Apple TV/FM Tuner Card User Manual

Collection

Survival, Water, Medical Field Manuals

Case

Military Manuals

Sub-case

Apple

Download PDF ↗ Live URL (may be dead)

Document text

Apple

TWEM Radio

User’s Manual

@ Apple Computer, Inc.
© 1996 Apple Computer, Inc. All rights reserved.

Under the copyright laws, this manual may not be copied, in whole or in part, without
the written consent of Apple. Your rights to the software are governed by the
accompanying software license agreement.

The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and
other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial
purposes without the prior written consent of Apple may constitute trademark
infringement and unfair competition in violation of federal and state laws.

Every effort has been made to ensure that the information in this manual is accurate.
Apple is not responsible for printing or clerical errors.

Apple Computer, Inc.

1 Infinite Loop

Cupertino, CA 95014-2084
(408) 996-1010

Apple, the Apple logo, LaserWriter, Macintosh, and QuickTime are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.

Adobe and PostScript are trademarks of Adobe Systems Incorporated or its subsidiaries
and may be registered in certain jurisdictions.

Helvetica is a registered trademark of Linotype-Hell AG and its subsidiaries.
Simultaneously published in the United States and Canada.

Mention of third-party products is for informational purposes only and constitutes
neither an endorsement nor a recommendation. Apple assumes no responsibility with
regard to the performance or use of these products.

c ON T EN T S

Communications regulation information v
Preface vii

Installing the Card and Software 1
What you should have 2

Installing the TV/FM tuner card in a
compact computer 4

Installing the TV/FM tuner card in a
modular computer 26

Connecting other video equipment 34
Installing the software 42
Where to go from here 44

Listening to the FM Radio 45
Turning on the FM Radio 46

Turning off the FM Radio 47

Getting help on screen 47

Tuning in to stations 48

Adjusting the sound 49

Customizing the FM Radio Settings 51
Presetting stations 52

Setting signal range and strength 60

Setting other preferences 62

Recording from the Radio 65
Compressing recordings 66
Saving recordings 67

Watching TV or Video 71
Opening Apple Video Player 72
Getting help on screen 73

Choosing a video source 75
Changing TV channels 76
Adjusting the sound 77
Adjusting the picture 80

Customizing the TV Tuner Settings 81
Programming channels 82

Giving names to channels 86

Locking and unlocking channels 88

Creating and changing a password 90

Setting and editing TV reminders 93

Setting a hot key 96

Capturing TV and Video Images 97
Capturing individual images 98
Capturing movies 100

Other Features 105

Setting the closed caption and video text options 106
Changing the video window size 107

Changing the window color 109

Setting the video input standard 110

Using the Remote Control 111
Controlling your FM radio 112
Controlling TV or video 114

Controlling your CD-ROM player 115
Setting preferences 116

Troubleshooting 117
Problems listening to the radio 118
Problems watching TV or video 122

Appendix: Viewing Closed Captions on
Videotape 131

Index 133

Communications regulation information

FCC statement

This equipment has been tested and found to comply with the limits for a Class B
digital device in accordance with the specifications in Part 15 of FCC rules. See
instructions if interference to radio or television reception is suspected.

Radio and television interference

The equipment described in this manual generates, uses, and can radiate radio-
frequency energy. If it is not installed and used properly—that is, in strict accordance
with Apple’s instructions—it may cause interference with radio and television
reception.

This equipment has been tested and found to comply with the limits for a Class B
digital device in accordance with the specifications in Part 15 of FCC rules. These
specifications are designed to provide reasonable protection against such interference
in a residential installation. However, there is no guarantee that interference will not
occur in a particular installation.

You can determine whether your computer system is causing interference by turning it
off. If the interference stops, it was probably caused by the computer or one of the
peripheral devices.

If your computer system does cause interference to radio or television reception, try to
correct the interference by using one or more of the following measures:

Turn the television or radio antenna until the interference stops.
Move the computer to one side or the other of the television or radio.
Move the computer farther away from the television or radio.

Plug the computer into an outlet that is on a different circuit from the television or
radio. (That is, make certain the computer and the television or radio are on circuits
controlled by different circuit breakers or fuses.)

If necessary, consult an Apple-authorized service provider or Apple. See the service
and support information that came with your Apple product. Or, consult an
experienced radio/television technician for additional suggestions.

Important Changes or modifications to this product not authorized by Apple
Computer, Inc., could void the FCC Certification and negate your authority to operate
the product.

This product was tested for FCC compliance under conditions that included the use of
Apple peripheral devices and Apple shielded cables and connectors between system
components. It is important that you use Apple peripheral devices and shielded cables
and connectors between system components to reduce the possibility of causing
interference to radios, television sets, and other electronic devices. You can obtain
Apple peripheral devices and the proper shielded cables and connectors through an
Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer
or dealer for assistance.

DOC statement

DOC Class B Compliance This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of
Communications.

Observation des normes—Classe B Cet appareil numérique respecte les limites de
bruits radioélectriques applicables aux appareils numériques de Classe B prescrites
dans la norme sur le matériel brouilleur : “Appareils Numériques”, NMB-003 édictée
par le ministre des Communications.

VCCI statement

RUBE SS REE EMAMCOWT

CORR, POAC (CEHIR MS tO PEEL HRI BO CH
JHSNSNSHREE) CHE BMIM CORRES ULE ANS Le
FRR A ERUERA (VCCI) HHS L CBU ETS
LOL. BRIBE DUAL FLEY a YEAR EE LT OPEC SE,
ZEMEORNERSCEMHOET.

HGR SH ic feo CIEL ORS LCT K RAV,

This manual tells you how to install and use the hardware
and software that are part of the Apple TV/FM Radio System
so that you can

watch TV or video and listen to the radio on your computer
capture video or TV images on disk

save radio recordings on disk

determine which channels or radio stations you receive

set up a password to restrict access to one or more TV
channels

take advantage of available closed captions, video text, and
Second Audio Program (SAP) when you’re watching TV on
your computer

manipulate basic TV and radio features with the included
remote control

quickly switch among watching TV, listening to the radio,
and using your other computer application programs

Note: You use two separate applications to watch TV and
listen to radio, but you can do both on your computer at the
same time. However, you will not hear the TV while the
radio is playing.

vii

Installing the Card and Software

This chapter explains how to install the TV/FM tuner card
and software you need to watch TV and listen to the radio on
your computer. You'll find information on how to

= install the TV/FM tuner card

= attach an FM radio antenna and a TV antenna (or cable
service connection) to the card

= attach a VCR (or other video device) to your computer’s
video input ports

= install the Apple FM Radio application program, which you
use to listen to the radio, and the Apple Video Player
application program, which you use to watch TV and video
(an installer installs both of these applications at once
for you)

If you purchased your computer with the video input card,
TV/EM tuner card, and software already installed, skip the
instructions in this chapter for installing the TV/FM tuner
card. (Be sure to read the instructions and look at the
illustrations for attaching a TV antenna and FM antenna.)

What you should have

Check your package to make sure you have everything you
see here. Your package also contains floppy disks from
which you will install the software later.

FM antenna

Note: Your remote control or FM antenna may look
different from the one shown here.

To install the TV/FM tuner card, you first attach it to the
computer, and then connect an FM antenna and a TV
antenna (or a cable service connection) to it.

2 Chapter 1

Important The TV portion of your TV/EM tuner card will
not work if you do not have a video input card already
installed. To see if your computer has a video input card
installed, check the back of your computer for these three
protruding ports.

If thesé ports are present, then a video input card is installed.

You need a video input card even if you do not intend to
connect any video equipment (such as a VCR or video
camera) to it. If you do not have a video input card, purchase
it separately from an Apple-authorized dealer and install it
according to the instructions that come with it. If you have a
video input card installed, go on to the next section.

The steps for attaching the TV/FM tuner card to your
computer vary slightly depending on whether or not your
computer has a built-in monitor.

Installing the Card and Software 3

Installing the TV/FM tuner card in
a compact computer

If your system has a built-in monitor, like this one, continue
with the steps below. Otherwise, go to the section that
follows, “Installing the TV/FM Tuner Card in

a Modular Computer.”

°o

4 Chapter 1

Important Before you install the card, check the back of
your computer and make sure the access cover for the
TV/EM tuner card looks like the one on the computer on
the left.

|
\| (Ge
r

|
[Ooo ee

—— a

The back panel on your If the back panel on your computer

computer should have a bas a small circular access cover,

rectangular access cover. you'll need to purchase a
replacement panel from

an Apple-authorized dealer.

If the access cover on your computer matches the
illustration on the left, continue with the instructions in this
chapter. (The rectangular opening in the computer on the
left accommodates both ports of the TV/FM tuner card.)

If the access cover on your computer looks like the
computer on the right, you need to purchase a replacement
for the back panel from an Apple-authorized dealer. After
you've purchased the new back panel, continue with the
instructions in this chapter.

Installing the Card and Software 5

To install the TV/FM tuner card in a computer with a built-in
monitor, follow these steps:

Removing the logic board

1 Make sure you save any open documents and quit any open
applications. Then turn off the computer like this:

a First, choose Shut Down from the Special menu.

= Then press the power switch at the back of the computer.
Press the side of the switch marked with the O symbol.

2 Unplug all the cables except the power cord from your
computer,

Leaving the power cord plugged in helps protect
the computer from damage by electrostatic discharge.

Important To avoid generating static electricity that may
damage the card or computer, do not walk around the room
until you have completed the installation of the card and
closed the computer. Additionally, move the logic board as
little as possible while it is outside the computer.

6 Chapter 1

3 Use a screwdriver to remove the screws from the back panel.

Note: [f you had to buy a new back panel and are removing
your old one, there are only two screws to remove, one on
each side.

Remove these three screws.

Installing the Card and Software 7

4 With your fingertips, locate the two latches on the underside
of the computer’s case.

Locate the two latches on the underside of the computer's
case with your fingertips.

8 Chapter 1

5 Pulling gently, swing the panel up and slip it out.

Pulling gently, swing the
panel up and slip it out.

Remember: Don’t walk around the room until you have
finished installing the card and closed the computer. Move

the logic board as little as possible while it’s outside the
computer.

Installing the Card and Software

6 There is a wire handle on the back of the logic board. Swing
it down and use it to pull the logic board toward you.

Wire handle

The logic board is plugged into a slot inside the computer,
so you may have to brace the computer with your other
hand and pull firmly at first. Slide the entire logic board all
the way out of the computer.

10 Chapter 1

Installing the TV/FM tuner card

1 There is a ribbon cable inside the computer, held in place
under the logic board tray, at the bottom of the chassis. Pull
the cable gently a short way out of the opening.

Ribbon cable

If the ribbon cable is taped down on the inside of the computer,
remove the tape and gently pull the ribbon cable a short way
out of the opening so that you can attach it to the card.

2 Remove the TV/FM tuner card from its static-proof bag. Hold
the card by its edges to avoid touching the connectors.

Installing the Card and Software 11

3 Attach the plug on the ribbon cable to the connector on the
TV/EM tuner card.

Connector

Ribbon cable plug

12 Chapter 1

4 Slide the TV/FM tuner card into place under the logic board
tray. Fit the edges of the card into both of the guides there,
making sure the notches on the card point upward.

Make sure the TV/FM tuner card slides
into the guides along the underside
of the sheet metal logic board tray.

Install the TV/FM tuner card with
these notches pointing upward. Sheet metal logic board tray

Installing the Card and Software 13

5 Locate the TV/FM tuner card access cover on the inside of
the plastic back panel.

Note: If you purchased a new back panel, locate the access
cover on the back of that panel.

Plastic back panel

14 Chapter 1

6 Remove the cover from its opening by squeezing together
the plastic tabs that hold it in place.

Squeeze the two plastic tabs
together and pull off the metal

retainer so the access cover
“i can come off.
mS
oor

cH @

Store the access cover; you may want to put it back in place
it if you ever remove the TV/FM tuner card.

Installing the Card and Software 15

Replacing the logic board

1 Swing the wire handle on the logic board back up into its
storage position, securing it under its catch. Then fit the
logic board into the guide rails on both sides of the
computer’s interior.

Make sure the logic board slides
into the guides that are on both
sides of the computer's interior.

Swing the handle up, into its storage position.

16 Chapter 1

2 Press the reset button on the logic board. Then gently but
firmly push on the vertical plate until the logic board is back
into place within the computer. You'll need to push a little
harder at the end to make sure the connectors at the back of
the board are seated in their slot.

Note: If you can’t find the reset button, it may be ina
different location on your logic board. Check the manual
that came with your computer, in the section in the
appendix about installing expansion cards. There you will
find an illustration that shows where the reset button is for
your computer.

1 Press the reset button.

2 Gently but
firmly push on the
vertical plate until the logic

board is solidly back in place.

Installing the Card and Software 17

3 Slip the three tabs at the top of the back panel into the
matching grooves in the computer case.

Note: If you purchased a different back panel from the one
that was originally on your computer, attach the new back
panel. You no longer need the old one.

Slip the three tabs on the
back panel into the grooves
in the computer case.

18 Chapter 1

4 Then snap the bottom of the panel into place, making sure it
is flush with the back of the computer.

Snap the plastic back panel into place.

Installing the Card and Software 19

5 With a screwdriver, insert and gently tighten one of the
provided attachment screws in the hole just to the left of the
TV/FM tuner card.

