input

ME s : : to the highlighted interface. Refer to

Export Job : the sections on each individual inter-

Hidden Pt - face below.

Tiit - , CTRL (F4)

несео штат Available for certain devices

(F4)
Available for a real-time interface
configured to use a device of type
digital cellular phone or modem. To
dial the number of another station
configured in the active configuration
set and to hang up again.

- General GPS1200 129

130

Description of columns

Column

Option

Description

Port

1,20r3

BT x

Clip

NETx

The physical port P1, P2 or P3 on the instrument
which will be used for the interface functionality.

The Bluetooth port which will be used for the
interface functionality. Available for RX1250.

Clip-on-contacts on RX1250. It is used for
RX1250 with GHT56 when a device is attached
to the GHT56.

The logical NET port which will be used for the
interface functionality. Available for an activated
Internet interface.

Device

«Port x»

<Clip-on>

Default device for the physical ports P1, P2 and
P3.

Default device for the physical LEMO port on the
GHT56. It is displayed for RX1250 with GHT56
when <Port: Clip-on> is selected.

Next step

CONT (F1) returns to the screen from where this screen was accessed.

GPS1200

Config...\Interfaces... - General

20.2 Real-Time
20.2.1 Overview

Description The real-time interface allows real-time related parameters to be configured. This
includes defining if the receiver should work as a reference or a rover and the real-

time messages to be used. Up to two real-time interfaces can be configured on the
receiver.

Config...\Interfaces... - General GPS1200 131

20.2.2 Configuration without Real-Time Interface

Access Select Main Menu: Config... MInterfaces.... Highlight Real-Time. EDIT (ЕЗ).
CONFIGURE <R-Time Mode: None»? means the receiver is not to be used as a real-time refer-
Real-Time Mode ence or as a real-time rover.
Next step
IF a Space-Based | THEN
Augmentation
System
needs to be config- | SHIFT SBAS (F5) to access CONFIGURE SBAS Tracking
ured Mode.
does not need to be | CONT (F1) returns to the screen from where CONFIGURE
configured Real-Time Mode was accessed.
132

GPS1200 Config...\Interfaces... - General

20.2.3 Configuration of a Reference Real-Time Interface

Access

CONFIGURE
Real-Time Mode

Config... Mnterfaces...

Select Main Menu: Config... Interfaces.... Highlight Real-Time. EDIT (ЕЗ).

The available fields and keys on this screen depend on the selected settings.

NICO Фи Pu FE a м”
CONFIGURE Ф 8 12-8 zt

Real-Time Mode
R-Time Hode:

| CONT (F1)
To accept changes and return to the
Screen from where this screen was

mmm.

R-Time Data: Leica 4
Port - Port 14] accessed.
Device : Satelline 3AS REF (F2)

To configure additional settings rele-
vant to reference, e.g. time slicing.
RATES (F3)
Та To configure the data rates for the
CONT | REF |RATES| | DEVCE| | selected real-time data format.
SRCH (F4)
Available on RX1250 with <Port:
Bluetooth x> and a Bluetooth device
being selected. To search for all
available Bluetooth devices. If more
than one Bluetooth device is found a
list of available devices is provided.
DEVCE (F5)
Available unless <Port: NETx>. To
create, select, edit or delete a device.
SHIFT RT-2 (F2)
To accept the settings and configure
a second reference real-time inter-
face.
SHIFT SBAS (F5)
To configure the Space-Based
Augmentation System to be used.

Two real-time devices can be attached to two different ports, for example a radio and
a digital cellular phone. On the reference, the two devices can operate simultane-
ously. Press SHIFT RT-2 (F2) to configure a second real-time interface.

Description of fields

Field Option Description
«R-Time None, Refer- «R-Time Data: Reference» activates a refer-
Mode:> ence or Rover |ence real-time interface.
<R-Time Leica The proprietary Leica real-time GPS data
Data:> format. This is recommended when working
exclusively with Leica receivers.
CMR CMR and CMR? are compacted formats used to
CMR+ broadcast data for third party receivers.
- General GPS1200 133

Field

Option

RTCM v3

RTCM 1,2 v2

RTCM 9,2 v2

RTCM 18,19 v2

RTCM 20,21 v2

Description

Use RTCM when rover units from a different
manufacturer are to be used.

Message according to RTCM version 3. Higher
efficiency than RTCM v2.x. Supports real-time
services with significantly reduced bandwidth.
For real-time GPS operation and network oper-
ations according to Master-Auxiliary Concept.

Message according to RTCM version 2.x. Differ-
ential and delta differential GPS corrections.
Message 3 is also generated. Use for DGPS
applications. Accuracy at the rover: 0.25 - 1 m
rms.

Message according to RTCM version 2.x. GPS
partial correction set and delta differential GPS
corrections. Message 3 is also generated. Use
for DGPS applications with a slow data link in
the presence of interference. Accuracy at the
rover: 0.25 - 1 m rms.

Message according to RTCM version 2.x.
Uncorrected carrier phase and pseudorange.
Message 3 is also generated. Use for real-time
operations where the ambiguities will be
resolved at the rover. Accuracy at the rover:
1-5 cm rms after a successful ambiguity reso-
lution.

Message according to RTCM version 2.x. Real-
time carrier phase corrections and high-accu-
racy pseudorange corrections. Message 3 is
also generated. Use for real-time operations.
Accuracy at the rover: 1 - 5 cm rms after a
successful ambiguity resolution.

134

RTCM Message according to RTCM version 2.x.

1,2,18,19 v2 Combination of RTCM 1,2 v2 and RTCM 18,19
v2.

RTCM Message according to RTCM version 2.x.

1,2,20,21 v2 Combination of RTCM 1,2 v2 and RTCM 20,21
v2.

<Port:> Bluetooth x Available for RX1250. The Bluetooth port which
will be used for the interface functionality.

Clip-on Available for RX1250. The clip-on-contacts. It is
used for RX1250 with GHT56 when a device is
attached to the GHT56.

NETx Available for an activated Internet interface. If
these ports are not assigned to a specific inter-
face, then these ports are additional remote
ports.

GPS1200 Config...\Interfaces... - General

CONFIGURE
Additional Refer-
ence Options,
General page

Config... Mnterfaces...