Reinsert this screw to secure the
TV/FM tuner card in the computer.

20 Chapter 1

6 Reinsert the security screws on both sides of the back panel.

Reinsert both security screws.

Installing the Card and Software 21

Making connections to the TV/FM tuner card

After installing the TV/FM tuner card by attaching the card to
the computer, you then attach an FM antenna and a TV
antenna (or cable service connection) to the card.

To attach FM and TV connections to the card, follow these
steps.
1 Turn off the computer if it isn’t already off.
= Choose Shut Down from the Special menu.
= Then press the power switch (marked with the O
symbol) at the back of your computer.

2 Attach the provided FM antenna to the FM port—the port on
the left, marked by the fd icon. Depending on the type of
antenna that came in your package, you may have to either
push or screw the connector onto the FM port.

Attach the FM antenna to the FM tuner port.
The FM tuner port is marked with the wa icon.

22 Chapter 1

3 Before you attach the TV cable, make sure it has an F-type
coaxial cable connector.

Important Do not attach or detach the coaxial cable while
the computer is turned on.

F-type coaxial cable connectors

Note: If you want to view closed captions on a videotape
that has them, you must connect your VCR to the TV/FM
tuner card, not the video input card. For instructions on how
to do this, see the Appendix, “Viewing Closed Captions on
Videotape.”

Installing the Card and Software 23

4 Using an F-type coaxial cable connector, connect the TV port
on the right, marked by the EX icon, to a cable service or to
a TV antenna.

Attach the coaxial cable to the TV tuner port.
The TV tuner port is marked with the D icon.

Coaxial cable from an external TV antenna or cable TV service

5 Reconnect any cables you disconnected at the start of
this process.

Because you pressed the reset button on the logic board
earlier, some of your computer's software settings will have
changed (for example, the date and time on your computer
will need to be reset). You may want to open the control
panels for the date and time, keyboard, and mouse to make
sure that they are set the way you want them. For more
information about resetting these options, refer to
Macintosh Guide, available in the Guide (@)) menu. (If you
do not have Macintosh Guide on your computer, see the
manual that came with your computer.)

24 Chapter 1

6 Unfold the FM antenna and position it high for the best
reception.

Attach the antenna to a wall in the position that gives the
clearest reception. Use tape, thumbtacks (through the
middle of the plastic strips), or pushpins (through the white
plastic ends).

oe F D

FM antenna ol

(Attach the “T” in the position
that gives clearest reception.)

7 Skip the next section, “Installing the TV/FM Tuner Card in a
Modular Computer,” and go on to the section that follows,
“Connecting Other Video Equipment.”

Installing the Card and Software 25

Installing the TV/FM tuner card in
a modular computer

If your system has a separate monitor, like this one, continue
with the steps below. If the monitor is built into your system,
go back to the section that precedes this one, “Installing the
TV/EM Tuner Card in a Compact Computer.”

To install the TV/FM tuner card in a modular computer,
follow these steps:

1 Make sure you save any open documents and quit any open
applications. Then turn off the computer.

Choose Shut Down from the Special menu.

2 Unplug all the cables except the power cord from your
computer,

Leaving the power cord plugged in helps protect
the computer from electrostatic discharge damage.

26 Chapter 1

3 Use a screwdriver to unscrew the access cover for the TV/FM
tuner card port.

Remove both screws and the access cover.

4 Remove the access cover by pulling it toward you.

You won't have to replace the access cover after you've
installed the TV/FM tuner card, but you will need the screws.
Store the access cover; you may want to put it back on if you
ever remove the TV/FM tuner card.

5 Remove the TV/FM tuner card from its static-proof bag.

Installing the Card and Software 27

6 Reach into the access hole you just uncovered and gently
pull out the ribbon cable.

Ribbon cable

Gently pull the ribbon cable a short
way out of the opening so that you
can attach it to the card.

7 Insert the ribbon cable plug into the connector on the back
of the card.

Connector

‘Ribbon cable plug

28 Chapter 1

8 Gently slide the card into the access hole, with the ribbon
cable on the side of the card that’s facing down.

Be sure that all the ribbon cable goes into the access hole.
e. Make sure the TV/FM tuner

X card slides into the guides
that are on both sides of
the opening.

9 Screw the TV/FM tuner card to the computer.

To do this, use the screws you removed in step 3.

Reinsert both screws.

Installing the Card and Software 29

Making connections to the TV/FM tuner card

After installing the TV/FM tuner card by attaching the card to
the computer, you then attach an FM antenna and a TV
antenna (or cable service connection) to the card.

To attach FM and TV connections to the card, follow these
steps.

1 Turn off the computer if it isn’t already off.
Choose Shut Down from the Special menu.

Attach the FM antenna
to the FM tuner port. The
FM tuner port is marked
with the =a icon.

ee
|__F HT F5p >

30 Chapter 1

3 Before you attach the TV cable, make sure it has an F-type
coaxial cable connector.

Important Do not attach or detach the coaxial cable while
the computer is turned on.

F-type coaxial cable connectors

Note: If you want to view closed captions on a videotape
that has them, you must connect the VCR to the TV/FM
tuner card, not the video input card. For instructions on how
to do this, see the Appendix, “Viewing Closed Captions on
Videotape.”

Installing the Card and Software 31

Using an F-type coaxial cable connector, connect the TV port
on the right, marked by the CD icon, toa cable service or to
an antenna.

Attach the coaxial cable
to the TV tuner port. The
TV tuner port is marked
with the D icon.

Coaxial cable from an external TV antenna or cable TV service

Chapter 1

5 Reconnect the power cord and any cables you disconnected
at the start of this process.

6 Unfold the FM antenna and position it high for the best
reception.

Attach the antenna to a wall in the position that gives the
clearest reception. Use tape, thumbtacks (through the
middle of the plastic strips), or pushpins (through the white
plastic ends).

e D

FM antenna ———

(Attach the “T” in the position
that gives clearest reception.)

Installing the Card and Software 33

Connecting other video equipment

If you want to see video on your computer from a VCR, laser
disc player, video camera, or other video equipment, you
need to connect the equipment to the ports on the video
input card in your computer.

You can connect one piece of equipment to the S-video
port or one piece to the composite video port on the video
input card.

Note: You can also connect two pieces of video equipment
to the video input card simultaneously—one to the S-video
input port on the card and another to the composite video
input port on the card. For example, you can view a
recording from a video camera connected to the S-video port,
then switch—using the Apple Video Player application,
without having to disconnect cables—to viewing video from a
VCR connected to the composite port on the card. However,
you will hear sound only from that piece of equipment that is
connected to the audio input ports on the card.

Preparing to connect video equipment
Before you start, make sure that
= both the Macintosh and the video equipment are turned off

= you place the video equipment near enough to your
Macintosh for easy connection

= you determine which type of video connector you need for
your video equipment (see the next section)

34 Chapter 1

Determining which video connector
you need

Check the video out port or ports on your video equipment.
A video out port should look like one of the ports pictured
below. (You may have both ports.)

S-video port Composite video port (RCA-type)
To connect to a composite video out port, use a composite

(RCA plug) connector. See “Connecting Video Equipment If
You Use a Composite (RCA Plug) Video Connector.”

Composite connector (RCA plug)

To connect to an S-video video out port, use an S-video
connector. See “Connecting Video Equipment If You Use an
S-video Connector.”

S-video connector

Installing the Card and Software 35

Connecting video equipment if you use
a composite (RCA plug) video connector

To connect your video equipment you need one video cable
and two audio cables, all with RCA plugs at both ends. The
cables can be separate or joined. You can purchase cables at
electronics supply stores.

Uae am) (] T=
RCA video RCA
Uae am (T=
RCA audio RCA
<C))me ame(] T=
RCA audio RCA

<b (D>

eZ ————udin = iti(‘«é«“

RCA RCA

Note: If you have only one audio out port on your video
equipment, you can use a Y-adapter audio cable. This cable
has a single plug on one end to plug into your equipment
and a double plug (where it forms a Y) on the other end to
plug into the two audio ports on the video input card.

36 Chapter 1

1 Make sure that both the Macintosh and the video equipment
are turned off.

2 Attach one end of the video cable to the video out port on
the video equipment.

3 Plug the other end of the video cable into the yellow
composite video input port on the video input card.

4 Insert the RCA plugs on one end of the audio cables into the
left and right audio out ports on the video equipment.

If you’re using a Y-adapter audio cable: Plug the single
end of the cable into the audio out port on your video
equipment.

5 Insert the RCA plugs on the other end of the audio cables
into the left (white) and right (red) sound input ports on the
video input card.

Be sure to plug the cable from the left audio out port on the
video equipment to the left sound input port on the
computer. Connect the right ports in the same way.

If you're using a Y-adapter audio cable: Plug the double
end of the cable (where it forms a Y) into the right and left
sound input ports on the video input card.

Installing the Card and Software 37

The video input card ports are exactly the same ona
computer with a built-in monitor, and the card itself is in
about the same position on the back of the unit as in the
illustration below of a computer without a built-in monitor.

Video input port (yellow)
Left sound input port (white)
’~ Right sound input port (red)

| Video out port
© | Left audio out port
— Right audio out port

The ports on your video equipment may be arranged
and labeled differently from those shown here.

Your video equipment is now connected to the video
input card.

38 Chapter 1

Connecting video equipment if you use an
S-video connector

To connect your video equipment you need one video cable
with S-video connectors on both ends and two audio cables
with RCA plugs at both ends. The RCA cables can be separate
or joined. You can purchase cables at electronics supply
stores.

S-video S-video
C= ox(((( =
RCA audio RCA
C= mn (=
RCA audio RCA
or

S-video S-video

Bg tst*~SN

audio

Installing the Card and Software 39

1 Make sure that both the Macintosh and the video equipment
are turned off.

2 Attach one end of the video cable to the video out port on
the video equipment.

3 Plug the other end of the video cable into the S-video input
port on the video input card.

About the S-video port: The S-video port accepts 4-pin and
7-pin connectors.

If the connector doesn’t slide easily into the port, realign it
and try again. Avoid using force, which could damage the
card or the connector.

4 Insert the RCA plugs on one end of the audio cables into the
left and right audio out ports on the video equipment.

If you’re using a Y-adapter audio cable: Plug the single
end of the cable into the audio out port on your video
equipment.

5 Insert the RCA plugs on the other end of the audio cables
into the left (white) and right (red) sound input ports on the
video input card.

Be sure to plug the cable from the left audio out port on
the video equipment to the left sound input port on the
computer. Connect the right ports in the same way.

If you're using a Y-adapter cable: Plug the double end of
it (where it forms a Y) into the right and left sound input
ports on the video input card.

40 Chapter 1

The video input card ports are exactly the same on a
computer with a built-in monitor, and the card itself is in
about the same position on the back of the unit as in the
illustration below of a computer without a built-in monitor.

Right sound input port (red) Right audio out port
Left audio out port

Left sound input port (white)

The ports on
Mp your video
Yi, equipment may
ic be arranged
i and labeled

differently from
those shown here.

Cables with pe
RCA plugs

Your video equipment is now connected to the video
input card.

Installing the Card and Software 41

Installing the software

To play TV and FM radio you use two separate applications.
The Apple Video Player application lets you watch TV and
video on your computer; the Apple FM Radio application lets
you listen to FM radio on your computer.

Note: If you already have a version of Apple Video Player
on your computer, the installer disks in this package
automatically replace that version with the latest version of
Apple Video Player at the same time that they install the
Apple FM Radio application.

To install the Apple FM Radio and Apple Video Player
application programs, follow these steps.

1 Start the computer.

2 Insert the floppy disk, 7V/FM Software Install Disk 1, into
the floppy disk drive.

3 Double-click the disk icon to open it.
4 Double-click the Installer icon.

Installer

42 Chapter 1

5 Click Install.

6 Follow the instructions on the screen.

The instructions on the screen tell you when you need to
insert the next software installer disk.

7 When the installation is complete, click Restart.

You can now find two separate folders in your Apple Extras
folder on your hard disk—one for the Apple FM Radio
application and one for the Apple Video Player application,
with the icons for the applications inside the appropriate
folders.

These are the icons for the applications:

Installing the Card and Software 43

Where to go from here

The TV/FM tuner card is preset to display TV shows from
broadcast TV and to receive FM radio broadcasts.

If you want to listen to the radio

= To begin listening to the radio immediately, turn to
Chapter 2, “Listening to the FM Radio.”

= To preset your favorite stations or to set the radio to
receive only the strongest station signals, see Chapter 3,
“Customizing the FM Radio Settings.”

= To learn how to save radio recordings on your computer,
see Chapter 4, “Recording from the Radio.”

If you want to watch TV or video

= To begin watching TV or video immediately, turn to
Chapter 5, “Watching TV or Video.”

= To switch the source of the TV signal from antenna to cable
service, see “Choosing a Connection (Antenna or Cable
Service)” in the section “Programming Channels” in
Chapter 6.

= To customize TV tuner features in the way that best fits your
viewing habits, see Chapter 6, “Customizing the TV Tuner
Settings.”

= To learn how to capture individual images or whole movie
sequences, see Chapter 7, “Capturing TV and Video Images.”

44 Chapter 1

Listening to the FM Radio

This chapter contains most of the information you need to
use the Apple FM Radio application program to listen to FM
radio on your computer.