Field

Option
Port x

Port 1

Description

The physical port P1, P2 or P3 on the instrument
to which the device is attached.

Available for RX1250. LEMO port on RX1250.

Next step

REF (F2) changes to CONFIGURE Additional Reference Options, General page.

Description of fields

Field

Option

Description

«Ref Stn ID:>

User input

An identification for a reference station. It is
converted into a compact format and sent out
with real-time data in all real-time data formats.
It is different from the point ID of the reference
station.

An ID of the reference station is required if
working with several reference stations in time
slicing mode on the same frequency. In this
case, the ID of the reference station from which
data is to be accepted must typed in at the rover.

Yes or No

The possibility to send real-time messages
delayed. This is required when real-time
messages from different reference stations are
sent on the same radio channel. Time slicing
works for all device types.

2,3or4

Available for «Time Slicing: Yes>.
The number of reference stations in use from
where real-time messages are sent.

«Time Slot:>

2,3or4

The contents of
the choicelist
depends on the
settings for

Available for «Time Slicing: Yes>.

The time slot represents the actual time delay.
The number of possible time slots is the number
of reference stations in use. The time delay
equals 1 s divided by the total number of refer-

«Used Ref ence stations.
Stations:>.
<End of Nothing or CR | To add a Carriage Return at the end of the real-
Message:> time message.
<RTCM 2.1, 2.2 or 2.3 Available for <R-Time Data: RTCM XX v2> in
Version:> CONFIGURE Real-Time Mode.
The same version must be used at the reference
and the rover.
Next step

PAGE (F6) changes to the NTRIP page.

- General

GPS1200

135

CONFIGURE
Additional Refer-
ence Options,
NTRIP page

CONFIGURE
Real-Time Data
Rates

136

Description of fields

Field Option Description
«Use Yes or No Activates NTRIP.
NTRIP:>
<Password:> | User input A password for authentication is required to
send data to the NTRIP Caster. Contact the
NTRIP administrator for information.
<Mountpnt:> | User input Identifies from where data is streamed to the
NTRIP Caster.
Next step
Step |Description
1: CONT (F1) closes the screen and returns to CONFIGURE Real-Time
Mode.
2. RATES (F3). Refer to paragraph "CONFIGURE Real-Time Data Rates".
Description

For all real-time data formats, parts of the message can be output at different rates.
The settings on this screen define the output rates for the various parts of the
selected real-time data format. The available fields on this screen depend on the
selected setting for <R-Time Data:> in CONFIGURE Real-Time Mode.

Description of fields

Field Option Description
<Data:> From 0.1s to Rates for the transmission of raw observations.
60.0s The default settings are suitable for standard
applications.
<Coords:> From 10s to Rate for the transmission of reference coordi-
120s nates.
<Messages:> | Choicelist Available for <RTCM Version: 2.3> in
CONFIGURE Additional Reference Options,
General page. The messages sent within the
coordinate message.
<Info:> From 10s to Rate for the transmission of reference station
120s information such as point ID.
<Msge Choicelist The message type of <R-Time Data: RTCM
Type:> v3». <Msge Type: Compact» is suitable for

standard applications.

GPS1200

Config...\Interfaces... - General

Next step

Step |Description

1. CONT (F1) closes the screen and returns to CONFIGURE Real-Time
Mode.

2. SHIFT RT-2 (F2) changes to CONFIGURE Real-Time Mode (2). Refer to
paragraph "CONFIGURE Real-Time Mode (2)".

CONFIGURE Description

Real-Time Mode (2) The second real-time interface is completely independent from the first one. All
settings can be configured differently. The port that is used must be different to the
first real-time interface.

Refer to paragraph "CONFIGURE Real-Time Mode" above for information on the
fields and keys. The difference is, that SHIFT RT-2 (F2) is replaced by SHIFT RT-1
(F2) and returns to CONFIGURE Real-Time Mode.

Next step
CONT (F1) accepts the changes, closes the screen and returns to the screen from
where CONFIGURE Real-Time Mode was accessed.

Config... Interfaces... - General GPS1200 137

20.2.4 Configuration of a Rover Real-Time Interface

Access

CONFIGURE
Real-Time Mode

138

Select Main Menu: Config... Interfaces.... Highlight Real-Time. EDIT (ЕЗ).

The available fields and keys on this screen depend on the selected settings.

ЕЕ e [ ot & Li- Ж FE m м” 230 CONT (F1)
CONFIGURE 9 To accept changes and return to the
screen from where this screen was

R-Time Mode:

R-Time Data: Leica {| accessed.

Port : Port 14] ROVER (F2)

Device : Satelline 3AS To configure additional settings rele-
Ref Sensor : 6Х1230 4» vant to rover operations. Available
Ref Antenna: AX1202 901230 unless а SBAS data format has been

selected for <R-Time Data».
[aT SRCH (F4)

CONT | ROVER| | | DEVcE| | Available on RX1250 with <Port:
Bluetooth x> and a Bluetooth device
being selected. To search for all
available Bluetooth devices. If more
than one Bluetooth device is found a
list of available devices is provided.

DEVCE (F5)
To create, select, edit or delete a
device. Available unless a SBAS data
format has been selected for <R-
Time Data>.

SHIFT PRED (F3)
To activate and deactivate the predic-
tion of real-time observations
between the data rate of the refer-
ence. Available unless <R-Time
Data: RTCM 1,2 v2> or <R-Time
Data: RTCM 9,2 v2>.

SHIFT FILT (F4)
To activate and deactivate the height
filter for height smoothing. Available
unless a SBAS data format has been
selected for <R-Time Data>.

SHIFT SBAS (F5)
To configure the Space-Based
Augmentation System to be used.
The configuration of SBAS deter-
mines the options available for <R-
Time Data:> in CONFIGURE Real-
Time Mode.

Two real-time devices can be attached to two different ports, for example a radio and
a digital cellular phone. Due to the nature of a rover, the two devices cannot operate
simultaneously. It is recommended to choose two different configuration sets, one

for each real-time device. Change the configuration set to change the active device.

GPS1200 Config...\Interfaces... - General

Description of fields

Field Option Description

«R-Time None, Refer- <R-Time Data: Rover? activates a rover real-
Mode:> ence or Rover |time interface.