You may find listening to the radio more convenient if you
first set up some of the options discussed in Chapter 3,
“Customizing the FM Radio Settings.”

See also: Chapter 9, “Using the Remote Control.”

Turning on the FM Radio

To turn on the radio, open the Apple FM Radio application
program by double-clicking its icon. (The application is in
the Apple FM Radio folder, in the Apple Extras folder on
your hard disk.)

Apple Fh Radia

When the Apple FM Radio application opens, a window
appears and the radio comes on. (You may hear only static
until you tune in a clear station.)

If you do not hear the radio right away, see the section
“Problems Listening to the Radio,” in Chapter 10.

Note: If you get a message telling you to select TV as the
video source in Apple Video Player, do that. If you need
help, see the section “Choosing a Video Source” in
Chapter 5.

Se] KW V_e1Xcho ]Seeeeeq{[Ub

Lge ed bt TS 3 et
Pos es A | ))
Pe Bs Bc |

aiee

46 Chapter 2

Turning off the FM radio

To turn off the FM radio, open the File menu and choose

Quit.

Getting help on screen

If while using the Apple FM Radio application you become
stuck or forget how to do a task, on-screen help may be
available. Make sure that the FM Radio window is active,
then go to the menu at the upper-right corner of the screen,
marked with the @) icon, and choose Apple FM Radio Guide.

Note: Apple FM Radio Guide is not available if you have a
computer with system software earlier than 7.5.

To see explanations of all the items on the screen when you
use Apple FM Radio, make sure that the FM Radio window is
active, then choose Show Balloons from the @ menu.

am
big eo eb aC d Seek Step oot

Pe ts A ee

| 4 | i s | rein y To cycle through all

available FM stations

when tuning, click

r
Me [I~ isiireo these arrows.

Listening to the FM Radio 47

Tuning in to stations

You can tune in to stations with the Apple FM Radio
application much as you would with any radio—by pressing
one of the tuning arrows or one of the six Preset Station
buttons on the left (after you have assigned stations to
them). The frequency number of the station you are playing
is displayed.

Leo eae ed br TS 3

Pe Bs
Ve es Bc |

fe v/ Stereo

To learn how to assign preset stations, see “Presetting
Stations” in Chapter 3.

Seeking stations

To tune in to only the clearest stations, click the Up or Down
arrows under Seek. The radio stops at each of the clearest
stations it receives.

Note: The FM tuner is preset to search all stations for the
clearest signals. However, you can set the tuner so that it
searches for clear stations within a certain signal range or
strength. For example, you can preset the tuner to scan only
local signals or to scan all but the weakest signals. See
“Setting Signal Range and Strength” in Chapter 3.

To automatically assign the clearest stations to the Preset
Station buttons, see “Presetting Stations Automatically” in
the section “Presetting Stations,” in Chapter 3.

48 Chapter 2

Stepping through all stations

To tune in to all available stations (whether or not they come
in clearly), click the Up or Down arrows under Step. To cycle
through the stations more rapidly, place the pointer on one
of the arrows and hold down the mouse button.

Adjusting the sound

You can adjust the FM radio’s volume and set the radio to
receive stereophonic (stereo) or monophonic (mono)
sound. The sound adjustments you make take effect
immediately, so you can monitor your changes.
Changing the sound’s volume
There are four ways to change the volume.

= Use the volume buttons on the front of the computer.

= Drag the slider next to the speaker icon on the FM Radio
window. (You can also click anywhere in the slider’s track to
move the slider to that position.)

a Press the Up Arrow key or Down Arrow key on the keyboard.

a Use the volume controls on the remote control. See
Chapter 9, “Using the Remote Control.”

Listening to the FM Radio 49

Selecting stereo or mono sound

The Apple FM Radio is preset to play sound in stereophonic
(stereo) sound if the station broadcasts in stereo. Some
stations come in more clearly if you select monophonic
(mono) sound. To select stereo or mono sound, follow
these steps.

1 Open the Options menu and drag to the Sound choice.
A pop-up menu appears beside the Sound choice.

2 Select Stereo to receive stereo sound or Mono to receive
mono sound.

The selected sound mode has a checkmark beside it.

hates

Add Preset Stations...
Sound “aa Stereo
Signal Range “Mono

Signal Strength >

Preferences...

50 Chapter 2

Customizing the
FM Radio Settings

This chapter explains how to use the Apple FM Radio
application program to give names to stations, to preset
stations you want to listen to most frequently, and to set the
signal range and strength of the stations you want to receive.

You'll need to turn on the FM Radio before following the
instructions in this chapter. To turn on the FM Radio, open
the Apple FM Radio application by double-clicking its icon.
(The application is in the Apple FM Radio folder, in the
Apple Extras folder on your hard disk.)

Apple Fl Radia

Customizing is optional: The information and instructions
provided in this chapter are meant to make using your Apple
FM Radio more convenient. You don’t have to customize the
Apple FM Radio to listen to the radio on your computer. For
the basic information you need about listening to the radio,
read Chapter 2.

Presetting stations

This section describes how to preset stations so you can
tune them in quickly.

Tuning in to preset stations

After you assign preset stations, there are three ways you can
tune them in:

= Press a Preset Station button in the FM Radio window.

= Choose a preset station from the pop-up menu next to the
frequency of the current station in the FM Radio window.
The pop-up menu lists preset stations in numerical order for
easier reference.

Preset Stati Seek Step Sc

ree
|

Pos
Lcc2 |

4 i 4)

= Press one of the buttons in the Preset Stations window
(chosen through the Options menu).

52 Chapter 3

Assigning stations to the Preset Station
buttons

To specify your favorite station as a preset station, follow
these steps:

1 Tune in to the station you want to preset. (See “Tuning In to
Stations” in Chapter 2.)

The station is displayed in the lower-left corner of the FM
Radio window.

2 Use one of the following methods to assign the station to
a button:

a Place the pointer on a Preset Station button, then hold
down the mouse button until you hear a beeping sound.
The current station’s frequency appears on the button.

= Place the pointer on the station’s frequency, drag it from
the box onto one of the six Preset Station buttons, then
release the mouse button. (Note: This method works only
if you have system software version 7.5 or later.)

gr esa eas Seek Step

| ce.1 fees fl co: Ai
pois fos fc Bi i]

A =

Customizing the FM Radio Settings 53

= Open the Options menu and choose Add Preset Stations.
When the Preset Stations window appears, move it away
from the FM Radio window so that you can see both
windows clearly. Place the pointer on the station’s frequency
and drag it from the box onto one of the rows in the Preset
Stations window. When the row highlights, release the
mouse button.

bg aC Seek Step

Pec Ph ccs It so Nt |

sis Ms2s fs ii fi |

Call Letters Description

Number Frequency

( Auto Add } [ Clear Row | [ Revert |[ Done

This method lets you preset more than six stations.

Note: The first six rows in the Preset Stations window
represent the six buttons in the FM Radio window.

54 Chapter 3

a Inthe Preset Stations window, type in the frequency of the
station you want assigned to that row.

Note: If you just type the station’s call letters (usually four
capital letters) and not the frequency, the station won’t be
assigned as a preset station. You must type in the frequency
because the frequency is what the FM tuner uses to find the
station.

You can also type in the station’s call letters and your own
description, although they’re not required. To display this
information on the Preset Station buttons, see “Labeling
Preset Station Buttons” later in this section.

3 Click on the pop-up menu (the arrow next to the current
station’s frequency in the FM Radio window) to see the list
of all stations you have preset. You can use this menu to
choose a preset station to listen to.

If you want to make changes to the Preset Station buttons,
see “Changing Preset Stations” later in this section.

Customizing the FM Radio Settings 55

Presetting stations automatically

When you preset stations automatically, the Apple FM Radio
application automatically assigns the clearest stations to the
first available rows in the Preset Stations window, after
stations that have already been assigned. (The added
stations also appear in the pop-up menu list in the FM Radio
window.)

Note: The Apple FM Radio application is set to search all
stations for the clearest signals when automatically adding
stations. You may want to search for stations within a certain
signal range or strength. If you want to do this, see the
section “Setting Signal Range and Strength” later in this
chapter before you continue with these instructions.

56 Chapter 3

To preset the clearest stations by adding them automatically,
follow these steps.

1 Open the Options menu and choose Add Preset Stations.

The Preset Stations window appears.

Preset Stations

Number Frequency CallLetters Description

If you’ve preset stations already, they appear in the rows.

2 Click Auto Add.

The FM tuner adds the clearest stations to the rows in the
Preset Stations window and to the pop-up menu in the FM
Radio window. If you’ve preset some stations already, Auto
Add adds to the list in the Preset Stations window; it does
not override stations you have already preset. The stations
added appear in numerical order after the stations that were
already preset.

If you want to make changes to any of your preset stations,
see “Changing Preset Stations” later in this section.

Customizing the FM Radio Settings 57

Labeling Preset Station buttons

The Apple FM Radio application automatically displays
stations’ frequencies on the six main Preset Station buttons
when you assign stations to them. But you can also display
stations’ call letters or descriptions on the buttons (or
display simply the numbers 1 through 6 on the buttons).

To display call letters, descriptions, or numbers on the
Preset Station buttons, follow these steps:

1 Make sure that you have typed in call letters or descriptions
for the stations in the Preset Stations window.

2 Open the Options menu and choose Preferences.

= FM Radio Preferences

- Compression / Sample Rate: —, - Type of Info shown: ~

Least Highest © Numbers

disk aa Gai oa Quality

@ Frequencies
© Call Letters
Compression: 3:1

Sample Rate: 22KHz © Descriptions

space

{ Audio Confirmation of Presets

Color of Current Station Text:

3 In “Type of Info shown,” click in the circle next to one of the
following:

= Numbers—if you want the Preset Station buttons to be
numbered in order, 1 through 6

a Frequencies—if you want station frequencies (for example,
102.1) to appear on the Preset Station buttons

58 Chapter 3

= Call Letters—if you want the stations’ call letters to appear
on the Preset Station buttons (usually the call letters are four
capital letters, such as WABC)

= Descriptions—if you want your own description of the
station to appear on the Preset Station buttons. (Only the
first four to six characters of the description appear on
the button.)

Changing preset stations
There are several ways to change the stations you’ve preset.

= To change a station in the preset stations list, click in the
frequency column of the row you want to change, and type a
new frequency label.

Remember: You must type in the frequency because the
frequency is what the FM tuner uses to find the station. You
can also change the call letters and description.

= To add the current station to the list, drag its frequency onto
any button in the FM Radio window or to a row in the Preset
Stations window.

= To move a preset station to a different button or place in the
list, drag an entire row on top of another row in the Preset
Stations window.

= To clear a row (delete its contents), click anywhere in the
row and then click Clear Row.

= To undo all changes you just made to the Preset Stations
window (since you last opened it), click Revert.

Customizing the FM Radio Settings 59

Setting signal range and strength

You can set your FM radio so that it searches within a certain
signal range or strength for the clearest signals whenever
you use the Seek or Auto Add features.

Choosing signal range

You can select the area—wide or local—from which Apple
FM Radio receives stations. The Apple FM Radio is preset to
receive whatever stations it can pick up, but you may
sometimes want to choose a local range to reduce
interference from strong neighboring stations (stations that
are not local).

To choose the range of the signals in which the FM tuner
searches, follow these steps:

1 Open the Options menu and choose Signal Range.

Options
Add Preset Stations...

Signal Range
Signal Strength

Preferences...

2 Choose DX to receive any station the radio can pick up.
Choose Local to receive only local stations.

A checkmark appears beside the range that is selected.

60 Chapter 3

Choosing signal strength

By choosing a signal strength, you can set the Apple FM
Radio to seek or to automatically add stations that send
signals of a certain strength. For example, if you set the
signal strength to Strongest Only, the Apple FM Radio will
seek or automatically add fewer stations than if you had set
the signal strength to All Stations.

To choose the signal strength that the Apple FM Radio
application looks for when it seeks or adds stations, follow
these steps:

1 Open the Options menu and choose Signal Strength.

hae
Add Preset Stations...

Sound >
Signal Range >
SCID OC I RG la «<All Stations
All Except Weakest
Preferences... Strong
¥ Strongest Only

2 Choose the signal strength you want.

The signal strength you choose affects how many stations
come up when you use the Seek or Auto Add features.

Customizing the FM Radio Settings 61

Setting other preferences

Besides selecting the type of station information you want to
have appear on the Preset Station buttons, you can also
choose the color in which the currently playing station’s
frequency is displayed, and whether or not you hear an alert
sound as a confirmation when you preset a new station.

To learn how to change the compression/sample rate of any
recordings you make, see the section “Compressing
Recordings” in Chapter 4, “Recording from the Radio.”

= To change the color of the text displaying the frequency of
the current station, open the Options menu and choose
Preferences. Click on the pop-up menu next to Color of
Current Station Text and select the color you want.

Note: Whatever station is currently playing is always
displayed in red in the Preset Stations window. The color
you choose only changes the frequency of the current
station displayed at the lower left in the FM Radio window.

FM Radio Preferences

Compression / Sample Rate: - Type of Info shown: ~
Least Highest © Numbers
EC eee Quality z
apiOh ea @ Frequencies

p © Call Letters
Compression: 3:1

Sample Rate: 22KHz © Descriptions

Audio Confirmation of Presets

Color of Current Station Text:

62 Chapter 3

= To turn off the beep you hear when a new station is
successfully preset, click in the Audio Confirmation of
Presets box to remove the X.