<R-Time Leica Refer to "20.2.3 Configuration of a Reference
Data:> CMR/CMR+ Real-Time Interface" for information about these

RTCM v3 real-time data formats.

RTCM 1,2 v2

RTCM 9,2 v2

RTCM 18,19 v2

RTCM 20,21 v2
The availability of the following options depend
on the selection made for <SBAS Tracking:> in
CONFIGURE SBAS Tracking Mode.

WAAS/EGNOS/ | Wide Area Augmentation System

MSAS, EGNOS, | European Geostationary Navigation Overlay

WAAS, MSAS, Service

EGNOS (Test) or | MTSAT Satellite-based Augmentation System

WAAS (Test) where MTSAT stands for Multi-functional Trans-
port SATellite

<Port:> Bluetooth x Available for RX1250. The Bluetooth port which
will be used for the interface functionality.

Clip-on Available for RX1250. The clip-on-contacts. It is
used for RX1250 with GHT56 when a device is
attached to the GHT56.

NETx Available for an activated Internet interface. If
these ports are not assigned to a specific inter-
face, then these ports are additional remote
ports.

Port x The physical port P1, P2 or P3 on the instrument
to which the device is attached.

<ID Output Available on RX1250 with <Port: Bluetooth x>
Address:> and a Bluetooth device being selected.

The ID address of the SmartAntenna to be used.
<Ref Choicelist The receiver type used at the reference. If the
Sensor:> real-time data format does not contain the infor-

mation of the receiver type certain corrections

based on the information of the receiver type are
applied in order to provide correct results. The
real-time data formats Leica, CMR and CMR+
contain this information. This is mainly important
when a System300 receiver is used as refer-
ence.

Config...\Interfaces... - General GPS1200 139

CONFIGURE
Additional Rover
Options,

General page

140

Field Option Description

«Ref Choicelist The antenna used at the reference. If the real-
Antenna: time data format does not contain the informa-
tion of the antenna certain corrections based on
the information of the antenna are applied in
order to provide correct results. The real-time
data formats Leica, RTCM v2.3, CMR and
CMR¢ contain this information.

C= Ifthe reference data is corrected by
absolute antenna calibration values
anda Leica standard antenna is being
used on the rover, select ADVNUL-
LANTENNA as reference antenna.

Next step
ROVER (F2) accesses CONFIGURE Additional Rover Options, General page.

The available fields depend on the selected <R-Time Data:> in CONFIGURE Real-
Time Mode.

ОЕТ. & Ue p Fi ^o
CONFIGURE Hz ? 5 E
Additional — uri
,Reneral [NTRTP
Accept Ref : Any Кесе1уей СОМТ (Е1)
To accept changes and return to the
Ref Network : Nono 4 screen from where this screen was
Send User ID : No 4 accessed.
GGA (F4)
To activate the sending of a GGA
Тат message for reference network appli-
CONT | | | ббА | | PAGE | cations.
GETID (F5)

Available for «Accept Ref: User
Defined». To display and select the
station ID of the available reference
stations, the latency of the message
and the data format. When using
radios, the radio channel can be
switched and the stations received on
the new frequency are displayed.
1st (F6)
Available for «Accept Ref: First
Received». To force the system to
try to establish a new connection with
a different reference station.

GPS1200 Config...\Interfaces... - General

Description of fields

Field

Option

Description

«Accept
Ref:>

User Defined

First Received

Any Received

Incoming real-time data is accepted from the
reference station defined in <Ref Stn ID:>.

Incoming real-time data from the first recog-
nised reference station is accepted.

Incoming real-time data from any reference
station is accepted.

User input

Available for <Accept Ref: User Defined>.
The special ID of the reference station from
which real-time data is to be received.

None

Nearest

i-MAX

MAX

VRS

FKP

Defines the type of reference network to be
used.

To survey without reference station network.

The rover sends its position via NMEA GGA
message to LEICA GPS Spider. From this posi-
tion, LEICA GPS Spider determines the refer-
ence in a reference network that is closest to the
rover.

The rover sends its position via NMEA GGA
message to LEICA GPS Spider where the
Master-Auxiliary corrections are calculated. The
corrections are also individualsied by LEICA
GPS Spider, which means it determines the best
suitable corrections for that rover.

The rover typically does not send its position to
LEICA GPS Spider. LEICA GPS Spider calcu-
lates and sends Master-Auxiliary corrections to
the rover. The rover individualises the correc-
tions for its position, which means it determines
the best suitable corrections.

If this option is selected, a NMEA GGA message
must be activated using GGA (F4).

Area correction parameters.

Yes or No

Activates the sending of a Leica proprietary
NMEA message defining the user.

User input

Available for <Send User ID: Yes>.

The specific user ID’s to be sent as part of the
Leica proprietary NMEA message. By default
the serial number of the instrument is displayed.

1.x, 2.1, 2.2 or
2.3

Available for <R-Time Data: RTCM XX v2> in
CONFIGURE Real-Time Mode.

The same version must be used at the reference
and the rover.

Config...\Interfaces... - General

GPS1200

141

CONFIGURE
Additional Rover
Options,

NTRIP page

142

Field Option Description

«Bits / Вуќе:> 6 or 8 Defines the number of bits/byte in the RTCM
message being received.

Next step

PAGE (F6) changes to the NTRIP page.

Description of fields

Field Option Description
«Use Yes or No Activates NTRIP.
NTRIP:>

<User ID:> User input

A user ID is required to receive data from the
NTRIP Caster. Contact the NTRIP administrator
for information.

<(cont):> User input

Allows the <User ID:> string to continue onto a
new line.

<Password:> | User input

A password is required to receive data from the
NTRIP Caster. Contact the NTRIP administrator
for information.

<Mountpnt:> | User input

The NTRIP Source from where real-time data is
required. SRCE (F5) to download the NTRIP
Source table if <Mountpnt:> is unknown.

Next step

Step

Description

CONT (F1) returns to CONFIGURE Real-Time Mode.

CONT (F1) returns to the
Mode was accessed.

screen from where CONFIGURE Real-Time

GPS1200

Config...\Interfaces... - General

20.2.5 Configuration of SBAS

Description

Access step-by-
step

CONFIGURE
SBAS Tracking
Mode

Config...\Interfaces... - General

Allows a Space-Based Augmentation System to be configured to provide additional
corrections.

Step

Description

Refer to "20.2.1 Overview" to access CONFIGURE Real-Time Mode.

SHIFT SBAS (F5) to access CONFIGURE SBAS Tracking Mode.

Description of fields

Field Option Description
<SBAS The Space-Based Augmentation System to
Tracking:> use. The options available for <R-Time Data:>
in CONFIGURE Real-Time Mode depend on
the selection made here.
Automatic SBAS satellites will be tracked and the SBAS
SBAS service used will be automatically selected,
including MSAS.
WAAS, EGNOS Satellites of one of the following systems will be
or MSAS tracked:
Wide Area Augmentation System
European Geostationary Navigation Overlay
System
MTSAT Satellite-based Augmentation System
EGNOS (Test) |To track European Geostationary Navigation
Overlay System satellites while the system is
still in test mode.
WAAS (Test) To track Wide Area Augmentation System satel-
lites while the system is still in test mode.
Next step
Step |Description
1. CONT (F1) returns to CONFIGURE Real-Time Mode.
2. CONT (F1) returns to the screen from where CONFIGURE Real-Time
Mode was accessed.

GPS1200

143

20.2.6 Configuration of GGA Message Sending for Reference
Network Applications

Description

Access step-by-
step

CONFIGURE
Send GGA NMEA

144

Most reference networks require an approximate position of the rover. For reference
network applications, a rover dials into the reference network and submits its approx-
imate position in form of a NMEA GGA message.

Step |Description

15 Select Main Menu: Config...\Interfaces....

2. Highlight Real-Time.

3. EDIT (F3)

4 CONFIGURE Real-Time Mode

«R-Time Mode: Rover»

ROVER (F2) to access CONFIGURE Additional Rover Options.
6. GGA (F5) to access CONFIGURE Send GGA NMEA.

ИРАН ЕЕЕ HE NET И $ E

CONFIGURE B

CONT (F)

GGA Position : MEST TEEN 41 To accept changes and return to the
screen from where this screen was
accessed.

Easting : 760300.364 п COORD (F2)

Northing : 254925.548 n Available for «GGA Position: From

Local E11 Ht : 455.948 u Job» and <GGA Position:

Available for <GGA Position:
LAST/HERE Posn>. To use the
same coordinates in the GGA
message as when the receiver was
last used in a reference network
application.

HERE (F4)
Available for <GGA Position:
LAST/HERE Posn>. To use the
coordinates of the current navigation
position in the GGA message.

SHIFT ELL H (F2) and SHIFT ORTH (F2)
Available for local coordinates. To
change between the ellipsoidal and
the orthometric height.

GPS1200 Config...\Interfaces... - General

Description of fields

Field Option Description

<GGA Posi- | Automatic The current rover position is sent to the refer-

tion:» ence network.

From Job For the position, a point from the active job can
be selected in «Point ID:>.

LAST/HERE The position last used in a reference network

Posn application or the current navigation position
can be selected using LAST (F3) or HERE (F4).

None No GGA message is sent to the reference
network.

«Point ID:» | Choicelist Available for «GGA Position: From Job».
The coordinates of this point are sent out as
position in the GGA message.

Next step

Step |Description

1. CONT (F1) returns to CONFIGURE Additional Rover Options.

2. CONT (F1) returns to CONFIGURE Real-Time Mode.

3. CONT (F1) returns to the screen from where CONFIGURE Real-Time
Mode was accessed.

Config...\Interfaces... - General

GPS1200

145

20.3 Hidden Point

Description

са

Ассеѕѕ
CONFIGURE

Hidden Point Meas-
urements

146

Hidden point measurement devices are used for measuring to points which cannot
be directly measured with GNSS, for example house corners or trees. The measure-
ments made with a hidden point measurement device are directly transferred to the
receiver for the calculation of the coordinates of the hidden point. They can also be
entered manually.

The configuration of hidden point measurements is possible for <R-Time Mode:
Rover? and <R-Time Mode: None» in CONFIGURE Real-Time Mode.

Select Main Menu: Config... Mnterfaces.... Highlight Hidden Pt. EDIT (ЕЗ).

42:04 — — ee Ф: du Pie E м” E CONT (F1)
8

RU M a й. Ў РАВ To accept changes and return to the
idden Poin M E :

Deflt Hethod METRO Imm Screen from where this screen was

Est Pos Qity : 0.300 n асе сей,

Compute Ht : Yes {| OFSET (F2)

Est Ht Qity : 0.300 n To configure the heighting and

Use Device : Yes 4» external angle offsets.

Port : Port 34 SRCH (F4)

Dorice =. Locator f Vector Available on RX1250 with «Port:

[iat Bluetooth x> and a Bluetooth device

available Bluetooth devices. If more
than one Bluetooth device is found a
list of available devices is provided.

DEVCE (F5)
To create, select, edit or delete a
device.
Description of fields
Field Option Description
<Compute Yes or No To compute a hidden point with height.
Ht:>
<Est Pos User input The estimated value for the position quality
Qity:> assigned to all hidden points.
<Est Ht User input Available for <Compute Ht: Yes>.
Qity:» The estimated value for the height quality
assigned to all hidden points.
«Use Yes or No Activates the hidden point interface. For «Use
Device:> Device: No>, the measured values must be
entered manually.
<Port:> Bluetooth x Available for RX1250. The Bluetooth port which
will be used for the interface functionality.
Port x The physical port P1, P2 or P3 on the instrument
to which the device is attached.

GPS1200 Config...\Interfaces... - General

CONFIGURE
Hidden Pt Device
Offsets

Field

Option
Port 1

Description
Available for RX1250. LEMO port on RX1250.

Next step

OFSET (F2) to access CONFIGURE Hidden Pt Device Offsets.

Description of fields

Field

Option

Description

«Height
Offset:>

None

Device Ht

Device & Trgt Ht

No height offsets are used. The result is the
delta height between the centre of the device
and the aimed point.

When measuring hidden points, the height of the
hidden point measurement device can be typed
in. This option should be used when the hidden
point can be directly measured using the hidden
point device.

When measuring hidden points, the height of the
hidden point measurement device as well as the
target height can be typed in. This option should
be used when the hidden point cannot be
directly measured with a hidden point device but
a target point can be used to calculated the posi-
tion of the hidden point.