After you’ve finished selecting your preferences, click OK to
implement the changes. (The window then closes.)

= To undo any changes you made since you last opened the
Preferences window, click Reset.

Customizing the FM Radio Settings 63

Recording from the Radio

This chapter gives instructions for using the Apple FM Radio
application to record radio sound onto your computer's
hard disk. It also gives instructions for compressing
recordings so that they take up less disk space. You can play
back recordings with the SimpleText application, which uses
QuickTime technology to play back sound.

You'll need to turn on the radio before following the
instructions in this chapter. To turn on the radio, open the
Apple FM Radio application program by double-clicking its
icon. (The application is in the Apple FM Radio folder, in
the Apple Extras folder on your hard disk.)

Apple Fh Radia

Compressing recordings

Before you record, you may want to choose a compression
rate for your recording. Recordings that are not compressed
have high-quality sound, but they take up a lot of disk space.
If you compress a recording, it takes up less disk space but
the recording sounds less clear than the original when you
play it back.

To compress recordings, follow these steps before you
record:

1 Open the Options menu and choose Preferences.

The FM Radio Preferences window appears.
= FM Radio Preferences

~ Compression / Sample Rate: - Type of Info shown: ~
Least Highest oO Numbers
disk ana VU ‘die Quality =
space @ Frequencies

x © Call Letters
Compression: 3:1

Sample Rate: 22KHz © Descriptions

{Audio Confirmation of Presets

Color of Current Station Text:

2 In the Compression/Sample Rate box, choose the
compression rate you want by dragging the slider towards
“Least disk space” or “Highest Quality.”

Acompression rate of 1:1 means that no compression takes
place. A compression rate of 3:1 uses a third of the disk
space that 1:1 uses. A compression rate of 6:1 saves the most
disk space.

66 Chapter 4

Remember: Compression affects the sound quality of your
recording: the more compression you use, the less clear
your recording sounds.

You can also click anywhere in the track to move the slider.

Note: The compression ratios possible for your computer
may be different from those possible for other computers.
(As a result, you might not be able to move the slider to
certain positions on the slider bar.)

3 Click OK.

The compression rate you just chose remains in effect for all
recordings until you change the compression rate in the FM
Radio Preferences window again.

Saving recordings

You can record from the radio any time by pressing the
Record button in the FM Radio window.

To record from the radio and save it on a disk, follow
these steps.

1 Choose a compression rate for your recording, if you want to
and haven’t done so already. See the previous section,
“Compressing Recordings.”

Recording from the Radio 67

2 Click the Record button in the FM Radio window.

go ecard Seek Step Yolume

cos Mf cco foo” I ft Janel i 4)

ma. 7

Immediately, the Record button turns into a Stop button and
red light, and a “Recording time” counter appears that tells
you the length of time that has passed since you clicked
Record.

Lge ead Bot To od Rot

ccs Picco ft co” i vl ie fT 4)

cos fos fc i]

88.5 = eee St | eee RRR RS |

3 Click Stop when you want to stop recording.

Important [f you don’t click the Stop button, recording
continues until the hard disk is full.

68 Chapter 4

The Save Audio Recording dialog box appears.

B Save Audio Recording
Playback =) JES falo)

= Quantum 1.2Gb v = Quantum 1....

(Apple Extras a Eject
fy ScreenShot Read Me

% SimpleText Desktop
(system Folder
QOlbUtilities oo
Name for your recording:
My Recording #1 Coxe)

4 Specify a name for your recording and the location where
you want to save it.

You can also play back a recording and adjust the recording’s
volume before you save it, using the Playback bar. Click the
play (>) button to play it back and the sound («))) button to
adjust the volume.

5 Click Save.

When you open the recording later (by double-clicking its
icon), it opens as a SimpleText document, which uses
QuickTime technology to play back the sound at the volume
level at which you saved it.

Recording from the Radio 69

Watching TV or Video

This chapter contains most of the information you need to
use the Apple Video Player application program to watch TV
or video on your computer. You also use Apple Video Player
to watch video (from a VCR or video camera, for example)
on your computer.

You may find watching TV more convenient if you first set
up some of the options discussed in Chapter 6,
“Customizing the TV Tuner Settings.”

See also: “Setting the Closed Caption and Video Text
Options” section in Chapter 8 and Chapter 9, “Using the
Remote Control.”

Opening Apple Video Player

To use the Apple Video Player application program, open

it by double-clicking its icon. (The application is in the
Apple Video Player folder, in the Apple Extras folder on your
hard disk.) You can also press the TV/MAC button on the
remote control.

Apple Video Player

When the Apple Video Player application opens, a video
window appears. You can watch video or TV in the
video window.

If you don’t get an image in the window right away, see
Chapter 10, “Troubleshooting.”

72 Chapter 5

Getting help on screen

On-screen help for the Apple Video Player application is
available through the menu at the upper-right corner of
the screen, marked with the @ icon. When Apple Video
Player is the active application, choose Apple Video Player
Guide from the @ menu. Apple Video Player Guide gives
you step-by-step instructions for tasks you need help doing.

Note: Apple Video Player Guide is not available if you have
a computer with system software earlier than 7.5.

To see explanations of all the items on the screen when you
use Apple Video Player, make sure that the video window is
active, then choose Show Balloons.

Regt ES

Sharpness:

To display the —
sound controls,
I) click this button.

Watching TV or Video 73

To be reminded of keyboard shortcuts you can use with
Apple Video Player, choose Apple Video Player Shortcuts
from the @) menu.

@ Apple Video Player Shortcuts

To change channels Left Arrow or Right Arrow
To go directly to any channel Type the channel number and press Enter
To returm to the previous channel Tab

To change the sound volume Up Anow or Down Arrow
To mute the sound #-M

Using a hot key

You can also open the Apple Video Player application by
pressing a “hot key” (a preset key or combination of keys).
When you press this hot key, you switch to the Apple Video
Player program no matter what computer program you

are currently in. To learn how to set a hot key, see “Setting a
Hot Key” in Chapter 6.

74 Chapter 5

Choosing a video source

Using the Apple Video Player application, you can either
view TV signals that come through a cable or an antenna, or
watch a video recording from a VCR or other video device.

To choose a video source setting, follow these instructions:

1 Open the Windows menu and choose Show Controls
Window.

The Controls window appears.

2 Click the video screen icon.

The screen controls appear.

SSS as

Rat CO t ll abe

Video | S-Video
Brightness:
o ___||___i-@:

Bod et sae
| |
Contrast:

a _——= 4

Watching TV or Video 75

3 Click the video source you want to use:
= Ifyou want to watch TV, click TV.

a [If you want to view video from a VCR or other device
that’s attached to the composite video input port, click
Video.

= Ifyou want to view video from a VCR or other device
that’s attached to the S-video input port, click S-Video.

Note: If you're not sure which port a video device is
attached to, see “Determining Which Video Connector You
Need” in the section “Connecting Other Video Equipment”
in Chapter 1.

The source change takes effect as soon as you make your
choice.

Changing TV channels

When the video source is set to TV and the video window is
active, you can use any of the following methods to change
channels:

= Click the Up or Down arrow on the video window.

= Select a name from the Names pop-up menu on the video
window (if you've given names to channels, as described in
Chapter 6).

a Press the Left Arrow key or Right Arrow key on the keyboard.
(Make sure Apple Video Player is the active application, or
these keys won't have any effect.)

76 Chapter 5

= Type the channel number.

When you use an arrow, you go to the next available
unlocked channel (a channel with unrestricted access). To
go to a locked (restricted access) channel, you must enter a
channel number.

Note: See “Locking and Unlocking Channels” in Chapter 6
to learn how to restrict or grant access to channels.

To go back and forth between the current channel and the
last one to which you were tuned, press the Tab key.

Each time the channel changes, the channel name (if one
exists) appears briefly on top of the TV picture.

a Use the channel controls on the remote control. For more
information, see Chapter 9, “Using the Remote Control.”

Too many channels? When you browse through channels
using the remote control or the arrows on your keyboard or
video window, you may see channels that have no picture or
that show only static. To skip such channels entirely, see
“Programming Channels” in Chapter 6.

Adjusting the sound

You can adjust the sound’s volume, balance, and tone. You
can also choose monophonic (mono) or stereophonic
(stereo) sound.
Changing the sound volume
There are four ways to change sound volume:

= Use the volume buttons on the front of the computer.

= Drag the slider next to the speaker icon on the video
window.

Watching TV or Video 77

a Press the Up Arrow key or Down Arrow key on the keyboard.
(Make sure Apple Video Player is the active application, or
these keys won't have any effect.)

a Use the volume controls on the remote control. For more
information, see Chapter 9, “Using the Remote Control.”

To mute the sound, click the speaker on the video window,
press 88-M on the keyboard, or press the muting button on
the remote control. To turn the sound back on, click the
speaker, press 3-M, or press the remote control's muting
button. The sound will also go back on if you adjust the
volume using any method.

You can also click anywhere in a slider’s track to move the
slider to that position. The sound adjustments take effect
immediately, so you can monitor your changes.

Choosing a sound mode

When the video source is set to TV, you can control whether
the sound is mono or stereo. You can also choose the
Second Audio Program (SAP), which (when available)
broadcasts in a second language.

To set the sound mode, follow these steps:

1 Choose Show Controls Window from the Windows menu.

The Controls window appears.

2 Click the sound icon.

78 Chapter 5

The sound controls appear.
te

T¥ Sound Mode:

USED Ts

[i | 3

ag Cs
a |

3 Click the sound mode you want to use (Mono, SAP,
or Stereo).

The new mode takes effect immediately.

Adjusting speaker balance and tone

To adjust the speaker balance, bass, or treble:
1 Choose Show Controls Window from the Windows menu.
2 Click the sound icon.

3 Drag the appropriate slider to adjust the sound to your
liking.
You can also click anywhere in a slider’s track to move the
slider to that position. The sound adjustments take effect as
you make them, so you can monitor your changes.

Note: You'll only be able to hear changes in balance if
you’re using external speakers or headphones.

Watching TV or Video 79

Adjusting the picture

To adjust the brightness, sharpness, contrast, and color of
the picture:

1 Choose Show Controls Window from the Windows menu.

The Controls window appears.

2 Click the video screen icon.

The screen controls appear.

Gate

Bat CDRS gt Be

S-Video
iste Us
> __|fi|__ ie

Sharpness:
5 1 | 4
Contrast:

o =.)

3 Drag the appropriate slider to adjust the picture to your
liking.
You can also click anywhere in a slider’s track to move the

slider to that position. The picture adjustments take effect as
you make them, so you can monitor your changes.

80 Chapter 5

Customizing the
TV Tuner Settings

This chapter explains how to use the Apple Video Player
application program to give names to channels, protect
channels with a password, and set reminders that notify you
when important shows are about to begin.

Before following the instructions in this chapter, you need to
open the Apple Video Player application by double-clicking
its icon. (The application is in the Apple Video Player folder,
in the Apple Extras folder on your hard disk.) You can also
press the TV/MAC button on the remote control.

The information and instructions provided in this chapter
are meant to make using your TV tuner more convenient.
You don’t have to customize the TV tuner to watch
television on your computer, but if you don’t you'll only be
able to see a few channels. For the basic information you
need about watching TV or video, read Chapter 5.

See also: “Setting the Closed Caption and Video Text
Options” in Chapter 8.

Programming channels

Your TV tuner card can receive channels picked up by your
antenna connection (channels 2 through 69) or cable service
connection (channels 1 through 125).

You can make changes to the list of channels that are
available with a particular connection. First, you choose a
connection; then you can edit the channel list for that
connection.

Choosing a connection (antenna or
cable service)

To choose a connection so that you can edit its channel list,
follow these steps:

1 Choose Channel Setup from the Setup menu.

The Channel Setup window appears, with the channel list in
a scrollable box.

B& channel setup

Remove

Edit Name...

Connection:

82 Chapter 6

2 Open the Connection pop-up menu (under the channel list).

Le) NS
Cable
HRC Cable

3 Choose the connection you want.

The channel list changes to a list of channels available with
that connection.

About HRC Cable: Some cable services use HRC cable
frequencies instead of standard cable frequencies. If you
can’t receive channels above channel 13, try selecting HRC
Cable in the Connection pop-up menu.

Removing channels automatically

Some channels in a channel list don’t have valid signals.
You can remove such channels from the list so that they’re
skipped when you scan through the channels.

To remove channels automatically, click the Auto Tune
button. Auto Tune finds valid channels and “disables” the
rest, removing them from the channel list.

Note: Auto Tune removes invalid channels only from the
channel list for the connection selected in the Connection
pop-up menu. You may want to choose each of the other
connections and click Auto Tune to remove channels in
each channel list.

Once a channel is removed, you can still get to it by typing
its number on the keyboard. You can also make a channel
available again by adding it to the channel list manually. See
“Restoring and Adding Channels” later in this section.

Customizing the TV Tuner Settings 83

Removing channels manually

Although Auto Tune filters out channels that don’t send valid
signals, it doesn’t remove channels that send valid but
scrambled signals (for example, pay-per-view or premium
cable channels). Additionally, there may be channels in your
viewing area that you would simply prefer not to see when
you browse through channels.

Follow these steps to remove channels manually from
channel lists:

1 Choose Channel Setup from the Setup menu.

2 Choose from the Connection pop-up menu the connection
for the channel list you want to edit.

Note: You can remove channels only from the channel list
for the connection that’s currently chosen. For example, if
you remove channel 13 from the antenna channel list, it may
still be available in the Cable channel list or the HRC Cable
channel list.

3 Select the channels you want to remove.

To select several channels in a row, hold down the Shift key
and drag. To select channels scattered throughout the list,
hold down the Shift key and click each channel you want
removed.

You may have to scroll to see all possible choices.
4 Click Remove.

The channels you selected are removed from the channel
list.

84 Chapter 6

Locking channels: You may want to keep a channel in the
channel list, but restrict access to it. See “Locking and
Unlocking Channels” and “Creating and Changing a
Password” later in this chapter.

Important If you want to use Auto Tune, do so before you
manually add or remove channels. You can use Auto Tune
after you’ve added and removed channels, but doing so
undoes all your previous changes.

Restoring and adding channels

You may want to put a channel back on a channel list—for
example, when a station that was temporarily off the air
resumes broadcasting. Or you may want to add a channel—
for example, when your local cable company adds a new
station to its lineup.

Follow these steps to restore or add a channel to a channel
list:

1 Choose Channel Setup from the Setup menu.

2 Choose from the Connection pop-up menu the connection
for the channel list you want to edit.

Note: You can restore or add channels only in the channel
list for the connection that’s currently chosen. For example,
if you add channel 36 to the antenna channel list, it may still
not be available in the Cable channel list or the HRC Cable
channel list.

3 Click Add.

The Add Channels dialog box appears. If the Add button is
dimmed, all possible channels for the currently selected
signal source are already available.

Customizing the TV Tuner Settings 85

4 Select the channels you want to restore or add.

To select several channels in a row, hold down the Shift key
and drag. To select channels scattered throughout the list,
hold down the Shift key and click.

You may have to scroll to see all possible choices.

5 Click Add.

The channels you selected are added to the channel list.

Giving names to channels

You can assign a name of up to 15 characters to a channel.
The name can be the station’s call letters, network affiliation,
network name, or anything else you want.

Channel names appear in the Names pop-up menu of the
video window. See “Changing TV Channels” in Chapter 5 for
information on using a name to select a channel.

Follow these steps to name or rename channels.
1 Choose Channel Setup from the Setup menu.

2 Choose from the Connection pop-up menu the connection
for the channel list you want to edit.

Note: You can name or rename channels only in the
channel list for the connection that’s currently chosen.
For example, if you give channel 13 a name in the antenna
channel list, the name will not appear in the cable channel
list or the HRC cable channel list unless you name it in
those lists.

86 Chapter 6

3 Select a channel from the channel list, then click Edit Name.
Or, you can double-click the channel number or name.

The Edit Name dialog box appears, with any name already
assigned to the channel selected. (Initially, channels have no
names assigned to them.)

Channel: 12

Name: | [_
CR

4 Type a name for the channel.

To remove a name from the channel, press the Delete key
while the entire name is highlighted.

5 Click OK.

The name you typed appears to the right of the channel
number in the channel list.

Channel Setup

ABC
Preview

CBS
Public T¥

Wally's Hite
Fox

Customizing the TV Tuner Settings 87

Locking and unlocking channels

Locked channels appear in the channel list but don’t appear
in the video window when you scan through the channels.

1 Choose Channel Setup from the Setup menu.
2 Choose from the Connection pop-up menu the connection
for the channel list you want.

Note: You can lock or unlock channels only in the channel
list for the connection that’s currently chosen. For example,
if you lock channel 15 in the antenna channel list, the
channel will not be locked in the cable channel list or the
HRC cable channel list unless you name it in those lists.

3 Select the channels you want to lock by highlighting them.

To select several channels in a row, hold down the Shift key
and drag. To select channels scattered throughout the list,
hold down the Shift key and click all the channels you want
to lock.

You may have to scroll to see all possible choices.

8s Chapter 6

4 Click Lock.

The channels you selected are locked. Small locks appear at
the left of the locked channels’ numbers in the channel list.

Channel Setup

Preview

CBS

Public T¥
Violent Hetwork
Wally's Mite
Fox

Hot for Billie!

You can watch a locked channel by typing its number on the
keyboard. A dialog box appears:

Channel 6 is locked. Would you like to
enable it?

If you click Yes and no password is in effect, you tune in to
that channel. However, the channel remains locked and out
of the normal scanning sequence. If a password has been set,
you must type the password before the channel can become
available.

To unlock a channel, choose Channel Setup from the Setup
menu, select the channel, and click Unlock.

Customizing the TV Tuner Settings 89

Creating and changing a password

You can create a password to limit access to the Channel
Setup dialog box and locked channels. When you set a
password, anyone choosing Channel Setup from the Setup
menu or switching to a locked channel must type the
password.

eS Verify Channel Password

To enable the locked channel, enter the
channel password

Password:

Clue: the customary habit of birds

oan

The same password applies to all locked channels.
Creating a password
Follow these steps to create a password:

1 Choose Set Channel Password from the Setup menu.

A dialog box appears.

Set Channel Password

The channel password is used to limit
access to “Channel Setup” and to locked
channels.

Password:

Clue:

90 Chapter 6

2 Type a word or phrase of up to 15 characters.

You can also type a clue to help you remember the
password. The clue appears every time anyone seeking
access is asked for the password.

If you don’t want to have a clue, don’t type one.

3 Click OK.
Your password is now in effect.

Important Make sure you keep a record of your password.
If you forget your password, you will have to reset all your
customized settings (including channel names and
programmed channels) when you invalidate it, as described
in “Forgetting a Password,” later in this section.

Changing a password
Follow these steps to change a password:
1 Choose Set Channel Password from the Setup menu.

A dialog box appears.

ay Uerify Channel Password

Before you can change the passvord, you
must enter the current password.

Password: ||

Customizing the TV Tuner Settings 91

2 Type the current password.

If you've forgotten your password, see the next section,
“Forgetting a Password.”
As you type, the characters are replaced by bullets to ensure
privacy.

3 To change to a new password, click OK. Then follow steps
2 and 3 in “Creating a Password,” earlier in this section.

To remove the password (so a password is not required),
make sure that the password in the Password text box is
selected (highlighted). Then press the Delete key before you
click OK.

Forgetting a password

If you enter an incorrect password, you see this dialog box:

try again.

If you can’t remember your password, you must reset the
password and then create a new one.

To reset the password, quit the Apple Video Player
application. Then move the Apple Video Player Prefs file to
the Trash. The Apple Video Player Prefs file is in the
Preferences folder, which is in the System Folder.

Important When you move the Apple Video Player Prefs
file to the Trash, any preferences you have set (for example,
picture contrast or channel names) are changed back to the
standard settings provided by the Apple Video Player
application.

92 Chapter 6

Setting and editing TV reminders

You can arrange to have notices appear on your screen to
remind you that specific shows are about to begin.

When the time you've set for a reminder arrives, a notice
appears on the screen.

f=) The show “Star Trek—The Next
Generation” is on right now. Would you

like to watch it?

coe) CQ

The notice appears no matter which application program
you are using on your computer at the notification time.

If you click OK in this notice, the Apple Video Player
application opens, switches to the proper channel, and
displays the show in the video window.
Setting a reminder
To set a reminder, follow these steps:

1 Choose TV Reminders from the Setup menu.

The TV Reminders dialog box appears.

ay TU Reminders

Hame ‘When
Gateway to Heaven Sunday 2:30 AM

Star Trek—The Next Gener Wednesday 2:00 PM Add
‘wally : 36 Thursday ae

Edit...

cman CE)

Customizing the TV Tuner Settings 93

2 Click Add.

The Edit Reminder dialog box appears.

&) Edit Reminder

Name:

When: Wednesday +] 12 yi] 307] PM yi]

Channel: |2 Fox ¥

How often: @ Ongoing © One Time Only

Warn me |5 | minutes before show

3 Type the show’s name as you want it to appear in
the notice.

4 Set the day and time that the show begins.

5 Set the channel by typing its number in the Channel number
box.

If the channel has a name, you can select the name in the
pop-up menu to the right of the Channel number box.

6 Specify whether the reminder should occur on an ongoing
basis or just once.

If you select One Time Only, the reminder will be removed
automatically after the show airs.

7 Ifyou want an advance notice before the show begins, type
the number of minutes before the show starts that you want
a warning; then click the “Warn me” checkbox to select it.

The notice can appear up to 99 minutes before show time.

94 Chapter 6

8 Click OK.
You'll return to the TV Reminders dialog box, where you'll
see your new entry in the list.
Editing a reminder
To edit a reminder, follow these steps:
1 Choose TV Reminders from the Setup menu.
The TV Reminders dialog box appears.
2 Select the reminder you want to edit, then click Edit.
Or, you can double-click the reminder.
The Edit Reminder dialog box appears.
3 Make the changes you want to, then click OK.

The changes you've made take effect immediately.

Removing a reminder
To remove a reminder, follow these steps:

1 Choose TV Reminders from the Setup menu.
The TV Reminders dialog box appears.

2 Select the entry you want to remove.

Important There is no Undo function for the Remove
command. To restore an entry that you have removed, you
must reenter all the settings you made in the Edit Reminder
dialog box.

3 Click Remove.

The entry is removed immediately.

4 Click OK to close the TV Reminders dialog box.

Customizing the TV Tuner Settings 95

Setting a hot key

You can turn on the Apple Video Player application by
pressing a “hot key” (a preset key or combination of keys).
When you press this hot key, you switch to the Apple Video
Player application no matter what application you are
currently in. If the Apple Video Player is already the active
application, pressing the hot key quits the Apple Video
Player application.

To set a hot key, follow these instructions:
1 Choose Hot Key from the Setup menu.
The Hot Key dialog box appears.

2 Press the key or key combination you want to use for your
hot key.

You can use one or more (up to four) of the modifier
keys—g8, Option, Control, and Shift—plus any other key.

Don’t use a key combination that is already used by other
programs. For example, don’t use $8-P, which is for printing
in most programs.

3 Click OK.
Your new hot key is ready to use.

If you find that your hot key replaces a keyboard shortcut
in another program, repeat these steps to choose another
hot key.

96 Chapter 6

Capturing TV and Video Images

This chapter gives instructions for using the Apple Video
Player application program to capture

individual (still) images
sequences of moving images (as QuickTime movies)

The images in the video window can come from the TV
tuner or from video equipment connected to your video
input card.

Capturing individual images

You have two ways to capture a single image—by using the
capture controls in the Controls window or by using the
Copy Video Display command in the Edit menu.
Capture controls

When you use the capture controls in the Controls window,
you can freeze the screen image before you save it.
Additionally, the capture controls let you save the image
directly on a disk.

Follow these steps:

1 Choose Show Controls Window from the Windows menu.

The Controls window appears.

2 Click the video camera icon.

The capture controls appear.

Prey ht i Chae

—

ECC o Oa Wt ead mT
PAPC RAN Oh ATA) am
CTE Merle Rae

98 Chapter 7

3 Wait until you see the image you want to capture.

The Controls window can remain open without affecting
what happens in the video window.

= To freeze the video image at the current frame, click Freeze.

The video freezes, and you can decide whether you want to
save the current frame.

To unfreeze the video, click Freeze again.
a To save the current video frame on a disk, click Save.

If the video isn’t already frozen, it freezes at the current
frame until you complete the Save operation.

A dialog box appears so you can specify where to save the
image. When you click Save, the image is saved as a PICT file
under the name that you supply. (A PICT file can be opened
by most graphics applications.)

Copy Video Display command

To capture the current screen image by copying, choose
Copy Video Display from the Edit menu or press $8-C.

Important When you use Copy Video Display or press
38-C, the current screen image is copied to the Clipboard.
The image is not saved on a disk. (To save an image that’s
on the Clipboard, you must paste it into a document or
the Scrapbook.)

Capturing TV and Video Images 99

Capturing movies

You can capture video sequences (moving images) as
QuickTime movies.

Video capture does not work as well with virtual memory
on. For best results, turn off virtual memory. To check
whether it is on or not, open the Memory control panel.

If the On button for virtual memory is selected, click the Off
button to turn virtual memory off.

To capture video images, follow these steps:

1 Make sure networking or printing is not active and virtual
memory is turned off.

For best results recording video, you should quit networking
or printing applications and turn off virtual memory. To
check whether virtual memory is on or not, open the
Memory control panel. If the On button for virtual memory
is selected, click the Off button to turn virtual memory off,
and restart your computer.

2 Adjust the volume to your liking.

Movies are captured at the current volume setting. For
example, if the sound is muted, your recorded movie will
not have any sound.

3 Choose Show Controls Window from the Windows menu.

The Controls window appears.

100 Chapter 7

4 Click the video camera icon.

The capture controls appear.

Phage by

Pee gt ia Oa ae

—

Capture Movie:

—

Note: Reducing the size of the
PaO Oh TA ea mC
CUE Me ila Rha

5 Wait until the sequence that you want to capture begins.

The Controls window can remain open without affecting
what happens in the video window.

6 Click Record.

Recording begins and the Record button changes to a
Stop button.