User input

The height of the hidden point measurement
device. This is the distance from the ground to
the centre of the device.

User input

The distance from the hidden point to the aimed
point.

User input

The offset is automatically added to the meas-
ured distance.

None

Permanent

New for Each Pt

Sets the default method for entering an External
Angle Offset. EAO is an offset angle between
the North of the device being used and

WGS 1984 geodetic North. EAO’s are applied
when measuring hidden points using a device
capable of measuring azimuths.

No EAO value is applied to the azimuth meas-
urement received from the hidden point meas-
urement device.

Applies a default value for the offset angle. The
value is changeable.

Offset angle values must be entered for each
new hidden point.

<Offset:>

User input

Available for <EAO Method: Permanent>.
The default value for the offset angle.

Config...\Interfaces... - General

GPS1200

147

Next step

Step |Description
1. CONT (F1) returns to CONFIGURE Hidden Point Measurements.

2. CONT (F1) returns to the screen from where CONFIGURE Hidden Point
Measurements was accessed.

148 GPS1200 Config...\Interfaces... - General

20.4 SmartAntenna

Description

сае

Establish connec-
tion automatically

Access

CONFIGURE
SmartAntenna
Interface

Config... Mnterfaces...

The SmartAntenna interface is used to send the measurement data from the Smar-
tAntenna to the RX1250.

The settings on this screen define the port and the device through which a connec-
tion to the SmartAntenna should be established.

The configuration of a SmartAntenna interface is only possible for RX1250.

Automatic connection

Establishing a connection is initiated automatically upon
switching on RX1250.

double clicking the icon ү on Windows CE desktop to display the Leica soft-
ware.

Requirements

The SmartAntenna interface is configured such that SmartAntenna is being
used via Bluetooth.

AND
An «ID Address:> is available.
AND
A SmartAntenna is found that matches «ID Address:> configured. This can be
the last used «ID address:>.
If one of these requirements is not fulfilled, a search for a SmartAntenna is
performed.

Select Main Menu: Config... Mnterfaces.... Highlight SmartAntenna. EDIT (ЕЗ).

Ша: ИЕЫ lost kpi x FE La PL CONT (F1)

CONFIGURE
БОТА Conia BOE ul To accept changes and return to the

Use Device ` Үе screen from where this screen was
accessed. To establish a connection

Port : Bluetooth 14] to the SmartAntenna.

Device : ATX1230

ID Address : 80371d9b13 SRCH (F4)

Available for <Use Device: Yes». To
search for all available SmartAn-
tenna's. If more than one SmartAn-

Available for <Use Device: Yes». To
create, select, edit or delete a device.

Description of fields

Field Option Description
«Use Yes or No Activates the SmartAntenna interface.
Device:>
- General GPS1200 149

150

Field

Option

Description

<Port:>

Bluetooth x

Port 1

Port to which the SmartAntenna will be
connected.

The Bluetooth port which will be used for the
interface functionality. Enables cablefree
communication between the SmartAntenna and
the RX1250.

LEMO port on RX1250. To be selected when
RX1250 and SmartAntenna are connected via
USB cable.

<Device:>

Output

The device that is currently configured to
<Port:>.

The Bluetooth device inside the RX1250 that is
currently configured to <Port:>.

<ID

Address:>

Output

The ID address of the SmartAntenna to be used.

Next step

CONT (F1) returns to the screen from where CONFIGURE SmartAntenna Inter-
face was accessed. A connection to the SmartAntenna is established.

GPS1200 Config...\Interfaces... - General

20.5 Internet

Description

Access

CONFIGURE
Internet Interface

The Internet interface

* allows accessing the Internet using a GPS1200 receiver plus a GPRS ог СОМА
device.

e canbe used together with the Real-Time interface to receive real-time data from
a NTRIP Caster via Internet communication.

Select Main Menu: Config... Interfaces.... Highlight Internet. EDIT (ЕЗ).

Hips ps ky Lt- 6 osa
CONFIGURE los 8 5 LJ AU
Internet qm

Internet
Port : Port 1 4] СОМТ (Е1)
Device : Sicmens МС45
To accept changes and return to the
IP Address: Dynamic 4| screen from where this screen was
F ip 123 accessed.
ser :
(cont) PUE ., DEVCE (F5) |
Ота? To create, select, edit ог delete а
CONT | | | | DEVCE| | device.
Description of fields
Field Option Description
<Internet:> | Yes or No Activates the Internet interface.
<Port:> Bluetooth x Available for RX1250. The Bluetooth port which
will be used for the interface functionality.
Port x The physical port P1, P2 or P3 on the instrument
to which the device is attached.
Port 1 Available for RX1250. LEMO port on RX1250.
«IP Dynamic Each time a GPS1200 receiver wants to access
Address:> the Internet via the device a new IP address is

assigned to the receiver. When using GPRS to
connect to the Internet then the network provider
always dynamically assigns the IP address.

Static Each time GPS1200 wants to access the
Internet via the device the same IP address
identifies the receiver. This is important if
GPS1200 is used as a TCP/IP server. This
option should only be selected if a static IP
address is available for the receiver.

«Set IP Adr:>| User input Available for «IP Address: Static». To set the
IP address.

- General GPS1200 151

Config... Mnterfaces...

152

Field Option Description

<User ID:> User input Some providers ask for a user ID to allow
connecting to the Internet via GPRS or CDMA.
Contact your provider if a user ID needs to be
used.

<(cont):> User input Allows the <User ID:> string to continue onto a
new line.

<Password:> | User input Some providers ask for a password to allow

connecting to the Internet via GPRS or CDMA.
Contact your provider if a password is required.

Next step

CONT (F1) returns to the screen from where CONFIGURE Internet Interface was

accessed.

GPS1200 Config...\Interfaces... - General

21 Configuration of Devices

21.1 Overview

Description A device is the hardware which is connected to a chosen port of GPS1200. Devices

are used to transmit and receive real-time data and to communicate with the
receiver.
Before using any device it is necessary to configure the interface with which it will be
used. Some devices may be used with different interfaces for different applications.
For example, a radio can be used to receive real-time reference data but a second
radio could also be used to simultaneously output NMEA messages.