7 Click Stop when you've recorded as much as you want.

Important [f you don’t click the Stop button, recording
continues until the hard disk is full.

A dialog box appears, in which you can specify a name and
location for your movie.

You can also preview the QuickTime movie before you
save it.

Capturing TV and Video Images 101

Use as small a size as you can: The amount of disk
storage that a movie takes is directly related to the size of
the video window—the larger the window, the more disk
space you use. By choosing Smallest Size from the Windows
menu before you record, you may be able to save more than
50 percent in storage space. (A movie that uses about

75 megabytes per minute at the normal video window size
will use only about 35 megabytes per minute at the smallest
video window size.) See “Changing the Video Window Size”
in Chapter 8.

You can open the movie from within any application that
supports QuickTime, such as SimpleText. (QuickTime is a
system software extension that comes with your computer.)

102 Chapter 7

Using compression

With compression you can store movies in a much smaller
space than they would normally require. To use
compression, follow these steps before you record a movie:

1 Choose Preferences from the Setup menu.

The Preferences dialog box appears.

[3] Preferences

Remote Control:
Disable Remote Control
Confirm Power Off

ideo Input Standard:
@NTSC OPAL (SECAM

cco) CH)

2 Click one of the buttons under Movie Compression.

None means that no compression takes place. Normal, the
preset choice, uses anywhere from 12 to 50 percent of the
disk space that None uses; the less movement in each frame
of the movie, the greater the savings. Most uses slightly less
disk space than does Normal.

To save the most space you can, choose the smallest size
video window and the most compression.

Note: Compression affects picture quality: the more
compression you use, the grainier the picture.

Capturing TV and Video Images 103

Other Features

This chapter gives instructions for using the following special
features of the Apple Video Player application program:

setting closed caption and video text options

changing the size of the video window

changing the color of the windows

setting the video input standard (NTSC, PAL, or SECAM)

Apple Video Player

Setting the closed caption and video
text options

Some broadcast and cable TV programs feature closed
caption text tracks for people with impaired hearing. In
some areas, video text tracks that display programming
schedules, news, or financial data are available. When your
video source is set to TV, you may be able to take advantage
of special tracks.

Note: If you have a videotape with closed captions (for
example, if you’ve recorded a TV show with closed
captions), the captions can only be viewed if your VCR is
connected to the TV tuner card. (For instructions, see the
Appendix, “Viewing Closed Captions on Videotape.”)

1 Choose Show Controls Window from the Windows menu.

The Controls window appears.

2 Click the CC icon.

The closed captioning controls appear.

Phage ey

Pee eT SCL
=
—| wo |
—| we |

mes] Text 1

mes] Text 2

Taare me en)
select [6C)1 if you want to
use closed captioning.

106 Chapter 8

3 Click the track you want to use.

CC 1 provides closed captions for most broadcasts that have
this feature. CC 2 sometimes provides captions in a second
language. Text 1 may provide schedules of programs
broadcast on a channel. Text 1 or Text 2 may provide
specialized text for TV.

The track you select applies to all channels, although some
channels may not provide the feature.

Changing the video window size

There are several ways to change the size of the video
window. You can choose a command from the Windows
menu, use a keyboard shortcut for one of the three most
common sizes, click the zoom box, drag the size box, or use
the remote control. (All but the last way are explained in this
section. The remote control is explained in Chapter 9.)

Choosing menu commands

You can choose different video window sizes from the
Windows menu:

a Smallest Size uses about 1/16 of the screen.
a Normal Size uses about 1/4 of the screen.
a Largest Size uses as much of the screen as it can.

On monitors that are 640 by 480 pixels or smaller, Largest
Size hides both the menu bar and the screen controls.
Moving the mouse makes the menu bar visible.

Other Features 107

a Other Size opens a dialog box in which you can enter the
size you want.

Gr Other Size.

Enter the new window size:

Width: Height: |278

Width must be in the range 160 to 640 pixels. Height must
be in the range 120 to 480 pixels.

Keep your proportions: The usual video window width-to-
height ratio is about 4 to 3. Setting other proportions
distorts the video image.

Using keyboard shortcuts and the zoom box

There are three keyboard shortcuts for changing the video
window size:

m 3-1 sets the smallest size.
m 38-2 sets normal size.
= 3-3 sets the largest size.

To alternate between the current size and the largest size,
click the zoom box .

108 Chapter 8

Dragging the size box

If you drag the size box, the horizontal and vertical
dimensions of the screen change proportionally.

If you drag the size box while holding down the Shift key,
the image becomes distorted. (It stretches or shrinks in the
direction that you drag.)

Changing the window color

You can set a new color for the border surrounding the
video window by choosing Window Color from the Windows
menu. The current color is checked. The choices are Dark
Gray, Green, Blue, Magenta, Red, and Gold.

“Window Color” is not the display color: The Window
Color command has no effect on the colors you see in the
video window. For information on setting the brightness,
sharpness, contrast, and color in the video window, see
“Adjusting the Picture” in Chapter 5.

Other Features 109

Setting the video input standard

The video input standard determines how the Apple Video
Player application interprets video signals. This standard is
preset to your region in the Apple Video Player software. In
most cases, you won't need to change it.

NTSC is the standard video signal for most of the Americas
and Japan. PAL is common in Western Europe, Australia,
most of Asia, and parts of South America and Africa. SECAM
is used in France, Eastern Europe, and parts of Asia and
Africa.

To change the video input standard, follow these steps:

1 Choose Preferences from the Setup menu.

The Preferences dialog box appears.

[3] Preferences

Remote Control:

Disable Remote Control
Confirm Power Off

2 Choose the Video Input Standard setting you need.

If the setting you choose produces a strange image (for
example, the picture is too small or the colors are odd), try
another setting.

110 Chapter 8

Cc H AP T E R

Using the Remote Control

Before using the remote control, install the batteries that are
included in your package.

You can use your remote control to
turn the computer on and off

switch easily between watching TV or video, and using other
computer application programs

control the sound of the radio or TV
change TV channels or radio stations
manipulate the size of the video window

If your computer has a CD-ROM drive, you can also use the
remote control to

control the sound from an audio CD

stop and eject a CD or CD-ROM disc
pause and continue play of an audio CD
move to the previous track of an audio CD

move to the next track of an audio CD

Controlling your FM radio

Turns muting

on and off

Adjusts volume

fis

VOLUME

TV/MAC

Turns the
computer on
and off

Cycles among
the six main
preset stations

Note: Your remote control may look different from the
one shown here, but it includes the same buttons.

Chapter 9

You cannot use the remote control to switch to the Apple
FM Radio from another application. However, while you hear
the radio (whether or not the Apple FM Radio application is
open), the Apple FM Radio remote controls will work.

When you press the TV/MAC button while the radio is
playing, the Apple Video Player application starts, but you
won't hear the TV or video until you quit the Apple FM Radio
application.

If you are playing an audio CD in a CD-ROM drive, you hear
the audio CD and the TV or FM radio sounds simultaneously.

Using the Remote Control 113

Controlling TV or video

Turns muting
on and off

Adjusts volume

Switches video
window between
current and
largest size

DISPLAY TV/MAC

STOP/EJECT

REV PLAY/PAUSE FWD.

Turns the
computer on
and off

Changes
TV channels

Switches between
the video window
and computer
programs

Note: Your remote control may look different from the
one shown here, but it includes the same buttons.

Chapter 9

Controlling your CD-ROM player

Turns muting

on and off

Adjusts volume

Stops/ejects CD

Goes to
previous track
on audio CD

REV PLAY/PAUSE FWD

Nee

Turns the
computer on
and off

Plays/pauses CD

Goes to next
track on
audio CD

Note: Your remote control may look different from the
one shown here, but it includes the same buttons.

Using the Remote Control

Setting preferences

You can set two preferences for the remote control. The first
is whether the remote control is on or off, and the second is
whether a confirmation box appears when you press the
remote control’s Power button to shut down the computer.

1 Choose Preferences from the Setup menu.

The Preferences dialog box appears.

[z3] Preferences

Remote Control:
Disable Remote Control
Confirm Power Off

2 To turn off the remote control, click the Disable Remote
Control checkbox to put an X in it.

If this checkbox is selected, the remote control won’t work.
To turn the remote control back on, click the checkbox to
remove the X.

3 To make a confirmation box appear so you can change your
mind about shutting down the computer when you press
the remote control’s Power button, click the Confirm Power
Off checkbox to put an X in it.

If you no longer want to see the confirmation box, click the
checkbox to remove the X.

4 Click OK.

The changes take effect immediately.

116 Chapter 9

Troubleshooting

This chapter suggests what to do if problems occur when
you’re using the Apple Video Player or FM Radio software.

Warning Ifyou have a problem with your Apple
equipment and nothing presented in this chapter or in the
documentation that came with your computer solves it,
consult the service and support information that came with
your Apple equipment for instructions on how to contact an
Apple-authorized service provider or Apple for assistance.

If you attempt to repair the Apple equipment yourself,

any damage you may cause to the Apple equipment will
not be covered by the limited warranty on your Apple
equipment. Contact an Apple-authorized dealer or service
provider for additional information about this or any other
warranty question.

Problems listening to the radio
You can’t find the Apple FM Radio application.

If the Apple FM Radio application is not anywhere on your
hard disk, you need to install it.

You install Apple FM Radio from your system software CD,
system software disks, or the 7V/FM Software installer disks,
depending on the disks or CDs you received with your
equipment.

1 Start the computer.

2 Insert the CD or disk that contains the Apple FM Radio
application.

= Ifyou purchased your computer with the TV/FM tuner

card already installed, locate either the system software
CD or the set of system software floppy disks (whichever
came with your computer). If you have a system software
CD, insert it into the CD-ROM drive. If you have a set of
system software floppy disks, insert the first disk (labeled
something like Install Disk 1 or System Backup Disk 1)
into the floppy disk drive.

= Ifyou purchased the Apple TV/FM Radio System kit
separately from your computer, insert the 7V/FM Software
Install Disk 1 into the floppy disk drive.

3 Double-click the CD or disk icon to open it (if its window is
not already visible).

4 Double-click the Installer icon.

118 Chapter 10

5 Install the Apple FM Radio application.

«= If you are installing from the 7V/FM Software Install Disk 1
disk, click Install and follow the instructions on the screen.

«= If you are installing from your system software CD or disks,
click Custom Install. Select Apple FM Radio from the
software list that appears, and then click Install.

The Apple FM Radio application is installed on your
hard disk (in the Apple FM Radio folder in the Apple
Extras folder).

6 When installation is complete, click Restart.

You don’t hear anything when you open the Apple
FM Radio application.

= Be sure your FM antenna is securely connected to the FM
port (the left port) on the TV/FM tuner card and the antenna
is raised high. See “Making Connections to the TV/FM Tuner
Card,” in Chapter 1, for your computer type.

= The radio sound doesn’t work if Video or S-Video is
selected in the Apple Video Player application (even if that
application isn’t currently open). Open the Apple Video
Player application and choose Show Controls from the
Windows menu. Click the video screen icon (the second
button down on the left). Choose TV as your video source.
You can then quit the Apple Video Player application.
Now when you open the Apple FM Radio application, you
will hear radio.

Troubleshooting 119

= Be sure the volume on your computer is turned up. Use the
volume buttons on the front of your computer if you have
them, or use the sound-related control panel to adjust the
volume. (For more information on adjusting volume, see
Macintosh Guide if it is available on your computer, or the
printed manuals that came with your computer.)

= You may need to broaden the signal range or strength. Make
sure the Apple FM Radio application is active. Open the
Options menu, choose Signal Range or Signal Strength, and
choose “DX” for Signal Range and “All Stations” or “All
Except Weakest” for Signal Strength. For instructions on
choosing a signal range or strength, see Chapter 3,
“Customizing the FM Radio Settings.”

The reception is poor.

a Adjust the FM antenna (connected to the left port on the
TV/FM tuner card). Be sure it is securely connected to the
port and raised high.

The remote control doesn’t work.

a Make sure the remote control has a battery, or try changing
the remote control's battery.

= Try moving closer to your computer. If you are already very
close to the computer, point the remote control directly at
the remote control receiver on the front of the computer.

a The checkbox labeled Disable Remote Control may be
selected in the Preferences dialog box in your TV
application. Open Apple Video Player and choose
Preferences from the Setup menu. Deselect the Disable
Remote Control checkbox (click to remove the X).

120 Chapter 10

You can’t switch to radio using the remote
control, or quit the radio using the remote control.
= There isn’t a way to turn the radio on or off using the remote
control.
When you click Seek or Auto Add, Apple FM Radio
finds either too few or too many stations.
= If Apple FM Radio is finding too few clear stations, adjust the
FM antenna (the one connected to the left port on the
TV/EM tuner card) while the radio is playing to see if some
stations come in clearer.

= If Apple FM Radio is finding “fuzzy” stations when it scans or
adds stations, you may need to narrow the signal range
or strength. Make sure the Apple FM Radio application is
active. Open the Options menu, choose Signal Range or
Signal Strength, and choose another setting. See what that
does to the Scan and Auto Add features. Experiment with
different settings to see which setting eliminates the
stations you want eliminated. For instructions on choosing
a signal range or strength, see Chapter 3, “Customizing the
FM Radio Settings.”

Troubleshooting 121

Problems watching TV or video
You can’t find the Apple Video Player application

If the Apple Video Player application is not anywhere on
your hard disk, you need to install it.

You install Apple Video Player from your system software
CD, system software disks, or the 7V/FM Software installer
disks, depending on the disks or CDs you received with your
equipment.

1 Start the computer.

2 Insert the CD or disk that contains the Apple Video Player
application.

= Ifyou purchased your computer with the TV/FM tuner

= Ifyou purchased the Apple TV/FM Radio System kit
separately from your computer, insert the 7V/FM Software
Install Disk 1 into the floppy disk drive.

3 Double-click the CD or disk icon to open it (if its window is
not already visible).

4 Double-click the Installer icon.

122 Chapter 10

5 Install the Apple Video Player application.

If you are installing from the 7V/FM Software Install Disk 1
disk, click Install and follow the instructions on the screen.

If you are installing from your system software CD or disks,
click Custom Install. Select Apple Video Player from the
software list that appears, and then click Install.

The Apple Video Player application is installed on your
hard disk (in the Apple Video Player folder in the Apple
Extras folder).

6 When installation is complete, click Restart.

Your remote control doesn’t work.

The checkbox labeled Disable Remote Control may be
selected in the Preferences dialog box. Choose Preferences
from the Setup menu and deselect this checkbox (click to
remove the X).

Try changing the remote control's battery.

Try moving closer to your computer. If you are already very
close to the computer, point the remote control directly at
the remote control receiver on the front of the computer.
You can’t switch to TV when you press the
TV/MAC button on the remote control.

You may not have selected TV as your video source. Choose
Show Controls Window from the Windows menu and click
the TV Video Source button.

You can’t switch to radio using the remote
control, or quit the radio using the remote control.
There isn’t a way to turn the radio on or off using the remote
control.

Troubleshooting 123

The Power button on your remote control doesn’t
work.

= You may have left a dialog box open. Close any open dialog
box, then try the Power button again.

You see static or a blank screen when you try to
watch TV or video.

= Be sure your video equipment is securely connected to
the appropriate video input port and your equipment is
turned on.

= Be sure your antenna or cable service is securely connected
to the coaxial port on the TV/FM tuner card.

= You may have the wrong video source selected. Go to the
screen controls in the Controls window and click the
appropriate Video Source button.

= Some static may result from poor reception over an antenna,
or from problems with cable service. Review the instructions
that came with your antenna or cable, or call the supplier for
assistance.
The image is too small or it’s filled with odd
colors.

= The video input standard is set incorrectly. Choose
Preferences from the Setup menu and select a different
setting.
You see a message that the built-in digitizer
cannot display video in the current monitor
setting.

= Reduce the number of colors or levels of gray your monitor
displays, using the control panel for monitors. (For more
information on adjusting a monitor, see Macintosh Guide if
it is available on your computer, or the print manuals that
came with your computer.)

124 Chapter 10

The image is too white or too dark.

= Adjust the video screen controls. (Choose Show Controls
Window from the Windows menu and click the video
screen icon.)

= Ifyou have a VCR connected to your video input card, make
sure you're not having a problem with the videotape or the
VCR itself. (Connect the VCR back to your TV and play the
tape to see if the image is still bad.)

= The voltage output of your video equipment may be too
high or too low for the video input card. Therefore, your
video equipment may be sending video signals that are too
strong (causing a white picture) or too weak (causing a very
dark picture) for the video input card. Try connecting
different video equipment to the card.

You have a dark or “rolling” picture.

= Adjust the video screen controls. (Choose Show Controls
Window from the Windows menu and click the video
screen icon.)

= If your computer is also connected to a secondary monitor,
make sure that your connection goes from the VCR to the
monitor, ending at the video input card. (The connection
must end at the video input card, not the secondary
monitor.) Also check that your secondary monitor is set to
loop-through (also known as “Hi-Z”) input.

Troubleshooting 125

You don’t hear the TV, or you hear the radio
instead of the TV.

a Make sure you have quit the Apple FM Radio application. To
do so, click the FM Radio window to make it active, then
choose Quit from the File menu. (You can watch TV and
listen to the radio at the same time, but the radio sound
takes precedence.)

The sound is intermittent or clipped.

= Turn down the volume controls on your video equipment.
They may be set too high for the video input card.

= The voltage output of your video equipment may be too
high for the video input card. Therefore, your video
equipment may be sending signals that are too strong for the
video input card. Try connecting different video equipment
to the card.

The sound is full of static.

a Adjust the sound controls in the Controls window. (Choose
Show Controls Window from the Windows menu and click
the sound icon.)

= Turn up the volume controls on your video equipment.

126 Chapter 10

Unexpected things happen when you try to switch
modes using a keyboard shortcut.

= Ifyou can switch between TV and computer using the
remote control, but have trouble switching using the
keyboard, check the hot key by choosing Hot Key from the
Setup menu. Be sure the key combination is not used by one
of your other programs. For instance, in most Macintosh
programs $€-P sends a document to the printer. On the
desktop, $8-N creates a new untitled folder.
You have a cable service and you can’t see any
channels above channel 13.

= Some cable services use HRC cable frequencies instead of
standard cable frequencies. If you can’t receive channels
above channel 13, choose Channel Setup from the Setup
menu and select HRC Cable from the Connection pop-up
menu.
You can’t see the Names pop-up menu on the
video window.

= You haven't given a name to any channel. See “Giving Names
to Channels” in Chapter 6.

= You may have the wrong signal source selected. Each signal
source (antenna, or standard or HRC cable) has its own
channel list and potential list of channel names. Choose
Channel Setup from the Setup menu and make a different
choice from the Connection pop-up menu.

= Ifyou had to reset your password because you forgot it, any
names you entered earlier for channels were erased. You
need to enter the names you want again. See “Giving Names
to Channels” in Chapter 6.

Troubleshooting 127

You can’t see the volume slider on the video
window.

= The video window is too small or too large. Change the size
by making a choice from the Windows menu or by dragging
the size box.
Your password doesn’t work, or you forgot your
password.

= See “Forgetting a Password,” in the section “Creating and
Changing a Password” in Chapter 6 for instructions on
invalidating a forgotten password so that you can create
another password.
You can’t see closed captions when watching a
channel that provides them.

= The video window must be set to Normal Size or greater to
see closed captions. Change the size by making a choice
from the Windows menu or by dragging the size box.

= Quit networking or printing applications if they are active.
Closed captioning does not work well when networking or
printing is active.

128 Chapter 10

You're playing a videotape with closed captions,
but the closed captions do not appear.

= To view a videotape with closed captions, you must connect
your VCR to a TV tuner port, not the video input card. For
instructions on connecting the VCR to the TV tuner port, see
the Appendix, “Viewing Closed Captions on Videotape.”

Troubleshooting 129

Viewing Closed Captions
on Videotape

If you want to view closed captions on a videotape that has
them, you must connect the VCR to the TV/FM tuner card.
(Normally, the VCR is connected to the video input card.)

131

To connect the VCR to the TV/FM tuner card, remove the
cable that is attached to the TV tuner from the TV (keep the
other end of the cable attached to the TV tuner port on the
card). Then attach the cable to the video out port on the
VCR (remove the cable that is attached there now).

aaa

OE az

Co D\

——

Attach the coaxial cable
to the TV tuner port. The
TV tuner port is marked
with the Dicon.

“Attach the other end of the coaxial cable to
the video out F-connector port on your VCR.

Now when you view the videotape with closed captions on
the computer, the closed captions appear with the video in
the video window.

Connect the TV tuner cable back to the TV when you want to
watch TV again.

132 Appendix

access cover for the TV/FM
tuner
on a compact computer
5, 14-15
ona modular
computer 27
Add Channels dialog box
(Apple Video
Player) 85
Add Preset Stations (Options
menu/Apple FM Radio)
52, 54-55, 57
alert sound 62, 63
antenna TV connection
82-83
Apple-authorized
dealer/service provider
purchasing a replacement
access cover for the
TV/EM tuner 5
purchasing a TV tuner
card 129
purchasing a video input
card 3
warranty questions 117
Apple FM Radio application
customizing settings
51-63
installing 42-43
listening to the radio
45-50
opening 46, 51
recording radio sound
65-69
troubleshooting 118-121

Apple FM Radio folder 46,
51, 65
Apple FM Radio Guide 47
Apple Video Player
application
customizing settings
81-96
installing 42-43
opening 72, 81, 97, 105
opening with a hot key
74, 96
recording from TV or
video 97-103
troubleshooting 122-129
watching TV or video on
your computer 71-80
Apple Video Player folder
72,81
Apple Video Player Guide
73-74
Apple Video Player Prefs
file 92
Apple Video Player
Shortcuts 74
arrow keys on the keyboard
49, 76, 78
attaching connections to the
tuner card
compact computers
22-25
modular computers
30-33
viewing closed captions
and 23, 31, 129,
131-132

133

audio cables, Y-adapter 36,
37, 39, 40

audio out ports on video
equipment 36-41

Auto Add feature for radio
stations 56-57, 61, 121

Auto Tune feature 83

back panel on a compact
computer, reattaching
18-21

balance and tone, adjusting
for TVWideo 79

bass, adjusting for
TVAvideo 79

beep, turning off 63

blank screen when watching
TV, troubleshooting 124

brightness of picture,
adjusting 80

cable service TV connection
choosing 82-83
troubleshooting 127
call letters, displaying on
preset radio station
buttons 55, 58-59
capture controls 98, 101
capturing TV and video
images 97-103
CD-ROM player, controlling
with the remote
control 115
changing
Color of Current Station
Text 62
passwords 91-92
preset radio stations 59

134

TV channels 76-77
TV reminders 95
video input standard 110
video window border
color 109
video window size
107-109
channel controls on the
remote control 77
channel list, displaying 82
channels
adding/restoring 85-86
changing 76-77
locking/unlocking 88-89
naming 86-87
removing 83-85
Channel Setup dialog box
82-83, 87, 89
Channel Setup (Setup
menu/Apple Video
Player) 82-89, 127
choosing
captured movie
compression rate 103
radio recording
compression rate
66-67
radio signal range and
strength 60-61,
120, 121
radio sound mode 50
TV connection type
82-83
TV/video sound mode
78-79
video source 75-76
clearest stations
presetting 56-57
tuning into 48

Index

Clipboard, copying screen
images to 99
closed captioning controls
106-107
closed captions
setting options for
106-107
troubleshooting 128-129
viewing on a videotape
23, 31, 129, 131-132
coaxial cable connectors,
illustration 23, 31
color
of picture, adjusting 80
of text showing Current
Station 62
of video window
border 109
compact computer, installing
the TV/FM tuner card
in 4-25
composite video connectors
35, 36-38
composite video port (RCA-
type) 35
compression
for captured movies 103
for radio recordings
66-67
connecting
FM and TV antennas
22-25, 30-33
a VCR to the tuner card
for closed caption
viewing 23,31, 129,
131-132
video equipment 36-41
connection type for TV,
choosing 82-83

Index

connectors, determining
which type you
need 35
contents of your package 2
contrast of picture,
adjusting 80
Controls window (Apple
Video Player) 75-76,
78-80, 98-101, 106
copying a screen image to
the Clipboard 99
Copy Video Display (Edit
menu/Apple Video
Player) 99
customizing
FM radio settings 51-63
TV tuner settings 81-96

date and time control
panel 24
descriptions, displaying on
preset radio station
buttons 58-59
disabling the remote
control 116
disk storage required for
recorded movies
compression and 103
video window size
and 102
displaying. See also viewing
channel list 82
information on preset
station buttons 58-59
keyboard shortcuts for
Apple Video Player 74
preset radio stations 55
TV reminders 93
DX range, choosing for radio
stations 60, 120

135

editing TV reminders 95

Edit menu (Apple Video
Player), Copy Video
Display 99

Edit name dialog box (Apple
Video Player) 87

Edit Reminder dialog box 94

electrostatic discharge
damage, avoiding 6, 26

FM antenna
adjusting 119, 121
attaching to a compact
computer 22
attaching to a modular
computer 30
positioning for best
reception 25, 33
FM radio. See radio
FM Radio Preferences
window 58-59, 62-63,
66-67
FM Radio window 46-49,
52-57, 68
FM tuner port
on a compact
computer 22
on a modular
computer 30
forgetting a password 91, 92,
127, 128
freezing/unfreezing a video
image 99

136

frequencies
displaying on preset
buttons 58
typing 55, 59
F-type coaxial cable
connectors, illustration
23,31

guides
on a compact computer
16
ona modular computer
29
under the logic board
tray 13

handling the TV/FM tuner
card 11
help on screen
Apple FM Radio 47
Apple Video Player 73-74
hot key
troubleshooting 127
using to open Apple
Video Player 74, 96
HRC cable frequencies
83, 127

I,J
icons
Apple FM Radio 43, 46,
51, 65
Apple Video Player 43, 72,
81, 97, 105
Installer 42
sound 78
video camera 98
video screen 75, 80

Index

individual video images,
capturing 98-99
installing
Apple FM Radio 42-43,
118-119
Apple Video Player
42-43, 122-123
the TV/FM tuner card ina
compact computer
4-25
the TV/FM tuner card in a
modular computer
26-33
invalid channels, removing
from the list 83-85

keyboard control panel,
checking settings 24
keyboard shortcuts
for changing video
window size 108
displaying for Apple Video
Player 74
problems switching
modes 127

labeling preset radio station
buttons 58-59
local range, choosing for
radio stations 60
locking/unlocking channels
77, 88-89
logic board
removing 6-10
replacing 16-21
logic board tray 13