Configuration of Devices GPS1200 153

21.2 Accessing CONFIGURE Devices / GPRS Internet Devices

Description Allows devices to be created, edited, selected and deleted. Refer to "22
Config.. Mnterfaces... - Controlling Devices" for more information about configuring
devices.

Access step-by- Step |Description

step

1. Main Menu: Config... Mnterfaces...

2. Highlight the appropriate interface based on the type of device that needs
to be configured. For example, highlight Real-Time when a radio is to be
configured.

EDIT (F3) to access CONFIGURE XX.

4. DEVCE (F5) to access CONFIGURE Devices / CONFIGURE GPRS
Internet Devices.

CONFIGURE This screen may consist of several pages and provides different devices for selec-
Devices; tion depending on which interface the screen was accessed from. The functionality
CONFIGURE described below is always the same.

GPRS Internet 4t580 Sie 23 "E vg

Devices CONFIGURE н 5 7 BoA a CONT (F1)

Devices

Selina ттуу To select the highlighted device and

return to the screen from where this
screen was accessed.

AT-RXH500
Intuicom 1200 DL

AT-RXH500 +
Pac Crest PDL

To display information about the type
of device and the creator of the
device.

SHIFT DEFLT (F5)
To recall previously deleted default
devices and to reset default devices
to the default settings.

Description of columns

Column Description

Name Names of available devices.

Type Type of device defined when creating the device.

Creator The creator of the device. The creator can either be Default if the

device is a default, or User if the device has been created.

Cg If a Default device is edited by using EDIT (F3) then its
creator is still displayed as Default.

154 GPS1200 Configuration of Devices

Next step
CONT (F1) closes the screen and returns to the screen from where CONFIGURE
Devices / CONFIGURE GPRS Internet Devices was accessed.

Configuration of Devices GPS1200 155

21.3 Creating a New Device / Editing a Device

Access step-by-
step

сае

CONFIGURE
XX Device

156

Step |Description

1. Refer to "21.2 Accessing CONFIGURE Devices / GPRS Internet Devices"
to access CONFIGURE Devices / CONFIGURE GPRS Internet
Devices.

2. In CONFIGURE Devices / CONFIGURE GPRS Internet Devices high-

light a device of the same type as the device to be created, from the list.

3. NEW (F2)/EDIT (F3) to access CONFIGURE New Device/CONFIGURE
Edit Device.

Editing a device is similar to creating a new device. For simplicity, the screens are
called CONFIGURE XX Device and differences are clearly outlined.

Ses а FED D EB ъ м d

CONFIGURE 7 12:7 Boas
New Device
Name : New Radio
Type : ба+е1 3AS/3ASd STORE (F1)
Baud Rate : 9600 4» To store the new device and to return
Parity : None {| to the screen from where this screen
e Bits - T was accessed.
op Bi à
Flow Control : RTS/CTS {| ATCMD (F4) 2.
Available for digital cellular phones
[aT and modems. To configure commu-
STORE| | | | | | nication commands.

Description of fields

Field Option Description

<Name:> User input Available when creating a new device. Name of
new device.

Output Available when editing a device. The name of

the device.

<Type:> Output The type of device.

<GRPS/ Yes or No Available for digital cellular phones and

Internet:> modems. Defines the device as an Internet

capable device and adds it to the list in
CONFIGURE GPRS Internet Devices.

<Baud From 2400 to Frequency of data transfer from receiver to
Rate:> 115200 device in bits per second.
<Parity:> None, Evenor | Error checksum at the end of a block of digital
Odd data.
<Termi- Available when editing a device and if required
nator:> by the interface.
CR/LF The terminator is a carriage return followed by a
line feed.

GPS1200 Configuration of Devices

Field Option
CR

Description

Not available for RS232 device. The terminator
is a carriage return.

«Data Bits:> 6, 7 ог8

Number of bits in a block of digital data.

«Stop Bits:> |10r2

Number of bits at the end of a block of digital
data.

«Flow None or
Control:> RTS/CTS

Activates hardware handshake.

Next step

IF the device is a

THEN

radio or device other than digital
cellular phone or modem

STORE (F1) to close the screen and to return to
the screen from where CONFIGURE XX Device
was accessed.

digital cellular phone or modem

ATCMD (F4). Refer to paragraph "CONFIGURE
GSM/Modem AT Command Lines".

CONFIGURE For <GPRS/Internet: Yes> in CONFIGURE XX Device, this screen consists of two
GSM/Modem AT pages. The following table lists the fields of both pages.
Command Lines Description of fields
Field Option Description
<Init 1:> User input Initilisation sequence to initilise digital cellular
phone/modem.
<(cont):> User input Allows the <Init X:> or the <Connect:> string to
continue onto a new line.
<Init 2:> User input Initilisation sequence to initilise digital cellular
phone/modem.
<Dial:> User input Dialing string used to dial the phone number.

<Hangup:> |User input

Hangup sequence used to end the network
connection.

<Escape:> User input

Escape sequence used to switch to the
command mode before using the hangup
sequence.

<Connect:> | User input

Dialing string used to dial into the Internet.

When the device is used, between <Init 1:> and <Init 2:>, a check for the PIN is

performed.

Next step

Step |Description

1. STORE (F1) returns to CONFIGURE XX Device.

Configuration of Devices GPS1200 157

158

Step

Description

STORE (F1) returns to the screen from where CONFIGURE XX Device
was accessed.

GPS1200 Configuration of Devices

22 Config...\lnterfaces... - Controlling Devices

22.1 Accessing Config... Interfaces... - Controlling Devices

Access step-by-

step Step |Description
1. Main Menu: Config...\Interfaces... to access CONFIGURE Interfaces.
2. In CONFIGURE Interfaces highlight an interface which has the device
attached that needs to be configured.
3. CTRL (F4) to access CONFIGURE XX Connection/CONFIGURE Radio
Channel.
Config... Mnterfaces... - Controlling GPS1200 159

Devices

22.2 Digital Cellular Phones

Description

Access

CONFIGURE
XX Connection

160

For digital cellular phones, information such as

* the reference stations that can be contacted

* the phone numbers of the reference stations and
* the type of protocol to be used

can be defined.

Refer to "22.1 Accessing Config.. Mnterfaces... - Controlling Devices" to access
CONFIGURE XX Connection.

The name of the screen depends on the type of technology of the digital cellular
phone chosen in CONFIGURE Interfaces.

APA Bp Фи vr a’ = м”
CONFIGURE ie v ? zt

| CONT (F1)
To accept the change and to

GSH Type : Manufact HodelId >
continue with the subsequent
Station ЕТТ ѕсгееп.
Number > 0041717273137 NEAR (F2)
Preteco] | tea Available when reference stations to
Auto CONEC : No | dial are already created in
CONFIGURE Stations to Dial. To
Net Data Rate: 98600bps |” | : :
[Тат find the nearest reference station
CONT | NEAR |CODES| | | | with a digital cellular phone.
CODES (F3)

Available for digital cellular phones of
GSM technology. To enter the
Personal Identification Number of the
SIM card.

SRCH (F4)
Available for <Bluetooth: Yes>. To
search for all available Bluetooth
devices.

SHIFT INFO (F2)
Available for CDMA digital cellular
phones. To find out information
about the digital cellular phone. All
information can be printed to a file
CDMA Info.log in the \DATA direc-
tory on the CompactFlash card.

SHIFT REG (F3)
Available for CDMA digital cellular
phones. To register the digital
cellular phone.

SHIFT CMND (F4)
To send AT commands to the digital
cellular phone.

GPS1200 Config... Interfaces... - Controlling
Devices

Description of fields

Field

Option

Description

Output

Available for digital cellular phones of GSM
technology. The type of digital cellular phone
highlighted when CONFIGURE XX Connection
was accessed.

Output

Available for digital cellular phones of CDMA
technology. The type of digital cellular phone
highlighted when CONFIGURE XX Connection
was accessed.

<Bluetooth:>

Yes or No

GPS1200 receivers detect automatically if the
attached device is bluetooth capable. Some
devices ask for the identification number of the
Bluetooth. The identification number of Leica’s
Bluetooth is 0000. The field is unavailable for
RX1250 with SmartAntenna.

«ID
Address:

User input

Available for «Bluetooth: Yes». The ID address
of the Bluetooth device to be used. Refer to the
device's user manual for information about the
ID address.

<Station:>

Choicelist

The digital cellular phone reference station to be
dialed. Opening the choicelist accesses
CONFIGURE Stations to Dial where new refer-
ence stations can be created and existing refer-
ence stations can be selected or edited.

<Number:>

Output

The number of the digital cellular phone at the
selected <Station:> as configured in
CONFIGURE Stations to Dial.

<Protocol:>

Output

Available for digital cellular phones of GSM
technology. The configured protocol of the
digital cellular phone at the selected <Station:>
as configured in CONFIGURE Stations to Dial.

Yes or No

Allows for automatic connection between the
rover and the reference when a point is occu-
pied during a survey.

Autobauding,

2400 bps to
56000 bps

Available for digital cellular phones of GSM
technology. The network baud rate. Select
Autobauding for an automatic search of the
network baud rate. For digital cellular phones of
GSM technology that do not support auto-
bauding choose the baud rate from the
choicelist.

<Connec-
tion:>

Config...\Interfaces... - Controlling

Transparent

GPS1200

Available for digital cellular phones of GSM
technology. Define if the digital cellular phone
uses Radio Link Protocol.

For digital cellular phones that do not use RLP.

161

CONFIGURE

CDMA Registration

162

Field

Option

Non-Trans-
parent

Description

For digital cellular phones that use RLP.

Next step

IF the digital cellular phone is

THEN

not of type CDMA or does not
need to be registered

CONT (F1) to accept the change and to
continue with the subsequent screen.

tering

of type CDMA and needs regis-

SHIFT REG (F3) to access CONFIGURE
CDMA Registration. Refer to paragraph
"CONFIGURE CDMA Registration".

Description of fields

Field Option Description
«Prog User input The service program coder provided by the
Code:> network provider.
«My Phone | User input Type in the mobile directory number provided by
No:> the network provider.
Next step
Step |Description
1. CONT (F1) returns to CONFIGURE Interfaces.

2. CONT (F1) returns to the screen from where CONFIGURE Interfaces
was accessed.

GPS1200

Config... Interfaces... - Controlling
Devices

22.3 Radios

Description

Access

сае

CONFIGURE
Radio Channel

Config... Mnterfaces...

Devices

For radios the channels on which the radio broadcasts can be changed. Changing
channels changes the frequency at which the radio operates.

Refer to "22.1 Accessing Config... Mnterfaces... - Controlling Devices" to access
CONFIGURE Radio Channel.

Channel changing may contravene radio broadcasting regulations in certain coun-
tries. Before operating with radios, check the regulations in force in the working area.

If channel changing is to be used, when configuring the reference real-time interface,
set «Ref Stn ID:» in CONFIGURE Additional Reference Options, General page
to a different ID for each reference site. By doing so, the rover can recognise if the
incoming real-time data after channel changing is being received from a different
reference station or if the original reference station is using a new frequency. In the
first case, the ambiguities are recomputed.

Se Га Е H$ SW * v aL
8

CONFIGURE B CAE
CONT (F1)
Radio Type : Satelline 3AS To accept the changes and to
Channel : continue with the subsequent
Actual Freq : 433.525 MHz Screen.
SCAN (F5)

To find out information such as the
station ID, latency and the data

[uat format of incoming signals from
CONT | | | | SCAN | | reference stations.
Description of fields
Field Option Description
<Radio Output The type of radio highlighted when
Type:> CONFIGURE Radio Channel was accessed.
<Channel:> ! User input The radio channel. The minimum and maximum

allowed input values for a radio depend on the
number of channels supported by the radio and
the spacing between the channels.

<Actual Output Available for <Radio Type: Satelline 3AS>.
Freq:> Displays the actual frequency of the radio.
- Controlling GPS1200 163

22.4 Hidden Point Measurement Devices

Description Hidden point measurement devices can be used to measure distances, angles and
azimuths to points which are not accessible by means of GPS. A Bluetooth housing
can be used to provide a wireless connection between the receiver and a Bluetooth
enabled hidden point measurement device.

Access Refer to "22.1 Accessing Config.. Mnterfaces... - Controlling Devices" to access
CONFIGURE RS232 Connection.