Index

Memory control panel 100
modular computer, installing
the TV/FM tuner card
in 26-33
monitor, connection
problems with
secondary monitor 125
monophonic (mono) sound
for the FM radio 50
for TV/video 78-79
mouse control panel 24
movies, capturing 100-103
moving a preset radio
station to a different
button 59
muting TV/video sound 78

N
naming
captured movies 101
radio recordings 69
TV channels 86-87
NTSC video input
standard 110
numbers, displaying on
preset radio station
buttons 58

oO
on-screen help
Apple FM Radio 47
Apple Video Player 73-74
opening
Apple FM Radio 46, 51
Apple Video Player 72, 81,
97, 105
Apple Video Player using a
hot key 74, 96
a movie you've
captured 102

137

Options menu (Apple FM

Radio)

Add Preset Stations 52,
54-55, 57

Preferences 58-59,
62-63, 66-67

Signal Range 60, 120, 121

Signal Strength 61,
120, 121

Sound 50

package contents 2
PAL video input standard 110
passwords
creating/changing 90-92
incorrect/forgotten 92,
127, 128
locked channels and 89
removing 92
PICT files, saving images as 99
picture quality
adjusting brightness,
sharpness, contrast,
and color 80
compression and 103
playing back a radio
recording 69
ports
audio out 36-41
composite video (RCA-
type) 35
FM tuner 22, 30
sound input 38, 41
S-video 35, 40, 41
TV tuner 24, 32, 129, 132
video input card 3, 38, 41
video out 35, 37, 38,
40, 132

138

power card 6
power switch on a compact
computer 6, 22
Preferences dialog box
103, 116
Preferences (Options
menu/Apple FM Radio)
58-59, 62-63, 66-67
Preferences (Setup
menu/Apple Video
Player) 103
preset radio station buttons
48, 52-53, 58-59
preset radio stations
assigning 53-57
changing 59
displaying list of 55
tuning in to 48-49, 52
Preset Stations window

54-57

programming channels
82-86

QuickTime movies,
capturing video
sequences as 100-102

radio

controlling with the

remote control
112-113

listening to 45-50
recording from 65-69
troubleshooting 119-121
turning on or off

46-47, 51

Index

radio stations
presetting 52-59
tuning in to 48-49, 52
RCA plug connectors 35-38
RCA-type port 35
recording
from the radio 65-69
from the TV or video
equipment 97-103
Record/Stop button in FM
Radio window 67-68
reminders, setting for TV
shows 93-95
remote control
CD-ROM player control
buttons 115
channel controls 77
confirmation of Power Off
setting 116
disabling 116
FM radio control buttons
112-113
functions of 111
troubleshooting 120, 123
TV/MAC button 72, 81,
97, 105
TVWideo control
buttons 114
using 111-115
volume controls 49, 78
removing
access cover for the
TV/FM tuner 14-15
the logic board from a
compact computer
6-10
names from channels 87
TV channels from the list
83-85
TV reminders 95

Index

reset button on logic board
17, 24
restoring TV channels to the
list 85-86
ribbon cable, attaching to the
card
on a compact computer
11-12
on a modular computer
28-29

SAP. See Second Audio
Program
Save Audio Recording dialog
box 69
saving
recordings from the
radio 69
a video frame on disk 99
scrambled TV signals 84
screen controls 75-76, 80
searching for clearest radio
stations 48, 56
SECAM video input
standard 110
secondary monitor,
connection
problems 125
Second Audio Program (SAP)
sound mode, selecting
for TV/Video 78-79
security screws
on a compact computer
7,21
ona modular computer
27, 29
Seek feature for radio
stations 48, 61, 121

139

sequences of video images,
capturing 100-103
Set Channel Password,
(Setup menu/Apple
Video Player) 90-92
Set Channel Password dialog
box 90
Setup menu (Apple Video
Player)
Channel Setup
82-89, 127
Hot Key 96
Preferences 103, 116
Set Channel Password
90-92
TV Reminders 93-95
sharpness of picture,
adjusting 80
sheet metal logic board
tray 13
Show Balloons 47, 73
Show Controls Window
(Windows menu/Apple
Video Player) 75,
78-80, 98-101, 106
Shut Down (Special menu)
6, 22, 26, 30
signal range and strength,
setting 60-61,
120, 121
single video images,
capturing 98-99
size box, using to change
video window size 109
size of video window,
changing 107-109

140

slider
on the FM Radio
Preferences dialog
box 66
on the FM Radio
window 49
on the Screen Controls
window 80
on the Sound Controls
window 79
on the video window
77, 128
sound. See volume
sound controls 80
sound input ports 38, 41
sound mode
for the FM radio 50
for TVWideo 78-79
Sound (Options menu/Apple
FM Radio) 50
source for video, choosing
75-16
speaker balance and tone,
adjusting for
TVWvideo 79
Special menu, Shut Down 6,
22, 26, 30
static electricity, avoiding
generating 6, 26
static on TV, troubleshooting
124, 126
Step feature for radio
stations 49
stereophonic (stereo) sound
selecting for the FM
radio 50
selecting for TV/video
78-79

Index

stopping recording
from the radio 68-69
from the TV or video 101
S-video, choosing as video
source 75-76
S-video connectors 35,
39-41
S-video ports 35, 40, 41
system software floppy disks
or CD
installing Apple FM Radio
from 118-119
installing Apple Video
Player from 122-123

Tab key, to move between
channels 77
television. See TV
text tracks for closed
captions 106-107
treble, adjusting for
TV/video 79
troubleshooting
cable service TV
connection 127
can’t see closed captions
128-129
forgotten password 127,
128
installing Apple FM Radio
118-119
installing Apple Video
Player 122-123
Names pop-up menu
doesn’t appear on
video window 127
radio reception
problems 120

Index

radio sound problems
119-120
remote control doesn’t
work 120-121,
123-124
screen control
adjustments 125
Seek or Auto Add
feature 121
switching modes using
keyboard shortcuts
127
TV reception problems
124-125
TV sound problems 126
using a secondary
monitor 125
voltage output of video
equipment 125, 126
volume slider doesn’t
appear on video
window 128
tuning in to stations on the
FM radio 48-49, 52
turning off
the computer using the
remote control 112,
114, 115
the FM radio 47,51
the remote control 116
virtual memory 100
turning on
Apple Video Player 72, 74,
81, 96, 97, 105
Apple Video Player using a
hot key 74, 96
the computer using the
remote control 112,
114, 115
the FM radio 46, 51

141

TV
choosing a connection
type 82-83
choosing as video source
75-76
controlling with the
remote control 114
recording from 97-103
troubleshooting 122-129
watching 71-80
TV antenna
attaching to a compact
computer 24
attaching to a modular
computer 32
TV/EM Software Install Disk 1
42, 43, 118-119,
122-123
TV images, capturing
97-103
TV/MAC button on remote
control 72, 81, 97,
105, 123
TV Reminders dialog box 93
TV Reminders (Setup
menu/Apple Video
Player) 93-95
TV tuner port 24, 32,
129, 132

undoing changes 59, 63, 95

unfreezing/freezing a video
image 99

unlocking/locking channels
77, 88-89

142

Verify Channel Password
dialog box 90, 91
vertical plate 17
video
choosing as video source
75-76
controlling with the
remote control 114
recording from 97-103
troubleshooting 122-129
watching 71-80
video equipment
connecting for closed
caption viewing 23, 31,
129, 131-132
connecting to your
computer 34-41
controlling with the
remote control 115
voltage output of
125, 126
video images, capturing
97-103
video input card, checking
for 3
deo input card ports 3, 38,
39, 40, 41
deo input standard,
changing 110, 124
deo out ports on video
equipment 35, 37, 38,
40, 132
video screen controls
75, 125
video source, choosing
75-76

Index

video window
adjusting TV viewing
76-78
changing the size of
107-109
Names pop-up menu
doesn’t appear 127
viewing channel names
76, 86
video window size,
movie disk storage
requirements and 102
viewing. See also displaying
closed captions on a
videotape 23, 31, 129,
131-132
a movie you’ve
captured 101
names of channels 76, 86
virtual memory, video
capture and 100
voltage output of
video equipment,
troubleshooting
125, 126
volume, adjusting
for capturing movies 100
for the FM radio 49, 120
for a radio recording 69
for TV/video 77-78, 126
volume buttons on the
computer 49, 77
volume controls on the
remote control 49, 78

Index

W, X

warranty on your Apple
equipment 117

wide (DX) range, choosing
for radio stations 60

Windows menu (Apple Video
Player), Show Controls
Window 75, 78-80,

98-101, 106

wire handle on logic board
10, 16

Y-adapter audio cables 36,
37, 39, 40

zoom box, using to change
the video window
size 108

143

Apple Computer, Inc.

1 Infinite Loop

Cupertino, California 95014-2084 030-8507-A
408.996.1010 Printed in U.S.A.

Related across Profoundd

Oregon Climate Docs

Grants Pass — Sustainability and Energy Action Plan p.193
REFERENCES GRANTS PASS SUSTAINABILITY AND ENERGY ACTION PLAN Texas A&M Agrilife Extension. Insects in the City. Retrieved 2023 from https://citybugs.tamu.edu/factsheets/ipm/what -is-a-neonicotinoid/ TONO GroAdup . (202…
Ashland — Climate and Energy Action Plan (CEAP) p.182
APPENDIX A. OPEN HOU SE STATION RESPONSES Ashland Climate and Energy Action Plan: Baseline Public Input Summary Page | 11  More actions on stream restoration – (floods, fish, conservation)  More awareness thro…
Grants Pass — Sustainability and Energy Action Plan p.175
GLOSSARY GRANTS PASS SUSTAINABILITY AND ENERGY ACTION PLAN knowledge, ideas, inspiration, creativity, recreation, and spirituality. Supporting services include fundamental processes that sustain life such as photosynthe…

WEF Publications

Matching Talent to the Jobs of Tomorrow A Guidebook for Public Employment Services 2025 p.30
Glossary (1/4) Term Generic definition Applied to job matching Agent An agent is an autonomous AI unit that communicates with other agents, makes decisions, and plans and performs tasks. It is customizable for integrati…
Matching Talent to the Jobs of Tomorrow A Guidebook for Public Employment Services 2025 p.32
Glossary (3/4) Term Generic definition Applied to job matching Learning experience platforms (LXP)Platforms that deliver personalized learning experiences to users by using AI to recommend learning resources based on t…
Unmasking Cybercrime Strengthening Digital Identity Verification against Deepfakes 2026 p.12
Injection method classification Three injection approaches were observed and used to classify the evaluated tools: • App-level injection: Four tools performed injection by intercepting camera application programming i…

Epstein Files

EFTA01111436 — Operating Your System
Operating Your System With The Genesis MX-900 COMPLETE' CONTROL # Universal Remote Control EFTA01111436 This remote control was Custom Programmed for you by: For questions about your Custom Programming call: Custom Progr…
EFTA01225142 — SOFTWARE HOUSE From Tyco Security Products
SOFTWARE HOUSE From Tyco Security Products C•CURE 9000 Version 2.50 11,303C0 EFTA01225142 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed …
EFTA01224878 — SOFTWARE HOUSE From Tyco Security Products
SOFTWARE HOUSE From Tyco Security Products EFTA01224878 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed on this document are registered in…

Federal Writers' Project

[Vermont Quarrying]
F. tragyton Ve Nxit Urlters' Project Veriuit 4 nTlw L. 'Awls Ur, "I don't care much for paper work. A hard -muscled Irish stonecutter had spoken. lie looked at the gray granite walls and golden dome of the Vermont State …
[Mrs. Virginia S. W. Williamson]
,s Fibrumry 27, 1940. Life History Mrs. V. S. Williamson, Room 609, Dyal-Upchuroh Building, Jaaksonville, Ylorida, fersonal Interview (Revised and corrected) Ross Shepherd, writer MSB. VIRGINIA S. W. WILLIAMSON (MU. ALBA…
[Mistress of Magnolia Hall]
Project P•1655 ClIalmere S. Nurray Edisto Island,. :1. O. lanT X= OF LAGNOLIA Ful4LA AJJ STORY. EverythinL was quiet when I drove up. A few Ne6roes were m -vin listlessly about the cotton arbor, and a mangy mouse. colore…

Recent News

Robert J. Benjamin
Robert J. Benjamin 740 Emigrant Creek Road Ashland, OR 97520 (541)488-3827(home) (503)757-8938 (cellular) [email protected]   Systems analyst/technical writer with an understanding of programming, computer graphics,…
Music Videos May Be Coming to iPods
NEW YORK – An iPod (search) with video? Apple Computer Inc. (search) has been talking to several major recording companies, looking to license the sale of music videos through the popular iTunes Music (search) Store, The…
Ashland Daily Tidings :: Microsoft to charge $249.99 for Zune player, due in Nov. :: September 30, 2006
http:// --> Ashland, Oregon HOME Valley & State Sports Nation & World Opinion/Editorial Classifieds Business Columnists Local Issues Obituaries Weather Archive Revels Etcetera Backpage Hot Topics Most Viewed Forum Photo …