CONFIGURE 11:40 ЕЕ Mp 4 Ut- d H * vae a

RS232 Connection CONFIGURE 8 % CAD
RS232 Connection
Device RS232 CONT (F1)
Bluetooth : Yes

To accept the changes and to
continue with the subsequent
screen.
SRCH (F4)
Available for «Bluetooth: Yes». To
Таж search for all available Bluetooth
CONT | | | SRCH | | | Чемїсез.

ID Address NENENENNNEEPER

Description of fields

Field Option Description

«Type: Output The type of hidden point measurement device
highlighted when CONFIGURE RS232
Connection was accessed.

<Bluetooth:> | Output GP$S1200 receivers detect automatically if the
attached devices is bluetooth capable. Some
devices ask for the identification number of the
Bluetooth. The identification number of Leica's
Bluetooth is 0000. The field is unavailable for
RX1250 with SmartAntenna.

«ID User input Available for «Bluetooth: Yes». The ID address
Address: of the Bluetooth device to be used. Refer to the
device's user manual for information about the
ID address.
164 GPS1200 Config...\Interfaces... - Controlling

Devices

22.5 GPRS / Internet Devices

Description

Access

CONFIGURE
GPRS/Internet
Connection

Config...\Interfaces...

Devices

GPRS / Internet devices can be used to access the Internet from a GPS1200
receiver.

Refer to "22.1 Accessing Config...\Interfaces... - Controlling Devices" to access
CONFIGURE GPRS/Internet Connection.

31:38 ee Fu T RETS, H y apr CONT (F1)
8

hee TUS ^ To accept the changes and to

EIE Ee E eset

сс —— : — HodelId continue with the subsequent
Screen.

APN es CODES (F3)

(cont) Stn Available for digital cellular phones of
GSM technology. To enter the
Personal Identification Number of the
SIM card. If the PIN is locked for any

Тат reason, input the Personal

CONT | | CODES| | UnblocKing code for access to the

PIN.
SRCH (F4)

Available for <Bluetooth: Yes>. To
search for all available Bluetooth
devices.

SHIFT CMND (F4)
To send AT commands to the GPRS
/ Internet device.

Description of fields

Field Option

<Device:> Output

Description

The type of GPRS / Internet device highlighted
when CONFIGURE GPRS/Internet Connec-
tion was accessed.

«Bluetooth: | Output GPS1200 receivers detect automatically if the
attached device is bluetooth capable. Some
devices ask for the identification number of the
Bluetooth. The field is unavailable for RX1250

with SmartAntenna.

Available for <Bluetooth: Yes>. The ID address
of the Bluetooth device to be used. Refer to the
device’s user manual for information about the
ID address.

Available for some GPRS / Internet devices. The
Access Point Name of a server from the network
provider, which allows access to data services.
Contact your provider to get the correct APN.
Mandatory for using GPRS.

<APN:> User input

- Controlling GPS1200 165

22.6 Creating a New Station to Dial/Editing a Station to Dial

Description

Access step-by-
step

сае

CONFIGURE
XX Station to Dial

166

CONFIGURE Stations to Dial allows new stations to be created, provides a list of
reference stations that can be dialed a
…[truncated]

Related across Profoundd

Oregon Climate Docs

Grants Pass — Sustainability and Energy Action Plan p.97
IMPLEMENTATION GRANTS PASS SUSTAINABILITY AND ENERGY ACTION PLAN The granularity needed is one record per month per service meter or location, which matches the billing cycle of most service providers. For fueling, the…
Ashland — Climate and Energy Action Plan (CEAP) p.136
CLIMATE TRENDS & PRO JECTIONS | CITY OF ASHLAND, OREGON | FINAL REPORT | 7 Overview Temperature in Ashland increased significantly over the historical period while trends in precipitation we re less clear. All m…
Medford — Climate-Friendly Areas Evaluation Report p.22
Medford Climate Friendly Area Study – Evalua Ɵon of Candidate Loca Ɵons Revised December 2023 22 Calculating the existing developed land, redevelop able land, and vacant land together, yields the following poten…

WEF Publications

Unmasking Cybercrime Strengthening Digital Identity Verification against Deepfakes 2026 p.12
Injection method classification Three injection approaches were observed and used to classify the evaluated tools: • App-level injection: Four tools performed injection by intercepting camera application programming i…
GGGR 2023 p.69
Population sex ratio (female/male), % Ratio of the number of females (thousands) to males (thousands) in the population of a society. World Bank staff estimates based on age/sex distributions of United Nations Popula…
Future of Jobs Report 2025 p.2
Terms of use and disclaimer World Economic Forum 91-93 route de la Capite CH-1223 Cologny/Geneva Switzerland Tel.: +41 (0)22 869 1212 Fax: +41 (0)22 786 2744 E-mail: [email protected] www.weforum.org Copyright ©…

Epstein Files

EFTA01216493 — EFTA01216493
User Guide EFTA01216493 © Copyright 2017 HP Development Company. Bluetooth Is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the …
EFTA00087806 — All Details
All Details Case Details Contact Details Case Assets Case Collection Evidence Details Case Photographs Case Disposal Forensic Hardware and Sofware 0453 Report Produced : 02/21/2020 12:22:37 Produced By : Forensic Hardwar…
EFTA01225142 — SOFTWARE HOUSE From Tyco Security Products
SOFTWARE HOUSE From Tyco Security Products C•CURE 9000 Version 2.50 11,303C0 EFTA01225142 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed …

Federal Writers' Project

[Connecticut Clockmakers]
Francis Donovan Thomaston, Connecticut May 12, 1939. CONNECTICUT CLOC+AICERS From the simple dignity of Colonial style to the stream- lined designs of modern age; from the painstaking, leisurely methods of craftsmen.‘who…
[Occupational and Medical Lore]
Accession no. /3 g di Date received e Consignment no. Shipped from Label Amount //1" WPA L. C. PROJECT UNIT Form -3 Collection (or Type) Title Place of origin Project worker Project editor editor Remarks Date //,/9_, Fo…
[W. G. Leonard]
Spokane, Washington January 20, 1937 Personal Narrative W. G. Leonard. A personal narrative by W. G. Leonard, Carlyle Hotel, Spokane, based on his experience and that of his father the late Frederick Charles Leonard (185…